KVM: s390: selftests: Provide TAP output in tests
v2 cover KVM: s390: selftests: Provide TAP output in tests
This patch series is motivated by Shuah's suggestion here:
https://lore.kernel.org/kvm/[email protected]/
Many s390x KVM selftests do not output any information about which tests have been run, so it's hard to say whether a test binary contains a certain sub-test or not. To improve this situation let's add some TAP output via the kselftest.h interface to these tests, so that it easier to understand what has been executed or not.
v2:
- Reworked the extension checking in the first patch
- Make sure to always print the TAP 13 header in the second patch
- Reworked the SKIP printing in the third patch
Thomas Huth (4):
KVM: s390: selftests: Use TAP interface in the memop test
KVM: s390: selftests: Use TAP interface in the sync_regs test
KVM: s390: selftests: Use TAP interface in the tprot test
KVM: s390: selftests: Use TAP interface in the reset test
tools/testing/selftests/kvm/s390x/memop.c | 90 +++++++++++++++---- tools/testing/selftests/kvm/s390x/resets.c | 38 ++++++-- .../selftests/kvm/s390x/sync_regs_test.c | 87 +++++++++++++----- tools/testing/selftests/kvm/s390x/tprot.c | 28 ++++-- 4 files changed, 192 insertions(+), 51 deletions(-)
Signature · 1 line
2.27.0
PATCH v2 1/4 KVM: s390: selftests: Use TAP interface in the memop test
The memop test currently does not have any output (unless one of the TEST_ASSERT statement fails), so it's hard to say for a user whether a certain new sub-test has been included in the binary or not. Let's make this a little bit more user-friendly and include some TAP output via the kselftests.h interface.
--- tools/testing/selftests/kvm/s390x/memop.c | 90 ++++++++++++++++++----- 1 file changed, 73 insertions(+), 17 deletions(-)
tools/testing/selftests/kvm/s390x/memop.c +73 -17
@@ -12,6 +12,7 @@#include "test_util.h" #include "kvm_util.h" +#include "kselftest.h" enum mop_target {LOGICAL ,
@@ -648,33 +649,88 @@ static void test_errors(void)kvm_vm_free (t.kvm_vm); } +struct testdef { +const char *name; +void (*test)(void ); +int cap; +} testlist[] = { + { + .name ="simple copy" , + .test = test_copy, + }, + { + .name ="generic error checks" , + .test = test_errors, + }, + { + .name ="copy with storage keys" , + .test = test_copy_key, + .cap =KVM_CAP_S390_MEM_OP_EXTENSION , + }, + { + .name ="copy with key storage protection override" , + .test = test_copy_key_storage_prot_override, + .cap =KVM_CAP_S390_MEM_OP_EXTENSION , + }, + { + .name ="copy with key fetch protection" , + .test = test_copy_key_fetch_prot, + .cap =KVM_CAP_S390_MEM_OP_EXTENSION , + }, + { + .name ="copy with key fetch protection override" , + .test = test_copy_key_fetch_prot_override, + .cap =KVM_CAP_S390_MEM_OP_EXTENSION , + }, + { + .name ="error checks with key" , + .test = test_errors_key, + .cap =KVM_CAP_S390_MEM_OP_EXTENSION , + }, + { + .name ="error checks with key storage protection override" , + .test = test_errors_key_storage_prot_override, + .cap =KVM_CAP_S390_MEM_OP_EXTENSION , + }, + { + .name ="error checks without key fetch prot override" , + .test = test_errors_key_fetch_prot_override_not_enabled, + .cap =KVM_CAP_S390_MEM_OP_EXTENSION , + }, + { + .name ="error checks with key fetch prot override" , + .test = test_errors_key_fetch_prot_override_enabled, + .cap =KVM_CAP_S390_MEM_OP_EXTENSION , + }, +}; +int main (int argc,char *argv[]) { -int memop_cap, extension_cap; +int memop_cap, extension_cap, idx;setbuf (stdout,NULL );/* Tell stdout not to buffer its content */ +ksft_print_header (); + memop_cap =kvm_check_cap (KVM_CAP_S390_MEM_OP ); extension_cap =kvm_check_cap (KVM_CAP_S390_MEM_OP_EXTENSION );if (!memop_cap) { -print_skip ("CAP_S390_MEM_OP not supported" ); -exit (KSFT_SKIP ); +ksft_exit_skip ("CAP_S390_MEM_OP not supported.\n" ); } -test_copy (); -if (extension_cap >0 ) { -test_copy_key (); -test_copy_key_storage_prot_override (); -test_copy_key_fetch_prot (); -test_copy_key_fetch_prot_override (); -test_errors_key (); -test_errors_key_storage_prot_override (); -test_errors_key_fetch_prot_override_not_enabled (); -test_errors_key_fetch_prot_override_enabled (); - }else { -print_skip ("storage key memop extension not supported" ); +ksft_set_plan (ARRAY_SIZE (testlist)); + +for (idx =0 ; idx <ARRAY_SIZE (testlist); idx++) { +if (!testlist[idx].cap || (extension_cap && + testlist[idx].cap ==KVM_CAP_S390_MEM_OP_EXTENSION )) { + testlist[idx].test (); +ksft_test_result_pass ("%s\n" , testlist[idx].name); + }else { +ksft_test_result_skip ("%s - capability %d not supported\n" , + testlist[idx].name, + testlist[idx].cap); + } } -test_errors (); -return 0 ; +ksft_finished (); }
