Skip to contentSkip to conversation

i2c: s3c2410: move mach/regs-iic.h into i2c-s3c2410 device driver

PATCH Superseded Heiko Stübner 3 participants 8 messages Feb 7, 2013 – Mar 21, 2013

Subsystems (4)

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/2 i2c: s3c2410: move mach/regs-iic.h into i2c-s3c2410 device driver

The register definitions are only used in the driver itself. This also removes the last dependency on plat/ includes from the i2c driver.

---
 arch/arm/mach-s3c24xx/mach-rx1950.c           |    1 -
 arch/arm/plat-samsung/devs.c                  |    1 -
 arch/arm/plat-samsung/include/plat/regs-iic.h |   56 -------------------------
 drivers/i2c/busses/i2c-s3c2410.c              |   41 ++++++++++++++++++-
 4 files changed, 40 insertions(+), 59 deletions(-)
 delete mode 100644 arch/arm/plat-samsung/include/plat/regs-iic.h
arch/arm/mach-s3c24xx/mach-rx1950.c +0 -1
index 799af43..64b52a9 100644
@@ -56,7 +56,6 @@
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/pm.h>
-#include <plat/regs-iic.h>
 #include <plat/regs-serial.h>
 #include <plat/samsung-time.h>
 
arch/arm/plat-samsung/devs.c +0 -1
index e1124d9..6317a9e 100644
@@ -62,7 +62,6 @@
 #include <linux/platform_data/usb-s3c2410_udc.h>
 #include <linux/platform_data/usb-ohci-s3c2410.h>
 #include <plat/usb-phy.h>
-#include <plat/regs-iic.h>
 #include <plat/regs-serial.h>
 #include <plat/regs-spi.h>
 #include <linux/platform_data/spi-s3c64xx.h>
arch/arm/plat-samsung/include/plat/regs-iic.h deleted +0 -56

56 lines not on this page · raw message

drivers/i2c/busses/i2c-s3c2410.c +40 -1

49 lines not on this page · raw message

Signature · 1 line
1.7.2.3
#1 lore raw

PATCH 2/2 i2c: s3c2410: fixup the styling of the newly moved register definitions

Make them conform more to established standards.

---
 drivers/i2c/busses/i2c-s3c2410.c |   50 ++++++++++++++++++-------------------
 1 files changed, 24 insertions(+), 26 deletions(-)
drivers/i2c/busses/i2c-s3c2410.c +25 -27
index 5cc4f71..5ef5c3d 100644
@@ -46,35 +46,33 @@
 
 /* see s3c2410x user guide, v1.1, section 9 (p447) for more info */
 
-#define S3C2410_IICREG(x) (x)
-
-#define S3C2410_IICCON    S3C2410_IICREG(0x00)
-#define S3C2410_IICSTAT   S3C2410_IICREG(0x04)
-#define S3C2410_IICADD    S3C2410_IICREG(0x08)
-#define S3C2410_IICDS     S3C2410_IICREG(0x0C)
-#define S3C2440_IICLC	  S3C2410_IICREG(0x10)
-
-#define S3C2410_IICCON_ACKEN		(1<<7)
-#define S3C2410_IICCON_TXDIV_16		(0<<6)
-#define S3C2410_IICCON_TXDIV_512	(1<<6)
-#define S3C2410_IICCON_IRQEN		(1<<5)
-#define S3C2410_IICCON_IRQPEND		(1<<4)
-#define S3C2410_IICCON_SCALE(x)		((x)&15)
+#define S3C2410_IICCON			0x00
+#define S3C2410_IICSTAT			0x04
+#define S3C2410_IICADD			0x08
+#define S3C2410_IICDS			0x0C
+#define S3C2440_IICLC			0x10
+
+#define S3C2410_IICCON_ACKEN		(1 << 7)
+#define S3C2410_IICCON_TXDIV_16		(0 << 6)
+#define S3C2410_IICCON_TXDIV_512	(1 << 6)
+#define S3C2410_IICCON_IRQEN		(1 << 5)
+#define S3C2410_IICCON_IRQPEND		(1 << 4)
+#define S3C2410_IICCON_SCALE(x)		((x) & 0xf)
 #define S3C2410_IICCON_SCALEMASK	(0xf)
 
