Skip to contentSkip to conversation

thermal: intel: intel_soc_dts_iosf: Cleanups, fixes and usage of generic trips

PATCH In review Rafael J. Wysocki 3 participants 10 messages Aug 10, 2023 – Aug 11, 2023 Thermal

lore
Share & tools
lore
#0 lore raw

cover thermal: intel: intel_soc_dts_iosf: Cleanups, fixes and usage of generic trips

Hi Folks,

This series is on top of the cleanups one posted yesterday:

https://lore.kernel.org/linux-pm/12271935.O9o76ZdvQC@kreacher/

It continues cleaning up the driver, fixes some potential issues related to the ordering of actions in it and finally makes it use thermal_zone_device_register_with_trips() for the registration of thermal zones.

Please refer to the individual patch changelogs for details.

Thanks!

#1 lore raw

PATCH 1/7 thermal: intel: intel_soc_dts_iosf: Always assume notification support

From: Rafael J. Wysocki <[email protected]>

None of the existing callers of intel_soc_dts_iosf_init() passes INTEL_SOC_DTS_INTERRUPT_NONE as the first argument to it, so the notification local variable in it is always true and the notification_support argument of add_dts_thermal_zone() is always true either.

For this reason, drop the notification local variable from intel_soc_dts_iosf_init() and the notification_support argument from add_dts_thermal_zone() and rearrange the latter to always set writable_trip_cnt and trip_mask.

No intentional functional impact.

---
 drivers/thermal/intel/intel_soc_dts_iosf.c |   21 ++++++++-------------
 1 file changed, 8 insertions(+), 13 deletions(-)
drivers/thermal/intel/intel_soc_dts_iosf.c +8 -13
Index: linux-pm/drivers/thermal/intel/intel_soc_dts_iosf.c
===================================================================
@@ -247,12 +247,12 @@ static void remove_dts_thermal_zone(stru
 }
 
 static int add_dts_thermal_zone(int id, struct intel_soc_dts_sensor_entry *dts,
-				bool notification_support, int read_only_trip_cnt)
+				int read_only_trip_cnt)
 {
 	char name[10];
 	unsigned long trip;
-	int trip_mask = 0;
-	int writable_trip_cnt = 0;
+	int writable_trip_cnt;
+	int trip_mask;
 	unsigned long ptps;
 	u32 store_ptps;
 	unsigned long i;
@@ -265,10 +265,9 @@ static int add_dts_thermal_zone(int id,
 		goto err_ret;
 
 	dts->id = id;
-	if (notification_support) {
-		writable_trip_cnt = SOC_MAX_DTS_TRIPS - read_only_trip_cnt;
-		trip_mask = GENMASK(writable_trip_cnt - 1, 0);
-	}
+
+	writable_trip_cnt = SOC_MAX_DTS_TRIPS - read_only_trip_cnt;
+	trip_mask = GENMASK(writable_trip_cnt - 1, 0);
 
 	/* Check if the writable trip we provide is not used by BIOS */
 	ret = iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ,
@@ -364,7 +363,6 @@ struct intel_soc_dts_sensors *intel_soc_
 	enum intel_soc_dts_interrupt_type intr_type, int read_only_trip_count)
 {
 	struct intel_soc_dts_sensors *sensors;
-	bool notification;
 	int tj_max;
 	int ret;
 	int i;
@@ -387,14 +385,11 @@ struct intel_soc_dts_sensors *intel_soc_
 	mutex_init(&sensors->dts_update_lock);
 	sensors->intr_type = intr_type;
 	sensors->tj_max = tj_max * 1000;
-	if (intr_type == INTEL_SOC_DTS_INTERRUPT_NONE)
-		notification = false;
-	else
-		notification = true;
+
 	for (i = 0; i < SOC_MAX_DTS_SENSORS; ++i) {
 		sensors->soc_dts[i].sensors = sensors;
 		ret = add_dts_thermal_zone(i, &sensors->soc_dts[i],
-					   notification, read_only_trip_count);
+					   read_only_trip_count);
 		if (ret)
 			goto err_free;
 	}
#2 lore raw

PATCH 2/7 thermal: intel: intel_soc_dts_iosf: Untangle update_trip_temp()

In reply to Rafael J. Wysocki

From: Rafael J. Wysocki <[email protected]>

Function update_trip_temp() is currently used for the initialization of trip points as well as for changing trip point temperatures in sys_set_trip_temp().

