Nokia RX-51: Convert to CONFIG_DM_MMC
PATCH 1/1 Nokia RX-51: Convert to CONFIG_DM_MMC
Move twl4030_power_mmc_init() from board_mmc_power_init() to misc_init_r() and disable CONFIG_SYS_MALLOC_F. Otherwise U-Boot cannot initialize MMC. Also disable CONFIG_CMD_SLEEP and CONFIG_DM_DEVICE_REMOVE to free some space.
--- board/nokia/rx51/rx51.c | 32 ++++++++++++++++---------------- configs/nokia_rx51_defconfig | 4 ++++ 2 files changed, 20 insertions(+), 16 deletions(-)
board/nokia/rx51/rx51.c +16 -16
@@ -415,6 +415,8 @@ int misc_init_r(void)/* initialize twl4030 power managment */ twl4030_power_init (); +twl4030_power_mmc_init (0 ); +twl4030_power_mmc_init (1 );/* set VSIM to 1.8V */ twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VSIM_DEDICATED,
@@ -686,22 +688,18 @@ int rx51_kp_getc(struct stdio_dev *sdev)return keybuf[keybuf_head++]; } -/* -* Routine: board_mmc_init -* Description: Initialize mmc devices. -*/ -int board_mmc_init (struct bd_info *bis) -{ -omap_mmc_init (0 ,0 ,0 ,-1 ,-1 ); -omap_mmc_init (1 ,0 ,0 ,-1 ,-1 ); -return 0 ; -} +static const struct mmc_config rx51_mmc_cfg = { + .host_caps =MMC_MODE_4BIT | MMC_MODE_HS_52MHz |MMC_MODE_HS , + .f_min =400000 , + .f_max =52000000 , + .b_max =CONFIG_SYS_MMC_MAX_BLK_COUNT , + .voltages =MMC_VDD_32_33 |MMC_VDD_33_34 |MMC_VDD_165_195 , +}; -void board_mmc_power_init (void ) -{ -twl4030_power_mmc_init (0 ); -twl4030_power_mmc_init (1 ); -} +static const struct omap_hsmmc_plat rx51_mmc[] = { + { rx51_mmc_cfg, (struct hsmmc *)OMAP_HSMMC1_BASE }, + { rx51_mmc_cfg, (struct hsmmc *)OMAP_HSMMC2_BASE }, +};static const struct omap_i2c_platdata rx51_i2c[] = { {I2C_BASE1 ,100000 ,OMAP_I2C_REV_V1 },
@@ -709,7 +707,9 @@ static const struct omap_i2c_platdata rx51_i2c[] = { { I2C_BASE3, 100000, OMAP_I2C_REV_V1 }, }; -U_BOOT_DEVICES (rx51_i2c) = { +U_BOOT_DEVICES (rx51) = { + {"omap_hsmmc" , &rx51_mmc[0 ] }, + {"omap_hsmmc" , &rx51_mmc[1 ] }, {"i2c_omap" , &rx51_i2c[0 ] }, {"i2c_omap" , &rx51_i2c[1 ] }, { "i2c_omap", &rx51_i2c[2] },
configs/nokia_rx51_defconfig +4 -0
@@ -29,6 +29,7 @@ CONFIG_CMD_BOOTMENU=y # CONFIG_CMD_SAVEENV is not set # CONFIG_CMD_ENV_EXISTS is not set # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SLEEP is not set CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y
@@ -62,3 +63,6 @@ CONFIG_SPLASH_SCREEN=y # CONFIG_GZIP is not set CONFIG_DM=y CONFIG_DM_I2C=y +CONFIG_DM_MMC=y +# CONFIG_DM_DEVICE_REMOVE is not set +# CONFIG_SYS_MALLOC_F is not set
Signature · 1 line
2.20.1
PATCH 1/1 Nokia RX-51: Convert to CONFIG_DM_MMC
Hi Pali,
[...snip...]
