Skip to contentSkip to conversation

ntp recipe not able to install few packages in the rootfs

DISCUSSION Pandey, Kamal 3 participants 3 messages May 14, 2019 – May 20, 2019

lore
Share & tools
lore
#0 lore raw

Hi
I was trying to add ntp package to my image, I used the meta-networking layer for the recipe and added the ntp package to my custom image.bb recipe. After compiling I can see multiple packages in package-split directory of the working directory of ntp package, but these binaries are missing in the ROOTFS directory. Below is my ntp recipe:

SUMMARY = "Network Time Protocol daemon and utilities" DESCRIPTION = "The Network Time Protocol (NTP) is used to \
synchronize the time of a computer client or server to \
another server or reference time source, such as a radio \
or satellite receiver or modem."
HOMEPAGE = "http://support.ntp.org"
SECTION = "net"
LICENSE = "NTP"
LIC_FILES_CHKSUM = "file://COPYRIGHT;md5=e877a1d567a6a58996d2b66e3e387003"

DEPENDS = "libevent"

SRC_URI = "http://www.eecis.udel.edu/~ntp/ntp_spool/ntp4/ntp-4.2/ntp-${PV}.tar.gz \
           file://ntp-4.2.4_p6-nano.patch \
           file://reproducibility-fixed-path-to-posix-shell.patch \
           file://reproducibility-respect-source-date-epoch.patch \
           file://ntpd \
           file://ntp.conf \
           file://ntpdate \
           file://ntpdate.default \
           file://ntpdate.service \
           file://ntpd.service \
           file://sntp.service \
           file://sntp \
           file://ntpd.list \

"

SRC_URI[md5sum] = "1522d66574bae14abb2622746dad2bdc"
SRC_URI[sha256sum] = "709b222b5013d77d26bfff532b5ea470a8039497ef29d09363931c036cb30454"

inherit autotools update-rc.d useradd systemd pkgconfig

# The ac_cv_header_readline_history is to stop ntpdc depending on either

# readline or curses
EXTRA_OECONF += "--with-net-snmp-config=no \
                 --without-ntpsnmpd \
                 ac_cv_header_readline_history_h=no \
                 --with-yielding_select=yes \
                 --with-locfile=redhat \
                 --without-rpath \
                 "
CFLAGS_append = " -DPTYS_ARE_GETPT -DPTYS_ARE_SEARCHED"

USERADD_PACKAGES = "${PN}"
NTP_USER_HOME ?= "/var/lib/ntp"

USERADD_PARAM_${PN} = "--system --home-dir ${NTP_USER_HOME} \
                       --no-create-home \
                       --shell /bin/false --user-group ntp"

# NB: debug is default-enabled by NTP; keep it default-enabled here. PACKAGECONFIG ??= "cap debug refclocks openssl \

    ${@bb.utils.filter('DISTRO_FEATURES', 'ipv6', d)} \
"
PACKAGECONFIG[openssl] = "--with-openssl-libdir=${STAGING_LIBDIR} \
                          --with-openssl-incdir=${STAGING_INCDIR} \
                          --with-crypto, \
                          --without-openssl --without-crypto, \
                          openssl"

PACKAGECONFIG[cap] = "--enable-linuxcaps,--disable-linuxcaps,libcap" PACKAGECONFIG[readline] = "--with-lineeditlibs,--without-lineeditlibs,readline" PACKAGECONFIG[refclocks] = "--enable-all-clocks,--disable-all-clocks,pps-tools" PACKAGECONFIG[debug] = "--enable-debugging,--disable-debugging" PACKAGECONFIG[mdns] = "ac_cv_header_dns_sd_h=yes,ac_cv_header_dns_sd_h=no,mdns" PACKAGECONFIG[ipv6] = "--enable-ipv6,--disable-ipv6,"