Signature · 1 line
2.27.0
Re: [PATCH v2 1/4] KVM: s390: selftests: Use TAP interface in the memop test
Quoted 7 lines · Thomas Huth
The memop test currently does not have any output (unless one of the
TEST_ASSERTstatement fails), so it's hard to say for a user whether a certain new sub-test has been included in the binary or not. Let's make this a little bit more user-friendly and include some TAP output via thekselftests.hinterface.Signed-off-by Thomas Huth <[email protected]>
Quoted 122 lines
--- tools/testing/selftests/kvm/s390x/memop.c | 90 ++++++++++++++++++----- 1 file changed, 73 insertions(+), 17 deletions(-)tools/testing/selftests/kvm/s390x/memop.c +73
-17@@ -12,6 +12,7 @@#include "test_util.h" #include "kvm_util.h" +#include "kselftest.h" enum mop_target {LOGICAL ,@@ -648,33 +649,88 @@ static void test_errors(void)kvm_vm_free (t.kvm_vm); } +struct testdef { +const char *name; +void (*test)(void ); +int cap; +} testlist[] = { + { + .name ="simple copy" , + .test = test_copy, + }, + { + .name ="generic error checks" , + .test = test_errors, + }, + { + .name ="copy with storage keys" , + .test = test_copy_key, + .cap =KVM_CAP_S390_MEM_OP_EXTENSION , + }, + { + .name ="copy with key storage protection override" , + .test = test_copy_key_storage_prot_override, + .cap =KVM_CAP_S390_MEM_OP_EXTENSION , + }, + { + .name ="copy with key fetch protection" , + .test = test_copy_key_fetch_prot, + .cap =KVM_CAP_S390_MEM_OP_EXTENSION , + }, + { + .name ="copy with key fetch protection override" , + .test = test_copy_key_fetch_prot_override, + .cap =KVM_CAP_S390_MEM_OP_EXTENSION , + }, + { + .name ="error checks with key" , + .test = test_errors_key, + .cap =KVM_CAP_S390_MEM_OP_EXTENSION , + }, + { + .name ="error checks with key storage protection override" , + .test = test_errors_key_storage_prot_override, + .cap =KVM_CAP_S390_MEM_OP_EXTENSION , + }, + { + .name ="error checks without key fetch prot override" , + .test = test_errors_key_fetch_prot_override_not_enabled, + .cap =KVM_CAP_S390_MEM_OP_EXTENSION , + }, + { + .name ="error checks with key fetch prot override" , + .test = test_errors_key_fetch_prot_override_enabled, + .cap =KVM_CAP_S390_MEM_OP_EXTENSION , + }, +}; +int main (int argc,char *argv[]) { -int memop_cap, extension_cap; +int memop_cap, extension_cap, idx;setbuf (stdout,NULL );/* Tell stdout not to buffer its content */ +ksft_print_header (); + memop_cap =kvm_check_cap (KVM_CAP_S390_MEM_OP ); extension_cap =kvm_check_cap (KVM_CAP_S390_MEM_OP_EXTENSION );if (!memop_cap) { -print_skip ("CAP_S390_MEM_OP not supported" ); -exit (KSFT_SKIP ); +ksft_exit_skip ("CAP_S390_MEM_OP not supported.\n" ); } -test_copy (); -if (extension_cap >0 ) { -test_copy_key (); -test_copy_key_storage_prot_override (); -test_copy_key_fetch_prot (); -test_copy_key_fetch_prot_override (); -test_errors_key (); -test_errors_key_storage_prot_override (); -test_errors_key_fetch_prot_override_not_enabled (); -test_errors_key_fetch_prot_override_enabled (); - }else { -print_skip ("storage key memop extension not supported" ); +ksft_set_plan (ARRAY_SIZE (testlist)); + +for (idx =0 ; idx <ARRAY_SIZE (testlist); idx++) { +if (!testlist[idx].cap || (extension_cap && + testlist[idx].cap ==KVM_CAP_S390_MEM_OP_EXTENSION )) { + testlist[idx].test (); +ksft_test_result_pass ("%s\n" , testlist[idx].name); + }else { +ksft_test_result_skip ("%s - capability %d not supported\n" , + testlist[idx].name, + testlist[idx].cap); + } } -test_errors (); -return 0 ; +ksft_finished (); }
PATCH v2 2/4 KVM: s390: selftests: Use TAP interface in the sync_regs test
In reply to Thomas HuthThe sync_regs test currently does not have any output (unless one of the TEST_ASSERT statement fails), so it's hard to say for a user whether a certain new sub-test has been included in the binary or not. Let's make this a little bit more user-friendly and include some TAP output via the kselftests.h interface.
