drm/i915: Add i915.dp_limit_max_lane_count driver option.
Subsystems (2)
PATCH 1/1 drm/i915: Add i915.dp_limit_max_lane_count driver option.
Since 2514bc510d0c3aadcc5204056bb440fa36845147, the intel_dp_mode_fixup function prefers lane count over frequency. That causes problems on hardware that has less working lanes than it reports. This option allows to workaround such hardware bugs.
---
This is workaround for hardware issues uncovered by this commit:
commit 2514bc510d0c3aadcc5204056bb440fa36845147
Author: Jesse Barnes <[email protected]>
Date: Thu Jun 21 15:13:50 2012 -0700
drm/i915: prefer wide & slow to fast & narrow in DP configs
High frequency link configurations have the potential to cause trouble with long and/or cheap cables, so prefer slow and wide configurations instead. This patch has the potential to cause trouble for eDP configurations that lie about available lanes, so if we run into that we can make it conditional on eDP.
I have IBM POS machine (4852-570 Truman) that has internal monitor connected over display port. It reports to have 2 lanes, but only 1 lane works reliably. With 2 lanes used, the monitor sometimes doesn't turn on. It seems that this is hardware issue specific for this model.
Quoted 1 line
From discussion that was around the
2514bc510d0c3aadcc5204056bb440fa36845147
commit I understand there are more machines that have similar problems. This option can be used to solve them.
---
drivers/gpu/drm/i915/i915_drv.c | 6 ++++++ drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/intel_dp.c | 15 +++++++++++++-- 3 files changed, 20 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/i915_drv.c +0 -0
@@ -123,6 +123,12 @@ module_param_named(preliminary_hw_support,
i915_preliminary_hw_support, int, 060
MODULE_PARM_DESC(preliminary_hw_support,
"Enable preliminary hardware support. (default: false)");
+int i915_dp_limit_max_lane_count __read_mostly = -1; +module_param_named(dp_limit_max_lane_count, i915_dp_limit_max_lane_count, int, 0600);
+MODULE_PARM_DESC(dp_limit_max_lane_count,
+ "Limit the maximal number of used display port lanes. "
+ "(default: -1 (no limit))");
+
static struct drm_driver driver;
extern int intel_agp_enabled;
drivers/gpu/drm/i915/i915_drv.h +1 -0
@@ -1398,6 +1398,7 @@ extern int i915_enable_fbc __read_mostly;extern bool i915_enable_hangcheck__read_mostly ;extern int i915_enable_ppgtt__read_mostly ;extern unsigned int i915_preliminary_hw_support__read_mostly ; +extern int i915_dp_limit_max_lane_count__read_mostly ;extern int i915_suspend (struct drm_device *dev,pm_message_t state);extern int i915_resume (struct drm_device *dev);
drivers/gpu/drm/i915/intel_dp.c +0 -0
@@ -132,6 +132,17 @@ intel_edp_target_clock(struct intel_encoder
*intel_encoder,
return mode->clock;
}
+static inline u8
+intel_dp_max_lane_count(u8 dpcd[DP_RECEIVER_CAP_SIZE])
+{
+ u8 max_lane_count = drm_dp_max_lane_count(dpcd);
+
+ if(i915_dp_limit_max_lane_count != -1 && max_lane_count >i915_dp_limit_max_lane_count)
+ max_lane_count = i915_dp_limit_max_lane_count;
+
+ return max_lane_count;
+}
+
static int
intel_dp_max_link_bw(struct intel_dp *intel_dp)
{
@@ -184,7 +195,7 @@ intel_dp_adjust_dithering(struct intel_dp *intel_dp,
{
int max_link_clock =
drm_dp_bw_code_to_link_rate(intel_dp_max_link_bw(intel_dp));
- int max_lanes = drm_dp_max_lane_count(intel_dp->dpcd);
+ int max_lanes = intel_dp_max_lane_count(intel_dp->dpcd);
int max_rate, mode_rate;
mode_rate = intel_dp_link_required(mode->clock, 24);
@@ -697,7 +708,7 @@ intel_dp_mode_fixup(struct drm_encoder *encoder,
struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
struct intel_connector *intel_connector = intel_dp->attached_connector; int lane_count, clock;
- int max_lane_count = drm_dp_max_lane_count(intel_dp->dpcd);
+ int max_lane_count = intel_dp_max_lane_count(intel_dp->dpcd);
int max_clock = intel_dp_max_link_bw(intel_dp) == DP_LINK_BW_2_7 ? 1 : 0; int bpp, mode_rate;
static int bws[2] = { DP_LINK_BW_1_62, DP_LINK_BW_2_7 };
Signature · 1 line
1.7.7
Quoted 21 lines · Michal Srb
Since
2514bc510d0c3aadcc5204056bb440fa36845147, theintel_dp_mode_fixupfunction prefers lane count over frequency. That causes problems on hardware that has less working lanes than it reports. This option allows to workaround such hardware bugs.Signed-off-by Michal Srb <[email protected]>---
This is workaround for hardware issues uncovered by this commit:commit
2514bc510d0c3aadcc5204056bb440fa36845147
Author: Jesse Barnes <[email protected]>
Date: Thu Jun 21 15:13:50 2012 -0700drm/i915: prefer wide & slow to fast & narrow in DP configs
High frequency link configurations have the potential to cause trouble with long and/or cheap cables, so prefer slow and wide configurations instead. This patch has the potential to cause trouble for eDP configurations that lie about available lanes, so if we run into that we can make it conditional on eDP.