Quoted 10 lines
+++ b/configs/nokia_rx51_defconfig
configs/nokia_rx51_defconfig +1
-0@@ -29,6 +29,7 @@ CONFIG_CMD_BOOTMENU=y # CONFIG_CMD_SAVEENV is not set # CONFIG_CMD_ENV_EXISTS is not set # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SLEEP is not set CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y
configs/nokia_rx51_defconfig CONFIG_SPLASH_SCREEN=y · line 68
Quoted 6 lines
configs/nokia_rx51_defconfig +3
-0@@ -62,3 +63,6 @@ CONFIG_SPLASH_SCREEN=y # CONFIG_GZIP is not set CONFIG_DM=y CONFIG_DM_I2C=y +CONFIG_DM_MMC=y +# CONFIG_DM_DEVICE_REMOVE is not set +# CONFIG_SYS_MALLOC_F is not set
I am not able to apply this hunk. Is there any dependency on this patch?
Thanks and regards,
Lokesh
Quoted 1 line
PATCH 1/1 Nokia RX-51: Convert to CONFIG_DM_MMC
Quoted 14 lines · On Tuesday 22 December 2020 19:26:21 Lokesh Vutla wrote:
Hi Pali,
[...snip...]
Quoted 10 lines
+++ b/configs/nokia_rx51_defconfig
configs/nokia_rx51_defconfig +1
-0@@ -29,6 +29,7 @@ CONFIG_CMD_BOOTMENU=y # CONFIG_CMD_SAVEENV is not set # CONFIG_CMD_ENV_EXISTS is not set # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SLEEP is not set CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y@@ -62,3 +63,6 @@ CONFIG_SPLASH_SCREEN=y
Quoted 8 lines
configs/nokia_rx51_defconfig CONFIG_SPLASH_SCREEN=y · line 68
Quoted 6 lines
configs/nokia_rx51_defconfig +3
-0# CONFIG_GZIP is not set CONFIG_DM=y CONFIG_DM_I2C=y +CONFIG_DM_MMC=y +# CONFIG_DM_DEVICE_REMOVE is not set +# CONFIG_SYS_MALLOC_F is not setI am not able to apply this hunk. Is there any dependency on this patch?
Hello! In this git branch are applied all patches in the correct order:
https://github.com/pali/u-boot/commits/nokia-rx51
So this patch has dependency on "Nokia RX-51: Decrease i2c speed to 100000" patch.
Quoted 4 lines
Thanks and regards,
LokeshQuoted 1 line
PATCH 1/1 Nokia RX-51: Convert to CONFIG_DM_MMC
Quoted 24 lines · Pali Roh?r
Quoted 14 lines · On Tuesday 22 December 2020 19:26:21 Lokesh Vutla wrote:
Hi Pali,
[...snip...]
Quoted 10 lines
+++ b/configs/nokia_rx51_defconfig
configs/nokia_rx51_defconfig +1
-0@@ -29,6 +29,7 @@ CONFIG_CMD_BOOTMENU=y # CONFIG_CMD_SAVEENV is not set # CONFIG_CMD_ENV_EXISTS is not set # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SLEEP is not set CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y@@ -62,3 +63,6 @@ CONFIG_SPLASH_SCREEN=yQuoted 8 lines
configs/nokia_rx51_defconfig CONFIG_SPLASH_SCREEN=y · line 68
Quoted 6 lines
configs/nokia_rx51_defconfig +3
-0# CONFIG_GZIP is not set CONFIG_DM=y CONFIG_DM_I2C=y +CONFIG_DM_MMC=y +# CONFIG_DM_DEVICE_REMOVE is not set +# CONFIG_SYS_MALLOC_F is not setI am not able to apply this hunk. Is there any dependency on this patch?
Quoted 2 lines
Hello! In this git branch are applied all patches in the correct order:
https://github.com/pali/u-boot/commits/nokia-rx51
One of the patch caused Gitlab pipeline failure. Can you check
https://pastebin.ubuntu.com/p/fjQKyBYQdj/?
Quoted 8 lines
So this patch has dependency on "Nokia RX-51: Decrease i2c speed to 100000" patch.