To be able to distinguish the different sub-tests more easily, we also break up the huge main() function here in more fine grained parts.
--- .../selftests/kvm/s390x/sync_regs_test.c | 87 ++++++++++++++----- 1 file changed, 66 insertions(+), 21 deletions(-)
tools/testing/selftests/kvm/s390x/sync_regs_test.c +66 -21
@@ -21,6 +21,7 @@#include "test_util.h" #include "kvm_util.h" #include "diag318_test_handler.h" +#include "kselftest.h" #define VCPU_ID 5
@@ -74,27 +75,9 @@ static void compare_sregs(struct kvm_sregs *left, struct kvm_sync_regs *right)#define TEST_SYNC_FIELDS (KVM_SYNC_GPRS|KVM_SYNC_ACRS|KVM_SYNC_CRS|KVM_SYNC_DIAG318)#define INVALID_SYNC_FIELD 0x80000000 -int main (int argc,char *argv[]) +void test_read_invalid (struct kvm_vm *vm,struct kvm_run *run) { -struct kvm_vm *vm; -struct kvm_run *run; -struct kvm_regs regs; -struct kvm_sregs sregs; -int rv, cap; - -/* Tell stdout not to buffer its content */ -setbuf (stdout,NULL ); - - cap =kvm_check_cap (KVM_CAP_SYNC_REGS ); -if (!cap) { -print_skip ("CAP_SYNC_REGS not supported" ); -exit (KSFT_SKIP ); - } - -/* Create VM */ - vm =vm_create_default (VCPU_ID ,0 , guest_code); - - run =vcpu_state (vm,VCPU_ID ); +int rv;/* Request reading invalid register set from VCPU. */ run->kvm_valid_regs =INVALID_SYNC_FIELD ;
@@ -110,6 +93,11 @@ int main(int argc, char *argv[])"Invalid kvm_valid_regs did not cause expected KVM_RUN error: %d\n" , rv);vcpu_state (vm,VCPU_ID )->kvm_valid_regs =0 ; +} + +void test_set_invalid (struct kvm_vm *vm,struct kvm_run *run) +{ +int rv;/* Request setting invalid register set into VCPU. */ run->kvm_dirty_regs =INVALID_SYNC_FIELD ;
@@ -125,6 +113,13 @@ int main(int argc, char *argv[])"Invalid kvm_dirty_regs did not cause expected KVM_RUN error: %d\n" , rv);vcpu_state (vm,VCPU_ID )->kvm_dirty_regs =0 ; +} + +void test_req_and_verify_all_valid_regs (struct kvm_vm *vm,struct kvm_run *run) +{ +struct kvm_sregs sregs; +struct kvm_regs regs; +int rv;/* Request and verify all valid register sets. */ run->kvm_valid_regs =TEST_SYNC_FIELDS ;
@@ -146,6 +141,13 @@ int main(int argc, char *argv[])vcpu_sregs_get (vm,VCPU_ID , &sregs);compare_sregs (&sregs, &run->s.regs); +} + +void test_set_and_verify_various_reg_values (struct kvm_vm *vm,struct kvm_run *run) +{ +struct kvm_sregs sregs; +struct kvm_regs regs; +int rv;/* Set and verify various register values */ run->s.regs.gprs[11 ] =0xBAD1DEA ;
@@ -180,6 +182,11 @@ int main(int argc, char *argv[])vcpu_sregs_get (vm,VCPU_ID , &sregs);compare_sregs (&sregs, &run->s.regs); +} + +void test_clear_kvm_dirty_regs_bits (struct kvm_vm *vm,struct kvm_run *run) +{ +int rv;/* Clear kvm_dirty_regs bits, verify new s.regs values are * overwritten with existing guest values.
