Improvements for TC358768 DSI bridge driver
cover Improvements for TC358768 DSI bridge driver
This series adds couple improvements to the TC358768 DSI bridge driver, enabling Panasonic VVX10F004B00 DSI panel support. This panel is used by ASUS Transformer TF700T tablet, which is ready for upstream kernel and display panel support is the biggest missing part.
Dmitry Osipenko (5):
drm/bridge: tc358768: Enable reference clock drm/bridge: tc358768: Support pulse mode drm/bridge: tc358768: Calculate video start delay drm/bridge: tc358768: Disable non-continuous clock mode drm/bridge: tc358768: Correct BTACNTRL1 programming
drivers/gpu/drm/bridge/tc358768.c | 94 +++++++++++++++++++++++-------- 1 file changed, 71 insertions(+), 23 deletions(-)
Signature · 1 line
2.32.0
PATCH 1/5 drm/bridge: tc358768: Enable reference clock
The driver assumes that reference clock is always-enabled, but this is hardware-dependent and not true for ASUS Transformer TF700T. Make driver enable / disable the reference clock.
--- drivers/gpu/drm/bridge/tc358768.c | 6 ++++++ 1 file changed, 6 insertions(+)
drivers/gpu/drm/bridge/tc358768.c +6 -0
@@ -237,6 +237,10 @@ static void tc358768_hw_enable(struct tc358768_priv *priv)if (priv->enabled)return ; + ret =clk_prepare_enable (priv->refclk); +if (ret <0 ) +dev_err (priv->dev,"error enabling refclk (%d)\n" , ret); + ret =regulator_bulk_enable (ARRAY_SIZE (priv->supplies), priv->supplies);if (ret <0 )dev_err (priv->dev,"error enabling regulators (%d)\n" , ret);
@@ -274,6 +278,8 @@ static void tc358768_hw_disable(struct tc358768_priv *priv)if (ret <0 )dev_err (priv->dev,"error disabling regulators (%d)\n" , ret); +clk_disable_unprepare (priv->refclk); + priv->enabled = false; }
Signature · 1 line
2.32.0
Re: [PATCH v1 1/5] drm/bridge: tc358768: Enable reference clock
Hey Dmitry,
Thanks for submitting this series.
Quoted 28 lines · Dmitry Osipenko
The driver assumes that reference clock is always-enabled, but this is hardware-dependent and not true for ASUS Transformer TF700T. Make driver enable / disable the reference clock.
Signed-off-by Dmitry Osipenko <[email protected]>--- drivers/gpu/drm/bridge/tc358768.c | 6 ++++++ 1 file changed, 6 insertions(+)drivers/gpu/drm/bridge/tc358768.c +4
-0@@ -237,6 +237,10 @@ static void tc358768_hw_enable(struct tc358768_priv *priv)if (priv->enabled)return ; + ret =clk_prepare_enable (priv->refclk); +if (ret <0 ) +dev_err (priv->dev,"error enabling refclk (%d)\n" , ret); + ret =regulator_bulk_enable (ARRAY_SIZE (priv->supplies), priv->supplies);if (ret <0 )dev_err (priv->dev,"error enabling regulators (%d)\n" , ret);
drivers/gpu/drm/bridge/tc358768.c static void tc358768_hw_disable(struct tc358768_priv *priv) · line 285
Quoted 8 lines
drivers/gpu/drm/bridge/tc358768.c +2
-0@@ -274,6 +278,8 @@ static void tc358768_hw_disable(struct tc358768_priv *priv)if (ret <0 )dev_err (priv->dev,"error disabling regulators (%d)\n" , ret); +clk_disable_unprepare (priv->refclk); + priv->enabled = false; }
PATCH 2/5 drm/bridge: tc358768: Support pulse mode
In reply to Dmitry OsipenkoSupport pulse-mode synchronization which is supported and used by simple DSI panels like Panasonic VVX10F004B00.
