Swap/DB devices (fwd)
Quoted 7 lines · Stephen Tweedie
Quoted 2 lines · Heinz Mauelshagen
Quoted 2 lines
I'm curious: why? I would have thought that LVM should support any requests coming in through
ll_rw_blockalready.
Quoted 8 lines
Quoted 3 lines
It's simply a matter of userland (
lv_create_node()and friends in lvmlib) to create the LVM 'raw' device specials.
Only regular buffer cached device specials are created up to 0.6.You won't need to. The raw device patches create one single new major number, and let you bind the minor numbers to any block devices you want. You can access _any_ block device driver without modification.
The LVM lib creates the device special nodes dynamically if a logical volume is created by lvcreate(8) or found by vgscan(8)/vgimport(8).
LVM function lv_create_node() has to be extended to create the raw device too. The LVM driver can then be accessed by that raw device node _without_ modification.
Heinz
--
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Systemmanagement C/S Deutsche Telekom AG
Entwicklungszentrum Darmstadt
Heinz Mauelshagen Otto-Roehm-Strasse 71c
Senior Systems Engineer Postfach 10 05 41
64205 Darmstadt [email protected] Germany +49 6151 886-425 FAX-386
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Re: [linux-lvm] Swap/DB devices
Hi,
Quoted 6 lines · Heinz Mauelshagen
The LVM lib creates the device special nodes dynamically if a logical volume is created by lvcreate(8) or found by vgscan(8)/vgimport(8).
LVM function
lv_create_node()has to be extended to create the raw device too. The LVM driver can then be accessed by that raw device node _without_ modification.
No, it doesn't work that way. The major/minor numbers for the raw devices are 100% meaningless. Creating a raw device inode is all very well, but it won't do anything AT ALL until you have done a raw ioctl to bind it to a block device.
As long as you can create the LVM block devices either in some known location or with some known block device number, you can then bind a raw device on top without any changes to the driver underneath.
--Stephen