LVM2 on a USB-disk/ same VG name
Hello experts,
I need your advice to save some data: My old laptop died, but I could make the HD work again via a USB-adapter. I attached it to the new Laptop (as well running SuSE 10.0 / lvm2), and the lvm on the USB-Disk is not displayed.
The lvm on the installed system is active:
z60m:~ # pvdisplay /dev/sda8
--- Physical volume ---
PV Name /dev/sda8 VG Name system PV Size 28.75 GB / not usable 0 Allocatable yes PE Size (KByte) 4096 Total PE 7359 Free PE 11 Allocated PE 7348 PV UUID ZdwaLr-anXc-Z7ck-cGI0-oFoW-UluI-F7SZ18
This group is also active:
z60m:~ # lvscan
ACTIVE '/dev/system/daten' [12.70 GB] inherit ACTIVE '/dev/system/home' [8.00 GB] inherit ACTIVE '/dev/system/root' [8.00 GB] inherit
Now, on the USB-disk is a LVM as well:
z60m:~ # pvdisplay /dev/sdb8
--- Physical volume ---
PV Name /dev/sdb8 VG Name system PV Size 17.48 GB / not usable 0 Allocatable yes PE Size (KByte) 4096 Total PE 4475 Free PE 9 Allocated PE 4466 PV UUID P8KDPg-QbME-4Hzc-lw8G-ntOA-1dIv-1DeXmR
vgscan does not activate the group on the USB - due to the same name? z60m:~ # vgchange -a y
3 logical volume(s) in volume group "system" now active
z60m:~ # pvscan
PV /dev/sda8 VG system lvm2 [28.75 GB / 44.00 MB free]
Total: 1 [28.75 GB] / in use: 1 [28.75 GB] / in no VG: 0 [0 ]
z60m:~ # lvscan
ACTIVE '/dev/system/daten' [12.70 GB] inherit ACTIVE '/dev/system/home' [8.00 GB] inherit ACTIVE '/dev/system/root' [8.00 GB] inherit
What is your proposal to activate the USB-lvm group - best without loosing data.....
TIA
Axel
Signature · 2 lines
"Feel free" mit GMX FreeMail! Monat f�r Monat 10 FreeSMS inklusive! http://www.gmx.net
Hi Axel,
vgrename the active one and adjust /etc/fstab appropriately. 'vgscan;vgchange -ay' should gain you access to the USB one then.
Regards,
Heinz -- The LVM Guy --
Quoted 50 lines · Axel Braun
Hello experts,
I need your advice to save some data: My old laptop died, but I could make the HD work again via a USB-adapter. I attached it to the new Laptop (as well running SuSE 10.0 / lvm2), and the lvm on the USB-Disk is not displayed.
The lvm on the installed system is active:
z60m:~ # pvdisplay/dev/sda8
--- Physical volume ---PV Name /dev/sda8 VG Name system PV Size 28.75 GB / not usable 0 Allocatable yes PE Size (KByte) 4096 Total PE 7359 Free PE 11 Allocated PE 7348 PV UUID ZdwaLr-anXc-Z7ck-cGI0-oFoW-UluI-F7SZ18This group is also active:
z60m:~ # lvscanACTIVE '/dev/system/daten' [12.70 GB] inherit ACTIVE '/dev/system/home' [8.00 GB] inherit ACTIVE '/dev/system/root' [8.00 GB] inheritNow, on the USB-disk is a LVM as well:
z60m:~ # pvdisplay/dev/sdb8
--- Physical volume ---PV Name /dev/sdb8 VG Name system PV Size 17.48 GB / not usable 0 Allocatable yes PE Size (KByte) 4096 Total PE 4475 Free PE 9 Allocated PE 4466 PV UUID P8KDPg-QbME-4Hzc-lw8G-ntOA-1dIv-1DeXmRvgscan does not activate the group on the USB - due to the same name? z60m:~ # vgchange -a y
3 logical volume(s) in volume group "system" now active
z60m:~ # pvscan
PV/dev/sda8VG system lvm2 [28.75 GB / 44.00 MB free]
Total: 1 [28.75 GB] / in use: 1 [28.75 GB] / in no VG: 0 [0 ]
z60m:~ # lvscanACTIVE '/dev/system/daten' [12.70 GB] inherit ACTIVE '/dev/system/home' [8.00 GB] inherit ACTIVE '/dev/system/root' [8.00 GB] inherit
Quoted 15 lines
What is your proposal to activate the USB-lvm group - best without loosing data.....