do_install_append() {
    install -d ${D}${sysconfdir}/init.d
    install -m 644 ${WORKDIR}/ntp.conf ${D}${sysconfdir}
    install -m 755 ${WORKDIR}/ntpd ${D}${sysconfdir}/init.d
    install -d ${D}${bindir}
    install -m 755 ${WORKDIR}/ntpdate ${D}${bindir}/ntpdate-sync

    install -m 755 -d ${D}${NTP_USER_HOME}
    chown ntp:ntp ${D}${NTP_USER_HOME}

    # Fix hardcoded paths in scripts
    sed -i 's!/usr/sbin/!${sbindir}/!g' ${D}${sysconfdir}/init.d/ntpd ${D}${bindir}/ntpdate-sync
    sed -i 's!/usr/bin/!${bindir}/!g' ${D}${sysconfdir}/init.d/ntpd ${D}${bindir}/ntpdate-sync
    sed -i 's!/etc/!${sysconfdir}/!g' ${D}${sysconfdir}/init.d/ntpd ${D}${bindir}/ntpdate-sync
    sed -i 's!/var/!${localstatedir}/!g' ${D}${sysconfdir}/init.d/ntpd ${D}${bindir}/ntpdate-sync
    sed -i 's!^PATH=.*!PATH=${base_sbindir}:${base_bindir}:${sbindir}:${bindir}!' ${D}${bindir}/ntpdate-sync
    sed -i '1s,#!.*perl -w,#! ${bindir}/env perl,' ${D}${sbindir}/ntptrace
    sed -i '/use/i use warnings;' ${D}${sbindir}/ntptrace
    sed -i '1s,#!.*perl,#! ${bindir}/env perl,' ${D}${sbindir}/ntp-wait
    sed -i '/use/i use warnings;' ${D}${sbindir}/ntp-wait
    sed -i '1s,#!.*perl -w,#! ${bindir}/env perl,' ${D}${sbindir}/calc_tickadj
    sed -i '/use/i use warnings;' ${D}${sbindir}/calc_tickadj

    install -d ${D}/${sysconfdir}/default
    install -m 644 ${WORKDIR}/ntpdate.default ${D}${sysconfdir}/default/ntpdate
    install -m 0644 ${WORKDIR}/sntp ${D}${sysconfdir}/default/

    install -d ${D}/${sysconfdir}/network/if-up.d
    ln -s ${bindir}/ntpdate-sync ${D}/${sysconfdir}/network/if-up.d

    install -d ${D}${systemd_unitdir}/system
    install -m 0644 ${WORKDIR}/ntpdate.service ${D}${systemd_unitdir}/system/
    install -m 0644 ${WORKDIR}/ntpd.service ${D}${systemd_unitdir}/system/
    install -m 0644 ${WORKDIR}/sntp.service ${D}${systemd_unitdir}/system/

    install -d ${D}${systemd_unitdir}/ntp-units.d
    install -m 0644 ${WORKDIR}/ntpd.list ${D}${systemd_unitdir}/ntp-units.d/60-ntpd.list

    # Remove an empty libexecdir.
    rmdir --ignore-fail-on-non-empty ${D}${libexecdir}
}

PACKAGES += "ntpdate sntp ntpq ${PN}-tickadj ${PN}-utils" # NOTE: you don't need ntpdate, use "ntpd -q -g -x"

# ntp originally includes tickadj. It's split off for inclusion in small firmware images on platforms
# with wonky clocks (e.g. OpenSlug)
RDEPENDS_${PN} = "${PN}-tickadj"
# ntpd require libgcc for execution
RDEPENDS_${PN} += "libgcc"
# Handle move from bin to utils package
RPROVIDES_${PN}-utils = "${PN}-bin"
RREPLACES_${PN}-utils = "${PN}-bin"
RCONFLICTS_${PN}-utils = "${PN}-bin"
# ntpq was split out of ntp-utils
RDEPENDS_${PN}-utils = "ntpq"

SYSTEMD_PACKAGES = "${PN} ntpdate sntp"
SYSTEMD_SERVICE_${PN} = "ntpd.service"
SYSTEMD_SERVICE_ntpdate = "ntpdate.service"
SYSTEMD_SERVICE_sntp = "sntp.service"
SYSTEMD_AUTO_ENABLE_sntp = "disable"