-#define S3C2410_IICSTAT_MASTER_RX	(2<<6)
-#define S3C2410_IICSTAT_MASTER_TX	(3<<6)
-#define S3C2410_IICSTAT_SLAVE_RX	(0<<6)
-#define S3C2410_IICSTAT_SLAVE_TX	(1<<6)
-#define S3C2410_IICSTAT_MODEMASK	(3<<6)
+#define S3C2410_IICSTAT_MASTER_RX	(2 << 6)
+#define S3C2410_IICSTAT_MASTER_TX	(3 << 6)
+#define S3C2410_IICSTAT_SLAVE_RX	(0 << 6)
+#define S3C2410_IICSTAT_SLAVE_TX	(1 << 6)
+#define S3C2410_IICSTAT_MODEMASK	(3 << 6)
 
-#define S3C2410_IICSTAT_START		(1<<5)
-#define S3C2410_IICSTAT_BUSBUSY		(1<<5)
-#define S3C2410_IICSTAT_TXRXEN		(1<<4)
-#define S3C2410_IICSTAT_ARBITR		(1<<3)
-#define S3C2410_IICSTAT_ASSLAVE		(1<<2)
-#define S3C2410_IICSTAT_ADDR0		(1<<1)
-#define S3C2410_IICSTAT_LASTBIT		(1<<0)
+#define S3C2410_IICSTAT_START		(1 << 5)
+#define S3C2410_IICSTAT_BUSBUSY		(1 << 5)
+#define S3C2410_IICSTAT_TXRXEN		(1 << 4)
+#define S3C2410_IICSTAT_ARBITR		(1 << 3)
+#define S3C2410_IICSTAT_ASSLAVE		(1 << 2)
+#define S3C2410_IICSTAT_ADDR0		(1 << 1)
+#define S3C2410_IICSTAT_LASTBIT		(1 << 0)
 
 #define S3C2410_IICLC_SDA_DELAY0	(0 << 0)
 #define S3C2410_IICLC_SDA_DELAY5	(1 << 0)
@@ -82,7 +80,7 @@
 #define S3C2410_IICLC_SDA_DELAY15	(3 << 0)
 #define S3C2410_IICLC_SDA_DELAY_MASK	(3 << 0)
 
-#define S3C2410_IICLC_FILTER_ON		(1<<2)
+#define S3C2410_IICLC_FILTER_ON		(1 << 2)
 
 /* Treat S3C2410 as baseline hardware, anything else is supported via quirks */
 #define QUIRK_S3C2440		(1 << 0)
Signature · 1 line
1.7.2.3
#2 lore raw

PATCH 1/2 i2c: s3c2410: move mach/regs-iic.h into i2c-s3c2410 device driver

In reply to Heiko Stübner
Quoted 157 lines · Heiko St?bner

The register definitions are only used in the driver itself. This also removes the last dependency on plat/ includes from the i2c driver.

---
 arch/arm/mach-s3c24xx/mach-rx1950.c           |    1 -
 arch/arm/plat-samsung/devs.c                  |    1 -
 arch/arm/plat-samsung/include/plat/regs-iic.h |   56 -------------------------
 drivers/i2c/busses/i2c-s3c2410.c              |   41 ++++++++++++++++++-
 4 files changed, 40 insertions(+), 59 deletions(-)
 delete mode 100644 arch/arm/plat-samsung/include/plat/regs-iic.h
arch/arm/mach- renamed from arch/arm/mach-s3c24xx/mach-rx1950.c +0 -0

s3c24xx/mach-rx1950.c
index 799af43..64b52a9 100644

arch/arm/mach-s3c24xx/mach-rx1950.c +0 -1
@@ -56,7 +56,6 @@
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/pm.h>
-#include <plat/regs-iic.h>
 #include <plat/regs-serial.h>
 #include <plat/samsung-time.h>
 