TIA
AxelSignature · 8 lines
"Feel free" mit GMX FreeMail! Monat f?r Monat 10 FreeSMS inklusive! http://www.gmx.net _______________________________________________ linux-lvm mailing list [email protected] https://www.redhat.com/mailman/listinfo/linux-lvm read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
*** Software bugs are stupid.
Nevertheless it needs not so stupid people to solve them ***
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Heinz Mauelshagen Red Hat GmbH
Consulting Development Engineer Am Sonnenhang 11
Cluster and Storage Development 56242 Marienrachdorf
Germany
[email protected] +49 2626 141200
FAX 924446=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Hello Heinz,
Quoted 2 lines
vgrename the active one and adjust
/etc/fstabappropriately. 'vgscan;vgchange -ay' should gain you access to the USB one then.
After deactivation I could change the name, but after the reboot the dm-mapper was still looking for the old volume group 'system'. I tried to boot the rescue system, maybe the inittab needed a refresh - but that did not work.
unfortunately Suse's system repair cant deal with LVM, so my best idea was to change everything back.
Cheers
Axel
Signature · 2 lines
Echte DSL-Flatrate dauerhaft f�r 0,- Euro*! "Feel free" mit GMX DSL! http://www.gmx.net/de/go/dsl
Quoted 9 lines · Axel Braun
Hello Heinz,
Quoted 2 lines
vgrename the active one and adjust
/etc/fstabappropriately. 'vgscan;vgchange -ay' should gain you access to the USB one then.After deactivation I could change the name, but after the reboot the dm-mapper was still looking for the old volume group 'system'. I tried to boot the rescue system, maybe the inittab needed a refresh - but that did not work.
Did you change /etc/fstab ?
Heinz
Quoted 9 lines
unfortunately Suse's system repair cant deal with LVM, so my best idea was to change everything back.
Cheers
AxelSignature · 2 lines
Echte DSL-Flatrate dauerhaft f?r 0,- Euro*! "Feel free" mit GMX DSL! http://www.gmx.net/de/go/dsl
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Heinz Mauelshagen Red Hat GmbH
Consulting Development Engineer Am Sonnenhang 11
Cluster and Storage Development 56242 Marienrachdorf
Germany
[email protected] +49 2626 141200
FAX 924446=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Hallo Heinz,
Quoted 11 lines
Quoted 5 lines
Quoted 2 lines
vgrename the active one and adjust
/etc/fstabappropriately. 'vgscan;vgchange -ay' should gain you access to the USB one then.After deactivation I could change the name, but after the reboot the dm-mapper was still looking for the old volume group 'system'. I tried
to
Quoted 1 line
boot the rescue system, maybe the inittab needed a refresh - but that
did
Quoted 1 line
not work.
Did you change
/etc/fstab?
yes, even before I changed the vgname
Ax
Signature · 2 lines
"Feel free" mit GMX FreeMail! Monat f�r Monat 10 FreeSMS inklusive! http://www.gmx.net
Solved: [linux-lvm] LVM2 on a USB-disk/ same VG name
In reply to Heinz MauelshagenHallo Heinz,
** Reply to message from Heinz Mauelshagen <[email protected]> on Thu, 9 Mar 2006 14:31:01 +0100
Quoted 6 lines · Axel Braun
Quoted 5 lines
Hello Heinz,
Quoted 2 lines
vgrename the active one and adjust
/etc/fstabappropriately. 'vgscan;vgchange -ay' should gain you access to the USB one then.
Quoted 6 lines
Quoted 4 lines
After deactivation I could change the name, but after the reboot the dm-mapper was still looking for the old volume group 'system'. I tried to boot the rescue system, maybe the inittab needed a refresh - but that did not work.
Did you change
/etc/fstab?
The missing element was: Change settings for bootloader (/boot/grub/menu.lst)
The way it worked for me:
- change settings in /etc/fstab and /boot/grub/menu.lst
- boot the rescue system from CD (otherwise the volume groups are still active)
- do a vgrename / vgsan
- reboot
Cheers
Axel
Signature · 6 lines
Dr.-Ing. Axel K. Braun Mobile: +49.173.7003.154 VoIP/Skype: axxite To lead the people, walk behind them. (Lao Tse)