RPROVIDES_${PN} += "${PN}-systemd"
RREPLACES_${PN} += "${PN}-systemd"
RCONFLICTS_${PN} += "${PN}-systemd"

RPROVIDES_ntpdate += "ntpdate-systemd"
RREPLACES_ntpdate += "ntpdate-systemd"
RCONFLICTS_ntpdate += "ntpdate-systemd"

RSUGGESTS_${PN} = "iana-etc"

FILES_${PN} = "${sbindir}/ntpd.ntp ${sysconfdir}/ntp.conf ${sysconfdir}/init.d/ntpd ${libdir} \
    ${NTP_USER_HOME} \
    ${systemd_unitdir}/ntp-units.d/60-ntpd.list ${libexecdir}\

"
FILES_${PN}-tickadj = "${sbindir}/tickadj" FILES_${PN}-utils = "${sbindir} ${datadir}/ntp/lib" RDEPENDS_${PN}-utils += "perl"

FILES_ntpdate = "${sbindir}/ntpdate \
    ${sysconfdir}/network/if-up.d/ntpdate-sync \
    ${bindir}/ntpdate-sync \
    ${sysconfdir}/default/ntpdate \
    ${systemd_unitdir}/system/ntpdate.service \
"
FILES_sntp = "${sbindir}/sntp \
              ${sysconfdir}/default/sntp \
              ${systemd_unitdir}/system/sntp.service \
             "

FILES_ntpq = "${sbindir}/ntpq"

CONFFILES_${PN} = "${sysconfdir}/ntp.conf" CONFFILES_ntpdate = "${sysconfdir}/default/ntpdate"

INITSCRIPT_NAME = "ntpd"
# No dependencies, so just go in at the standard level (20) INITSCRIPT_PARAMS = "defaults"

pkg_postinst_ntpdate() {
if ! grep -q -s ntpdate $D/var/spool/cron/root; then
echo "adding crontab"
test -d $D/var/spool/cron || mkdir -p $D/var/spool/cron
echo "30 * * * * ${bindir}/ntpdate-sync silent" >> $D/var/spool/cron/root
fi
}

inherit update-alternatives

ALTERNATIVE_PRIORITY = "100"

ALTERNATIVE_${PN} = "ntpd"
ALTERNATIVE_LINK_NAME[ntpd] = "${sbindir}/ntpd"

Now the ntpq package is missing from the rootfile system while its there in package-split and image directory of the ntp app.

Can anyone tell me what could be the problem.
Thanks and regards
Kamal Pandey

#1 lore raw

How does your image recipe look like? Also, log.do_rootfs can provide a hint about what got installed into the image (you will find it in the image build directory).

Alex

Quoted 197 lines · Kamal

Hi
I was trying to add ntp package to my image, I used the meta-networking layer for the recipe and added the ntp package to my custom image.bb recipe. After compiling I can see multiple packages in package-split directory of the working directory of ntp package, but these binaries are missing in the ROOTFS directory. Below is my ntp recipe:

SUMMARY = "Network Time Protocol daemon and utilities" DESCRIPTION = "The Network Time Protocol (NTP) is used to \
synchronize the time of a computer client or server to \
another server or reference time source, such as a radio \
or satellite receiver or modem."
HOMEPAGE = "http://support.ntp.org"
SECTION = "net"
LICENSE = "NTP"
LIC_FILES_CHKSUM = "file://COPYRIGHT;md5=e877a1d567a6a58996d2b66e3e387003"

DEPENDS = "libevent"

SRC_URI = "http://www.eecis.udel.edu/~ntp/ntp_spool/ntp4/ntp-4.2/ntp-${PV}.tar.gz \
           file://ntp-4.2.4_p6-nano.patch \
           file://reproducibility-fixed-path-to-posix-shell.patch \
           file://reproducibility-respect-source-date-epoch.patch \
           file://ntpd \
           file://ntp.conf \
           file://ntpdate \
           file://ntpdate.default \
           file://ntpdate.service \
           file://ntpd.service \
           file://sntp.service \
           file://sntp \
           file://ntpd.list \