arch/arm/plat-samsung/devs.c +0 -1
index e1124d9..6317a9e 100644
@@ -62,7 +62,6 @@
 #include <linux/platform_data/usb-s3c2410_udc.h>
 #include <linux/platform_data/usb-ohci-s3c2410.h>
 #include <plat/usb-phy.h>
-#include <plat/regs-iic.h>
 #include <plat/regs-serial.h>
 #include <plat/regs-spi.h>
 #include <linux/platform_data/spi-s3c64xx.h>
arch/arm/plat- renamed from arch/arm/plat-samsung/include/plat/regs-iic.h +0 -0

samsung/include/plat/regs-iic.h
deleted file mode 100644
index 2f7c17d..0000000

arch/arm/plat-samsung/include/plat/regs-iic.h deleted +0 -56
@@ -1,56 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-iic.h
- *
- * Copyright (c) 2004 Simtec Electronics <[email protected]>
- *		http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 I2C Controller
-*/
-
-#ifndef __ASM_ARCH_REGS_IIC_H
-#define __ASM_ARCH_REGS_IIC_H __FILE__
-
-/* see s3c2410x user guide, v1.1, section 9 (p447) for more info */
-
-#define S3C2410_IICREG(x) (x)
-
-#define S3C2410_IICCON    S3C2410_IICREG(0x00)
-#define S3C2410_IICSTAT   S3C2410_IICREG(0x04)
-#define S3C2410_IICADD    S3C2410_IICREG(0x08)
-#define S3C2410_IICDS     S3C2410_IICREG(0x0C)
-#define S3C2440_IICLC	  S3C2410_IICREG(0x10)
-
-#define S3C2410_IICCON_ACKEN		(1<<7)
-#define S3C2410_IICCON_TXDIV_16		(0<<6)
-#define S3C2410_IICCON_TXDIV_512	(1<<6)
-#define S3C2410_IICCON_IRQEN		(1<<5)
-#define S3C2410_IICCON_IRQPEND		(1<<4)
-#define S3C2410_IICCON_SCALE(x)		((x)&15)
-#define S3C2410_IICCON_SCALEMASK	(0xf)
-
-#define S3C2410_IICSTAT_MASTER_RX	(2<<6)
-#define S3C2410_IICSTAT_MASTER_TX	(3<<6)
-#define S3C2410_IICSTAT_SLAVE_RX	(0<<6)
-#define S3C2410_IICSTAT_SLAVE_TX	(1<<6)
-#define S3C2410_IICSTAT_MODEMASK	(3<<6)
-
-#define S3C2410_IICSTAT_START		(1<<5)
-#define S3C2410_IICSTAT_BUSBUSY		(1<<5)
-#define S3C2410_IICSTAT_TXRXEN		(1<<4)
-#define S3C2410_IICSTAT_ARBITR		(1<<3)
-#define S3C2410_IICSTAT_ASSLAVE		(1<<2)
-#define S3C2410_IICSTAT_ADDR0		(1<<1)
-#define S3C2410_IICSTAT_LASTBIT		(1<<0)
-
-#define S3C2410_IICLC_SDA_DELAY0	(0 << 0)
-#define S3C2410_IICLC_SDA_DELAY5	(1 << 0)
-#define S3C2410_IICLC_SDA_DELAY10	(2 << 0)
-#define S3C2410_IICLC_SDA_DELAY15	(3 << 0)
-#define S3C2410_IICLC_SDA_DELAY_MASK	(3 << 0)
-
-#define S3C2410_IICLC_FILTER_ON		(1<<2)
-
-#endif /* __ASM_ARCH_REGS_IIC_H */
drivers/i2c/busses/i2c- renamed from drivers/i2c/busses/i2c-s3c2410.c +0 -0

