715/100 data page fault and msg output
Here's the output from the 715/100 followed by some comments:
...mem_init 0xC01667E0 0xC1000000mem_map c0116000&_stext c0010000&_data_start c0071000start_mem c0167000
Memory: 14948k available (388k kernel code, 984k data, 64k init) [c0000000,c1000000] here
here
here
here
here
here
here
here
here
here
VM testc007640c c0013288 c0076000
POSIX conformance testing by UNIFIXdo_basic setup 2do_basic setup 2
interrupted with code 15, regs c0076874
IAOQ: c0067c4c c0067c50
ISR: 00000000 IOR: c00167a8 IIR: 02a008b8
ior 00000004
sp c0076ac0c0078000 c0078000
bad pgd 00000000 at c0078000
address 00000004 (vma)
vma 00000000bad_area
bad address 00000004
PSW : 0004000b GR 1 : 00000000 GR 2 : 00014de8 GR 3 : c0079000 GR 4 : c0079000 GR 5 : c010dd48 GR 6 : c00fe000 GR 7 : c0105800 GR 8 : 00002000 GR 9 : 00000008 GR10 : c0015e84 GR11 : fc3ffe1f GR12 : 00000000 GR13 : 00000001 GR14 : 0000000a GR15 : f0000704 GR16 : f000b858 GR17 : 00000002 GR18 : 00000000 GR19 : c00eb92c GR20 : 0001aa03 GR21 : f0105800 GR22 : 00000000 GR23 : 00000060 GR24 : f0105800 GR25 : 00000001 GR26 : c00ddc8c GR27 : c0071000 GR28 : 00000000 GR29 : 00000000 GR30 : 00000000 GR31 : c0017840 SR0 : 00000000 SR1 : 00000000 SR2 : 00000000 SR3 : 00000000 SR4 : 00000000 SR5 : 00000000 SR6 : 00000000 SR7 : 00000000 IAOQ : c0067c4c c0067c50
SHR 1: 50000800 SHR 8: 00000008 SHR 9: c00d7000 SHR16: c0076874
SHR17: 00000002 SHR24: f0105800 SHR25: 00000001
Kernel panic: bad address
In swapper task - not syncing
================================================
I think this is a "Data Page Fault". The processor tried to access an address which wasn't valid in the Page directory. Couple of things in the trap handler would help here:
o More white space - makes what to cut/paste easier to determine
o clear text describing the fault
o In this case the offending instruction and a stack trace.
o printing the invalid address, IOAQ and general registers was good
o a message about please reset the machine to restart or something like that.
On a different note, the kernel prints lots of useful stuff along with plenty of garbage. As a general rule, I would like to propose folks use file name and line number instead of "here" and "Heya". Remember we will be debugging stuff via other folks console output quite a bit.
thanks,
grant
ps. Alex showed me the "la la la" work around in init_task.c.
Is anyone already working to make this a runtime check?
Grant Grundler
Communications Infrastructure Computer Operations
+1.408.447.7253
Quoted 15 lines
bad address 00000004
PSW :
0004000bGR 1 : 00000000 GR 2 :00014de8GR 3 :c0079000GR 4 :c0079000GR 5 :c010dd48GR 6 :c00fe000GR 7 :c0105800GR 8 : 00002000 GR 9 : 00000008 GR10 :c0015e84GR11 :fc3ffe1fGR12 : 00000000 GR13 : 00000001 GR14 :0000000aGR15 :f0000704GR16 :f000b858GR17 : 00000002 GR18 : 00000000 GR19 :c00eb92cGR20 :0001aa03GR21 :f0105800GR22 : 00000000 GR23 : 00000060 GR24 :f0105800GR25 : 00000001 GR26 :c00ddc8cGR27 :c0071000GR28 : 00000000 GR29 : 00000000 GR30 : 00000000 GR31 :c0017840SR0 : 00000000 SR1 : 00000000 SR2 : 00000000 SR3 : 00000000 SR4 : 00000000 SR5 : 00000000 SR6 : 00000000 SR7 : 00000000 IAOQ :c0067c4cc0067c50
SHR 1: 50000800 SHR 8: 00000008 SHR 9:c00d7000SHR16:c0076874
SHR17: 00000002 SHR24:f0105800SHR25: 00000001
Quoted 4 lines
Kernel panic: bad addressIn swapper task - not syncing
================================================
This is a NULL pointer, and most probably a bug in the CVS tree that is already fixed in my tree. I will send a diff between the trees to the list later.
Quoted 5 lines
Couple of things in the trap handler would help here:
o More white space - makes what to cut/paste easier to determine
o clear text describing the fault
o In this case the offending instruction and a stack trace.
o printing the invalid address, IOAQ and general registers was good
basically look at what the x86 port does and implement it.
