Parallel port hardware (fwd)
----- Forwarded message from Sandy Harris -----
Quoted 1 line
Early 715s (/33, /50, /75) use a WDC 16C522 (or is it 552?) for the 2
The one in my 715/33 is labelled 16C552-JT.
Quoted 8 lines · Bill Katz (William)
Sandy Harris wrote:
|Can anyone point me to info on the electrical properties of the parallel ports |on 712 or 715 machines? | |I'm thinking that 8 715s might make an interesting parallel engine, but the cable device |only works if the parallel port's control lines are implemented as open collector TTL. |Where can I discover whether they are?
Quoted 7 lines
Early 715s ...
Later 715s (/64, /80, /100) and all 712s use Lasi. From the chip ERS (not published, it's mostly electrical stuff) Data strobe, autofeed, parinit, and select
The ones that connect to pins 1, 14, 16, and 17 are open collector.
Bingo! Those are exactly the four lines used for the Wapers parallel stuff.