This is quite confusing and passing the value of dts->trip_types[trip] to it so that it can store that value in the same memory location is not particularly useful, because it only is necessary to set the trip point type once, at the initialization time.

For this reason, drop the last argument from update_trip_temp() and introduce configure_trip() calling the former internally for the initial configuration of trip points.

Modify the majority of update_trip_temp() callers to use configure_trip() instead of it.

---
 drivers/thermal/intel/intel_soc_dts_iosf.c |   37 ++++++++++++++++++-----------
 1 file changed, 24 insertions(+), 13 deletions(-)
drivers/thermal/intel/intel_soc_dts_iosf.c +24 -13
Index: linux-pm/drivers/thermal/intel/intel_soc_dts_iosf.c
===================================================================
@@ -67,8 +67,7 @@ static int sys_get_trip_temp(struct ther
 }
 
 static int update_trip_temp(struct intel_soc_dts_sensor_entry *dts,
-			    int thres_index, int temp,
-			    enum thermal_trip_type trip_type)
+			    int thres_index, int temp)
 {
 	int status;
 	u32 temp_out;
@@ -142,8 +141,6 @@ static int update_trip_temp(struct intel
 	if (status)
 		goto err_restore_te_out;
 
-	dts->trip_types[thres_index] = trip_type;
-
 	return 0;
 err_restore_te_out:
 	iosf_mbi_write(BT_MBI_UNIT_PMC, MBI_REG_WRITE,
@@ -159,6 +156,21 @@ err_restore_ptps:
 	return status;
 }
 
+static int configure_trip(struct intel_soc_dts_sensor_entry *dts,
+			  int thres_index, enum thermal_trip_type trip_type,
+			  int temp)
+{
+	int ret;
+
+	ret = update_trip_temp(dts, thres_index, temp);
+	if (ret)
+		return ret;
+
+	dts->trip_types[thres_index] = trip_type;
+
+	return 0;
+}
+
 static int sys_set_trip_temp(struct thermal_zone_device *tzd, int trip,
 			     int temp)
 {
@@ -170,8 +182,7 @@ static int sys_set_trip_temp(struct ther
 		return -EINVAL;
 
 	mutex_lock(&sensors->dts_update_lock);
-	status = update_trip_temp(dts, trip, temp,
-				  dts->trip_types[trip]);
+	status = update_trip_temp(dts, trip, temp);
 	mutex_unlock(&sensors->dts_update_lock);
 
 	return status;
@@ -317,7 +328,7 @@ int intel_soc_dts_iosf_add_read_only_cri
 
 		j = find_first_zero_bit(&mask, SOC_MAX_DTS_TRIPS);
 		if (j < SOC_MAX_DTS_TRIPS)
-			return update_trip_temp(entry, j, temp, THERMAL_TRIP_CRITICAL);
+			return configure_trip(entry, j, THERMAL_TRIP_CRITICAL, temp);
 	}
 
 	return -EINVAL;
@@ -395,13 +406,13 @@ struct intel_soc_dts_sensors *intel_soc_
 	}
 
 	for (i = 0; i < SOC_MAX_DTS_SENSORS; ++i) {
-		ret = update_trip_temp(&sensors->soc_dts[i], 0, 0,
-				       THERMAL_TRIP_PASSIVE);
+		ret = configure_trip(&sensors->soc_dts[i], 0,
+				     THERMAL_TRIP_PASSIVE, 0);
 		if (ret)
 			goto err_remove_zone;
 
-		ret = update_trip_temp(&sensors->soc_dts[i], 1, 0,
-				       THERMAL_TRIP_PASSIVE);
+		ret = configure_trip(&sensors->soc_dts[i], 1,
+				     THERMAL_TRIP_PASSIVE, 0);
 		if (ret)
 			goto err_remove_zone;
 	}
@@ -422,8 +433,8 @@ void intel_soc_dts_iosf_exit(struct inte
 	int i;
 
 	for (i = 0; i < SOC_MAX_DTS_SENSORS; ++i) {
-		update_trip_temp(&sensors->soc_dts[i], 0, 0, 0);
-		update_trip_temp(&sensors->soc_dts[i], 1, 0, 0);
+		configure_trip(&sensors->soc_dts[i], 0, 0, 0);
+		configure_trip(&sensors->soc_dts[i], 1, 0, 0);
 		remove_dts_thermal_zone(&sensors->soc_dts[i]);
 	}
 	kfree(sensors);
#3 lore raw

PATCH 3/7 thermal: intel: intel_soc_dts_iosf: Pass sensors to update_trip_temp()

In reply to Rafael J. Wysocki

From: Rafael J. Wysocki <[email protected]>

After previous changes, update_trip_temp() only uses its dts argument to get to the sensors field in the struct intel_soc_dts_sensor_entry object pointed to by that argument, so pass the value of that field directly to it instead.

