Skip to contentSkip to conversation

vgscan & vgchange -a y location in startup scripts

linux-lvm Eric Smith 2 participants 2 messages Apr 25, 1999

lore
Share & tools
lore

Eric Smith

author
#0 lore raw

On my Alpha, with RedHat 5.2 (SysV style init), where exactly should I put the vgscan and vgchange -a y?

** Should I put it in /etc/init.d/rc.sysinit? And if so, should it be AFTER mounting / and /proc (but before, of course, mounting anything else)?

** Should it be after fsck runs?

I have the kernel patched and lvm installed (with patch) and I'm ready to try it out. But I need to know just where to put vgscan and vgchange -a y!

THANKS!

Regards,

--Eric Smith

#1 lore raw
Quoted 7 lines

On my Alpha, with RedHat 5.2 (SysV style init), where exactly should I put the vgscan and vgchange -a y?

** Should I put it in /etc/init.d/rc.sysinit? And if so, should it be AFTER mounting / and /proc (but before, of course, mounting anything else)?

Yes, put it there.
/ has to mounted (see assumption below), /proc doesn't before running vgscan.

Quoted 7 lines

** Should it be after fsck runs?

I have the kernel patched and lvm installed (with patch) and I'm ready to try it out. But I need to know just where to put vgscan and vgchange -a y!

vgscan accesses /etc/lvmtab.d read/write.
If you want to stay with this directory and its contents in your root filesystem, do a fsck root and a vgscan afterwards followed by the "vgchange -ay".

A script fragment follows from my /sbin/init.d/boot on SuSE. There's a redundand ro mount in it, because SuSEs boot script remounts / rw afterwards again :)

#############################################################################
#
# Find and activate volume groups (HM 1/1/1999)
#
if [ -x /sbin/vgscan -a -x /sbin/vgchange ]; then
while read line; do

      set -- $line
      if [ "$2" = "/" ]; then
         root=$1
         type=$3
         break
      fi

done < /etc/fstab

fsck -y -t $type $root; ret=$?

if [ $ret -eq 0 ]; then
echo "Remounting / read/write for vgscan..." mount -n -o remount,rw /
echo "Scanning for LVM volume groups..." /sbin/vgscan
mount -n -o remount,ro /
echo "Activating LVM volume groups..." /sbin/vgchange -ay
else
echo "Error checking / for vgscan..." >&2
fi
else
echo "Skipping LVM activation..."
fi
#
# End find and activate volume groups (HM) #
#############################################################################

Regards,
Heinz

--

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

Systemmanagement C/S Deutsche Telekom AG
Entwicklungszentrum Darmstadt
Heinz Mauelshagen Otto-Roehm-Strasse 71c
Senior Systems Engineer Postfach 10 05 41

                                                 64205 Darmstadt
[email protected]                      Germany
                                                 +49 6151 886-425
                                                          FAX-386

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-