--- drivers/gpu/drm/bridge/tc358768.c | 66 ++++++++++++++++++++++--------- 1 file changed, 48 insertions(+), 18 deletions(-)
drivers/gpu/drm/bridge/tc358768.c +48 -18
@@ -785,24 +785,54 @@ static void tc358768_bridge_pre_enable(struct drm_bridge *bridge)/* START[0] */ tc358768_write (priv,TC358768_STARTCNTRL ,1 ); -/* Set event mode */ -tc358768_write (priv,TC358768_DSI_EVENT ,1 ); - -/* vsw (+ vbp) */ -tc358768_write (priv,TC358768_DSI_VSW , - mode->vtotal - mode->vsync_start); -/* vbp (not used in event mode) */ -tc358768_write (priv,TC358768_DSI_VBPR ,0 ); -/* vact */ -tc358768_write (priv,TC358768_DSI_VACT , mode->vdisplay); - -/* (hsw + hbp) * byteclk * ndl / pclk */ - val = (u32 )div_u64 ((mode->htotal - mode->hsync_start) * - ((u64 )priv->dsiclk /4 ) * priv->dsi_lanes, - mode->clock *1000 ); -tc358768_write (priv,TC358768_DSI_HSW , val); -/* hbp (not used in event mode) */ -tc358768_write (priv,TC358768_DSI_HBPR ,0 ); +if (dsi_dev->mode_flags &MIPI_DSI_MODE_VIDEO_SYNC_PULSE ) { +/* Set pulse mode */ +tc358768_write (priv,TC358768_DSI_EVENT ,0 ); + +/* vact */ +tc358768_write (priv,TC358768_DSI_VACT , mode->vdisplay); + +/* vsw */ +tc358768_write (priv,TC358768_DSI_VSW , + mode->vsync_end - mode->vsync_start); +/* vbp */ +tc358768_write (priv,TC358768_DSI_VBPR , + mode->vtotal - mode->vsync_end); + +/* hsw * byteclk * ndl / pclk */ + val = (u32 )div_u64 ((mode->hsync_end - mode->hsync_start) * + ((u64 )priv->dsiclk /4 ) * priv->dsi_lanes, + mode->clock *1000 ); +tc358768_write (priv,TC358768_DSI_HSW , val); + +/* hbp * byteclk * ndl / pclk */ + val = (u32 )div_u64 ((mode->htotal - mode->hsync_end) * + ((u64 )priv->dsiclk /4 ) * priv->dsi_lanes, + mode->clock *1000 ); +tc358768_write (priv,TC358768_DSI_HBPR , val); + }else { +/* Set event mode */ +tc358768_write (priv,TC358768_DSI_EVENT ,1 ); + +/* vact */ +tc358768_write (priv,TC358768_DSI_VACT , mode->vdisplay); + +/* vsw (+ vbp) */ +tc358768_write (priv,TC358768_DSI_VSW , + mode->vtotal - mode->vsync_start); +/* vbp (not used in event mode) */ +tc358768_write (priv,TC358768_DSI_VBPR ,0 ); + +/* (hsw + hbp) * byteclk * ndl / pclk */ + val = (u32 )div_u64 ((mode->htotal - mode->hsync_start) * + ((u64 )priv->dsiclk /4 ) * priv->dsi_lanes, + mode->clock *1000 ); +tc358768_write (priv,TC358768_DSI_HSW , val); + +/* hbp (not used in event mode) */ +tc358768_write (priv,TC358768_DSI_HBPR ,0 ); + } +/* hact (bytes) */ tc358768_write (priv,TC358768_DSI_HACT , hact);
Signature · 1 line
2.32.0
Re: [PATCH v1 2/5] drm/bridge: tc358768: Support pulse mode
Quoted 78 lines · Dmitry Osipenko
Support pulse-mode synchronization which is supported and used by simple DSI panels like Panasonic VVX10F004B00.