No intentional functional impact.

---
 drivers/thermal/intel/intel_soc_dts_iosf.c |    7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)
drivers/thermal/intel/intel_soc_dts_iosf.c +3 -4
Index: linux-pm/drivers/thermal/intel/intel_soc_dts_iosf.c
===================================================================
@@ -66,7 +66,7 @@ static int sys_get_trip_temp(struct ther
 	return 0;
 }
 
-static int update_trip_temp(struct intel_soc_dts_sensor_entry *dts,
+static int update_trip_temp(struct intel_soc_dts_sensors *sensors,
 			    int thres_index, int temp)
 {
 	int status;
@@ -78,7 +78,6 @@ static int update_trip_temp(struct intel
 	u32 store_te_out;
 	u32 te_out;
 	u32 int_enable_bit = SOC_DTS_TE_APICA_ENABLE;
-	struct intel_soc_dts_sensors *sensors = dts->sensors;
 
 	if (sensors->intr_type == INTEL_SOC_DTS_INTERRUPT_MSI)
 		int_enable_bit |= SOC_DTS_TE_MSI_ENABLE;
@@ -162,7 +161,7 @@ static int configure_trip(struct intel_s
 {
 	int ret;
 
-	ret = update_trip_temp(dts, thres_index, temp);
+	ret = update_trip_temp(dts->sensors, thres_index, temp);
 	if (ret)
 		return ret;
 
@@ -182,7 +181,7 @@ static int sys_set_trip_temp(struct ther
 		return -EINVAL;
 
 	mutex_lock(&sensors->dts_update_lock);
-	status = update_trip_temp(dts, trip, temp);
+	status = update_trip_temp(sensors, trip, temp);
 	mutex_unlock(&sensors->dts_update_lock);
 
 	return status;
#4 lore raw

PATCH 4/7 thermal: intel: intel_soc_dts_iosf: Change initialization ordering

In reply to Rafael J. Wysocki

From: Rafael J. Wysocki <[email protected]>

The initial configuration of trip points in intel_soc_dts_iosf_init() takes place after registering the sensor thermal zones which is potentially problematic, because it may race with the setting of trip point temperatures via sysfs, as there is no synchronization between it and sys_set_trip_temp().

To address this, change the initialization ordering so that the trip points are configured prior to the registration of thermal zones.

Accordingly, change the cleanup ordering in intel_soc_dts_iosf_exit() to remove the thermal zones before resetting the trip points.

---
 drivers/thermal/intel/intel_soc_dts_iosf.c |   25 ++++++++++++++++---------
 1 file changed, 16 insertions(+), 9 deletions(-)
drivers/thermal/intel/intel_soc_dts_iosf.c +16 -9
Index: linux-pm/drivers/thermal/intel/intel_soc_dts_iosf.c
===================================================================
@@ -398,30 +398,37 @@ struct intel_soc_dts_sensors *intel_soc_
 
 	for (i = 0; i < SOC_MAX_DTS_SENSORS; ++i) {
 		sensors->soc_dts[i].sensors = sensors;
-		ret = add_dts_thermal_zone(i, &sensors->soc_dts[i],
-					   read_only_trip_count);
-		if (ret)
-			goto err_free;
-	}
 