@@ -200,8 +207,46 @@ int main(int argc, char *argv[])TEST_ASSERT (run->s.regs.diag318 !=0x4B1D ,"diag318 sync regs value incorrect 0x%llx." , run->s.regs.diag318); +} + +struct testdef { +const char *name; +void (*test)(struct kvm_vm *vm,struct kvm_run *run); +} testlist[] = { + {"read invalid" , test_read_invalid }, + {"set invalid" , test_set_invalid }, + {"request+verify all valid regs" , test_req_and_verify_all_valid_regs }, + {"set+verify various regs" , test_set_and_verify_various_reg_values }, + {"clear kvm_dirty_regs bits" , test_clear_kvm_dirty_regs_bits }, +}; + +int main (int argc,char *argv[]) +{ +static struct kvm_run *run; +static struct kvm_vm *vm; +int idx; + +/* Tell stdout not to buffer its content */ +setbuf (stdout,NULL ); + +ksft_print_header (); + +if (!kvm_check_cap (KVM_CAP_SYNC_REGS )) +ksft_exit_skip ("CAP_SYNC_REGS not supported" ); + +ksft_set_plan (ARRAY_SIZE (testlist)); + +/* Create VM */ + vm =vm_create_default (VCPU_ID ,0 , guest_code); + + run =vcpu_state (vm,VCPU_ID ); + +for (idx =0 ; idx <ARRAY_SIZE (testlist); idx++) { + testlist[idx].test (vm, run); +ksft_test_result_pass ("%s\n" , testlist[idx].name); + }kvm_vm_free (vm); -return 0 ; +ksft_finished (); }
Signature · 1 line
2.27.0
Re: [PATCH v2 2/4] KVM: s390: selftests: Use TAP interface in the sync_regs test
Quoted 10 lines · Thomas Huth
The
sync_regstest currently does not have any output (unless one of theTEST_ASSERTstatement fails), so it's hard to say for a user whether a certain new sub-test has been included in the binary or not. Let's make this a little bit more user-friendly and include some TAP output via thekselftests.hinterface.
To be able to distinguish the different sub-tests more easily, we also break up the hugemain()function here in more fine grained parts.Signed-off-by Thomas Huth <[email protected]>
Quoted 146 lines
--- .../selftests/kvm/s390x/sync_regs_test.c | 87 ++++++++++++++----- 1 file changed, 66 insertions(+), 21 deletions(-)tools/testing/selftests/kvm/s390x/sync_regs_test.c +66
-21@@ -21,6 +21,7 @@#include "test_util.h" #include "kvm_util.h" #include "diag318_test_handler.h" +#include "kselftest.h" #define VCPU_ID 5@@ -74,27 +75,9 @@ static void compare_sregs(struct kvm_sregs *left, struct kvm_sync_regs *right)#define TEST_SYNC_FIELDS (KVM_SYNC_GPRS|KVM_SYNC_ACRS|KVM_SYNC_CRS|KVM_SYNC_DIAG318)#define INVALID_SYNC_FIELD 0x80000000 -int main (int argc,char *argv[]) +void test_read_invalid (struct kvm_vm *vm,struct kvm_run *run) { -struct kvm_vm *vm; -struct kvm_run *run; -struct kvm_regs regs; -struct kvm_sregs sregs; -int rv, cap; - -/* Tell stdout not to buffer its content */ -setbuf (stdout,NULL ); - - cap =kvm_check_cap (KVM_CAP_SYNC_REGS ); -if (!cap) { -print_skip ("CAP_SYNC_REGS not supported" ); -exit (KSFT_SKIP ); - } - -/* Create VM */ - vm =vm_create_default (VCPU_ID ,0 , guest_code); - - run =vcpu_state (vm,VCPU_ID ); +int rv;/* Request reading invalid register set from VCPU. */ run->kvm_valid_regs =INVALID_SYNC_FIELD ;@@ -110,6 +93,11 @@ int main(int argc, char *argv[])"Invalid kvm_valid_regs did not cause expected KVM_RUN error: %d\n" , rv);vcpu_state (vm,VCPU_ID )->kvm_valid_regs =0 ; +} + +void test_set_invalid (struct kvm_vm *vm,struct kvm_run *run) +{ +int rv;/* Request setting invalid register set into VCPU. */ run->kvm_dirty_regs =INVALID_SYNC_FIELD ;@@ -125,6 +113,13 @@ int main(int argc, char *argv[])"Invalid kvm_dirty_regs did not cause expected KVM_RUN error: %d\n" , rv);vcpu_state (vm,VCPU_ID )->kvm_dirty_regs =0 ; +} + +void test_req_and_verify_all_valid_regs (struct kvm_vm *vm,struct kvm_run *run) +{ +struct kvm_sregs sregs; +struct kvm_regs regs; +int rv;/* Request and verify all valid register sets. */ run->kvm_valid_regs =TEST_SYNC_FIELDS ;@@ -146,6 +141,13 @@ int main(int argc, char *argv[])vcpu_sregs_get (vm,VCPU_ID , &sregs);compare_sregs (&sregs, &run->s.regs); +} + +void test_set_and_verify_various_reg_values (struct kvm_vm *vm,struct kvm_run *run) +{ +struct kvm_sregs sregs; +struct kvm_regs regs; +int rv;/* Set and verify various register values */ run->s.regs.gprs[11 ] =0xBAD1DEA ;@@ -180,6 +182,11 @@ int main(int argc, char *argv[])vcpu_sregs_get (vm,VCPU_ID , &sregs);compare_sregs (&sregs, &run->s.regs); +} + +void test_clear_kvm_dirty_regs_bits (struct kvm_vm *vm,struct kvm_run *run) +{ +int rv;/* Clear kvm_dirty_regs bits, verify new s.regs values are * overwritten with existing guest values. @@ -200,8 +207,46 @@ int main(int argc, char *argv[])TEST_ASSERT (run->s.regs.diag318 !