Testers needed for hardware detection code...
Yesterday I committed some hardware detection code that actually worked on my A180. I spent today refining it to work on my 715, which works, but I need others to test it on different hardware.
Here's what I get on my 715:
Probing PDC firmware for devices, found:
This is an older box...
- Scorpio Sr. Core SCSI (10) at 0xf0825000, versions 0x19, 0x0, 0x71,0x0,
- Scorpio Sr. Core LAN (802.3) (10) at 0xf0826000, versions 0x19,0x0,
- Scorpio Sr. Core HIL (10) at 0xf0821000, versions 0x19, 0x0, 0x73,0x0,
- Scorpio Sr. Core RS-232 (10) at 0xf0823000, versions 0x19, 0x0,0x75,
- Scorpio Sr. Core RS-232 (10) at 0xf0822000, versions 0x19, 0x0,0x75,
- Scorpio Sr. Core Centronics (10) at 0xf0824000, versions 0x19, 0x0,0x74,
- Scorpio Sr. Audio (10) at 0xf1000000, versions 0x19, 0x0, 0x7b,0x0, 0x0
That's 7 devices total.
Linux version 2.2.12 (adevries@rum) (gcc version egcs-2.91.60 19981201 (egcs-1.5 Thu Sep 30 09:22:07 EDT 1999
etc
On my A180 (with an add in 10/100 ethernet card and a dual gigabit ethernet card), I get:
Probing PDC firmware for devices, found:
- Phantom PseudoBC GSC+ Port (7) at 0xffc00000, versions 0x504, 0x0,0x0,
- Phantom PseudoBC GSC+ Port (7) at 0xffc01000, versions 0x505, 0x0,0x0,
- HP HSC-PCI Cards (4) at 0xfff84000, versions 0x4, 0x0, 0x9d, 0x0,0x80
- HP HSC-PCI Cards (4) at 0xfff88000, versions 0x4, 0x0, 0x9d, 0x0,0x80
- Staccato L2 180 (A Class 180) (0) at 0xfffbe000, versions 0x516,0x0,
- Staccato L2 180 Memory (1) at 0xfffbf000, versions 0x8b, 0x0, 0x9,0x0,
- Staccato 180 Lasi (11) at 0xffd00000, versions 0x5f, 0x0, 0x81,0x0, 0x0
- Staccato 180 Core LAN RS-232 (10) at 0xffd05000, versions 0x5f,0x0,
- Staccato 180 Core SCSI (10) at 0xffd06000, versions 0x5f, 0x0,0x82, 0x0,
- Dino PCI Bridge (13) at 0xfff80000, versions 0x680, 0x3, 0xa, 0x0,0x0
That's 10 devices total.
Linux version 2.2.12 (adevries@rum) (gcc version egcs-2.91.60 19981201 (egcs-1.5 Thu Sep 30 09:22:07 EDT 1999
I'm very interested in seeing the results on pretty much any other hardware. Could people please test either building a kernel from source, or from the binary at:
ftp://puffin.external.hp.com/pub/parisc/binaries/kernels/Image-19990929
I'd appreciate it if you could just mail me ([email protected]) the results of an entire bootup. If you could put the machine name in the subject, it'd help.
Getting this to go was pretty hard, since the docs for MEM_MAP and SYSTEM_MAP were unavailable at the time of the writing of the code. The somewhat random alignment chewed up a lot of time.
In other good news, it sounds like Philipp is close to getting a serial console on Lasi going.
- Alex
Signature · 3 lines
Alex deVries Vice President of Engineering The Puffin Group
Quoted 4 lines · Alex deVries
Yesterday I committed some hardware detection code that actually worked on my A180. I spent today refining it to work on my 715, which works, but I need others to test it on different hardware.
Kudos!
...
Quoted 3 lines
I'd appreciate it if you could just mail me ([email protected]) the results of an entire bootup. If you could put the machine name in the subject, it'd help.
Alex meant "model" (eg 9000/715/E) output or "Model" info which is typically printed next to the serial number on the back of the box.
He really doesn't care if your hostname is "frodo". :^)
cheers,
grant
Grant Grundler
Communications Infrastructure Computer Operations
+1.408.447.7253