-	for (i = 0; i < SOC_MAX_DTS_SENSORS; ++i) {
 		ret = configure_trip(&sensors->soc_dts[i], 0,
 				     THERMAL_TRIP_PASSIVE, 0);
 		if (ret)
-			goto err_remove_zone;
+			goto err_reset_trips;
 
 		ret = configure_trip(&sensors->soc_dts[i], 1,
 				     THERMAL_TRIP_PASSIVE, 0);
 		if (ret)
+			goto err_reset_trips;
+	}
+
+	for (i = 0; i < SOC_MAX_DTS_SENSORS; ++i) {
+		ret = add_dts_thermal_zone(i, &sensors->soc_dts[i],
+					   read_only_trip_count);
+		if (ret)
 			goto err_remove_zone;
 	}
 
 	return sensors;
+
 err_remove_zone:
 	for (i = 0; i < SOC_MAX_DTS_SENSORS; ++i)
 		remove_dts_thermal_zone(&sensors->soc_dts[i]);
 
-err_free:
+err_reset_trips:
+	for (i = 0; i < SOC_MAX_DTS_SENSORS; i++) {
+		configure_trip(&sensors->soc_dts[i], 0, 0, 0);
+		configure_trip(&sensors->soc_dts[i], 1, 0, 0);
+	}
+
 	kfree(sensors);
 	return ERR_PTR(ret);
 }
@@ -432,9 +439,9 @@ void intel_soc_dts_iosf_exit(struct inte
 	int i;
 
 	for (i = 0; i < SOC_MAX_DTS_SENSORS; ++i) {
+		remove_dts_thermal_zone(&sensors->soc_dts[i]);
 		configure_trip(&sensors->soc_dts[i], 0, 0, 0);
 		configure_trip(&sensors->soc_dts[i], 1, 0, 0);
-		remove_dts_thermal_zone(&sensors->soc_dts[i]);
 	}
 	kfree(sensors);
 }
#5 lore raw

PATCH 5/7 thermal: intel: intel_soc_dts_iosf: Add helper for resetting trip points

In reply to Rafael J. Wysocki

From: Rafael J. Wysocki <[email protected]>

Because trip points are reset for each sensor in two places in the same way, add a helper function for that to reduce code duplication a bit.

No intentional functional impact.

---
 drivers/thermal/intel/intel_soc_dts_iosf.c |   15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)
drivers/thermal/intel/intel_soc_dts_iosf.c +9 -6
Index: linux-pm/drivers/thermal/intel/intel_soc_dts_iosf.c
===================================================================
@@ -369,6 +369,12 @@ void intel_soc_dts_iosf_interrupt_handle
 }
 EXPORT_SYMBOL_GPL(intel_soc_dts_iosf_interrupt_handler);
 
+static void dts_trips_reset(struct intel_soc_dts_sensors *sensors, int dts_index)
+{
+	configure_trip(&sensors->soc_dts[dts_index], 0, 0, 0);
+	configure_trip(&sensors->soc_dts[dts_index], 1, 0, 0);
+}
+
 struct intel_soc_dts_sensors *intel_soc_dts_iosf_init(
 	enum intel_soc_dts_interrupt_type intr_type, int read_only_trip_count)
 {
@@ -424,10 +430,8 @@ err_remove_zone:
 		remove_dts_thermal_zone(&sensors->soc_dts[i]);
 
 err_reset_trips:
-	for (i = 0; i < SOC_MAX_DTS_SENSORS; i++) {
-		configure_trip(&sensors->soc_dts[i], 0, 0, 0);
-		configure_trip(&sensors->soc_dts[i], 1, 0, 0);
-	}
+	for (i = 0; i < SOC_MAX_DTS_SENSORS; i++)
+		dts_trips_reset(sensors, i);
 
 	kfree(sensors);
 	return ERR_PTR(ret);
@@ -440,8 +444,7 @@ void intel_soc_dts_iosf_exit(struct inte
 
 	for (i = 0; i < SOC_MAX_DTS_SENSORS; ++i) {
 		remove_dts_thermal_zone(&sensors->soc_dts[i]);
-		configure_trip(&sensors->soc_dts[i], 0, 0, 0);
-		configure_trip(&sensors->soc_dts[i], 1, 0, 0);
+		dts_trips_reset(sensors, i);
 	}
 	kfree(sensors);
 }
#6 lore raw

PATCH 6/7 thermal: intel: intel_soc_dts_iosf: Rework critical trip setup

In reply to Rafael J. Wysocki

From: Rafael J. Wysocki <[email protected]>

Critical trip points appear in the DTS thermal zones only after those thermal zones have been registered via intel_soc_dts_iosf_init(). Moreover, they are "created" by changing the type of an existing trip point from THERMAL_TRIP_PASSIVE to THERMAL_TRIP_CRITICAL via intel_soc_dts_iosf_add_read_only_critical_trip(), the caller of which has to be careful enough to pass at least 1 as the number of read-only trip points to intel_soc_dts_iosf_init() beforehand.