"

SRC_URI[md5sum] = "1522d66574bae14abb2622746dad2bdc"
SRC_URI[sha256sum] = "709b222b5013d77d26bfff532b5ea470a8039497ef29d09363931c036cb30454"

inherit autotools update-rc.d useradd systemd pkgconfig

# The ac_cv_header_readline_history is to stop ntpdc depending on either

# readline or curses
EXTRA_OECONF += "--with-net-snmp-config=no \
                 --without-ntpsnmpd \
                 ac_cv_header_readline_history_h=no \
                 --with-yielding_select=yes \
                 --with-locfile=redhat \
                 --without-rpath \
                 "
CFLAGS_append = " -DPTYS_ARE_GETPT -DPTYS_ARE_SEARCHED"

USERADD_PACKAGES = "${PN}"
NTP_USER_HOME ?= "/var/lib/ntp"

USERADD_PARAM_${PN} = "--system --home-dir ${NTP_USER_HOME} \
                       --no-create-home \
                       --shell /bin/false --user-group ntp"

# NB: debug is default-enabled by NTP; keep it default-enabled here. PACKAGECONFIG ??= "cap debug refclocks openssl \

    ${@bb.utils.filter('DISTRO_FEATURES', 'ipv6', d)} \
"
PACKAGECONFIG[openssl] = "--with-openssl-libdir=${STAGING_LIBDIR} \
                          --with-openssl-incdir=${STAGING_INCDIR} \
                          --with-crypto, \
                          --without-openssl --without-crypto, \
                          openssl"

PACKAGECONFIG[cap] = "--enable-linuxcaps,--disable-linuxcaps,libcap" PACKAGECONFIG[readline] = "--with-lineeditlibs,--without-lineeditlibs,readline" PACKAGECONFIG[refclocks] = "--enable-all-clocks,--disable-all-clocks,pps-tools" PACKAGECONFIG[debug] = "--enable-debugging,--disable-debugging" PACKAGECONFIG[mdns] = "ac_cv_header_dns_sd_h=yes,ac_cv_header_dns_sd_h=no,mdns" PACKAGECONFIG[ipv6] = "--enable-ipv6,--disable-ipv6,"

do_install_append() {
    install -d ${D}${sysconfdir}/init.d
    install -m 644 ${WORKDIR}/ntp.conf ${D}${sysconfdir}
    install -m 755 ${WORKDIR}/ntpd ${D}${sysconfdir}/init.d
    install -d ${D}${bindir}
    install -m 755 ${WORKDIR}/ntpdate ${D}${bindir}/ntpdate-sync

    install -m 755 -d ${D}${NTP_USER_HOME}
    chown ntp:ntp ${D}${NTP_USER_HOME}

    # Fix hardcoded paths in scripts
    sed -i 's!/usr/sbin/!${sbindir}/!g' ${D}${sysconfdir}/init.d/ntpd ${D}${bindir}/ntpdate-sync
    sed -i 's!/usr/bin/!${bindir}/!g' ${D}${sysconfdir}/init.d/ntpd ${D}${bindir}/ntpdate-sync
    sed -i 's!/etc/!${sysconfdir}/!g' ${D}${sysconfdir}/init.d/ntpd ${D}${bindir}/ntpdate-sync
    sed -i 's!/var/!${localstatedir}/!g' ${D}${sysconfdir}/init.d/ntpd ${D}${bindir}/ntpdate-sync
    sed -i 's!^PATH=.*!PATH=${base_sbindir}:${base_bindir}:${sbindir}:${bindir}!' ${D}${bindir}/ntpdate-sync
    sed -i '1s,#!.*perl -w,#! ${bindir}/env perl,' ${D}${sbindir}/ntptrace
    sed -i '/use/i use warnings;' ${D}${sbindir}/ntptrace
    sed -i '1s,#!.*perl,#! ${bindir}/env perl,' ${D}${sbindir}/ntp-wait
    sed -i '/use/i use warnings;' ${D}${sbindir}/ntp-wait
    sed -i '1s,#!.*perl -w,#! ${bindir}/env perl,' ${D}${sbindir}/calc_tickadj
    sed -i '/use/i use warnings;' ${D}${sbindir}/calc_tickadj

