Skip to contentSkip to conversation

mac802154: drain mac_wq before unregistering interfaces

PATCH In review Xuanqiang Luo 2 participants 3 messages Aug 28 – Sep 1

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 mac802154: drain mac_wq before unregistering interfaces

From: Xuanqiang Luo <[email protected]>

ieee802154_unregister_hw() unregisters the wpan netdevs before destroying mac_wq. The RX path stores the receiving sub-interface (sdata) in the queued MAC command descriptor without taking a reference to the netdev.

If mac802154_rx_mac_cmd_worker() runs after the netdev has been freed, it dereferences the stale pointer and triggers a KASAN slab-use-after-free:

  BUG: KASAN: slab-use-after-free in mac802154_rx_mac_cmd_worker+0xc0/0x498 [mac802154]
  Read of size 8 at addr ffff0000c6db0ba8 by task kworker/u16:3/61
  ...
  Call trace:
   show_stack+0x20/0x38 (C)
   dump_stack_lvl+0x78/0x90
   print_address_description.constprop.0+0x88/0x398
   print_report+0xa8/0x278
   kasan_report+0xa8/0xf8
   __asan_load8+0x9c/0xc0
   mac802154_rx_mac_cmd_worker+0xc0/0x498 [mac802154]
   process_one_work+0x334/0x8b8
  ...
  Allocated by task 630:
   kasan_save_stack+0x2c/0x58
   kasan_save_track+0x20/0x40
   kasan_save_alloc_info+0x40/0x58
   __kasan_kmalloc+0xa0/0xb8
   __kvmalloc_node_noprof+0x1e8/0x588
   alloc_netdev_mqs+0x74/0x7f0
   ieee802154_if_add+0xac/0x630 [mac802154]
   ieee802154_register_hw+0x31c/0x3d0 [mac802154]
   fakelb_add_one+0x250/0x318 [fakelb]
  ...
  Freed by task 652:
   kasan_save_stack+0x2c/0x58
   kasan_save_track+0x20/0x40
   kasan_save_free_info+0x4c/0x78
   __kasan_slab_free+0x60/0x90
   kfree+0x194/0x478
   kvfree+0x44/0x60
   netdev_release+0x4c/0x68
   device_release+0xac/0x130
   kobject_cleanup+0x84/0x248
   kobject_put+0x98/0xf8
   netdev_run_todo+0x3a0/0x5e0
   rtnl_unlock+0x18/0x30
   ieee802154_unregister_hw+0x48/0x90 [mac802154]
   fakelb_remove+0xe8/0x148 [fakelb]

After killing local->tasklet, drain mac_wq before calling ieee802154_remove_interfaces() so pending work completes before the interfaces are unregistered. Do this without holding rtnl because scan and beacon workers acquire it themselves.

Fixes d021d218f6d9 ("mac802154: Handle received BEACON_REQ")
---
 net/mac802154/main.c | 5 +++++
 1 file changed, 5 insertions(+)
net/mac802154/main.c +5 -0
index ea1efef3572ae..dc80184d7d091 100644
@@ -276,6 +276,11 @@ void ieee802154_unregister_hw(struct ieee802154_hw *hw)
 
 	tasklet_kill(&local->tasklet);
 	flush_workqueue(local->workqueue);
+	/*
+	 * Drain mac_wq before unregistering interfaces; some workers access
+	 * sub-interface data and acquire rtnl themselves.
+	 */
+	drain_workqueue(local->mac_wq);
 
 	rtnl_lock();
 
Signature · 1 line
2.43.0
maintainer Reviewed-by on v1 1/1
#1 lore raw
Quoted 51 lines · Xuanqiang Luo

From: Xuanqiang Luo <[email protected]>

ieee802154_unregister_hw() unregisters the wpan netdevs before destroying mac_wq. The RX path stores the receiving sub-interface (sdata) in the queued MAC command descriptor without taking a reference to the netdev.

If mac802154_rx_mac_cmd_worker() runs after the netdev has been freed, it dereferences the stale pointer and triggers a KASAN slab-use-after-free:

