THANK YOU for the Linuxdays (fwd)
Quoted 14 lines
Date: Wed, 8 Sep 1999 18:49:32 +0200
From: Matthew Wilcox <[email protected]>
To: "Ross J. Reedstrom" <[email protected]>
Subject: Re: THANK YOU for the Linuxdays (fwd)Quoted 7 lines · Ross J. Reedstrom
Ob.PA-RISC: Sorry my first post here is off topic. Perhaps I can salvage that. I've just aquired what I believe to be a HP9000 730/66 a.k.a. 'King Cobra' workstation. I haven't much time to play with it right now, but I _will_ be following this list, and trying to get your work up and running on it. Hopefully, this isn't too different from other 7XX machines. Anyone know of any 'gotcha's ? (Oh, and I have zero HP/UX experience (all Irix and Linux background).
Quoted 7 lines
Maybe this will be OK. It's PA-RISC 1.1a, a PA7000 processor like the 705/710/720/750 rather than the PA7100LC as the 712/715/etc machines have. We have docs on the 7100 and 7300 CPUs on the website, but no docs on the 7000. I suspect that getting documentation on this CPU will be low-priority; even lower priority than the HIL keyboard driver :-) So it may work, but don't be surprised if it doesn't.
Those original snakes have the ASP bus, which is quite similar to the LASI. You can look at the Mach code for differences. A couple of other differences that might bite you: the snakes don't have HW TLB miss handling support, the block TLBs have some funky restrictions, and they have the NCR53C700 SCSI controller which is a little quirky compared to the 53C710 in the later machines. But none of these are show-stoppers.