Signed-off-by Dmitry Osipenko <[email protected]>--- drivers/gpu/drm/bridge/tc358768.c | 66 ++++++++++++++++++++++--------- 1 file changed, 48 insertions(+), 18 deletions(-)drivers/gpu/drm/bridge/tc358768.c +41
-18@@ -785,24 +785,54 @@ static void tc358768_bridge_pre_enable(struct drm_bridge *bridge)/* START[0] */ tc358768_write (priv,TC358768_STARTCNTRL ,1 ); -/* Set event mode */ -tc358768_write (priv,TC358768_DSI_EVENT ,1 ); - -/* vsw (+ vbp) */ -tc358768_write (priv,TC358768_DSI_VSW , - mode->vtotal - mode->vsync_start); -/* vbp (not used in event mode) */ -tc358768_write (priv,TC358768_DSI_VBPR ,0 ); -/* vact */ -tc358768_write (priv,TC358768_DSI_VACT , mode->vdisplay); - -/* (hsw + hbp) * byteclk * ndl / pclk */ - val = (u32 )div_u64 ((mode->htotal - mode->hsync_start) * - ((u64 )priv->dsiclk /4 ) * priv->dsi_lanes, - mode->clock *1000 ); -tc358768_write (priv,TC358768_DSI_HSW , val); -/* hbp (not used in event mode) */ -tc358768_write (priv,TC358768_DSI_HBPR ,0 ); +if (dsi_dev->mode_flags &MIPI_DSI_MODE_VIDEO_SYNC_PULSE ) { +/* Set pulse mode */ +tc358768_write (priv,TC358768_DSI_EVENT ,0 ); + +/* vact */ +tc358768_write (priv,TC358768_DSI_VACT , mode->vdisplay); + +/* vsw */ +tc358768_write (priv,TC358768_DSI_VSW , + mode->vsync_end - mode->vsync_start); +/* vbp */ +tc358768_write (priv,TC358768_DSI_VBPR , + mode->vtotal - mode->vsync_end); + +/* hsw * byteclk * ndl / pclk */ + val = (u32 )div_u64 ((mode->hsync_end - mode->hsync_start) * + ((u64 )priv->dsiclk /4 ) * priv->dsi_lanes, + mode->clock *1000 ); +tc358768_write (priv,TC358768_DSI_HSW , val); + +/* hbp * byteclk * ndl / pclk */ + val = (u32 )div_u64 ((mode->htotal - mode->hsync_end) * + ((u64 )priv->dsiclk /4 ) * priv->dsi_lanes, + mode->clock *1000 ); +tc358768_write (priv,TC358768_DSI_HBPR , val); + }else { +/* Set event mode */ +tc358768_write (priv,TC358768_DSI_EVENT ,1 ); + +/* vact */ +tc358768_write (priv,TC358768_DSI_VACT , mode->vdisplay); + +/* vsw (+ vbp) */ +tc358768_write (priv,TC358768_DSI_VSW , + mode->vtotal - mode->vsync_start); +/* vbp (not used in event mode) */ +tc358768_write (priv,TC358768_DSI_VBPR ,0 ); + +/* (hsw + hbp) * byteclk * ndl / pclk */ + val = (u32)div_u64((mode->htotal - mode->hsync_start) * + ((u64)priv->dsiclk / 4) * priv->dsi_lanes,
drivers/gpu/drm/bridge/tc358768.c static void tc358768_bridge_pre_enable(struct drm_bridge *bridge) · line 838
Quoted 10 lines
drivers/gpu/drm/bridge/tc358768.c +7
-0+ mode->clock * 1000); +tc358768_write (priv,TC358768_DSI_HSW , val); + +/* hbp (not used in event mode) */ +tc358768_write (priv,TC358768_DSI_HBPR ,0 ); + } +/* hact (bytes) */ tc358768_write (priv,TC358768_DSI_HACT , hact);
PATCH 3/5 drm/bridge: tc358768: Calculate video start delay
In reply to Dmitry OsipenkoCalculate video start delay based on the display timing instead of hardcoding it to a default value. This fixes "trembling" display output on Asus Transformer TF700T which uses Panasonic VVX10F004B00 display panel.
