Booting from tape
Hi all,
thanks for all the tips. dd-ing with bs=2k made the difference. The kernel now also boots from a SCSI DDS tape drive (HP35480A). My first thought was to choose the disk sector size 512 but this was wrong.
Ulrich
Quoted 51 lines · --- Grant Grundler
Quoted 3 lines · Ulrich Strelow
I know that this is extremely low priority but...
I have tried to boot the linux kernel from a SCSI
DDS
Quoted 1 line
tape (copied via dd if=Image of=/dev/rmt/0m
bs=512).
Quoted 3 lines
The same kernel (cvs tree from today) boots
sucessfully via rbootd on my 715/33. Here is the
console log:...
Quoted 10 lines
Select from menu: b p2
Trying scsi.0.0
Boot path initialized.
Attempting to load IPL.Failed I/O operation with scsi.0.0
ENTRY_IOstatus = -1000000000 00000000 00000000 00000000 00000000
00000000
Quoted 2 lines
00000000 00000000
00000000 00000000 00000000 00000000 0000000000000000
Quoted 2 lines
00000000 00000000
00004F04 000000FF FF0009BF 00000000 800100DC00000000
Quoted 2 lines
0025F000 00000400
98080000 00000000 00008C60 00000000 000000FF00000000
Quoted 1 line
00000000 00000000
I believe this is a problem with either how the tape was created
or talking to the tape drive. Does anyone know where to find what
the -10 status means?Another difference when booting from tape (vs disk), is how the
tape is "made". One *must* specify 2k block size. It doesn't matter
for disk devices. Eg:dd if=Image of=/dev/rmt/0m bs=2k
I don't know if Image is intentionally padded to a 2k block size.
One might check that too.
Quoted 8 lines
grant
Grant Grundler
Communications Infrastructure Computer Operations
+1.408.447.7253
---------------------------------------------------------------------------
Quoted 5 lines
To unsubscribe: send e-mail to
[email protected] with
`unsubscribe' as the subject.
__________________________________________________
Do You Yahoo!?
Bid and sell for free at http://auctions.yahoo.com