    install -d ${D}/${sysconfdir}/default
    install -m 644 ${WORKDIR}/ntpdate.default ${D}${sysconfdir}/default/ntpdate
    install -m 0644 ${WORKDIR}/sntp ${D}${sysconfdir}/default/

    install -d ${D}/${sysconfdir}/network/if-up.d
    ln -s ${bindir}/ntpdate-sync ${D}/${sysconfdir}/network/if-up.d

    install -d ${D}${systemd_unitdir}/system
    install -m 0644 ${WORKDIR}/ntpdate.service ${D}${systemd_unitdir}/system/
    install -m 0644 ${WORKDIR}/ntpd.service ${D}${systemd_unitdir}/system/
    install -m 0644 ${WORKDIR}/sntp.service ${D}${systemd_unitdir}/system/

    install -d ${D}${systemd_unitdir}/ntp-units.d
    install -m 0644 ${WORKDIR}/ntpd.list ${D}${systemd_unitdir}/ntp-units.d/60-ntpd.list

    # Remove an empty libexecdir.
    rmdir --ignore-fail-on-non-empty ${D}${libexecdir}
}

PACKAGES += "ntpdate sntp ntpq ${PN}-tickadj ${PN}-utils" # NOTE: you don't need ntpdate, use "ntpd -q -g -x"

# ntp originally includes tickadj. It's split off for inclusion in small firmware images on platforms
# with wonky clocks (e.g. OpenSlug)
RDEPENDS_${PN} = "${PN}-tickadj"
# ntpd require libgcc for execution
RDEPENDS_${PN} += "libgcc"
# Handle move from bin to utils package
RPROVIDES_${PN}-utils = "${PN}-bin"
RREPLACES_${PN}-utils = "${PN}-bin"
RCONFLICTS_${PN}-utils = "${PN}-bin"
# ntpq was split out of ntp-utils
RDEPENDS_${PN}-utils = "ntpq"

SYSTEMD_PACKAGES = "${PN} ntpdate sntp"
SYSTEMD_SERVICE_${PN} = "ntpd.service"
SYSTEMD_SERVICE_ntpdate = "ntpdate.service"
SYSTEMD_SERVICE_sntp = "sntp.service"
SYSTEMD_AUTO_ENABLE_sntp = "disable"

RPROVIDES_${PN} += "${PN}-systemd"
RREPLACES_${PN} += "${PN}-systemd"
RCONFLICTS_${PN} += "${PN}-systemd"

RPROVIDES_ntpdate += "ntpdate-systemd"
RREPLACES_ntpdate += "ntpdate-systemd"
RCONFLICTS_ntpdate += "ntpdate-systemd"

RSUGGESTS_${PN} = "iana-etc"

FILES_${PN} = "${sbindir}/ntpd.ntp ${sysconfdir}/ntp.conf ${sysconfdir}/init.d/ntpd ${libdir} \
    ${NTP_USER_HOME} \
    ${systemd_unitdir}/ntp-units.d/60-ntpd.list ${libexecdir}\

"
FILES_${PN}-tickadj = "${sbindir}/tickadj" FILES_${PN}-utils = "${sbindir} ${datadir}/ntp/lib" RDEPENDS_${PN}-utils += "perl"

FILES_ntpdate = "${sbindir}/ntpdate \
    ${sysconfdir}/network/if-up.d/ntpdate-sync \
    ${bindir}/ntpdate-sync \
    ${sysconfdir}/default/ntpdate \
    ${systemd_unitdir}/system/ntpdate.service \
"
FILES_sntp = "${sbindir}/sntp \
              ${sysconfdir}/default/sntp \
              ${systemd_unitdir}/system/sntp.service \
             "

