Skip to contentSkip to conversation

HP3000 928LX Support? (fwd)

parisc-linux Bill Katz(William) 2 participants 2 messages Sep 1, 1999

lore
Share & tools
lore
#0 lore raw

Grant Grundler wrote:

|Hugo van der Kooij wrote:
|> On Wed, 1 Sep 1999, Richard Muratti wrote:
|> 
|> > I have the opportunity to acquire a HP3000 928LX server
|> > and would like to know if it is supported.
|> 
|> HP3000 systems are not PA-RISC systems. They use the Motorola 68000 CPU
|> and you chould check the 68000 oport effort wether or not the unit may run
|> linux.
|
|[ I associate "HP3000" with the MPE products from CSY division]
|
|I can't speak for HP3000 products more than 5 years old.
|But recent HP3000 products are definitely PA-RISC.
|Firmware is different but many of the platform components
|are the same as K and T class machines.
|
|grant

HP3000s were NEVER 680x0 based. They were based on a proprietary 16 bit stack-based architecture until about 1986. After that they were PA-RISC systems. I'm pretty sure all that are identified with a 9xx number are PA-risc. Earlier machines had 2 digit model numbers, i.e.. HP3000/68.

I saw recently in the news where HP was suing a used computer dealer that was buying s800 HPUX machines, changing the bootROMS and making them into HP3000 s900 machines and selling them for more money.

I know very little about 9xx bootROMS, but there is a chance that Linux will boot on it, since it doesn't check anytihing in the bootROM to see if the BootROM forbids it from booting. MPE will not boot on s800s.

However the unit could be old enough that it has I/O cards based on the CIO or NIO (aka HP -pricision) bus. It is unlikely anyone will ever bother writing Linux drivers for those cards.

-Bill Katz

#1 lore raw

Bill Katz "(William)" wrote:
...

Quoted 3 lines

However the unit could be old enough that it has I/O cards based on the CIO or NIO (aka HP -pricision) bus. It is unlikely anyone will ever bother writing Linux drivers for those cards.

The whole point of linux is to use what's cheap and available. I would rather say:
It is unlikely anyone *in HP* will ever *get paid for* writing Linux drivers for CIO or NIO cards.

However, if documentation isn't publicly available, it would be pretty "challenging" for someone outside HP to do anything with HP-PB. And someone in HP might actually be masochistic enough to make parisc-linux boot/scan on NIO bus machines. ;^)

grant

Grant Grundler
Communications Infrastructure Computer Operations
+1.408.447.7253