This is questionable, because user space may have started to use the trips at the time when intel_soc_dts_iosf_add_read_only_critical_trip() runs and there is no synchronization between it and sys_set_trip_temp().

To address it, use the observation that nonzero number of read-only trip points is only passed to intel_soc_dts_iosf_init() when critical trip points are going to be used, so in fact that function may get all of the information regarding the critical trip points upfront and it can configure them before registering the corresponding thermal zones.

Accordingly, replace the read_only_trip_count argument of intel_soc_dts_iosf_init() with a pair of new arguments related to critical trip points: a bool one indicating whether or not critical trip points are to be used at all and an int one representing the critical trip point temperature offset relative to Tj_max. Use these arguments to configure the critical trip points before the registration of the thermal zones and to compute the number of writeable trip points in add_dts_thermal_zone().

Modify both callers of intel_soc_dts_iosf_init() to take these changes into account and drop the intel_soc_dts_iosf_add_read_only_critical_trip() call, that is not necessary any more, from intel_soc_thermal_init(), which also allows it to return success right after requesting the IRQ.

Finally, drop intel_soc_dts_iosf_add_read_only_critical_trip() altogether, because it does not have any more users.

---
 drivers/thermal/intel/int340x_thermal/processor_thermal_device_pci_legacy.c |    2 
 drivers/thermal/intel/intel_soc_dts_iosf.c                                  |   51 +++-------
 drivers/thermal/intel/intel_soc_dts_iosf.h                                  |    8 -
 drivers/thermal/intel/intel_soc_dts_thermal.c                               |   17 ---
 4 files changed, 27 insertions(+), 51 deletions(-)
drivers/thermal/intel/intel_soc_dts_iosf.c +20 -31
Index: linux-pm/drivers/thermal/intel/intel_soc_dts_iosf.c
===================================================================
@@ -257,11 +257,11 @@ static void remove_dts_thermal_zone(stru
 }
 
 static int add_dts_thermal_zone(int id, struct intel_soc_dts_sensor_entry *dts,
-				int read_only_trip_cnt)
+				bool critical_trip)
 {
+	int writable_trip_cnt = SOC_MAX_DTS_TRIPS;
 	char name[10];
 	unsigned long trip;
-	int writable_trip_cnt;
 	int trip_mask;
 	unsigned long ptps;
 	u32 store_ptps;
@@ -276,7 +276,9 @@ static int add_dts_thermal_zone(int id,
 
 	dts->id = id;
 
-	writable_trip_cnt = SOC_MAX_DTS_TRIPS - read_only_trip_cnt;
+	if (critical_trip)
+		writable_trip_cnt--;
+
 	trip_mask = GENMASK(writable_trip_cnt - 1, 0);
 
 	/* Check if the writable trip we provide is not used by BIOS */
@@ -315,25 +317,6 @@ err_ret:
 	return ret;
 }
 
-int intel_soc_dts_iosf_add_read_only_critical_trip(
-	struct intel_soc_dts_sensors *sensors, int critical_offset)
-{
-	int i, j;
-
-	for (i = 0; i < SOC_MAX_DTS_SENSORS; ++i) {
-		struct intel_soc_dts_sensor_entry *entry = &sensors->soc_dts[i];
-		int temp = sensors->tj_max - critical_offset;
-		unsigned long mask = entry->trip_mask;
-
-		j = find_first_zero_bit(&mask, SOC_MAX_DTS_TRIPS);
-		if (j < SOC_MAX_DTS_TRIPS)
-			return configure_trip(entry, j, THERMAL_TRIP_CRITICAL, temp);
-	}
-
-	return -EINVAL;
-}
-EXPORT_SYMBOL_GPL(intel_soc_dts_iosf_add_read_only_critical_trip);
-
 void intel_soc_dts_iosf_interrupt_handler(struct intel_soc_dts_sensors *sensors)
 {
 	u32 sticky_out;
@@ -375,8 +358,9 @@ static void dts_trips_reset(struct intel
 	configure_trip(&sensors->soc_dts[dts_index], 1, 0, 0);
 }
 