Quoted 5 lines
On a different note, the kernel prints lots of useful stuff along with plenty of garbage. As a general rule, I would like to propose folks use file name and line number instead of "here" and "Heya". Remember we will be debugging stuff via other folks console output quite a bit.
Remember most of the messages will disappear soon (many of them as soon as Alex finishes moving the tree to 2.2.12). I do not intend to waste my time changing anything outside of arch/parisc and include/asm-parisc because that will mostly be replaced by the linus versions.
Quoted 2 lines
ps. Alex showed me the "la la la" work around in
init_task.c.
Is anyone already working to make this a runtime check?
you cannot. not without major pain at least
Philipp Rumpf
Quoted 3 lines · Philipp Rumpf
This is a NULL pointer, and most probably a bug in the CVS tree that is already fixed in my tree. I will send a diff between the trees to the list later.
Cool. Thanks!
Quoted 8 lines
Quoted 6 lines
Couple of things in the trap handler would help here:
o More white space - makes what to cut/paste easier to determine
o clear text describing the fault
o In this case the offending instruction and a stack trace.
o printing the invalid address, IOAQ and general registers was goodbasically look at what the x86 port does and implement it.
Ok - any volunteers?
...
Quoted 4 lines
Quoted 2 lines
ps. Alex showed me the "la la la" work around in
init_task.c.
Is anyone already working to make this a runtime check?you cannot. not without major pain at least
That didn't answer my question.
The right person might be able fix this without major pain. I don't think I'm that person but I could look at it anyway and then try to find the right person. Another OS doesn't have this problem and obviously has solved it.
thanks,
grant
Grant Grundler
Communications Infrastructure Computer Operations
+1.408.447.7253
Quoted 9 lines
Quoted 7 lines
Quoted 5 lines
Couple of things in the trap handler would help here:
o More white space - makes what to cut/paste easier to determine
o clear text describing the fault
o In this case the offending instruction and a stack trace.
o printing the invalid address, IOAQ and general registers was goodbasically look at what the x86 port does and implement it.
Ok - any volunteers?
I am a low-priority volunteer, i.e. if noone else does it I'll do it anyway one day.
Quoted 11 lines
Quoted 4 lines
Quoted 2 lines
ps. Alex showed me the "la la la" work around in
init_task.c.
Is anyone already working to make this a runtime check?you cannot. not without major pain at least
That didn't answer my question.
The right person might be able fix this without major pain. I don't think I'm that person but I could look at it anyway and then try to find the right person. Another OS doesn't have this problem and obviously has solved it.
- we could fix our binutils and use elf instead of som. we'll have to do so anyway at one point but it's a major piece of boring work
- we could runtime-relocate init_task_union. major pain because we would have to change assembly
- we could reduce the size of task_struct and stack to 4 KB
- we could change the way Linux allocates the kernel stack
- we could detect at build time that init_task_union isn't aligned and work around it with makefile / ld magic.
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
ps. Alex showed me the "la la la" work around in
init_task.c.
Is anyone already working to make this a runtime check?
Grant:
I'm working on getting the kernel to boot/load on a C200... would you mind explaining the "la la la" work around in init_task.c so I'll know when I get to that point?
Thanks,
-Ryan
[parisc-linux] C200 support
Quoted 1 line · Ryan Bradetich
I'm working on getting the kernel to boot/load on a C200...
Ryan,
C200+ has a PA-8200 processor (PA 2.0 Arch) and C200 had the previous PA 2.0 processor in it. Haven't you had problems since this port (to date) is focused on PA1.1 architecture?
I'm certain PA2.0 will be supported in the future but not today. I don't want to discourage you but also don't want you to burn out trying to make this work...
grant
Grant Grundler
Communications Infrastructure Computer Operations
+1.408.447.7253
Re: C200 support
Quoted 8 lines · Grant Grundler
Quoted 1 line · Ryan Bradetich
I'm working on getting the kernel to boot/load on a C200...
Ryan,
C200+ has a PA-8200 processor (PA 2.0 Arch) and C200 had the previous PA 2.0 processor in it. Haven't you had problems since this port (to date) is focused on PA1.1 architecture?
Yep, I have the C200+ with the PA-8200 processor, and yes ... I've been having lots of problems with the port, but I'm slowly working through them :) Unfortunately, my parisc assembly/linux internals is really, really weak, but this gives me a good chance to learn both.
Quoted 4 lines
I'm certain PA2.0 will be supported in the future but not today. I don't want to discourage you but also don't want you to burn out trying to make this work...
