PM / wakeirq: Fix unbalanced irq enable for wakeirq
Subsystems (4)
PATCH 1/1 PM / wakeirq: Fix unbalanced irq enable for wakeirq
If a device is runtime PM suspended when we enter suspend and has a dedicated wake irq, we can get the following warning:
WARNING: CPU: 0 PID: 108 at kernel/irq/manage.c:526 enable_irq+0x40/0x94 [ 102.087860] Unbalanced enable for IRQ 147
...
(enable_irq) from [<c06117a8>] (dev_pm_arm_wake_irq+0x4c/0x60) (dev_pm_arm_wake_irq) from [<c0618360>]
(device_wakeup_arm_wake_irqs+0x58/0x9c)
(device_wakeup_arm_wake_irqs) from [<c0615948>] (dpm_suspend_noirq+0x10/0x48)
(dpm_suspend_noirq) from [<c01ac7ac>] (suspend_devices_and_enter+0x30c/0xf14) (suspend_devices_and_enter) from [<c01adf20>] (enter_state+0xad4/0xbd8)
(enter_state) from [<c01ad3ec>] (pm_suspend+0x38/0x98) (pm_suspend) from [<c01ab3e8>] (state_store+0x68/0xc8)
This is because the dedicated wake irq for the device may have been already enabled earlier by dev_pm_enable_wake_irq_check(). Fix the issue by checking for runtime PM suspended status.
This issue can be easily reproduced by setting serial console log level to zero, letting the serial console idle, and suspend the system from an ssh terminal. On resume, dmesg will have the warning above.
The reason why I have not ran into this issue earlier has been that I typically run my PM test cases from on a serial console instead over ssh.
--- drivers/base/power/wakeirq.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/base/power/wakeirq.c +4 -2
@@ -321,7 +321,8 @@ void dev_pm_arm_wake_irq(struct wake_irq *wirq)return ;if (device_may_wakeup (wirq->dev)) { -if (wirq->status &WAKE_IRQ_DEDICATED_ALLOCATED ) +if (wirq->status &WAKE_IRQ_DEDICATED_ALLOCATED && + !pm_runtime_status_suspended (wirq->dev))enable_irq (wirq->irq);enable_irq_wake (wirq->irq);
@@ -343,7 +344,8 @@ void dev_pm_disarm_wake_irq(struct wake_irq *wirq)if (device_may_wakeup (wirq->dev)) {disable_irq_wake (wirq->irq); -if (wirq->status &WAKE_IRQ_DEDICATED_ALLOCATED ) +if (wirq->status &WAKE_IRQ_DEDICATED_ALLOCATED && + !pm_runtime_status_suspended (wirq->dev))disable_irq_nosync (wirq->irq); } }
Signature · 1 line
2.16.1
Rafael J. Wysocki
AppliedQuoted 53 lines · CET Tony Lindgren
If a device is runtime PM suspended when we enter suspend and has a dedicated wake irq, we can get the following warning:
WARNING: CPU: 0 PID: 108 at kernel/irq/manage.c:526 enable_irq+0x40/0x94 [ 102.087860] Unbalanced enable for IRQ 147...
(enable_irq) from [<c06117a8>] (dev_pm_arm_wake_irq+0x4c/0x60) (dev_pm_arm_wake_irq) from [<c0618360>]
(device_wakeup_arm_wake_irqs+0x58/0x9c)
(device_wakeup_arm_wake_irqs) from [<c0615948>] (dpm_suspend_noirq+0x10/0x48)
(dpm_suspend_noirq) from [<c01ac7ac>] (suspend_devices_and_enter+0x30c/0xf14) (suspend_devices_and_enter) from [<c01adf20>] (enter_state+0xad4/0xbd8)
(enter_state) from [<c01ad3ec>] (pm_suspend+0x38/0x98) (pm_suspend) from [<c01ab3e8>] (state_store+0x68/0xc8)This is because the dedicated wake irq for the device may have been already enabled earlier by
dev_pm_enable_wake_irq_check(). Fix the issue by checking for runtime PM suspended status.This issue can be easily reproduced by setting serial console log level to zero, letting the serial console idle, and suspend the system from an ssh terminal. On resume, dmesg will have the warning above.
The reason why I have not ran into this issue earlier has been that I typically run my PM test cases from on a serial console instead over ssh.
Fixes c84345597558 ("PM / wakeirq: Enable dedicated wakeirq for suspend")Cc Brian Norris <[email protected]>Cc Grygorii Strashko <[email protected]>Cc Ulf Hansson <[email protected]>Signed-off-by Tony Lindgren <[email protected]>--- drivers/base/power/wakeirq.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)drivers/base/power/wakeirq.c +2
-1@@ -321,7 +321,8 @@ void dev_pm_arm_wake_irq(struct wake_irq *wirq)return ;if (device_may_wakeup (wirq->dev)) { -if (wirq->status &WAKE_IRQ_DEDICATED_ALLOCATED ) +if (wirq->status &WAKE_IRQ_DEDICATED_ALLOCATED && + !pm_runtime_status_suspended (wirq->dev))enable_irq (wirq->irq);enable_irq_wake (wirq->irq);
drivers/base/power/wakeirq.c void dev_pm_disarm_wake_irq(struct wake_irq *wirq) · line 351
Quoted 9 lines
drivers/base/power/wakeirq.c +2
-1@@ -343,7 +344,8 @@ void dev_pm_disarm_wake_irq(struct wake_irq *wirq)if (device_may_wakeup (wirq->dev)) {disable_irq_wake (wirq->irq); -if (wirq->status &WAKE_IRQ_DEDICATED_ALLOCATED ) +if (wirq->status &WAKE_IRQ_DEDICATED_ALLOCATED && + !pm_runtime_status_suspended (wirq->dev))disable_irq_nosync (wirq->irq); } }
Applied, thanks!