FILES_ntpq = "${sbindir}/ntpq"

CONFFILES_${PN} = "${sysconfdir}/ntp.conf" CONFFILES_ntpdate = "${sysconfdir}/default/ntpdate"

INITSCRIPT_NAME = "ntpd"
# No dependencies, so just go in at the standard level (20) INITSCRIPT_PARAMS = "defaults"

pkg_postinst_ntpdate() {
if ! grep -q -s ntpdate $D/var/spool/cron/root; then
echo "adding crontab"
test -d $D/var/spool/cron || mkdir -p $D/var/spool/cron
echo "30 * * * * ${bindir}/ntpdate-sync silent" >> $D/var/spool/cron/root
fi
}

inherit update-alternatives

ALTERNATIVE_PRIORITY = "100"

ALTERNATIVE_${PN} = "ntpd"
ALTERNATIVE_LINK_NAME[ntpd] = "${sbindir}/ntpd"

Now the ntpq package is missing from the rootfile system while its there in package-split and image directory of the ntp app.

Can anyone tell me what could be the problem.
Thanks and regards
Kamal Pandey

--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

#2 lore raw
In reply to Pandey, Kamal
Quoted 3 lines · Kamal

Hi
I was trying to add ntp package to my image, I used the meta-networking layer for the recipe and added the ntp package to my custom image.bb recipe. After compiling I can see multiple packages in package-split directory of the working directory of ntp package, but these binaries are missing in the ROOTFS directory.

You can see below that ntpq is packaged into package of its own. So you need to add that to your IMAGE_INSTALL

something like

IMAGE_INSTALL_append = " ntpq"

in your image recipe might help

Quoted 188 lines

Below is my ntp recipe:

SUMMARY = "Network Time Protocol daemon and utilities" DESCRIPTION = "The Network Time Protocol (NTP) is used to \
synchronize the time of a computer client or server to \
another server or reference time source, such as a radio \
or satellite receiver or modem."
HOMEPAGE = "http://support.ntp.org"
SECTION = "net"
LICENSE = "NTP"
LIC_FILES_CHKSUM = "file://COPYRIGHT;md5=e877a1d567a6a58996d2b66e3e387003"

DEPENDS = "libevent"

SRC_URI = "http://www.eecis.udel.edu/~ntp/ntp_spool/ntp4/ntp-4.2/ntp-${PV}.tar.gz \
            file://ntp-4.2.4_p6-nano.patch \
            file://reproducibility-fixed-path-to-posix-shell.patch \
            file://reproducibility-respect-source-date-epoch.patch \
            file://ntpd \
            file://ntp.conf \
            file://ntpdate \
            file://ntpdate.default \
            file://ntpdate.service \
            file://ntpd.service \
            file://sntp.service \
            file://sntp \
            file://ntpd.list \

"

SRC_URI[md5sum] = "1522d66574bae14abb2622746dad2bdc"
SRC_URI[sha256sum] = "709b222b5013d77d26bfff532b5ea470a8039497ef29d09363931c036cb30454"

inherit autotools update-rc.d useradd systemd pkgconfig

# The ac_cv_header_readline_history is to stop ntpdc depending on either

# readline or curses
EXTRA_OECONF += "--with-net-snmp-config=no \
                  --without-ntpsnmpd \
                  ac_cv_header_readline_history_h=no \
                  --with-yielding_select=yes \
                  --with-locfile=redhat \
                  --without-rpath \
                  "
CFLAGS_append = " -DPTYS_ARE_GETPT -DPTYS_ARE_SEARCHED"

USERADD_PACKAGES = "${PN}"
NTP_USER_HOME ?= "/var/lib/ntp"

USERADD_PARAM_${PN} = "--system --home-dir ${NTP_USER_HOME} \
                        --no-create-home \
                        --shell /bin/false --user-group ntp"