=0x4B1D ,"diag318 sync regs value incorrect 0x%llx." , run->s.regs.diag318); +} + +struct testdef { +const char *name; +void (*test)(struct kvm_vm *vm,struct kvm_run *run); +} testlist[] = { + {"read invalid" , test_read_invalid }, + {"set invalid" , test_set_invalid }, + {"request+verify all valid regs" , test_req_and_verify_all_valid_regs }, + {"set+verify various regs" , test_set_and_verify_various_reg_values }, + {"clear kvm_dirty_regs bits" , test_clear_kvm_dirty_regs_bits }, +}; + +int main (int argc,char *argv[]) +{ +static struct kvm_run *run; +static struct kvm_vm *vm; +int idx; + +/* Tell stdout not to buffer its content */ +setbuf (stdout,NULL ); + +ksft_print_header (); + +if (!kvm_check_cap (KVM_CAP_SYNC_REGS )) +ksft_exit_skip ("CAP_SYNC_REGS not supported" ); + +ksft_set_plan (ARRAY_SIZE (testlist)); + +/* Create VM */ + vm =vm_create_default (VCPU_ID ,0 , guest_code); + + run =vcpu_state (vm,VCPU_ID ); + +for (idx =0 ; idx <ARRAY_SIZE (testlist); idx++) { + testlist[idx].test (vm, run); +ksft_test_result_pass ("%s\n" , testlist[idx].name); + }kvm_vm_free (vm); -return 0 ; +ksft_finished (); }
PATCH v2 3/4 KVM: s390: selftests: Use TAP interface in the tprot test
In reply to Thomas HuthThe tprot test currently does not have any output (unless one of the TEST_ASSERT statement fails), so it's hard to say for a user whether a certain new sub-test has been included in the binary or not. Let's make this a little bit more user-friendly and include some TAP output via the kselftests.h interface.
--- tools/testing/selftests/kvm/s390x/tprot.c | 28 +++++++++++++++++++---- 1 file changed, 23 insertions(+), 5 deletions(-)
tools/testing/selftests/kvm/s390x/tprot.c +23 -5
@@ -8,6 +8,7 @@#include <sys/mman.h> #include "test_util.h" #include "kvm_util.h" +#include "kselftest.h" #define PAGE_SHIFT 12#define PAGE_SIZE (1 << PAGE_SHIFT)
@@ -63,12 +64,12 @@ static enum permission test_protection(void *addr, uint8_t key) }enum stage { -STAGE_END ,STAGE_INIT_SIMPLE ,TEST_SIMPLE ,STAGE_INIT_FETCH_PROT_OVERRIDE ,TEST_FETCH_PROT_OVERRIDE ,TEST_STORAGE_PROT_OVERRIDE , +STAGE_END /* this must be the last entry */ };struct test {
@@ -182,7 +183,7 @@ static void guest_code(void)GUEST_SYNC (perform_next_stage (&i, mapped_0)); } -#define HOST_SYNC (vmp, stage) \ +#define HOST_SYNC_NO_TAP (vmp, stage) \ ({ \ struct kvm_vm *__vm = (vmp); \ struct ucall uc; \
@@ -198,12 +199,21 @@ static void guest_code(void)ASSERT_EQ (uc.args[1 ], __stage); \ }) +#define HOST_SYNC (vmp, stage) \ +{ \ + HOST_SYNC_NO_TAP(vmp, stage); \ + ksft_test_result_pass("" #stage "\n"); \ +} +int main (int argc,char *argv[]) {struct kvm_vm *vm;struct kvm_run *run;vm_vaddr_t guest_0_page; +ksft_print_header (); +ksft_set_plan (STAGE_END ); + vm =vm_create_default (VCPU_ID ,0 , guest_code); run =vcpu_state (vm,VCPU_ID );
@@ -212,9 +222,13 @@ int main(int argc, char *argv[])HOST_SYNC (vm,TEST_SIMPLE ); guest_0_page =vm_vaddr_alloc (vm,PAGE_SIZE ,0 ); -if (guest_0_page !=0 ) -print_skip ("Did not allocate page at 0 for fetch protection override tests" ); -HOST_SYNC (vm,STAGE_INIT_FETCH_PROT_OVERRIDE ); +if (guest_0_page !=0 ) { +HOST_SYNC_NO_TAP (vm,STAGE_INIT_FETCH_PROT_OVERRIDE ); +ksft_test_result_skip ("STAGE_INIT_FETCH_PROT_OVERRIDE - " +"Did not allocate page at 0\n" ); + }else { +HOST_SYNC (vm,STAGE_INIT_FETCH_PROT_OVERRIDE ); + }if (guest_0_page ==0 )mprotect (addr_gva2hva (vm, (vm_vaddr_t )0 ),PAGE_SIZE ,PROT_READ ); run->s.regs.crs[0 ] |=CR0_FETCH_PROTECTION_OVERRIDE ;
@@ -224,4 +238,8 @@ int main(int argc, char *argv[]) run->s.regs.crs[0 ] |=CR0_STORAGE_PROTECTION_OVERRIDE ; run->kvm_dirty_regs =KVM_SYNC_CRS ;HOST_SYNC (vm,TEST_STORAGE_PROT_OVERRIDE ); + +kvm_vm_free (vm); + +ksft_finished (); }
Signature · 1 line
2.27.0
Re: [PATCH v2 3/4] KVM: s390: selftests: Use TAP interface in the tprot test
Quoted 7 lines · Thomas Huth
The tprot test currently does not have any output (unless one of the
TEST_ASSERTstatement fails), so it's hard to say for a user whether a certain new sub-test has been included in the binary or not. Let's make this a little bit more user-friendly and include some TAP output via thekselftests.hinterface.Signed-off-by Thomas Huth <[email protected]>
Some comments below.