--- drivers/gpu/drm/bridge/tc358768.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
drivers/gpu/drm/bridge/tc358768.c +8 -2
@@ -634,7 +634,8 @@ static void tc358768_bridge_pre_enable(struct drm_bridge *bridge)u32 val, val2, lptxcnt, hact, data_type;const struct drm_display_mode *mode;u32 dsibclk_nsk, dsiclk_nsk, ui_nsk, phy_delay_nsk; -u32 dsiclk, dsibclk; +u32 dsiclk, dsibclk, video_start; +const u32 internal_delay =40 ;int ret, i;tc358768_hw_enable (priv);
@@ -663,23 +664,27 @@ static void tc358768_bridge_pre_enable(struct drm_bridge *bridge)case MIPI_DSI_FMT_RGB888 : val |= (0x3 <<4 ); hact = mode->hdisplay *3 ; + video_start = (mode->htotal - mode->hsync_start) *3 ; data_type =MIPI_DSI_PACKED_PIXEL_STREAM_24 ;break ;case MIPI_DSI_FMT_RGB666 : val |= (0x4 <<4 ); hact = mode->hdisplay *3 ; + video_start = (mode->htotal - mode->hsync_start) *3 ; data_type =MIPI_DSI_PACKED_PIXEL_STREAM_18 ;break ;case MIPI_DSI_FMT_RGB666_PACKED : val |= (0x4 <<4 ) |BIT (3 ); hact = mode->hdisplay *18 /8 ; + video_start = (mode->htotal - mode->hsync_start) *18 /8 ; data_type =MIPI_DSI_PIXEL_STREAM_3BYTE_18 ;break ;case MIPI_DSI_FMT_RGB565 : val |= (0x5 <<4 ); hact = mode->hdisplay *2 ; + video_start = (mode->htotal - mode->hsync_start) *2 ; data_type =MIPI_DSI_PACKED_PIXEL_STREAM_16 ;break ;default :
@@ -690,7 +695,8 @@ static void tc358768_bridge_pre_enable(struct drm_bridge *bridge) }/* VSDly[9:0] */ -tc358768_write (priv,TC358768_VSDLY ,1 ); + video_start =max (video_start, internal_delay +1 ) - internal_delay; +tc358768_write (priv,TC358768_VSDLY , video_start);tc358768_write (priv,TC358768_DATAFMT , val);tc358768_write (priv,TC358768_DSITX_DT , data_type);
Signature · 1 line
2.32.0
Re: [PATCH v1 3/5] drm/bridge: tc358768: Calculate video start delay
Quoted 66 lines · Dmitry Osipenko
Calculate video start delay based on the display timing instead of hardcoding it to a default value. This fixes "trembling" display output on Asus Transformer TF700T which uses Panasonic VVX10F004B00 display panel.
Signed-off-by Dmitry Osipenko <[email protected]>--- drivers/gpu/drm/bridge/tc358768.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)drivers/gpu/drm/bridge/tc358768.c +8
-3@@ -634,7 +634,8 @@ static void tc358768_bridge_pre_enable(struct drm_bridge *bridge)u32 val, val2, lptxcnt, hact, data_type;const struct drm_display_mode *mode;u32 dsibclk_nsk, dsiclk_nsk, ui_nsk, phy_delay_nsk; -u32 dsiclk, dsibclk; +u32 dsiclk, dsibclk, video_start; +const u32 internal_delay =40 ;int ret, i;tc358768_hw_enable (priv);@@ -663,23 +664,27 @@ static void tc358768_bridge_pre_enable(struct drm_bridge *bridge)case MIPI_DSI_FMT_RGB888 : val |= (0x3 <<4 ); hact = mode->hdisplay *3 ; + video_start = (mode->htotal - mode->hsync_start) *3 ; data_type =MIPI_DSI_PACKED_PIXEL_STREAM_24 ;break ;case MIPI_DSI_FMT_RGB666 : val |= (0x4 <<4 ); hact = mode->hdisplay *3 ; + video_start = (mode->htotal - mode->hsync_start) *3 ; data_type =MIPI_DSI_PACKED_PIXEL_STREAM_18 ;break ;case MIPI_DSI_FMT_RGB666_PACKED : val |= (0x4 <<4 ) |BIT (3 ); hact = mode->hdisplay *18 /8 ; + video_start = (mode->htotal - mode->hsync_start) *18 /8 ; data_type =MIPI_DSI_PIXEL_STREAM_3BYTE_18 ;break ;case MIPI_DSI_FMT_RGB565 : val |= (0x5 <<4 ); hact = mode->hdisplay *2 ; + video_start = (mode->htotal - mode->hsync_start) *2 ; data_type =MIPI_DSI_PACKED_PIXEL_STREAM_16 ;break ;default :@@ -690,7 +695,8 @@ static void tc358768_bridge_pre_enable(struct drm_bridge *bridge) }/* VSDly[9:0] */ -tc358768_write (priv,TC358768_VSDLY ,1 ); + video_start =max (video_start, internal_delay +1 ) - internal_delay; +tc358768_write (priv,TC358768_VSDLY , video_start);tc358768_write (priv,TC358768_DATAFMT , val);tc358768_write (priv,TC358768_DSITX_DT , data_type); --