s3c2410.c
index a290d08..5cc4f71 100644

drivers/i2c/busses/i2c-s3c2410.c +40 -1
@@ -42,9 +42,48 @@
 
 #include <asm/irq.h>
 
-#include <plat/regs-iic.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 
+/* see s3c2410x user guide, v1.1, section 9 (p447) for more info */
+
+#define S3C2410_IICREG(x) (x)
+
+#define S3C2410_IICCON    S3C2410_IICREG(0x00)
+#define S3C2410_IICSTAT   S3C2410_IICREG(0x04)
+#define S3C2410_IICADD    S3C2410_IICREG(0x08)
+#define S3C2410_IICDS     S3C2410_IICREG(0x0C)
+#define S3C2440_IICLC	  S3C2410_IICREG(0x10)
+
+#define S3C2410_IICCON_ACKEN		(1<<7)
+#define S3C2410_IICCON_TXDIV_16		(0<<6)
+#define S3C2410_IICCON_TXDIV_512	(1<<6)
+#define S3C2410_IICCON_IRQEN		(1<<5)
+#define S3C2410_IICCON_IRQPEND		(1<<4)
+#define S3C2410_IICCON_SCALE(x)		((x)&15)
+#define S3C2410_IICCON_SCALEMASK	(0xf)
+
+#define S3C2410_IICSTAT_MASTER_RX	(2<<6)
+#define S3C2410_IICSTAT_MASTER_TX	(3<<6)
+#define S3C2410_IICSTAT_SLAVE_RX	(0<<6)
+#define S3C2410_IICSTAT_SLAVE_TX	(1<<6)
+#define S3C2410_IICSTAT_MODEMASK	(3<<6)
+
+#define S3C2410_IICSTAT_START		(1<<5)
+#define S3C2410_IICSTAT_BUSBUSY		(1<<5)
+#define S3C2410_IICSTAT_TXRXEN		(1<<4)
+#define S3C2410_IICSTAT_ARBITR		(1<<3)
+#define S3C2410_IICSTAT_ASSLAVE		(1<<2)
+#define S3C2410_IICSTAT_ADDR0		(1<<1)
+#define S3C2410_IICSTAT_LASTBIT		(1<<0)
+
+#define S3C2410_IICLC_SDA_DELAY0	(0 << 0)
+#define S3C2410_IICLC_SDA_DELAY5	(1 << 0)
+#define S3C2410_IICLC_SDA_DELAY10	(2 << 0)
+#define S3C2410_IICLC_SDA_DELAY15	(3 << 0)
+#define S3C2410_IICLC_SDA_DELAY_MASK	(3 << 0)
+
+#define S3C2410_IICLC_FILTER_ON		(1<<2)
+
 /* Treat S3C2410 as baseline hardware, anything else is supported via quirks
 */
 #define QUIRK_S3C2440		(1 << 0)
Quoted 3 lines

#define QUIRK_HDMIPHY (1 << 1)
--
1.7.2.3

Looks good to me on this series:

Hi Wolfram, if you're ok on this, please pick up into your tree with my ack.

Thanks.

- Kukjin

#3 lore raw

PATCH 1/2 i2c: s3c2410: move mach/regs-iic.h into i2c-s3c2410 device driver

Hi Kukjin,

(please don't quote the whole patch for those few lines)

Quoted 4 lines

Looks good to me on this series:

Hi Wolfram, if you're ok on this, please pick up into your tree with my ack.

Will do, but not for 3.9 anymore. Thanks!

#4 lore raw

PATCH 1/2 i2c: s3c2410: move mach/regs-iic.h into i2c-s3c2410 device driver

In reply to Heiko Stübner
Quoted 162 lines · Kukjin Kim
Quoted 153 lines · Heiko St?bner

The register definitions are only used in the driver itself. This also removes the last dependency on plat/ includes from the i2c driver.

---
 arch/arm/mach-s3c24xx/mach-rx1950.c           |    1 -
 arch/arm/plat-samsung/devs.c                  |    1 -
 arch/arm/plat-samsung/include/plat/regs-iic.h |   56 -------------------------
 drivers/i2c/busses/i2c-s3c2410.c              |   41 ++++++++++++++++++-
 4 files changed, 40 insertions(+), 59 deletions(-)  delete mode

100644 arch/arm/plat-samsung/include/plat/regs-iic.h

arch/arm/mach- renamed from arch/arm/mach-s3c24xx/mach-rx1950.c +0 -0

s3c24xx/mach-rx1950.c index 799af43..64b52a9 100644

arch/arm/mach-s3c24xx/mach-rx1950.c +0 -1
@@ -56,7 +56,6 @@
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/pm.h>
-#include <plat/regs-iic.h>
 #include <plat/regs-serial.h>
 #include <plat/samsung-time.h>
 
