Skip to contentSkip to conversation

rbooting an 735?

parisc-linux Simen Timian Thoresen 6 participants 7 messages Oct 22, 1999 – Oct 25, 1999

lore
Share & tools
lore
#0 lore raw

Is anybody rbooting an 735?
I've replaced my exceedingly noisy Micropolis disk, and replaced it with a 2.1G seagate thing which, altho so far working nicely, refuses to boot. So, to try new 'lin-ux' kernels I have to use rboot.

As far as I can see, the rbootd server is configured correctly, and is communicating with the 735. Unfortunately, the 735 seems not to request an image name, and the server responds with 'denied' in the syslog.

So - Is there anybody out there with a 735 that /does/ request an image?

-Simen
--
Simen Thoresen, Beowulf-cleaner and random artist.

Er det ikke rart?
The gnu RART-project on valinor.dolphinics.no/~simentt/rart

#1 lore raw
Quoted 4 lines · Simen Timian Thoresen

Is anybody rbooting an 735?
I've replaced my exceedingly noisy Micropolis disk, and replaced it with a 2.1G seagate thing which, altho so far working nicely, refuses to boot.

Many of the older HP-UX systems can NOT boot from a "whole disk" which is greater than 2GB. The IODC on older boxes has problems when the byte offset into the disk goes "negative" (exceeds what can be represented by "sign int"). And the "whole disk" layout puts some of the LIF boot info beyond the reach of IODC. Setting up the boot disk with LVM changes the disk layout such that it works. I know LVM is required to boot from 4GB (or greater sized) disks too. You might try LVM.

This is another reason parisc-linux boot loader needs to support LVM.

I don't know what the rbootd problem is...

grant

Grant Grundler
Communications Infrastructure Computer Operations
+1.408.447.7253

#2 lore raw
Quoted 1 line · Grant Grundler

I don't know what the rbootd problem is...

Actually, I seem to recall patching up the rbootd rpm to support this, but I don't remember the fix. If you look at the rbootd source rpm that's up on ftp://puffin.external.hp.com you should find the patch.

- alex

#3 lore raw
Quoted 8 lines · Grant Grundler
Quoted 1 line

I don't know what the rbootd problem is...

Actually, I seem to recall patching up the rbootd rpm to support this, but I don't remember the fix. If you look at the rbootd source rpm that's up on ftp://puffin.external.hp.com you should find the patch.

- alex

ftp://puffin.external.hp.com/pub/parisc/binaries/SRPMS/rbootd-2.0-2.src.rpm

GREAT!
That seems as if it should work!
I'll try it when I get home tonight.

Shouldn't this change be back-propagated to the original rbootd maintaners?

-Simen
--
Simen Thoresen, Beowulf-cleaner and random artist.

Er det ikke rart?
The gnu RART-project on valinor.dolphinics.no/~simentt/rart

#4 lore raw
Quoted 8 lines · Simen Timian Thoresen
Quoted 3 lines

Actually, I seem to recall patching up the rbootd rpm to support this, but I don't remember the fix. If you look at the rbootd source rpm that's up on ftp://puffin.external.hp.com you should find the patch.

ftp://puffin.external.hp.com/pub/parisc/binaries/SRPMS/rbootd-2.0-2.src.rpm

Shouldn't this change be back-propagated to the original rbootd maintaners?

Sure, it should. However, I wonder if the code is still maintained inside of the University of Utah...

Regards,

Joey

Signature · 1 line
There are lies, statistics and benchmarks.
#5 lore raw
In reply to Simen Timian Thoresen

= Is anybody rbooting an 735?
= [...]
= So - Is there anybody out there with a 735 that /does/ request an = image?

Mine didn't work either. It's *possible* there's newer firmware which would help.

-Paul Bame

#6 lore raw
Quoted 1 line

= Is anybody rbooting an 735?

I am not rbooting but recent kernels that I have built up to yesterday hang with no console output after the ipl boot message I couldn't define CONFIG_IODC_CONSOLE with yesterday's sources because the procedure iodc_con_init is not defined anywhere. There also needs to be definitions for inb, outb, etc.

Dave

Signature · 2 lines
J. David Anglin                                  [email protected]
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)