mutex subsystem, add atomic_*_call_if_*() to i386

add two new atomic ops to i386: atomic_dec_call_if_negative() and atomic_inc_call_if_nonpositive(), which are conditional-call-if atomic operations. Needed by the new mutex code.

----

 include/asm-i386/atomic.h |   55 ++++++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 55 insertions(+)

Index: linux/include/asm-i386/atomic.h
===================================================================
@@ -240,6 +240,61 @@ static __inline__ int atomic_sub_return(
 #define atomic_inc_return(v)  (atomic_add_return(1,v))
 #define atomic_dec_return(v)  (atomic_sub_return(1,v))
 
+/**
+ * atomic_dec_call_if_negative - decrement and call function if negative
+ * @v: pointer of type atomic_t
+ * @fn: function to call if the result is negative
+ *
+ * Atomically decrements @v and calls a function if the result is negative.
+ */
+#define atomic_dec_call_if_negative(v, fn_name)				\
+do {									\
+	fastcall void (*__tmp)(atomic_t *) = fn_name;			\
+									\
+	(void)__tmp;							\
+	typecheck(atomic_t *, v);					\
+									\
+	__asm__ __volatile__(						\
+		LOCK "decl (%%eax)\n"  					\
+		"js 2f\n"						\
+		"1:\n"							\
+		LOCK_SECTION_START("")					\
+		"2: call "#fn_name"\n\t"				\
+		"jmp 1b\n"						\
+		LOCK_SECTION_END					\
+		:							\
+		:"a" (v)						\
+		:"memory","cx","dx");					\
+} while (0)
+
+/**
+ * atomic_inc_call_if_nonpositive - increment and call function if nonpositive
+ * @v: pointer of type atomic_t
+ * @fn: function to call if the result is nonpositive
+ *
+ * Atomically increments @v and calls a function if the result is nonpositive.
+ */
+#define atomic_inc_call_if_nonpositive(v, fn_name)			\
+do {									\
+	fastcall void (*__tmp)(atomic_t *) = fn_name;			\
+									\
+	(void)__tmp;							\
+	typecheck(atomic_t *, v);					\
+									\
+	__asm__ __volatile__(						\
+		LOCK "incl (%%eax)\n"  					\
+		"jle 2f\n"						\
+		"1:\n"							\
+		LOCK_SECTION_START("")					\
+		"2: call "#fn_name"\n\t"				\
+		"jmp 1b\n"						\
+		LOCK_SECTION_END					\
+		:							\
+		:"a" (v)						\
+		:"memory","cx","dx");					\
+} while (0)
+
+
 /* These are x86-specific, used by some header files */
 #define atomic_clear_mask(mask, addr) \
 __asm__ __volatile__(LOCK "andl %0,%1" \

Umm. This asm is broken. It doesn't mark %eax as changed, so this is only reliable if the function you call is

- a "fastcall" one
- always returns as its return value the pointer to the atomic count

which is not true (you verify that it's a fastcall, but it's of type "void").

Now, it's entirely possible that it's only used in situations where the compiler doesn't rely on the value of %eax after the asm anyway, but that's just praying. Either mark the value as being changed, or just save/restore the registers. Ie either something like

	__asm__ __volatile__(
		LOCK "decl (%0)\n\t"
		"js 2f\n"
		"1:\n"
		LOCK_SECTION_START("")
		"2: call "#fn_name"\n\t"
		"jmp 1b\n"
		LOCK_SECTION_END
		:"=a" (dummy)
		:"0" (v)
		:"memory","cx","dx");

or just do

	__asm__ __volatile__(
		LOCK "decl (%0)\n\t"
		"js 2f\n"
		"1:\n"
		LOCK_SECTION_START("")
		"pushl %%ebx\n\t"
		"pushl %%ecx\n\t"
		"pushl %%eax\n\t"
		"call "#fn_name"\n\t"
		"popl %%eax\n\t"
		"popl %%ecx\n\t"
		"popl %%ebx\n\t"
		"jmp 1b\n"
		LOCK_SECTION_END
		:/* no outputs */
		:"a" (v)
		:"memory");

or some in-between thing (that saves only part of the registers).

The above has not been tested in any way, shape or form. But you get the idea.

Linus

Actually (and re-reading the email I sent that wasn't obvious at all), my _preferred_ fix is to literally force the use of the above kind of
function: not save/restore %eax at all, but just say that any function that is called by the magic "atomic_*_call_if()" needs to always return the argument it gets as its return value too.

That allows the caller to not even have to care. And the callee obviously already _has_ that value, so it might as well return it (and in the best case it's not going to add any cost at all, either to the caller or the callee).

So you might opt to keep the asm the same, just change the calling conventions.

Linus

ok, i've added this fix, thanks. Right now we dont do anything after those functions (that's probably how the bug never showed up), but at least one interim stage i tried to use the call_if functions at other places too, so the potential is there.

Ingo

This new macro is only going to be used in x86-specific files, right? There's no practical way to implement this on lots of other architectures.

Embedding a call in asm("") can break other things too - for instance, unwind tables could become inaccurate.

Daniel Jacobowitz
CodeSourcery, LLC

The default implementation does the call in C.

I doubt unwind tables are used at all for the kernel, are they?

Nicolas

Yes they are. ia64 absolutely requires accurate unwind tables, it is part of the ABI. x86_64 is tending towards requiring accurate CFI data.

Without valid unwind tables, backtraces are flakey at best. The lack of decent kernel unwind for i386 is one of the reasons that kdb backtrace for i386 is so horrible.

hm, i thought gcc treats all explicitly used register in the asm as clobbered - and i'm using %%eax explicitly for that reason. Or is that only the case if that's an input/output register as well?

Ingo

Nope, they are totally invisible to gcc afaik. It just sees "%%" and changes it into "%", and ignores the rest.

Linus