Quoted 4 lines
Thanks and regards,
LokeshQuoted 1 line
PATCH 1/1 Nokia RX-51: Convert to CONFIG_DM_MMC
Quoted 27 lines · On Tuesday 22 December 2020 20:20:26 Lokesh Vutla wrote:
Quoted 24 lines · Pali Roh?r
Quoted 22 lines · On Tuesday 22 December 2020 19:26:21 Lokesh Vutla wrote:
Hi Pali,
[...snip...]
Quoted 10 lines
+++ b/configs/nokia_rx51_defconfig
configs/nokia_rx51_defconfig +1
-0@@ -29,6 +29,7 @@ CONFIG_CMD_BOOTMENU=y # CONFIG_CMD_SAVEENV is not set # CONFIG_CMD_ENV_EXISTS is not set # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SLEEP is not set CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=yconfigs/nokia_rx51_defconfig CONFIG_SPLASH_SCREEN=y · line 68
Quoted 6 lines
configs/nokia_rx51_defconfig +3
-0@@ -62,3 +63,6 @@ CONFIG_SPLASH_SCREEN=y # CONFIG_GZIP is not set CONFIG_DM=y CONFIG_DM_I2C=y +CONFIG_DM_MMC=y +# CONFIG_DM_DEVICE_REMOVE is not set +# CONFIG_SYS_MALLOC_F is not setI am not able to apply this hunk. Is there any dependency on this patch?
Quoted 5 lines
Quoted 2 lines
Hello! In this git branch are applied all patches in the correct order:
https://github.com/pali/u-boot/commits/nokia-rx51One of the patch caused Gitlab pipeline failure. Can you check
https://pastebin.ubuntu.com/p/fjQKyBYQdj/?
Have you used patches in the correct order?
Because I put my above branch to github testing pipeline and all tests passed. See results:
https://github.com/u-boot/u-boot/pull/40
https://travis-ci.org/github/u-boot/u-boot/builds/746775905
https://github.com/u-boot/u-boot/runs/1474847620
Quoted 8 lines
Quoted 8 lines
So this patch has dependency on "Nokia RX-51: Decrease i2c speed to 100000" patch.
Quoted 4 lines
Thanks and regards,
LokeshQuoted 1 line
PATCH 1/1 Nokia RX-51: Convert to CONFIG_DM_MMC
In reply to Pali RohárQuoted 82 lines · Pali Roh?r
Move
twl4030_power_mmc_init()fromboard_mmc_power_init()tomisc_init_r()and disableCONFIG_SYS_MALLOC_F. Otherwise U-Boot cannot initialize MMC. Also disableCONFIG_CMD_SLEEPandCONFIG_DM_DEVICE_REMOVEto free some space.Signed-off-by Pali Roh?r <[email protected]>--- board/nokia/rx51/rx51.c | 32 ++++++++++++++++---------------- configs/nokia_rx51_defconfig | 4 ++++ 2 files changed, 20 insertions(+), 16 deletions(-)board/nokia/rx51/rx51.c +16