Quoted 8 lines
I have IBM POS machine (4852-570 Truman) that has internal monitor connected over display port. It reports to have 2 lanes, but only 1 lane works reliably. With 2 lanes used, the monitor sometimes doesn't turn on. It seems that this is hardware issue specific for this model.
From discussion that was around the
2514bc510d0c3aadcc5204056bb440fa36845147commit I understand there are more machines that have similar problems. This option can be used to solve them.
It sounds like we need to start with a DPCD quirk database ... Ajax? -Daniel
Quoted 88 lines
---
drivers/gpu/drm/i915/i915_drv.c | 6 ++++++ drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/intel_dp.c | 15 +++++++++++++-- 3 files changed, 20 insertions(+), 2 deletions(-)drivers/gpu/drm/i915/i915_drv.c +0
-0@@ -123,6 +123,12 @@ module_param_named(preliminary_hw_support,
i915_preliminary_hw_support, int, 060
MODULE_PARM_DESC(preliminary_hw_support,"Enable preliminary hardware support. (default: false)");drivers/gpu/drm/i915/i915_drv.c +2
-0+int i915_dp_limit_max_lane_count__read_mostly =-1 ; +module_param_named(dp_limit_max_lane_count, i915_dp_limit_max_lane_count,int, 0600);
drivers/gpu/drm/i915/i915_drv.c +4
-0+MODULE_PARM_DESC (dp_limit_max_lane_count, +"Limit the maximal number of used display port lanes. " +"(default: -1 (no limit))" ); +static struct drm_driver driver;extern int intel_agp_enabled;drivers/gpu/drm/i915/i915_drv.h +1
-0@@ -1398,6 +1398,7 @@ extern int i915_enable_fbc __read_mostly;extern bool i915_enable_hangcheck__read_mostly ;extern int i915_enable_ppgtt__read_mostly ;extern unsigned int i915_preliminary_hw_support__read_mostly ; +extern int i915_dp_limit_max_lane_count__read_mostly ;extern int i915_suspend (struct drm_device *dev,pm_message_t state);extern int i915_resume (struct drm_device *dev);drivers/gpu/drm/i915/intel_dp.c +11
-0@@ -132,6 +132,17 @@ intel_edp_target_clock(struct intel_encoder *intel_encoder, return mode->clock; } +static inline u8 +intel_dp_max_lane_count (u8 dpcd[DP_RECEIVER_CAP_SIZE ]) +{ +u8 max_lane_count =drm_dp_max_lane_count (dpcd); + +if (i915_dp_limit_max_lane_count !=-1 && max_lane_count > i915_dp_limit_max_lane_count) + max_lane_count = i915_dp_limit_max_lane_count; + +return max_lane_count; +} + static int
intel_dp_max_link_bw(struct intel_dp *intel_dp)
{drivers/gpu/drm/i915/intel_dp.c +2
-3@@ -184,7 +195,7 @@ intel_dp_adjust_dithering(struct intel_dp *intel_dp, {int max_link_clock =drm_dp_bw_code_to_link_rate (intel_dp_max_link_bw (intel_dp)); -int max_lanes =drm_dp_max_lane_count (intel_dp->dpcd); +int max_lanes =intel_dp_max_lane_count (intel_dp->dpcd);int max_rate, mode_rate; mode_rate =intel_dp_link_required (mode->clock,24 );@@ -697,7 +708,7 @@ intel_dp_mode_fixup(struct drm_encoder *encoder,struct intel_dp *intel_dp =enc_to_intel_dp (encoder);struct intel_connector *intel_connector = intel_dp->attached_connector;int lane_count, clock; -int max_lane_count =drm_dp_max_lane_count (intel_dp->dpcd); +int max_lane_count =intel_dp_max_lane_count (intel_dp->dpcd);int max_clock =intel_dp_max_link_bw (intel_dp) ==DP_LINK_BW_2_7 ?1 :0 ;int bpp, mode_rate;static int bws[2 ] = {DP_LINK_BW_1_62 ,DP_LINK_BW_2_7 }; --1.7.7
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 3 lines
Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch
Quoted 6 lines · On Tuesday 26 of March 2013 16:49:30 Daniel Vetter wrote:
Quoted 5 lines · Michal Srb
I have IBM POS machine (4852-570 Truman) that has internal monitor connected over display port. It reports to have 2 lanes, but only 1 lane works reliably. With 2 lanes used, the monitor sometimes doesn't turn on. It seems that this is hardware issue specific for this model.
Quoted 7 lines
Quoted 4 lines
From discussion that was around the
2514bc510d0c3aadcc5204056bb440fa36845147commit I understand there are more machines that have similar problems. This option can be used to solve them.It sounds like we need to start with a DPCD quirk database ... Ajax? -Daniel
Any update?
DPCD of this monitor is 10 0a 82 40 00 00 01 00 02 00 00 00 10 01 00 by the way.
Is the i915.dp_limit_max_lane_count unacceptable even as temporary workaround?
Michal Srb