# NB: debug is default-enabled by NTP; keep it default-enabled here. PACKAGECONFIG ??= "cap debug refclocks openssl \

     ${@bb.utils.filter('DISTRO_FEATURES', 'ipv6', d)} \
"
PACKAGECONFIG[openssl] = "--with-openssl-libdir=${STAGING_LIBDIR} \
                           --with-openssl-incdir=${STAGING_INCDIR} \
                           --with-crypto, \
                           --without-openssl --without-crypto, \
                           openssl"

PACKAGECONFIG[cap] = "--enable-linuxcaps,--disable-linuxcaps,libcap" PACKAGECONFIG[readline] = "--with-lineeditlibs,--without-lineeditlibs,readline" PACKAGECONFIG[refclocks] = "--enable-all-clocks,--disable-all-clocks,pps-tools" PACKAGECONFIG[debug] = "--enable-debugging,--disable-debugging" PACKAGECONFIG[mdns] = "ac_cv_header_dns_sd_h=yes,ac_cv_header_dns_sd_h=no,mdns" PACKAGECONFIG[ipv6] = "--enable-ipv6,--disable-ipv6,"

do_install_append() {
     install -d ${D}${sysconfdir}/init.d
     install -m 644 ${WORKDIR}/ntp.conf ${D}${sysconfdir}
     install -m 755 ${WORKDIR}/ntpd ${D}${sysconfdir}/init.d
     install -d ${D}${bindir}
     install -m 755 ${WORKDIR}/ntpdate ${D}${bindir}/ntpdate-sync

     install -m 755 -d ${D}${NTP_USER_HOME}
     chown ntp:ntp ${D}${NTP_USER_HOME}

     # Fix hardcoded paths in scripts
     sed -i 's!/usr/sbin/!${sbindir}/!g' ${D}${sysconfdir}/init.d/ntpd ${D}${bindir}/ntpdate-sync
     sed -i 's!/usr/bin/!${bindir}/!g' ${D}${sysconfdir}/init.d/ntpd ${D}${bindir}/ntpdate-sync
     sed -i 's!/etc/!${sysconfdir}/!g' ${D}${sysconfdir}/init.d/ntpd ${D}${bindir}/ntpdate-sync
     sed -i 's!/var/!${localstatedir}/!g' ${D}${sysconfdir}/init.d/ntpd ${D}${bindir}/ntpdate-sync
     sed -i 's!^PATH=.*!PATH=${base_sbindir}:${base_bindir}:${sbindir}:${bindir}!' ${D}${bindir}/ntpdate-sync
     sed -i '1s,#!.*perl -w,#! ${bindir}/env perl,' ${D}${sbindir}/ntptrace
     sed -i '/use/i use warnings;' ${D}${sbindir}/ntptrace
     sed -i '1s,#!.*perl,#! ${bindir}/env perl,' ${D}${sbindir}/ntp-wait
     sed -i '/use/i use warnings;' ${D}${sbindir}/ntp-wait
     sed -i '1s,#!.*perl -w,#! ${bindir}/env perl,' ${D}${sbindir}/calc_tickadj
     sed -i '/use/i use warnings;' ${D}${sbindir}/calc_tickadj

     install -d ${D}/${sysconfdir}/default
     install -m 644 ${WORKDIR}/ntpdate.default ${D}${sysconfdir}/default/ntpdate
     install -m 0644 ${WORKDIR}/sntp ${D}${sysconfdir}/default/

     install -d ${D}/${sysconfdir}/network/if-up.d
     ln -s ${bindir}/ntpdate-sync ${D}/${sysconfdir}/network/if-up.d

     install -d ${D}${systemd_unitdir}/system
     install -m 0644 ${WORKDIR}/ntpdate.service ${D}${systemd_unitdir}/system/
     install -m 0644 ${WORKDIR}/ntpd.service ${D}${systemd_unitdir}/system/
     install -m 0644 ${WORKDIR}/sntp.service ${D}${systemd_unitdir}/system/

     install -d ${D}${systemd_unitdir}/ntp-units.d
     install -m 0644 ${WORKDIR}/ntpd.list ${D}${systemd_unitdir}/ntp-units.d/60-ntpd.list