-16@@ -415,6 +415,8 @@ int misc_init_r(void)/* initialize twl4030 power managment */ twl4030_power_init (); +twl4030_power_mmc_init (0 ); +twl4030_power_mmc_init (1 );/* set VSIM to 1.8V */ twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VSIM_DEDICATED,@@ -686,22 +688,18 @@ int rx51_kp_getc(struct stdio_dev *sdev)return keybuf[keybuf_head++]; } -/* -* Routine: board_mmc_init -* Description: Initialize mmc devices. -*/ -int board_mmc_init (struct bd_info *bis) -{ -omap_mmc_init (0 ,0 ,0 ,-1 ,-1 ); -omap_mmc_init (1 ,0 ,0 ,-1 ,-1 ); -return 0 ; -} +static const struct mmc_config rx51_mmc_cfg = { + .host_caps =MMC_MODE_4BIT | MMC_MODE_HS_52MHz |MMC_MODE_HS , + .f_min =400000 , + .f_max =52000000 , + .b_max =CONFIG_SYS_MMC_MAX_BLK_COUNT , + .voltages =MMC_VDD_32_33 |MMC_VDD_33_34 |MMC_VDD_165_195 , +}; -void board_mmc_power_init (void ) -{ -twl4030_power_mmc_init (0 ); -twl4030_power_mmc_init (1 ); -} +static const struct omap_hsmmc_plat rx51_mmc[] = { + { rx51_mmc_cfg, (struct hsmmc *)OMAP_HSMMC1_BASE }, + { rx51_mmc_cfg, (struct hsmmc *)OMAP_HSMMC2_BASE }, +};static const struct omap_i2c_platdata rx51_i2c[] = { {I2C_BASE1 ,100000 ,OMAP_I2C_REV_V1 },@@ -709,7 +707,9 @@ static const struct omap_i2c_platdata rx51_i2c[] = { { I2C_BASE3, 100000, OMAP_I2C_REV_V1 }, }; -U_BOOT_DEVICES (rx51_i2c) = { +U_BOOT_DEVICES (rx51) = { + {"omap_hsmmc" , &rx51_mmc[0 ] }, + {"omap_hsmmc" , &rx51_mmc[1 ] }, {"i2c_omap" , &rx51_i2c[0 ] }, {"i2c_omap" , &rx51_i2c[1 ] }, { "i2c_omap", &rx51_i2c[2] },configs/nokia_rx51_defconfig +1
-0@@ -29,6 +29,7 @@ CONFIG_CMD_BOOTMENU=y # CONFIG_CMD_SAVEENV is not set # CONFIG_CMD_ENV_EXISTS is not set # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SLEEP is not set CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y
configs/nokia_rx51_defconfig CONFIG_SPLASH_SCREEN=y · line 68
Quoted 6 lines
configs/nokia_rx51_defconfig +3
-0@@ -62,3 +63,6 @@ CONFIG_SPLASH_SCREEN=y # CONFIG_GZIP is not set CONFIG_DM=y CONFIG_DM_I2C=y +CONFIG_DM_MMC=y +# CONFIG_DM_DEVICE_REMOVE is not set +# CONFIG_SYS_MALLOC_F is not set
As you suggested disabled MMC_VERBOSE and applied to u-boot-ti/for-next branch.
Thanks and regards,
Lokesh
Quoted 1 line
PATCH 1/1 Nokia RX-51: Convert to CONFIG_DM_MMC
In reply to Pali RohárHi Pali,
Quoted 59 lines · Pali Roh?r
Move
twl4030_power_mmc_init()fromboard_mmc_power_init()tomisc_init_r()and disableCONFIG_SYS_MALLOC_F. Otherwise U-Boot cannot initialize MMC. Also disableCONFIG_CMD_SLEEPandCONFIG_DM_DEVICE_REMOVEto free some space.Signed-off-by Pali Roh?r <[email protected]>--- board/nokia/rx51/rx51.c | 32 ++++++++++++++++---------------- configs/nokia_rx51_defconfig | 4 ++++ 2 files changed, 20 insertions(+), 16 deletions(-)board/nokia/rx51/rx51.c +13