-struct intel_soc_dts_sensors *intel_soc_dts_iosf_init(
-	enum intel_soc_dts_interrupt_type intr_type, int read_only_trip_count)
+struct intel_soc_dts_sensors *
+intel_soc_dts_iosf_init(enum intel_soc_dts_interrupt_type intr_type,
+			bool critical_trip, int crit_offset)
 {
 	struct intel_soc_dts_sensors *sensors;
 	int tj_max;
@@ -386,9 +370,6 @@ struct intel_soc_dts_sensors *intel_soc_
 	if (!iosf_mbi_available())
 		return ERR_PTR(-ENODEV);
 
-	if (read_only_trip_count > SOC_MAX_DTS_TRIPS)
-		return ERR_PTR(-EINVAL);
-
 	tj_max = intel_tcc_get_tjmax(-1);
 	if (tj_max < 0)
 		return ERR_PTR(tj_max);
@@ -403,6 +384,9 @@ struct intel_soc_dts_sensors *intel_soc_
 	sensors->tj_max = tj_max * 1000;
 
 	for (i = 0; i < SOC_MAX_DTS_SENSORS; ++i) {
+		enum thermal_trip_type trip_type;
+		int temp;
+
 		sensors->soc_dts[i].sensors = sensors;
 
 		ret = configure_trip(&sensors->soc_dts[i], 0,
@@ -410,15 +394,20 @@ struct intel_soc_dts_sensors *intel_soc_
 		if (ret)
 			goto err_reset_trips;
 
-		ret = configure_trip(&sensors->soc_dts[i], 1,
-				     THERMAL_TRIP_PASSIVE, 0);
+		if (critical_trip) {
+			trip_type = THERMAL_TRIP_CRITICAL;
+			temp = sensors->tj_max - crit_offset;
+		} else {
+			trip_type = THERMAL_TRIP_PASSIVE;
+			temp = 0;
+		}
+		ret = configure_trip(&sensors->soc_dts[i], 1, trip_type, temp);
 		if (ret)
 			goto err_reset_trips;
 	}
 
 	for (i = 0; i < SOC_MAX_DTS_SENSORS; ++i) {
-		ret = add_dts_thermal_zone(i, &sensors->soc_dts[i],
-					   read_only_trip_count);
+		ret = add_dts_thermal_zone(i, &sensors->soc_dts[i], critical_trip);
 		if (ret)
 			goto err_remove_zone;
 	}
drivers/thermal/intel/intel_soc_dts_iosf.h +4 -4
Index: linux-pm/drivers/thermal/intel/intel_soc_dts_iosf.h
===================================================================
@@ -42,11 +42,11 @@ struct intel_soc_dts_sensors {
 	struct intel_soc_dts_sensor_entry soc_dts[SOC_MAX_DTS_SENSORS];
 };
 
-struct intel_soc_dts_sensors *intel_soc_dts_iosf_init(
-	enum intel_soc_dts_interrupt_type intr_type, int read_only_trip_count);
+
+struct intel_soc_dts_sensors *
+intel_soc_dts_iosf_init(enum intel_soc_dts_interrupt_type intr_type,
+			bool critical_trip, int crit_offset);
 void intel_soc_dts_iosf_exit(struct intel_soc_dts_sensors *sensors);
 void intel_soc_dts_iosf_interrupt_handler(
 				struct intel_soc_dts_sensors *sensors);
-int intel_soc_dts_iosf_add_read_only_critical_trip(
-	struct intel_soc_dts_sensors *sensors, int critical_offset);
 #endif
drivers/thermal/intel/int340x_thermal/processor_thermal_device_pci_legacy.c +1 -1
Index: linux-pm/drivers/thermal/intel/int340x_thermal/processor_thermal_device_pci_legacy.c
===================================================================
@@ -59,7 +59,7 @@ static int proc_thermal_pci_probe(struct
 		 * ACPI/MSR. So we don't want to fail for auxiliary DTSs.
 		 */
 		proc_priv->soc_dts = intel_soc_dts_iosf_init(
-					INTEL_SOC_DTS_INTERRUPT_MSI, 0);
+					INTEL_SOC_DTS_INTERRUPT_MSI, false, 0);
 
 		if (!IS_ERR(proc_priv->soc_dts) && pdev->irq) {
 			ret = pci_enable_msi(pdev);
drivers/thermal/intel/intel_soc_dts_thermal.c +2 -15
Index: linux-pm/drivers/thermal/intel/intel_soc_dts_thermal.c
===================================================================
@@ -51,7 +51,8 @@ static int __init intel_soc_thermal_init
 		return -ENODEV;
 