(quoted diff) +0 -0

b/arch/arm/plat-samsung/devs.c index e1124d9..6317a9e 100644

arch/arm/plat-samsung/devs.c +0 -1
@@ -62,7 +62,6 @@
 #include <linux/platform_data/usb-s3c2410_udc.h>
 #include <linux/platform_data/usb-ohci-s3c2410.h>
 #include <plat/usb-phy.h>
-#include <plat/regs-iic.h>
 #include <plat/regs-serial.h>
 #include <plat/regs-spi.h>
 #include <linux/platform_data/spi-s3c64xx.h>
(quoted diff) +0 -0

b/arch/arm/plat- samsung/include/plat/regs-iic.h deleted file mode 100644 index 2f7c17d..0000000

arch/arm/plat-samsung/include/plat/regs-iic.h deleted +0 -6
@@ -1,56 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-iic.h
- *
- * Copyright (c) 2004 Simtec Electronics <[email protected]>
- *		http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or

modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 I2C Controller

arch/arm/plat-samsung/include/plat/regs-iic.h deleted +0 -46
-*/
-
-#ifndef __ASM_ARCH_REGS_IIC_H
-#define __ASM_ARCH_REGS_IIC_H __FILE__
-
-/* see s3c2410x user guide, v1.1, section 9 (p447) for more info */
-
-#define S3C2410_IICREG(x) (x)
-
-#define S3C2410_IICCON    S3C2410_IICREG(0x00)
-#define S3C2410_IICSTAT   S3C2410_IICREG(0x04)
-#define S3C2410_IICADD    S3C2410_IICREG(0x08)
-#define S3C2410_IICDS     S3C2410_IICREG(0x0C)
-#define S3C2440_IICLC	  S3C2410_IICREG(0x10)
-
-#define S3C2410_IICCON_ACKEN		(1<<7)
-#define S3C2410_IICCON_TXDIV_16		(0<<6)
-#define S3C2410_IICCON_TXDIV_512	(1<<6)
-#define S3C2410_IICCON_IRQEN		(1<<5)
-#define S3C2410_IICCON_IRQPEND		(1<<4)
-#define S3C2410_IICCON_SCALE(x)		((x)&15)
-#define S3C2410_IICCON_SCALEMASK	(0xf)
-
-#define S3C2410_IICSTAT_MASTER_RX	(2<<6)
-#define S3C2410_IICSTAT_MASTER_TX	(3<<6)
-#define S3C2410_IICSTAT_SLAVE_RX	(0<<6)
-#define S3C2410_IICSTAT_SLAVE_TX	(1<<6)
-#define S3C2410_IICSTAT_MODEMASK	(3<<6)
-
-#define S3C2410_IICSTAT_START		(1<<5)
-#define S3C2410_IICSTAT_BUSBUSY		(1<<5)
-#define S3C2410_IICSTAT_TXRXEN		(1<<4)
-#define S3C2410_IICSTAT_ARBITR		(1<<3)
-#define S3C2410_IICSTAT_ASSLAVE		(1<<2)
-#define S3C2410_IICSTAT_ADDR0		(1<<1)
-#define S3C2410_IICSTAT_LASTBIT		(1<<0)
-
-#define S3C2410_IICLC_SDA_DELAY0	(0 << 0)
-#define S3C2410_IICLC_SDA_DELAY5	(1 << 0)
-#define S3C2410_IICLC_SDA_DELAY10	(2 << 0)
-#define S3C2410_IICLC_SDA_DELAY15	(3 << 0)
-#define S3C2410_IICLC_SDA_DELAY_MASK	(3 << 0)
-
-#define S3C2410_IICLC_FILTER_ON		(1<<2)
-
-#endif /* __ASM_ARCH_REGS_IIC_H */
(quoted diff) +0 -0