Quoted 17 lines
--- tools/testing/selftests/kvm/s390x/tprot.c | 28 +++++++++++++++++++---- 1 file changed, 23 insertions(+), 5 deletions(-)tools/testing/selftests/kvm/s390x/tprot.c +1
-0@@ -8,6 +8,7 @@#include <sys/mman.h> #include "test_util.h" #include "kvm_util.h" +#include "kselftest.h" #define PAGE_SHIFT 12#define PAGE_SIZE (1 << PAGE_SHIFT)
tools/testing/selftests/kvm/s390x/tprot.c static enum permission test_protection(void *addr, uint8_t key) · line 72
Quoted 10 lines
tools/testing/selftests/kvm/s390x/tprot.c +1
-1@@ -63,12 +64,12 @@ static enum permission test_protection(void *addr, uint8_t key) }enum stage { -STAGE_END ,STAGE_INIT_SIMPLE ,TEST_SIMPLE ,STAGE_INIT_FETCH_PROT_OVERRIDE ,TEST_FETCH_PROT_OVERRIDE ,TEST_STORAGE_PROT_OVERRIDE , +STAGE_END /* this must be the last entry */
...so we can use it to calculate the test number
Quoted 9 lines
tools/testing/selftests/kvm/s390x/tprot.c +0
-0};struct test {@@ -182,7 +183,7 @@ static void guest_code(void)GUEST_SYNC (perform_next_stage (&i, mapped_0)); }
tools/testing/selftests/kvm/s390x/tprot.c int main(int argc, char *argv[]) · line 225
Quoted 7 lines
tools/testing/selftests/kvm/s390x/tprot.c +1
-3@@ -212,9 +222,13 @@ int main(int argc, char *argv[])HOST_SYNC (vm,TEST_SIMPLE ); guest_0_page =vm_vaddr_alloc (vm,PAGE_SIZE ,0 ); -if (guest_0_page !=0 ) -print_skip ("Did not allocate page at 0 for fetch protection override tests" ); -HOST_SYNC (vm,STAGE_INIT_FETCH_PROT_OVERRIDE ); +if (guest_0_page !=0 ) {
Maybe add:
/* Use no_tap so we don't get a PASS print */
tools/testing/selftests/kvm/s390x/tprot.c int main(int argc, char *argv[]) · line 231
Quoted 6 lines
tools/testing/selftests/kvm/s390x/tprot.c +6
-0+HOST_SYNC_NO_TAP (vm,STAGE_INIT_FETCH_PROT_OVERRIDE ); +ksft_test_result_skip ("STAGE_INIT_FETCH_PROT_OVERRIDE - " +"Did not allocate page at 0\n" ); + }else { +HOST_SYNC (vm,STAGE_INIT_FETCH_PROT_OVERRIDE ); + }
Otherwise this would look weird.