 	/* Create a zone with 2 trips with marked as read only */
-	soc_dts = intel_soc_dts_iosf_init(INTEL_SOC_DTS_INTERRUPT_APIC, 1);
+	soc_dts = intel_soc_dts_iosf_init(INTEL_SOC_DTS_INTERRUPT_APIC, true,
+					  crit_offset);
 	if (IS_ERR(soc_dts)) {
 		err = PTR_ERR(soc_dts);
 		return err;
@@ -88,21 +89,7 @@ static int __init intel_soc_thermal_init
 		}
 	}
 
-	err = intel_soc_dts_iosf_add_read_only_critical_trip(soc_dts,
-							     crit_offset);
-	if (err)
-		goto error_trips;
-
 	return 0;
-
-error_trips:
-	if (soc_dts_thres_irq) {
-		free_irq(soc_dts_thres_irq, soc_dts);
-		acpi_unregister_gsi(soc_dts_thres_gsi);
-	}
-	intel_soc_dts_iosf_exit(soc_dts);
-
-	return err;
 }
 
 static void __exit intel_soc_thermal_exit(void)
#7 lore raw

PATCH 7/7 thermal: intel: intel_soc_dts_iosf: Use struct thermal_trip

In reply to Rafael J. Wysocki

From: Rafael J. Wysocki <[email protected]>

Because the number of trip points in each thermal zone and their types are known to intel_soc_dts_iosf_init() prior to the registration of the thermal zones, make it create an array of struct thermal_trip entries in each struct intel_soc_dts_sensor_entry object and make add_dts_thermal_zone() use thermal_zone_device_register_with_trips() for thermal zone registration and pass that array as its second argument.

Drop the sys_get_trip_temp() and sys_get_trip_type() callback functions along with the respective callback pointers in tzone_ops, because they are not necessary any more.

---
 drivers/thermal/intel/intel_soc_dts_iosf.c |   51 +++--------------------------
 drivers/thermal/intel/intel_soc_dts_iosf.h |    2 -
 2 files changed, 8 insertions(+), 45 deletions(-)
drivers/thermal/intel/intel_soc_dts_iosf.h +1 -1
Index: linux-pm/drivers/thermal/intel/intel_soc_dts_iosf.h
===================================================================
@@ -29,7 +29,7 @@ struct intel_soc_dts_sensor_entry {
 	int id;
 	u32 store_status;
 	u32 trip_mask;
-	enum thermal_trip_type trip_types[SOC_MAX_DTS_TRIPS];
+	struct thermal_trip trips[SOC_MAX_DTS_TRIPS];
 	struct thermal_zone_device *tzone;
 	struct intel_soc_dts_sensors *sensors;
 };
drivers/thermal/intel/intel_soc_dts_iosf.c +7 -44

81 lines not on this page · raw message

Reviewed-by on the v1 series
#8 lore raw
In reply to Rafael J. Wysocki
Quoted 4 lines · Rafael J. Wysocki

Hi Folks,

This series is on top of the cleanups one posted yesterday:

Quoted 9 lines

https://lore.kernel.org/linux-pm/12271935.O9o76ZdvQC@kreacher/

It continues cleaning up the driver, fixes some potential issues related to the ordering of actions in it and finally makes it use thermal_zone_device_register_with_trips() for the registration of thermal zones.

Please refer to the individual patch changelogs for details.

Quoted 4 lines

Thanks!

reviewer
#9 lore raw
In reply to Rafael J. Wysocki

Hi, Rafael,

the patches look good to me.
Just found one more thing to fix when checking the code. Will post a patch on top soon.

thanks,
rui

Quoted 17 lines · Rafael J. Wysocki

Hi Folks,

This series is on top of the cleanups one posted yesterday:

https://lore.kernel.org/linux-pm/12271935.O9o76ZdvQC@kreacher/

It continues cleaning up the driver, fixes some potential issues related to the ordering of actions in it and finally makes it use thermal_zone_device_register_with_trips() for the registration of thermal zones.

Please refer to the individual patch changelogs for details.

Thanks!