     # Remove an empty libexecdir.
     rmdir --ignore-fail-on-non-empty ${D}${libexecdir}
}

PACKAGES += "ntpdate sntp ntpq ${PN}-tickadj ${PN}-utils" # NOTE: you don't need ntpdate, use "ntpd -q -g -x"

# ntp originally includes tickadj. It's split off for inclusion in small firmware images on platforms
# with wonky clocks (e.g. OpenSlug)
RDEPENDS_${PN} = "${PN}-tickadj"
# ntpd require libgcc for execution
RDEPENDS_${PN} += "libgcc"
# Handle move from bin to utils package
RPROVIDES_${PN}-utils = "${PN}-bin"
RREPLACES_${PN}-utils = "${PN}-bin"
RCONFLICTS_${PN}-utils = "${PN}-bin"
# ntpq was split out of ntp-utils
RDEPENDS_${PN}-utils = "ntpq"

SYSTEMD_PACKAGES = "${PN} ntpdate sntp"
SYSTEMD_SERVICE_${PN} = "ntpd.service"
SYSTEMD_SERVICE_ntpdate = "ntpdate.service"
SYSTEMD_SERVICE_sntp = "sntp.service"
SYSTEMD_AUTO_ENABLE_sntp = "disable"

RPROVIDES_${PN} += "${PN}-systemd"
RREPLACES_${PN} += "${PN}-systemd"
RCONFLICTS_${PN} += "${PN}-systemd"

RPROVIDES_ntpdate += "ntpdate-systemd"
RREPLACES_ntpdate += "ntpdate-systemd"
RCONFLICTS_ntpdate += "ntpdate-systemd"

RSUGGESTS_${PN} = "iana-etc"

FILES_${PN} = "${sbindir}/ntpd.ntp ${sysconfdir}/ntp.conf ${sysconfdir}/init.d/ntpd ${libdir} \
     ${NTP_USER_HOME} \
     ${systemd_unitdir}/ntp-units.d/60-ntpd.list ${libexecdir}\

"
FILES_${PN}-tickadj = "${sbindir}/tickadj" FILES_${PN}-utils = "${sbindir} ${datadir}/ntp/lib" RDEPENDS_${PN}-utils += "perl"

FILES_ntpdate = "${sbindir}/ntpdate \
     ${sysconfdir}/network/if-up.d/ntpdate-sync \
     ${bindir}/ntpdate-sync \
     ${sysconfdir}/default/ntpdate \
     ${systemd_unitdir}/system/ntpdate.service \
"
FILES_sntp = "${sbindir}/sntp \
               ${sysconfdir}/default/sntp \
               ${systemd_unitdir}/system/sntp.service \
              "

FILES_ntpq = "${sbindir}/ntpq"

CONFFILES_${PN} = "${sysconfdir}/ntp.conf" CONFFILES_ntpdate = "${sysconfdir}/default/ntpdate"

INITSCRIPT_NAME = "ntpd"
# No dependencies, so just go in at the standard level (20) INITSCRIPT_PARAMS = "defaults"

pkg_postinst_ntpdate() {
if ! grep -q -s ntpdate $D/var/spool/cron/root; then
echo "adding crontab"
test -d $D/var/spool/cron || mkdir -p $D/var/spool/cron
echo "30 * * * * ${bindir}/ntpdate-sync silent" >> $D/var/spool/cron/root
fi
}

inherit update-alternatives

ALTERNATIVE_PRIORITY = "100"

ALTERNATIVE_${PN} = "ntpd"
ALTERNATIVE_LINK_NAME[ntpd] = "${sbindir}/ntpd"

Now the ntpq package is missing from the rootfile system while its there in package-split and image directory of the ntp app.

Can anyone tell me what could be the problem.
Thanks and regards
Kamal Pandey