Quoted 2 lines
2.32.0
PATCH 4/5 drm/bridge: tc358768: Disable non-continuous clock mode
In reply to Dmitry OsipenkoNon-continuous clock mode doesn't work because driver doesn't support it properly. The bridge driver programs wrong bitfields that are required by the non-continuous mode (BTACNTRL1 register bitfields are swapped in the code), but fixing them doesn't help.
Display panel of ASUS Transformer TF700T tablet supports non-continuous mode and display doesn't work at all using that mode. There are no device-trees that are actively using this DSI bridge in upstream yet, so clearly the broken mode wasn't ever tested properly. It's a bit too difficult to get LP mode working, hence let's disable the offending mode for now and fall back to continuous mode.
--- drivers/gpu/drm/bridge/tc358768.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
drivers/gpu/drm/bridge/tc358768.c +8 -2
@@ -631,6 +631,7 @@ static void tc358768_bridge_pre_enable(struct drm_bridge *bridge) {struct tc358768_priv *priv =bridge_to_tc358768 (bridge);struct mipi_dsi_device *dsi_dev = priv->output.dev; +unsigned long mode_flags = dsi_dev->mode_flags;u32 val, val2, lptxcnt, hact, data_type;const struct drm_display_mode *mode;u32 dsibclk_nsk, dsiclk_nsk, ui_nsk, phy_delay_nsk;
@@ -638,6 +639,11 @@ static void tc358768_bridge_pre_enable(struct drm_bridge *bridge)const u32 internal_delay =40 ;int ret, i; +if (mode_flags &MIPI_DSI_CLOCK_NON_CONTINUOUS ) { +dev_warn_once (priv->dev,"Non-continuous mode unimplemented, falling back to continuous\n" ); + mode_flags &= ~MIPI_DSI_CLOCK_NON_CONTINUOUS ; + } +tc358768_hw_enable (priv); ret =tc358768_sw_reset (priv);
@@ -776,7 +782,7 @@ static void tc358768_bridge_pre_enable(struct drm_bridge *bridge) val |=BIT (i +1 );tc358768_write (priv,TC358768_HSTXVREGEN , val); -if (!(dsi_dev->mode_flags &MIPI_DSI_CLOCK_NON_CONTINUOUS )) +if (!(mode_flags &MIPI_DSI_CLOCK_NON_CONTINUOUS ))tc358768_write (priv,TC358768_TXOPTIONCNTRL ,0x1 );/* TXTAGOCNT[26:16] RXTASURECNT[10:0] */
@@ -864,7 +870,7 @@ static void tc358768_bridge_pre_enable(struct drm_bridge *bridge)if (!(dsi_dev->mode_flags &MIPI_DSI_MODE_LPM )) val |=TC358768_DSI_CONTROL_TXMD ; -if (!(dsi_dev->mode_flags &MIPI_DSI_CLOCK_NON_CONTINUOUS )) +if (!(mode_flags &MIPI_DSI_CLOCK_NON_CONTINUOUS )) val |=TC358768_DSI_CONTROL_HSCKMD ;if (dsi_dev->mode_flags &MIPI_DSI_MODE_NO_EOT_PACKET )
Signature · 1 line
2.32.0
Re: [PATCH v1 4/5] drm/bridge: tc358768: Disable non-continuous clock mode
Quoted 54 lines · Dmitry Osipenko
Non-continuous clock mode doesn't work because driver doesn't support it properly. The bridge driver programs wrong bitfields that are required by the non-continuous mode (BTACNTRL1 register bitfields are swapped in the code), but fixing them doesn't help.