Nah, I probably won't get burned out, but will probably keep asking quite a few questions as I continue to learn.
Quoted 6 lines
grant
Grant Grundler
Communications Infrastructure Computer Operations
+1.408.447.7253
Quoted 4 lines
IAOQ:
c0067c4cc0067c50
ISR: 00000000 IOR:c00167a8IIR:02a008b8
ior 00000004
o In this case the offending instruction and a stack trace.
Interestingly, IIR (the interupting instruction register) contains
mfctl ior,arg2, which is not what we want... Likewise IOR (as
opposed to ior) also looks suspect. I would wager that someone is not saving the I* registers correctly...
lamont
Quoted 4 lines
Interestingly, IIR (the interupting instruction register) contains
mfctl ior,arg2, which is not what we want... Likewise IOR (as
opposed to ior) also looks suspect. I would wager that someone is not saving the I* registers correctly...
we don't save them at all, but directly read them. Of course, printing them doesn't make any sense (except for debugging the interruption code).
Philipp Rumpf
Quoted 2 lines
we don't save them at all, but directly read them. Of course, printing them doesn't make any sense (except for debugging the interruption code).
Reading them when PSW.Q=1 is undefined, and it sounds like that's where the problem is coming from.... IIR should have had a load or store in it for Grant's problem... But that has to get stored before going virtual to handle the trap...
lamont
Quoted 5 lines
Quoted 2 lines
we don't save them at all, but directly read them. Of course, printing them doesn't make any sense (except for debugging the interruption code).
Reading them when PSW.Q=1 is undefined, and it sounds like that's where the problem is coming from....
erm. yes, I know that. Yes, I said it doesn't make any sense.
Quoted 1 line
IIR should have had a load or store in it for Grant's problem...
Grant's problem is most likely solved. And no, there is no reason to save IIR right now (there might be one when we have to find out whether a read or write failed).
Philipp Rumpf
Philipp Rumpf wrote:
...
Quoted 3 lines
Quoted 1 line
IIR should have had a load or store in it for Grant's problem...
Grant's problem is most likely solved.
When will I see a "likely solution"?
I'm still clueless to what is causing the data page fault and can't make forward progress on Dino support.
(Hint: I have a card-mode Dino installed to exercise the basic code.)
thanks,
grant
Grant Grundler
Communications Infrastructure Computer Operations
+1.408.447.7253
[parisc-linux] 715/80 problems
In reply to Grant GrundlerHei!
With 715/80 I get following:
Boot
:disk(....)/stand/vmlinux
GRs
0x00000000
...
<bunch of HEX-values>
CRs
<bunch of HEX-values>
SRs
<bunch of HEX-values>
OTHER
<bunch of HEX-values>
and then nothing...
It should be plain 715 but I have addon X.25 card on this machine (EISA?)
- Goodi
"The linuX Files -- The Source is Out There." ø,¸¸,ø¤º°°º¤ø,¸¸,ø¤º°°º¤ø,¸¸,ø¤º°°º¤ø,¸¸,ø¤º°°º¤ø¤º°`°º¤ø,¸¸,ø¤º°
Re: [parisc-linux] 715/80 problems
Quoted 3 lines
With 715/80 I get following:
Boot
:disk(....)/stand/vmlinux
you might want to try to boot via tftp / bootp as this is what most of us do and it seems to work for us.
Philipp Rumpf
Re: [parisc-linux] 715/80 problems
Quoted 6 lines · Philipp Rumpf
Quoted 3 lines
With 715/80 I get following:
Boot
:disk(....)/stand/vmlinuxyou might want to try to boot via tftp / bootp as this is what most of us do and it seems to work for us.
What's the difference? I mean why should it be different?
I guess tftp/bootp uses the Image (make Image) and IPL can use vmlinux (make vmlinux) kernel.
Quoted 1 line
Philipp Rumpf
- Goodi
"The linuX Files -- The Source is Out There." ø,¸¸,ø¤º°°º¤ø,¸¸,ø¤º°°º¤ø,¸¸,ø¤º°°º¤ø,¸¸,ø¤º°°º¤ø¤º°`°º¤ø,¸¸,ø¤º°
Re: [parisc-linux] 715/80 problems
Quoted 3 lines
What's the difference? I mean why should it be different?
I guess tftp/bootp uses the Image (make Image) and IPL can use vmlinux (make vmlinux) kernel.
It can't (or at least I don't know it can). The kernel image has to be loaded by a boot loader, and there is reason to believe it has to be our boot loader.
Philipp Rumpf
Re: [parisc-linux] 715/80 problems
In reply to Philipp RumpfQuoted 7 lines · Philipp Rumpf
Quoted 3 lines · Hannu Martikka
With 715/80 I get following:
Boot
:disk(....)/stand/vmlinuxyou might want to try to boot via tftp / bootp as this is what most of us do and it seems to work for us.