Quoted 12 lines
tools/testing/selftests/kvm/s390x/tprot.c +4
-0if (guest_0_page ==0 )mprotect (addr_gva2hva (vm, (vm_vaddr_t )0 ),PAGE_SIZE ,PROT_READ ); run->s.regs.crs[0 ] |=CR0_FETCH_PROTECTION_OVERRIDE ;@@ -224,4 +238,8 @@ int main(int argc, char *argv[]) run->s.regs.crs[0 ] |=CR0_STORAGE_PROTECTION_OVERRIDE ; run->kvm_dirty_regs =KVM_SYNC_CRS ;HOST_SYNC (vm,TEST_STORAGE_PROT_OVERRIDE ); + +kvm_vm_free (vm); + +ksft_finished (); }
Re: [PATCH v2 3/4] KVM: s390: selftests: Use TAP interface in the tprot test
In reply to Thomas Huthtools/testing/selftests/kvm/s390x/tprot.c
Quoted 15 lines · Thomas Huth
The tprot test currently does not have any output (unless one of the
TEST_ASSERTstatement fails), so it's hard to say for a user whether a certain new sub-test has been included in the binary or not. Let's make this a little bit more user-friendly and include some TAP output via thekselftests.hinterface.Signed-off-by Thomas Huth <[email protected]>--- tools/testing/selftests/kvm/s390x/tprot.c | 28 +++++++++++++++++++---- 1 file changed, 23 insertions(+), 5 deletions(-)tools/testing/selftests/kvm/s390x/tprot.c +0
-0
We're not committing ourselves to any particular test output, are we? Your patch considers the stages used for test setup tests themselves, which I'm fine with, but would not want to commit to keeping that way forever.
[...]
tools/testing/selftests/kvm/s390x/tprot.c static void guest_code(void) · line 207
Quoted 6 lines
tools/testing/selftests/kvm/s390x/tprot.c +6
-0+#define HOST_SYNC (vmp, stage) \ +{ \ + HOST_SYNC_NO_TAP(vmp, stage); \ + ksft_test_result_pass("" #stage "\n"); \ +} +
It should not be a problem, but is there any reason you're not using do { ... } while(0) or ({ ... }) instead of just braces?
[...]
Re: [PATCH v2 3/4] KVM: s390: selftests: Use TAP interface in the tprot test
Quoted 12 lines · Janis Schoetterl-Glausch
Quoted 11 lines · Thomas Huth
The tprot test currently does not have any output (unless one of the
TEST_ASSERTstatement fails), so it's hard to say for a user whether a certain new sub-test has been included in the binary or not. Let's make this a little bit more user-friendly and include some TAP output via thekselftests.hinterface.Signed-off-by Thomas Huth <[email protected]>--- tools/testing/selftests/kvm/s390x/tprot.c | 28 +++++++++++++++++++---- 1 file changed, 23 insertions(+), 5 deletions(-)
Quoted 8 lines
tools/testing/selftests/kvm/s390x/tprot.c
Quoted 4 lines
tools/testing/selftests/kvm/s390x/tprot.c +0
-0We're not committing ourselves to any particular test output, are we? Your patch considers the stages used for test setup tests themselves, which I'm fine with, but would not want to commit to keeping that way forever.
No commitment - just somewhat more verbose output. If you don't like it, we can also drop this patch, or do it in another way, I don't mind too much.
Quoted 9 lines
tools/testing/selftests/kvm/s390x/tprot.c static void guest_code(void) · line 207
Quoted 6 lines
tools/testing/selftests/kvm/s390x/tprot.c +6
-0+#define HOST_SYNC (vmp, stage) \ +{ \ + HOST_SYNC_NO_TAP(vmp, stage); \ + ksft_test_result_pass("" #stage "\n"); \ +} +It should not be a problem, but is there any reason you're not using do { ... } while(0) or ({ ... }) instead of just braces?
Yes, that would be better, indeed.
Thomas
Janis Schoetterl-Glausch
Reviewed-byRe: [PATCH v2 3/4] KVM: s390: selftests: Use TAP interface in the tprot test
Quoted 22 lines · Thomas Huth
Quoted 12 lines · Janis Schoetterl-Glausch
Quoted 11 lines · Thomas Huth
The tprot test currently does not have any output (unless one of the
TEST_ASSERTstatement fails), so it's hard to say for a user whether a certain new sub-test has been included in the binary or not. Let's make this a little bit more user-friendly and include some TAP output via thekselftests.hinterface.Signed-off-by Thomas Huth <[email protected]>---
tools/testing/selftests/kvm/s390x/tprot.c| 28 +++++++++++++++++++----1 file changed, 23 insertions(+), 5 deletions(-)Quoted 8 lines
tools/testing/selftests/kvm/s390x/tprot.c
Quoted 4 lines
tools/testing/selftests/kvm/s390x/tprot.c +0
-0We're not committing ourselves to any particular test output, are we? Your patch considers the stages used for test setup tests themselves, which I'm fine with, but would not want to commit to keeping that way forever.
Quoted 1 line
No commitment - just somewhat more verbose output. If you don't like it, we can also drop this patch, or do it in another way, I don't mind too much.
I'm fine with it then.
With the braces changed:
Quoted 15 lines
Quoted 10 lines
tools/testing/selftests/kvm/s390x/tprot.c static void guest_code(void) · line 207
Quoted 7 lines
tools/testing/selftests/kvm/s390x/tprot.c +6
-0+#define HOST_SYNC (vmp, stage) \ +{ \ + HOST_SYNC_NO_TAP(vmp, stage); \ + ksft_test_result_pass("" #stage "\n"); \ +} +It should not be a problem, but is there any reason you're not using do { ... } while(0) or ({ ... }) instead of just braces?