Display panel of ASUS Transformer TF700T tablet supports non-continuous mode and display doesn't work at all using that mode. There are no device-trees that are actively using this DSI bridge in upstream yet, so clearly the broken mode wasn't ever tested properly. It's a bit too difficult to get LP mode working, hence let's disable the offending mode for now and fall back to continuous mode.
Signed-off-by Dmitry Osipenko <[email protected]>--- drivers/gpu/drm/bridge/tc358768.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)drivers/gpu/drm/bridge/tc358768.c +7
-1@@ -631,6 +631,7 @@ static void tc358768_bridge_pre_enable(struct drm_bridge *bridge) {struct tc358768_priv *priv =bridge_to_tc358768 (bridge);struct mipi_dsi_device *dsi_dev = priv->output.dev; +unsigned long mode_flags = dsi_dev->mode_flags;u32 val, val2, lptxcnt, hact, data_type;const struct drm_display_mode *mode;u32 dsibclk_nsk, dsiclk_nsk, ui_nsk, phy_delay_nsk;@@ -638,6 +639,11 @@ static void tc358768_bridge_pre_enable(struct drm_bridge *bridge)const u32 internal_delay =40 ;int ret, i; +if (mode_flags &MIPI_DSI_CLOCK_NON_CONTINUOUS ) { +dev_warn_once (priv->dev,"Non-continuous mode unimplemented, falling back to continuous\n" ); + mode_flags &= ~MIPI_DSI_CLOCK_NON_CONTINUOUS ; + } +tc358768_hw_enable (priv); ret =tc358768_sw_reset (priv);@@ -776,7 +782,7 @@ static void tc358768_bridge_pre_enable(struct drm_bridge *bridge) val |=BIT (i +1 );tc358768_write (priv,TC358768_HSTXVREGEN , val); -if (!(dsi_dev->mode_flags &MIPI_DSI_CLOCK_NON_CONTINUOUS )) +if (!(mode_flags &MIPI_DSI_CLOCK_NON_CONTINUOUS ))tc358768_write (priv,TC358768_TXOPTIONCNTRL ,0x1 );/* TXTAGOCNT[26:16] RXTASURECNT[10:0] */
drivers/gpu/drm/bridge/tc358768.c static void tc358768_bridge_pre_enable(struct drm_bridge *bridge)
Quoted 9 lines
drivers/gpu/drm/bridge/tc358768.c +1
-2@@ -864,7 +870,7 @@ static void tc358768_bridge_pre_enable(struct drm_bridge *bridge)if (!(dsi_dev->mode_flags &MIPI_DSI_MODE_LPM )) val |=TC358768_DSI_CONTROL_TXMD ; -if (!(dsi_dev->mode_flags &MIPI_DSI_CLOCK_NON_CONTINUOUS )) +if (!(mode_flags &MIPI_DSI_CLOCK_NON_CONTINUOUS )) val |=TC358768_DSI_CONTROL_HSCKMD ;if (dsi_dev->mode_flags &MIPI_DSI_MODE_NO_EOT_PACKET ) --
PATCH 5/5 drm/bridge: tc358768: Correct BTACNTRL1 programming
In reply to Dmitry OsipenkoTXTAGOCNT and RXTASURECNT bitfields of BTACNTRL1 register are swapped in the code, correct them. Driver doesn't implement low power mode for now, so this change doesn't make a practical difference yet.