-15@@ -415,6 +415,8 @@ int misc_init_r(void)/* initialize twl4030 power managment */ twl4030_power_init (); +twl4030_power_mmc_init (0 ); +twl4030_power_mmc_init (1 );/* set VSIM to 1.8V */ twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VSIM_DEDICATED,@@ -686,22 +688,18 @@ int rx51_kp_getc(struct stdio_dev *sdev)return keybuf[keybuf_head++]; } -/* -* Routine: board_mmc_init -* Description: Initialize mmc devices. -*/ -int board_mmc_init (struct bd_info *bis) -{ -omap_mmc_init (0 ,0 ,0 ,-1 ,-1 ); -omap_mmc_init (1 ,0 ,0 ,-1 ,-1 ); -return 0 ; -} +static const struct mmc_config rx51_mmc_cfg = { + .host_caps =MMC_MODE_4BIT | MMC_MODE_HS_52MHz |MMC_MODE_HS , + .f_min =400000 , + .f_max =52000000 , + .b_max =CONFIG_SYS_MMC_MAX_BLK_COUNT , + .voltages =MMC_VDD_32_33 |MMC_VDD_33_34 |MMC_VDD_165_195 , +}; -void board_mmc_power_init (void ) -{ -twl4030_power_mmc_init (0 ); -twl4030_power_mmc_init (1 ); -} +static const struct omap_hsmmc_plat rx51_mmc[] = { + { rx51_mmc_cfg, (struct hsmmc *)OMAP_HSMMC1_BASE }, + { rx51_mmc_cfg, (struct hsmmc *)OMAP_HSMMC2_BASE }, +};static const struct omap_i2c_platdata rx51_i2c[] = { {I2C_BASE1 ,100000 ,OMAP_I2C_REV_V1 },
board/nokia/rx51/rx51.c static const struct omap_i2c_platdata rx51_i2c[] = { · line 710
Quoted 5 lines
board/nokia/rx51/rx51.c +1
-1@@ -709,7 +707,9 @@ static const struct omap_i2c_platdata rx51_i2c[] = { { I2C_BASE3, 100000, OMAP_I2C_REV_V1 }, }; -U_BOOT_DEVICES(rx51_i2c) = { +U_BOOT_DEVICES(rx51) = {
Tom has raised few questions on this when sending the PR, can you please clarify?
Thanks and regards,
Lokesh
Quoted 25 lines
board/nokia/rx51/rx51.c +2
-0+ { "omap_hsmmc", &rx51_mmc[0] }, + { "omap_hsmmc", &rx51_mmc[1] }, { "i2c_omap", &rx51_i2c[0] }, { "i2c_omap", &rx51_i2c[1] }, { "i2c_omap", &rx51_i2c[2] },configs/nokia_rx51_defconfig +4
-0@@ -29,6 +29,7 @@ CONFIG_CMD_BOOTMENU=y # CONFIG_CMD_SAVEENV is not set # CONFIG_CMD_ENV_EXISTS is not set # CONFIG_CMD_FLASH is not set +# CONFIG_CMD_SLEEP is not set CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y@@ -62,3 +63,6 @@ CONFIG_SPLASH_SCREEN=y # CONFIG_GZIP is not set CONFIG_DM=y CONFIG_DM_I2C=y +CONFIG_DM_MMC=y +# CONFIG_DM_DEVICE_REMOVE is not set +# CONFIG_SYS_MALLOC_F is not set
PATCH v2 1/1 Nokia RX-51: Convert to CONFIG_DM_MMC
In reply to Pali RohárMove twl4030_power_mmc_init() from board_mmc_power_init() to misc_init_r() and disable CONFIG_SYS_MALLOC_F. Otherwise U-Boot cannot initialize MMC. Also disable CONFIG_CMD_SLEEP CONFIG_DM_DEVICE_REMOVE CONFIG_MMC_VERBOSE to free some space.