b/drivers/i2c/busses/i2c- s3c2410.c index a290d08..5cc4f71 100644

drivers/i2c/busses/i2c-s3c2410.c +40 -1
@@ -42,9 +42,48 @@
 
 #include <asm/irq.h>
 
-#include <plat/regs-iic.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 
+/* see s3c2410x user guide, v1.1, section 9 (p447) for more info */
+
+#define S3C2410_IICREG(x) (x)
+
+#define S3C2410_IICCON    S3C2410_IICREG(0x00)
+#define S3C2410_IICSTAT   S3C2410_IICREG(0x04)
+#define S3C2410_IICADD    S3C2410_IICREG(0x08)
+#define S3C2410_IICDS     S3C2410_IICREG(0x0C)
+#define S3C2440_IICLC	  S3C2410_IICREG(0x10)
+
+#define S3C2410_IICCON_ACKEN		(1<<7)
+#define S3C2410_IICCON_TXDIV_16		(0<<6)
+#define S3C2410_IICCON_TXDIV_512	(1<<6)
+#define S3C2410_IICCON_IRQEN		(1<<5)
+#define S3C2410_IICCON_IRQPEND		(1<<4)
+#define S3C2410_IICCON_SCALE(x)		((x)&15)
+#define S3C2410_IICCON_SCALEMASK	(0xf)
+
+#define S3C2410_IICSTAT_MASTER_RX	(2<<6)
+#define S3C2410_IICSTAT_MASTER_TX	(3<<6)
+#define S3C2410_IICSTAT_SLAVE_RX	(0<<6)
+#define S3C2410_IICSTAT_SLAVE_TX	(1<<6)
+#define S3C2410_IICSTAT_MODEMASK	(3<<6)
+
+#define S3C2410_IICSTAT_START		(1<<5)
+#define S3C2410_IICSTAT_BUSBUSY		(1<<5)
+#define S3C2410_IICSTAT_TXRXEN		(1<<4)
+#define S3C2410_IICSTAT_ARBITR		(1<<3)
+#define S3C2410_IICSTAT_ASSLAVE		(1<<2)
+#define S3C2410_IICSTAT_ADDR0		(1<<1)
+#define S3C2410_IICSTAT_LASTBIT		(1<<0)
+
+#define S3C2410_IICLC_SDA_DELAY0	(0 << 0)
+#define S3C2410_IICLC_SDA_DELAY5	(1 << 0)
+#define S3C2410_IICLC_SDA_DELAY10	(2 << 0)
+#define S3C2410_IICLC_SDA_DELAY15	(3 << 0)
+#define S3C2410_IICLC_SDA_DELAY_MASK	(3 << 0)
+
+#define S3C2410_IICLC_FILTER_ON		(1<<2)
+
 /* Treat S3C2410 as baseline hardware, anything else is supported via
Quoted 5 lines

quirks */
#define QUIRK_S3C2440 (1 << 0)
#define QUIRK_HDMIPHY (1 << 1)
--
1.7.2.3

Looks good to me on this series:

Quoted 4 lines

Hi Wolfram, if you're ok on this, please pick up into your tree with my ack.

Re-sending due to changing of Wolfram's e-mail address.

Thanks.

- Kukjin

#5 lore raw

PATCH 1/2 i2c: s3c2410: move mach/regs-iic.h into i2c-s3c2410 device driver

In reply to Heiko Stübner
Quoted 5 lines · Heiko St?bner

The register definitions are only used in the driver itself. This also removes the last dependency on plat/ includes from the i2c driver.

What tree is this against? I can't apply it on top of v3.8 or 3.9-rc3.

#6 lore raw

PATCH 1/2 i2c: s3c2410: move mach/regs-iic.h into i2c-s3c2410 device driver

Hi Wolfram,

Am Donnerstag, 21. M?rz 2013, 10:57:58 schrieb Wolfram Sang:

Quoted 8 lines · Heiko St?bner
Quoted 5 lines

The register definitions are only used in the driver itself. This also removes the last dependency on plat/ includes from the i2c driver.

What tree is this against? I can't apply it on top of v3.8 or 3.9-rc3.

I'm not sure anymore ... probably some linux-next. I'll redo them on top of your (i2c) for-next branch.

Heiko

#7 lore raw

PATCH 1/2 i2c: s3c2410: move mach/regs-iic.h into i2c-s3c2410 device driver

Quoted 2 lines

I'm not sure anymore ... probably some linux-next. I'll redo them on top of your (i2c) for-next branch.

Thanks, but please use 3.9-rc3.