--- drivers/gpu/drm/bridge/tc358768.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/bridge/tc358768.c +1 -1
@@ -790,7 +790,7 @@ static void tc358768_bridge_pre_enable(struct drm_bridge *bridge) val =tc358768_ns_to_cnt (val, dsibclk_nsk) -1 ; val2 =tc358768_ns_to_cnt (tc358768_to_ns ((lptxcnt +1 ) * dsibclk_nsk), dsibclk_nsk) -2 ; - val |= val2 <<16 ; + val = val <<16 | val2;dev_dbg (priv->dev,"BTACNTRL1: 0x%x\n" , val);tc358768_write (priv,TC358768_BTACNTRL1 , val);
Signature · 1 line
2.32.0
Re: [PATCH v1 5/5] drm/bridge: tc358768: Correct BTACNTRL1 programming
Quoted 17 lines · Dmitry Osipenko
TXTAGOCNT and RXTASURECNT bitfields of BTACNTRL1 register are swapped in the code, correct them. Driver doesn't implement low power mode for now, so this change doesn't make a practical difference yet.
Signed-off-by Dmitry Osipenko <[email protected]>--- drivers/gpu/drm/bridge/tc358768.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)drivers/gpu/drm/bridge/tc358768.c +0
-0
drivers/gpu/drm/bridge/tc358768.c static void tc358768_bridge_pre_enable(struct drm_bridge *bridge) · line 796
Quoted 8 lines
drivers/gpu/drm/bridge/tc358768.c +1
-1@@ -790,7 +790,7 @@ static void tc358768_bridge_pre_enable(struct drm_bridge *bridge) val =tc358768_ns_to_cnt (val, dsibclk_nsk) -1 ; val2 =tc358768_ns_to_cnt (tc358768_to_ns ((lptxcnt +1 ) * dsibclk_nsk), dsibclk_nsk) -2 ; - val |= val2 <<16 ; + val = val <<16 | val2;dev_dbg (priv->dev,"BTACNTRL1: 0x%x\n" , val);tc358768_write (priv,TC358768_BTACNTRL1 , val);
Robert Foss
AppliedApplied to drm-misc-next
Quoted 19 lines · Dmitry Osipenko
This series adds couple improvements to the TC358768 DSI bridge driver, enabling Panasonic VVX10F004B00 DSI panel support. This panel is used by ASUS Transformer TF700T tablet, which is ready for upstream kernel and display panel support is the biggest missing part.
Dmitry Osipenko (5):
drm/bridge: tc358768: Enable reference clock drm/bridge: tc358768: Support pulse mode drm/bridge: tc358768: Calculate video start delay drm/bridge: tc358768: Disable non-continuous clock mode drm/bridge: tc358768: Correct BTACNTRL1 programmingdrivers/gpu/drm/bridge/tc358768.c | 94 +++++++++++++++++++++++-------- 1 file changed, 71 insertions(+), 23 deletions(-)--
2.32.0
19.10.2021 12:47, Robert Foss пишет:
Quoted 22 lines
Applied to drm-misc-next
Quoted 19 lines · Dmitry Osipenko
This series adds couple improvements to the TC358768 DSI bridge driver, enabling Panasonic VVX10F004B00 DSI panel support. This panel is used by ASUS Transformer TF700T tablet, which is ready for upstream kernel and display panel support is the biggest missing part.
Dmitry Osipenko (5):
drm/bridge: tc358768: Enable reference clock drm/bridge: tc358768: Support pulse mode drm/bridge: tc358768: Calculate video start delay drm/bridge: tc358768: Disable non-continuous clock mode drm/bridge: tc358768: Correct BTACNTRL1 programmingdrivers/gpu/drm/bridge/tc358768.c | 94 +++++++++++++++++++++++-------- 1 file changed, 71 insertions(+), 23 deletions(-)--
2.32.0
Robert, thank you for taking care of these patches! Now nothing is holding us from upstreaming the device-tree of the Transformer tablet.
19.10.2021 23:37, Dmitry Osipenko пишет:
Quoted 20 lines
19.10.2021 12:47, Robert Foss пишет:
Quoted 19 lines
Applied to drm-misc-next
Quoted 16 lines · Dmitry Osipenko
This series adds couple improvements to the TC358768 DSI bridge driver, enabling Panasonic VVX10F004B00 DSI panel support. This panel is used by ASUS Transformer TF700T tablet, which is ready for upstream kernel and display panel support is the biggest missing part.
