Skip to contentSkip to conversation

Entire LAN goes boo with 2.5.64

DISCUSSION Anders Widman 2 participants 4 messages Mar 6, 2003

lore
Share & tools
lore
#0 lore raw

Hello,

Trying out the 2.5.64 kernel to try to solve some IDE specific problems with 2.4.x kernels. Now I have another problem. We have a Windows LAN and a Windows XP with WinRoute Pro as gateway.

When booting the linux-machine with the 2.5.64 kernel the windows machine goes to 100% cpu and the switch (Dlink) goes crazy (loosing link, other machines get 100k/s instead of 10-12MiB/s etc).

I compiled the 2.5.64 with as few options as possible, no netfilter, or IPSec or similar stuff.

What can be the problem?

--------
PGP public key: https://tnonline.net/secure/pgp_key.txt

#1 lore raw
Quoted 7 lines

Hello,

Trying out the 2.5.64 kernel to try to solve some IDE specific problems with 2.4.x kernels. Now I have another problem. We have a Windows LAN and a Windows XP with WinRoute Pro as gateway.

Quoted 8 lines

When booting the linux-machine with the 2.5.64 kernel the windows machine goes to 100% cpu and the switch (Dlink) goes crazy (loosing link, other machines get 100k/s instead of 10-12MiB/s etc).

I compiled the 2.5.64 with as few options as possible, no netfilter, or IPSec or similar stuff.

What can be the problem?

Forgot to say I am using a Intel Pro100+ NIC and I have tested with both the Becker driver and the Intel driver.

--------
PGP public key: https://tnonline.net/secure/pgp_key.txt

#2 lore raw
Quoted 11 lines · Anders Widman
Quoted 10 lines

Hello,

Trying out the 2.5.64 kernel to try to solve some IDE specific problems with 2.4.x kernels. Now I have another problem. We have a Windows LAN and a Windows XP with WinRoute Pro as gateway.

When booting the linux-machine with the 2.5.64 kernel the windows machine goes to 100% cpu and the switch (Dlink) goes crazy (loosing link, other machines get 100k/s instead of 10-12MiB/s etc).

Quoted 7 lines
Quoted 4 lines

I compiled the 2.5.64 with as few options as possible, no netfilter, or IPSec or similar stuff.

What can be the problem?

Forgot to say I am using a Intel Pro100+ NIC and I have tested with both the Becker driver and the Intel driver.

I've seen something similar [1] happen to a LAN with one Windows XP machine running vcool: http://vcool.occludo.net/ . This is also available for Linux
(http://vcool.occludo.net/VC_Linux.html). Are you running this patch or a similar one?

[1] all machines were seeing frame errors on packets > 250 bytes; it was a 10 mbit coax lan.

Signature · 1 line
Erik Hensema <[email protected]>
#3 lore raw
Quoted 17 lines
Quoted 16 lines · Anders Widman
Quoted 15 lines

Hello,

Trying out the 2.5.64 kernel to try to solve some IDE specific problems with 2.4.x kernels. Now I have another problem. We have a Windows LAN and a Windows XP with WinRoute Pro as gateway.

When booting the linux-machine with the 2.5.64 kernel the windows machine goes to 100% cpu and the switch (Dlink) goes crazy (loosing link, other machines get 100k/s instead of 10-12MiB/s etc).

I compiled the 2.5.64 with as few options as possible, no netfilter, or IPSec or similar stuff.

What can be the problem?

Quoted 7 lines
Quoted 2 lines

Forgot to say I am using a Intel Pro100+ NIC and I have tested with both the Becker driver and the Intel driver.

I've seen something similar [1] happen to a LAN with one Windows XP machine running vcool: http://vcool.occludo.net/ . This is also available for Linux
(http://vcool.occludo.net/VC_Linux.html). Are you running this patch or a similar one?

Nope, no vcool or anything similar. But it is very odd that the switch would go crazy too!

Quoted 2 lines

[1] all machines were seeing frame errors on packets > 250 bytes; it was a 10 mbit coax lan.

Using 100mbit switched network.

--------
PGP public key: https://tnonline.net/secure/pgp_key.txt