---
Changes in v2:
* Disable also CONFIG_MMC_VERBOSE
* Put mmc definition into separate U_BOOT_DRVINFOS
--- board/nokia/rx51/rx51.c | 33 ++++++++++++++++++--------------- configs/nokia_rx51_defconfig | 5 +++++ 2 files changed, 23 insertions(+), 15 deletions(-)
board/nokia/rx51/rx51.c +18 -15
@@ -415,6 +415,8 @@ int misc_init_r(void)/* initialize twl4030 power managment */ twl4030_power_init (); +twl4030_power_mmc_init (0 ); +twl4030_power_mmc_init (1 );/* set VSIM to 1.8V */ twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VSIM_DEDICATED,
@@ -686,22 +688,23 @@ int rx51_kp_getc(struct stdio_dev *sdev)return keybuf[keybuf_head++]; } -/* -* Routine: board_mmc_init -* Description: Initialize mmc devices. -*/ -int board_mmc_init (struct bd_info *bis) -{ -omap_mmc_init (0 ,0 ,0 ,-1 ,-1 ); -omap_mmc_init (1 ,0 ,0 ,-1 ,-1 ); -return 0 ; -} +static const struct mmc_config rx51_mmc_cfg = { + .host_caps =MMC_MODE_4BIT | MMC_MODE_HS_52MHz |MMC_MODE_HS , + .f_min =400000 , + .f_max =52000000 , + .b_max =CONFIG_SYS_MMC_MAX_BLK_COUNT , + .voltages =MMC_VDD_32_33 |MMC_VDD_33_34 |MMC_VDD_165_195 , +}; -void board_mmc_power_init (void ) -{ -twl4030_power_mmc_init (0 ); -twl4030_power_mmc_init (1 ); -} +static const struct omap_hsmmc_plat rx51_mmc[] = { + { rx51_mmc_cfg, (struct hsmmc *)OMAP_HSMMC1_BASE }, + { rx51_mmc_cfg, (struct hsmmc *)OMAP_HSMMC2_BASE }, +}; + +U_BOOT_DRVINFOS (rx51_mmc) = { + {"omap_hsmmc" , &rx51_mmc[0 ] }, + {"omap_hsmmc" , &rx51_mmc[1 ] }, +};static const struct omap_i2c_plat rx51_i2c[] = { {I2C_BASE1 ,100000 ,OMAP_I2C_REV_V1 },
configs/nokia_rx51_defconfig +5 -0
@@ -4,6 +4,7 @@ CONFIG_ARCH_OMAP2PLUS=y CONFIG_SYS_TEXT_BASE=0x80008000 CONFIG_NR_DRAM_BANKS=2 CONFIG_TARGET_NOKIA_RX51=y +# CONFIG_SYS_MALLOC_F is not set # CONFIG_TI_SYSC is not set # CONFIG_FIT is not set CONFIG_BOOTDELAY=30
@@ -36,6 +37,7 @@ CONFIG_CMD_MMC=y CONFIG_CMD_MTD=y CONFIG_CMD_ONENAND=y # CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_SLEEP is not set CONFIG_CMD_EXT2=y CONFIG_CMD_EXT4=y CONFIG_CMD_FAT=y
@@ -45,9 +47,12 @@ CONFIG_ENV_OVERWRITE=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y # CONFIG_NET is not set CONFIG_DM=y +# CONFIG_DM_DEVICE_REMOVE is not set CONFIG_DM_I2C=y CONFIG_TWL4030_LED=y +CONFIG_DM_MMC=y # CONFIG_MMC_HW_PARTITIONING is not set +# CONFIG_MMC_VERBOSE is not set CONFIG_MMC_OMAP_HS=y CONFIG_MTD=y CONFIG_CONS_INDEX=3
Signature · 1 line
2.20.1
PATCH v2 1/1 Nokia RX-51: Convert to CONFIG_DM_MMC
Quoted 7 lines · Pali Roh?r
Move
twl4030_power_mmc_init()fromboard_mmc_power_init()tomisc_init_r()and disableCONFIG_SYS_MALLOC_F. Otherwise U-Boot cannot initialize MMC. Also disableCONFIG_CMD_SLEEPCONFIG_DM_DEVICE_REMOVECONFIG_MMC_VERBOSEto free some space.Signed-off-by Pali Roh?r <[email protected]>
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: <https://lists.denx.de/pipermail/u-boot/attachments/20210116/04456568/attachment.sig>
PATCH v2 1/1 Nokia RX-51: Convert to CONFIG_DM_MMC
Quoted 7 lines · Tom Rini
Quoted 5 lines · Pali Roh?r
Move
twl4030_power_mmc_init()fromboard_mmc_power_init()tomisc_init_r()and disableCONFIG_SYS_MALLOC_F. Otherwise U-Boot cannot initialize MMC. Also disableCONFIG_CMD_SLEEPCONFIG_DM_DEVICE_REMOVECONFIG_MMC_VERBOSEto free some space.
Quoted 5 lines
Quoted 2 lines
Signed-off-by Pali Roh?r <[email protected]>Reviewed-by Tom Rini <[email protected]>
Applied to u-boot-ti/for-rc branch.
Thanks and regards,
Lokesh