OF booting of G3-upgraded 7600?
Hi there,
Anybody have any idea why a 7600 upgraded with a littleJoe G3 card can't boot through OF? I always get a 'Default Catch'.
I didn't have the leasure to analyze this further, but anyway FAQ-o-Matic didn't offer any advice.
So far, I've been forced to boot with BootX, which works well, but is a pain in the rear when testing new kernels (through the fact it forces me to copy the new kernel over to MacOS).
As has been reported before, mounting HFS partitions directly can lead to massive filesystem corruption (it happened to me as well... while accidentaly overwriting an existing file), so I'm now moving my kernels through a second machine via FTP....
Thanks
Michel
-------------------------------------------------------------------------
Michel Lanners | " Read Philosophy. Study Art. 23, Rue Paul Henkes | Ask Questions. Make Mistakes. L-1710 Luxembourg | email [email protected] | http://www.cpu.lu/~mlan | Learn Always. "
[[ This message was sent via the linuxppc-dev mailing list. Replies are ]] [[ not forced back to the list, so be sure to Cc linuxppc-dev if your ]] [[ reply is of general interest. Please check http://lists.linuxppc.org/ ]]
[[ and http://www.linuxppc.org/ for useful information before posting. ]]
One simple thing that bit me is that the machine can try to boot before the hard drive hs spun up. This gives the default catch you're seeing, and it depends on CPU speed.
I fixed it with an OpenFirmware change that I haven't bothered to fully understand, but which seems to work great. That is:
set
boot-command
to
begin ['] boot catch 1000 ms cr again
(I got this from some unremembered place on the Web that discusses Open Firmware boot problems...)
-JKL
Quoted 20 lines · Michel Lanners
Hi there,
Anybody have any idea why a 7600 upgraded with a littleJoe G3 card can't boot through OF? I always get a 'Default Catch'.
I didn't have the leasure to analyze this further, but anyway FAQ-o-Matic didn't offer any advice.
So far, I've been forced to boot with BootX, which works well, but is a pain in the rear when testing new kernels (through the fact it forces me to copy the new kernel over to MacOS).
As has been reported before, mounting HFS partitions directly can lead to massive filesystem corruption (it happened to me as well... while accidentaly overwriting an existing file), so I'm now moving my kernels through a second machine via FTP....
Thanks
Quoted 10 lines
Michel
-------------------------------------------------------------------------
Michel Lanners | " Read Philosophy. Study Art. 23, Rue Paul Henkes | Ask Questions. Make Mistakes. L-1710 Luxembourg | email [email protected] | http://www.cpu.lu/~mlan | Learn Always. "
[[ This message was sent via the linuxppc-dev mailing list. Replies are ]] [[ not forced back to the list, so be sure to Cc linuxppc-dev if your ]] [[ reply is of general interest. Please check http://lists.linuxppc.org/ ]]
[[ and http://www.linuxppc.org/ for useful information before posting. ]]
Hi all,
On 2 Aug, this message from Jeffrey Karl Lassahn echoed through cyberspace:
Quoted 10 lines
One simple thing that bit me is that the machine can try to boot before the hard drive hs spun up. This gives the default catch you're seeing, and it depends on CPU speed.
I fixed it with an OpenFirmware change that I haven't bothered to fully understand, but which seems to work great. That is:
set
boot-command
to
begin ['] boot catch 1000 ms cr again
I already have this in my bootvars. I will check again, but at first glance, I don't think this will help.
Thanks anyway ;-)
Michel
-------------------------------------------------------------------------
Michel Lanners | " Read Philosophy. Study Art. 23, Rue Paul Henkes | Ask Questions. Make Mistakes. L-1710 Luxembourg | email [email protected] | http://www.cpu.lu/~mlan | Learn Always. "
[[ This message was sent via the linuxppc-dev mailing list. Replies are ]] [[ not forced back to the list, so be sure to Cc linuxppc-dev if your ]] [[ reply is of general interest. Please check http://lists.linuxppc.org/ ]]
[[ and http://www.linuxppc.org/ for useful information before posting. ]]