Skip to contentSkip to conversation

Reserving a fixed physical address page of RAM.

DISCUSSION Jon Ringle 2 participants 2 messages Nov 30, 2006

lore
Share & tools
lore

Jon Ringle

author
#0 lore raw
Quoted 10 lines · Fawad Lateef
Quoted 2 lines · Jon Ringle
Quoted 1 line · Fawad Lateef

Yes, this can be used if required physical-memory exists

in the last

Quoted 2 lines
Quoted 2 lines

part of RAM as if you use mem=<xxxM> then kernel will only use memory less than or equal-to <xxxM> and above can be used

by drivers

Quoted 3 lines
Quoted 2 lines

(or any kernel module) might be through ioremap which takes physical-address.

Quoted 7 lines
Quoted 1 line

Seems that using mem= has to be in 1MB increments, where I

only need 4K.

Quoted 1 line

No AFAIK you can specify it in KBs (see
http://sosdg.org/~coywolf/lxr/source/Documentation/kernel-para
meters.txt#L869)

Yes, you can specify the mem= using K notation, but there is a test in arch/arm/mm/mm-armv.c:create_mapping() that prevents the mapping from being created if the boundaries are not MB aligned:

	if (mem_types[md->type].prot_l1 == 0 &&
	    (virt & 0xfffff || (virt + off) & 0xfffff || (virt + length)
& 0xfffff)) {
		printk(KERN_WARNING "BUG: map for 0x%08lx at 0x%08lx can
not "
		       "be mapped using pages, ignoring.\n",
		       __pfn_to_phys(md->pfn), md->virtual);
		return;
	}

This is in linux-2.6.16.29.

Quoted 29 lines
Quoted 3 lines
Quoted 3 lines

But if lets say we need only 1MB portion of specific

physical-memory

Quoted 1 line
Quoted 1 line

region then AFAIK it must be done by hacking in kernel

code during

Quoted 6 lines
Quoted 6 lines

memory-initialization (mem_init
function) where it is marking/checking pages as/are reserved; you can simply mark you required pages as reserved too and set their count to some-value if you want to know later which pages are reserved by you. (can do this reservation work
here:

http://lxr.free-electrons.com/source/arch/i386/mm/init.c#605).

Quoted 9 lines

Do you think that the following would work to properly reserve the memory. If it does, then I think I can just do a ioremap(0x0ffff000, 0x1000) to obtain a virtual address. (Ofcourse I would actually use symbolic names rather than the hardcoded addesses shown here).

Index: linux/arch/arm/mm/init.c
===================================================================
--- linux.orig/arch/arm/mm/init.c 2006-11-30

11:03:00.000000000

Quoted 6 lines

-0500
+++ linux/arch/arm/mm/init.c 2006-11-30 11:09:09.000000000 -0500

(quoted diff) +0 -0
@@ -429,6 +429,10 @@
        unsigned long addr;
        void *vectors;
 
Quoted 13 lines

Review line 437

Quoted 8 lines
(quoted diff) +3 -0
+#ifdef CONFIG_MACH_VERTICAL_RSC4
+       reserve_bootmem (0x0ffff000, 0x1000); #endif
+
        /*
         * Allocate the vector page early.
         */

I think you can do like this but can't say accurately because I havn't worked on arm architecture and also you havn't mentioned your kernel-version or function (in file arch/arm/mm/init.c) which you are going to do call reserve_bootmem !

Kernel version is 2.6.16.29 and the reserve_bootmem() call above is at the top of the function devicemaps_init().

Jon

#1 lore raw
Quoted 33 lines · Jon Ringle
Quoted 10 lines · Fawad Lateef
Quoted 2 lines · Jon Ringle
Quoted 1 line · Fawad Lateef

Yes, this can be used if required physical-memory exists

in the last

Quoted 2 lines
Quoted 2 lines

part of RAM as if you use mem=<xxxM> then kernel will only use memory less than or equal-to <xxxM> and above can be used

by drivers

Quoted 3 lines
Quoted 2 lines

(or any kernel module) might be through ioremap which takes physical-address.

Quoted 7 lines
Quoted 1 line

Seems that using mem= has to be in 1MB increments, where I

only need 4K.

Quoted 1 line

No AFAIK you can specify it in KBs (see
http://sosdg.org/~coywolf/lxr/source/Documentation/kernel-para
meters.txt#L869)

Yes, you can specify the mem= using K notation, but there is a test in arch/arm/mm/mm-armv.c:create_mapping() that prevents the mapping from being created if the boundaries are not MB aligned:

        if (mem_types[md->type].prot_l1 == 0 &&
            (virt & 0xfffff || (virt + off) & 0xfffff || (virt + length)
& 0xfffff)) {
                printk(KERN_WARNING "BUG: map for 0x%08lx at 0x%08lx can
not "
                       "be mapped using pages, ignoring.\n",
                       __pfn_to_phys(md->pfn), md->virtual);
                return;
        }
Quoted 2 lines

This is in linux-2.6.16.29.

Ohh ok, I don't know about this architecture related information.

Quoted 43 lines
Quoted 29 lines
Quoted 3 lines
Quoted 3 lines

But if lets say we need only 1MB portion of specific

physical-memory

Quoted 1 line
Quoted 1 line

region then AFAIK it must be done by hacking in kernel

code during

Quoted 6 lines
Quoted 6 lines

memory-initialization (mem_init
function) where it is marking/checking pages as/are reserved; you can simply mark you required pages as reserved too and set their count to some-value if you want to know later which pages are reserved by you. (can do this reservation work
here:

http://lxr.free-electrons.com/source/arch/i386/mm/init.c#605).

Quoted 9 lines

Do you think that the following would work to properly reserve the memory. If it does, then I think I can just do a ioremap(0x0ffff000, 0x1000) to obtain a virtual address. (Ofcourse I would actually use symbolic names rather than the hardcoded addesses shown here).

Index: linux/arch/arm/mm/init.c
===================================================================
--- linux.orig/arch/arm/mm/init.c 2006-11-30

11:03:00.000000000

Quoted 6 lines

-0500
+++ linux/arch/arm/mm/init.c 2006-11-30 11:09:09.000000000 -0500

(quoted diff) +0 -0
@@ -429,6 +429,10 @@
        unsigned long addr;
        void *vectors;
 
Quoted 13 lines

Review line 437

Quoted 8 lines
(quoted diff) +3 -0
+#ifdef CONFIG_MACH_VERTICAL_RSC4
+       reserve_bootmem (0x0ffff000, 0x1000); #endif
+
        /*
         * Allocate the vector page early.
         */

I think you can do like this but can't say accurately because I havn't worked on arm architecture and also you havn't mentioned your kernel-version or function (in file arch/arm/mm/init.c) which you are going to do call reserve_bootmem !

Quoted 3 lines

Kernel version is 2.6.16.29 and the reserve_bootmem() call above is at the top of the function devicemaps_init().

reserving_bootmem in devicemaps_init will work but I think it will be better if you do this in mem_init function (here:
http://sosdg.org/~coywolf/lxr/source/arch/arm/mm/init.c?v=2.6.16;a=arm#L620),
so that all the paging and other map related stuff completes. (CMIIW)

Signature · 1 line
Fawad Lateef