Yes, that would be better, indeed.
Thomas
PATCH v2 4/4 KVM: s390: selftests: Use TAP interface in the reset test
In reply to Thomas HuthLet's standardize the s390x KVM selftest output to the TAP output generated via the kselftests.h interface.
--- tools/testing/selftests/kvm/s390x/resets.c | 38 +++++++++++++++++----- 1 file changed, 30 insertions(+), 8 deletions(-)
tools/testing/selftests/kvm/s390x/resets.c +30 -8
@@ -12,6 +12,7 @@#include "test_util.h" #include "kvm_util.h" +#include "kselftest.h" #define VCPU_ID 3#define LOCAL_IRQS 32
@@ -202,7 +203,7 @@ static void inject_irq(int cpu_id)static void test_normal (void ) { -pr_info ("Testing normal reset\n" ); +ksft_print_msg ("Testing normal reset\n" );/* Create VM */ vm =vm_create_default (VCPU_ID ,0 , guest_code_initial); run =vcpu_state (vm,VCPU_ID );
@@ -225,7 +226,7 @@ static void test_normal(void)static void test_initial (void ) { -pr_info ("Testing initial reset\n" ); +ksft_print_msg ("Testing initial reset\n" ); vm =vm_create_default (VCPU_ID ,0 , guest_code_initial); run =vcpu_state (vm,VCPU_ID ); sync_regs = &run->s.regs;
@@ -247,7 +248,7 @@ static void test_initial(void)static void test_clear (void ) { -pr_info ("Testing clear reset\n" ); +ksft_print_msg ("Testing clear reset\n" ); vm =vm_create_default (VCPU_ID ,0 , guest_code_initial); run =vcpu_state (vm,VCPU_ID ); sync_regs = &run->s.regs;
@@ -266,14 +267,35 @@ static void test_clear(void)kvm_vm_free (vm); } +struct testdef { +const char *name; +void (*test)(void ); +bool needs_cap; +} testlist[] = { + {"initial" , test_initial, false }, + {"normal" , test_normal, true }, + {"clear" , test_clear, true }, +}; +int main (int argc,char *argv[]) { +bool has_s390_vcpu_resets =kvm_check_cap (KVM_CAP_S390_VCPU_RESETS ); +int idx; +setbuf (stdout,NULL );/* Tell stdout not to buffer its content */ -test_initial (); -if (kvm_check_cap (KVM_CAP_S390_VCPU_RESETS )) { -test_normal (); -test_clear (); +ksft_print_header (); +ksft_set_plan (ARRAY_SIZE (testlist)); + +for (idx =0 ; idx <ARRAY_SIZE (testlist); idx++) { +if (!testlist[idx].needs_cap || has_s390_vcpu_resets) { + testlist[idx].test (); +ksft_test_result_pass ("%s\n" , testlist[idx].name); + }else { +ksft_test_result_skip ("%s - no VCPU_RESETS capability\n" , + testlist[idx].name); + } } -return 0 ; + +ksft_finished (); }
Signature · 1 line
2.27.0
Re: [PATCH v2 4/4] KVM: s390: selftests: Use TAP interface in the reset test
Quoted 5 lines · Thomas Huth
Let's standardize the s390x KVM selftest output to the TAP output generated via the
kselftests.hinterface.Signed-off-by Thomas Huth <[email protected]>---
[...]
tools/testing/selftests/kvm/s390x/resets.c static void test_clear(void) · line 300
Quoted 3 lines
tools/testing/selftests/kvm/s390x/resets.c +2
-1-return 0 ; + +ksft_finished ();
main() is still int so it looks really weird, that we remove the return here. After reading the ksft_finished() code I know that we never return because we do an exit() but I'd like to have a comment, change to void or noreturn tag to make this clearer.
I'd guess that's true for all 4 patches.
Quoted 1 line
}
Re: [PATCH v2 4/4] KVM: s390: selftests: Use TAP interface in the reset test
Quoted 7 lines · Janosch Frank
Quoted 5 lines · Thomas Huth
Let's standardize the s390x KVM selftest output to the TAP output generated via the
kselftests.hinterface.Signed-off-by Thomas Huth <[email protected]>---
Quoted 8 lines
Reviewed-by Janosch Frank <[email protected]>[...]
Quoted 3 lines
- return 0;
+
+ksft_finished();
main()is still int so it looks really weird, that we remove the return here. After reading theksft_finished()code I know that we never return because we do anexit()but I'd like to have a comment, change to void or noreturn tag to make this clearer.
Changing the return type of main() to void causes a compiler warning here, so I'll go with the comment.
Thomas