  BUG: KASAN: slab-use-after-free in mac802154_rx_mac_cmd_worker+0xc0/0x498 [mac802154]
  Read of size 8 at addr ffff0000c6db0ba8 by task kworker/u16:3/61
  ...
  Call trace:
   show_stack+0x20/0x38 (C)
   dump_stack_lvl+0x78/0x90
   print_address_description.constprop.0+0x88/0x398
   print_report+0xa8/0x278
   kasan_report+0xa8/0xf8
   __asan_load8+0x9c/0xc0
   mac802154_rx_mac_cmd_worker+0xc0/0x498 [mac802154]
   process_one_work+0x334/0x8b8
  ...
  Allocated by task 630:
   kasan_save_stack+0x2c/0x58
   kasan_save_track+0x20/0x40
   kasan_save_alloc_info+0x40/0x58
   __kasan_kmalloc+0xa0/0xb8
   __kvmalloc_node_noprof+0x1e8/0x588
   alloc_netdev_mqs+0x74/0x7f0
   ieee802154_if_add+0xac/0x630 [mac802154]
   ieee802154_register_hw+0x31c/0x3d0 [mac802154]
   fakelb_add_one+0x250/0x318 [fakelb]
  ...
  Freed by task 652:
   kasan_save_stack+0x2c/0x58
   kasan_save_track+0x20/0x40
   kasan_save_free_info+0x4c/0x78
   __kasan_slab_free+0x60/0x90
   kfree+0x194/0x478
   kvfree+0x44/0x60
   netdev_release+0x4c/0x68
   device_release+0xac/0x130
   kobject_cleanup+0x84/0x248
   kobject_put+0x98/0xf8
   netdev_run_todo+0x3a0/0x5e0
   rtnl_unlock+0x18/0x30
   ieee802154_unregister_hw+0x48/0x90 [mac802154]
   fakelb_remove+0xe8/0x148 [fakelb]
Quoted 7 lines

After killing local->tasklet, drain mac_wq before calling ieee802154_remove_interfaces() so pending work completes before the interfaces are unregistered. Do this without holding rtnl because scan and beacon workers acquire it themselves.

Fixes d021d218f6d9 ("mac802154: Handle received BEACON_REQ")

Missing Cc: stable.

Thanks,
Miquèl

#2 lore raw
Quoted 58 lines · Miquel Raynal
Quoted 56 lines · Xuanqiang Luo

From: Xuanqiang Luo <[email protected]>

ieee802154_unregister_hw() unregisters the wpan netdevs before destroying mac_wq. The RX path stores the receiving sub-interface (sdata) in the queued MAC command descriptor without taking a reference to the netdev.

If mac802154_rx_mac_cmd_worker() runs after the netdev has been freed, it dereferences the stale pointer and triggers a KASAN slab-use-after-free:

   BUG: KASAN: slab-use-after-free in mac802154_rx_mac_cmd_worker+0xc0/0x498 [mac802154]
   Read of size 8 at addr ffff0000c6db0ba8 by task kworker/u16:3/61
   ...
   Call trace:
    show_stack+0x20/0x38 (C)
    dump_stack_lvl+0x78/0x90
    print_address_description.constprop.0+0x88/0x398
    print_report+0xa8/0x278
    kasan_report+0xa8/0xf8
    __asan_load8+0x9c/0xc0
    mac802154_rx_mac_cmd_worker+0xc0/0x498 [mac802154]
    process_one_work+0x334/0x8b8
   ...
   Allocated by task 630:
    kasan_save_stack+0x2c/0x58
    kasan_save_track+0x20/0x40
    kasan_save_alloc_info+0x40/0x58
    __kasan_kmalloc+0xa0/0xb8
    __kvmalloc_node_noprof+0x1e8/0x588
    alloc_netdev_mqs+0x74/0x7f0
    ieee802154_if_add+0xac/0x630 [mac802154]
    ieee802154_register_hw+0x31c/0x3d0 [mac802154]
    fakelb_add_one+0x250/0x318 [fakelb]
   ...
   Freed by task 652:
    kasan_save_stack+0x2c/0x58
    kasan_save_track+0x20/0x40
    kasan_save_free_info+0x4c/0x78
    __kasan_slab_free+0x60/0x90
    kfree+0x194/0x478
    kvfree+0x44/0x60
    netdev_release+0x4c/0x68
    device_release+0xac/0x130
    kobject_cleanup+0x84/0x248
    kobject_put+0x98/0xf8
    netdev_run_todo+0x3a0/0x5e0
    rtnl_unlock+0x18/0x30
    ieee802154_unregister_hw+0x48/0x90 [mac802154]
    fakelb_remove+0xe8/0x148 [fakelb]

After killing local->tasklet, drain mac_wq before calling ieee802154_remove_interfaces() so pending work completes before the interfaces are unregistered. Do this without holding rtnl because scan and beacon workers acquire it themselves.

Quoted 8 lines
Quoted 2 lines
Fixes d021d218f6d9 ("mac802154: Handle received BEACON_REQ")

Missing Cc: stable.

Thanks,
Miquèl

Thanks.

I see Sashiko has also found a few new issues, which look valid. I'll address them as well in the next revision.

pw-bot: cr