Dmitry Osipenko (5):
drm/bridge: tc358768: Enable reference clock drm/bridge: tc358768: Support pulse mode drm/bridge: tc358768: Calculate video start delay drm/bridge: tc358768: Disable non-continuous clock mode drm/bridge: tc358768: Correct BTACNTRL1 programmingdrivers/gpu/drm/bridge/tc358768.c | 94 +++++++++++++++++++++++-------- 1 file changed, 71 insertions(+), 23 deletions(-)
Quoted 7 lines
Quoted 3 lines
Quoted 3 lines
--
2.32.0Robert, thank you for taking care of these patches! Now nothing is holding us from upstreaming the device-tree of the Transformer tablet.
Hello Robert,
These patches spent 2 months in drm-misc-next, will they graduate into v5.17 or something special needs to be done for that?
Hey Dmitry,
Quoted 26 lines · Dmitry Osipenko
19.10.2021 23:37, Dmitry Osipenko пишет:
Quoted 24 lines
19.10.2021 12:47, Robert Foss пишет:
Quoted 22 lines
Applied to drm-misc-next
Quoted 19 lines · Dmitry Osipenko
This series adds couple improvements to the TC358768 DSI bridge driver, enabling Panasonic VVX10F004B00 DSI panel support. This panel is used by ASUS Transformer TF700T tablet, which is ready for upstream kernel and display panel support is the biggest missing part.
Dmitry Osipenko (5):
drm/bridge: tc358768: Enable reference clock drm/bridge: tc358768: Support pulse mode drm/bridge: tc358768: Calculate video start delay drm/bridge: tc358768: Disable non-continuous clock mode drm/bridge: tc358768: Correct BTACNTRL1 programmingdrivers/gpu/drm/bridge/tc358768.c | 94 +++++++++++++++++++++++-------- 1 file changed, 71 insertions(+), 23 deletions(-)--
2.32.0
Quoted 8 lines
Quoted 3 lines
Robert, thank you for taking care of these patches! Now nothing is holding us from upstreaming the device-tree of the Transformer tablet.
Hello Robert,
These patches spent 2 months in drm-misc-next, will they graduate into v5.17 or something special needs to be done for that?
They series has landed in linux-next, and will be in v5.17 if nothing catastrophic happens.
Rob.
21.12.2021 21:10, Robert Foss пишет:
Quoted 33 lines
Hey Dmitry,
Quoted 30 lines · Dmitry Osipenko
19.10.2021 23:37, Dmitry Osipenko пишет:
Quoted 27 lines
19.10.2021 12:47, Robert Foss пишет:
Quoted 22 lines
Applied to drm-misc-next
Quoted 19 lines · Dmitry Osipenko
This series adds couple improvements to the TC358768 DSI bridge driver, enabling Panasonic VVX10F004B00 DSI panel support. This panel is used by ASUS Transformer TF700T tablet, which is ready for upstream kernel and display panel support is the biggest missing part.
Dmitry Osipenko (5):
drm/bridge: tc358768: Enable reference clock drm/bridge: tc358768: Support pulse mode drm/bridge: tc358768: Calculate video start delay drm/bridge: tc358768: Disable non-continuous clock mode drm/bridge: tc358768: Correct BTACNTRL1 programmingdrivers/gpu/drm/bridge/tc358768.c | 94 +++++++++++++++++++++++-------- 1 file changed, 71 insertions(+), 23 deletions(-)--
2.32.0Robert, thank you for taking care of these patches! Now nothing is holding us from upstreaming the device-tree of the Transformer tablet.
Quoted 7 lines
Quoted 4 lines
Hello Robert,
These patches spent 2 months in drm-misc-next, will they graduate into v5.17 or something special needs to be done for that?
They series has landed in linux-next, and will be in v5.17 if nothing catastrophic happens.
Very good to know, thank you!