Goodi,
Are you using HP-UX boot loader?
To boot from disk, one should do "make Image" and dd the Image to disk. This will trash the HP-UX file system so only do this on a spare disk! The loader used is then from the parisc-linux source tree.
grant
Re: [parisc-linux] 715/80 problems
Quoted 11 lines · Grant Grundler
Quoted 7 lines · Philipp Rumpf
Quoted 3 lines · Hannu Martikka
With 715/80 I get following:
Boot
:disk(....)/stand/vmlinuxyou might want to try to boot via tftp / bootp as this is what most of us do and it seems to work for us.
Goodi,
Are you using HP-UX boot loader?
I was... It used to work (at the time when kernel didn't... :)
Quoted 3 lines
To boot from disk, one should do "make Image" and dd the Image to disk. This will trash the HP-UX file system so only do this on a spare disk! The loader used is then from the parisc-linux source tree.
I setup the tftp/bootp server and now I can boot my 715/80 from lan. Last thing it says is "urgh" and then it stays in for(;;). I cannot say wether that is good or bad :)
Quoted 1 line
grant
- Goodi
"The linuX Files -- The Source is Out There." ø,¸¸,ø¤º°°º¤ø,¸¸,ø¤º°°º¤ø,¸¸,ø¤º°°º¤ø,¸¸,ø¤º°°º¤ø¤º°`°º¤ø,¸¸,ø¤º°
Re: [parisc-linux] 715/80 problems
In reply to Philipp RumpfQuoted 7 lines · Philipp Rumpf
Quoted 4 lines
With 715/80 I get following:
Boot
:disk(....)/stand/vmlinuxyou might want to try to boot via tftp / bootp as this is what most of us do and it seems to work for us.
There's definitely a problem with booting off of a disk, and I'm not sure what the problem really is. It'd be great if someone could look into this, I know we're not implementing the entire LIF header.
Has *anyone* been able to boot from disk?
- Alex
Signature · 3 lines
Alex deVries Vice President of Engineering The Puffin Group
Re: [parisc-linux] 715/80 problems
In reply to Hannu MartikkaQuoted 8 lines · Hannu Martikka
Hei!
With 715/80 I get following:
Boot
:disk(....)/stand/vmlinux
Hannu/Goodi,
You didn't get any messages about a bad address here?
Dumping the GRs/CRs/SRs suggests a SW fault which can't be handled...but the linux kernel needs to learn how to dump more useful information.
BTW, those "<bunch of HEX-values>" mean something to various people on the list. If you can collect (and post) all output via serial console starting with the "Boot" message, others on this list might be able to help.
Quoted 10 lines
GRs
0x00000000
...
<bunch of HEX-values>
CRs<bunch of HEX-values>
SRs
Quoted 7 lines
<bunch of HEX-values>
OTHER<bunch of HEX-values>
and then nothing...
It should be plain 715 but I have addon X.25 card on this machine (EISA?)
I think the EISA is ignored for now...
grant
Quoted 9 lines
- Goodi
"The linuX Files -- The Source is Out There." �,��,��������,��,��������,��,��������,��,�����������`����,��,����---------------------------------------------------------------------------
To unsubscribe: send e-mail to [email protected] with `unsubscribe' as the subject.
Grant Grundler
Communications Infrastructure Computer Operations +1.408.447.7253
Re: [parisc-linux] 715/80 problems
Quoted 10 lines · Grant Grundler
Quoted 6 lines · Hannu Martikka
Hei!
With 715/80 I get following:Boot
:disk(....)/stand/vmlinuxHannu/Goodi,
You didn't get any messages about a bad address here?
Nope. First thing that showed up was "GRs".
Quoted 8 lines
Dumping the GRs/CRs/SRs suggests a SW fault which can't be handled...but the linux kernel needs to learn how to dump more useful information.
BTW, those "<bunch of HEX-values>" mean something to various people on the list. If you can collect (and post) all output via serial console starting with the "Boot" message, others on this list might be able to help.
I was using the IPL/HPUX loader to start kernel. Are you still interested? It now works with tftp/bootp.
Quoted 3 lines
Grant Grundler
Communications Infrastructure Computer Operations +1.408.447.7253
- Goodi
"The linuX Files -- The Source is Out There." ø,¸¸,ø¤º°°º¤ø,¸¸,ø¤º°°º¤ø,¸¸,ø¤º°°º¤ø,¸¸,ø¤º°°º¤ø¤º°`°º¤ø,¸¸,ø¤º°