x86/fred: Fix INT80 emulation for FRED
Subsystems (3)
Xin Li (Intel)
maintainerPATCH v3 1/1 x86/fred: Fix INT80 emulation for FRED
Add a FRED-specific INT80 handler fred_int80_emulation():
1) As INT instructions and hardware interrupts are separate event types, FRED does not preclude the use of vector 0x80 for external interrupts. As a result the FRED setup code does *NOT* reserve vector 0x80 and calling int80_is_external() is not merely suboptimal but actively incorrect: it could cause a system call to be incorrectly ignored.
2) fred_int80_emulation(), only called for handling vector 0x80 of event type EVENT_TYPE_SWINT, will NEVER be called to handle any external interrupt (event type EVENT_TYPE_EXTINT).
3) The FRED kernel entry handler does *NOT* dispatch INT instructions, which is of event type EVENT_TYPE_SWINT, so compared with do_int80_emulation(), there is no need to do any user mode check.
4) int80_emulation() does a CLEAR_BRANCH_HISTORY, which is likely overkill for new x86 CPU implementations that support FRED.
5) int $0x80 is the FAST path for 32-bit system calls under FRED.
A dedicated FRED INT80 handler duplicates quite a bit of the code in do_int80_emulation(), but it avoids sprinkling more tests and seems more readable. Just remember that we can always unify common stuff later if it turns out that it won't diverge anymore, i.e., after the FRED code settles.
---
Changes since v2:
* Add comments explaining the reasons why a FRED-specific INT80 handler is required to the head comment of fred_int80_emulation(), not just the change log (H. Peter Anvin).
* Incorporate extra clarifications from H. Peter Anvin.
* Fix a few typos and wordings (H. Peter Anvin).
* Add a maintainer tip to the change log and head comment: unify common stuff later, i.e., after the code settles (Borislav Petkov).
Change since v1:
* Prefer a FRED-specific INT80 handler instead of sprinkling more tests around (Borislav Petkov).
--- arch/x86/entry/common.c | 64 +++++++++++++++++++++++++++++++++++++ arch/x86/entry/entry_fred.c | 2 +- 2 files changed, 65 insertions(+), 1 deletion(-)
arch/x86/entry/common.c +64 -0
@@ -255,6 +255,70 @@ __visible noinstr void do_int80_emulation(struct pt_regs *regs)instrumentation_end (); syscall_exit_to_user_mode(regs); } + +#ifdef CONFIG_X86_FRED +/* +* A FRED-specific INT80 handler fred_int80_emulation() is required: +* +* 1) As INT instructions and hardware interrupts are separate event +* types, FRED does not preclude the use of vector 0x80 for external +* interrupts. As a result the FRED setup code does *NOT* reserve +* vector 0x80 and calling int80_is_external() is not merely +* suboptimal but actively incorrect: it could cause a system call +* to be incorrectly ignored. +* +* 2) fred_int80_emulation(), only called for handling vector 0x80 of +* event type EVENT_TYPE_SWINT, will NEVER be called to handle any +* external interrupt (event type EVENT_TYPE_EXTINT). +* +* 3) The FRED kernel entry handler does *NOT* dispatch INT instructions, +* which is of event type EVENT_TYPE_SWINT, so compared with +* do_int80_emulation(), there is no need to do any user mode check. +* +* 4) int80_emulation() does a CLEAR_BRANCH_HISTORY, which is likely +* overkill for new x86 CPU implementations that support FRED. +* +* 5) int $0x80 is the FAST path for 32-bit system calls under FRED. +* +* A dedicated FRED INT80 handler duplicates quite a bit of the code in +* do_int80_emulation(), but it avoids sprinkling more tests and seems +* more readable. Just remember that we can always unify common stuff +* later if it turns out that it won't diverge anymore, i.e., after the +* FRED code settles. +*/ +DEFINE_FREDENTRY_RAW (int80_emulation) +{ +int nr; + +enter_from_user_mode (regs); + +instrumentation_begin (); +add_random_kstack_offset (); + +/* +* FRED pushed 0 into regs::orig_ax and regs::ax contains the +* syscall number. +* +* User tracing code (ptrace or signal handlers) might assume +* that the regs::orig_ax contains a 32-bit number on invoking +* a 32-bit syscall. +* +* Establish the syscall convention by saving the 32bit truncated +* syscall number in regs::orig_ax and by invalidating regs::ax. +*/ + regs->orig_ax = regs->ax &GENMASK (31 ,0 ); + regs->ax = -ENOSYS ; + + nr =syscall_32_enter (regs); + +local_irq_enable (); + nr =syscall_enter_from_user_mode_work (regs, nr); +do_syscall_32_irqs_on (regs, nr); + +instrumentation_end (); +syscall_exit_to_user_mode (regs); +} +#endif #else /* CONFIG_IA32_EMULATION */ /* Handles int $0x80 on a 32bit kernel */
arch/x86/entry/entry_fred.c +1 -1
@@ -66,7 +66,7 @@ static noinstr void fred_intx(struct pt_regs *regs)/* INT80 */ case IA32_SYSCALL_VECTOR :if (ia32_enabled ()) -return int80_emulation (regs); +return fred_int80_emulation (regs); fallthrough;#endif
base-commit: 367dc2b68007e8ca00a0d8dc9afb69bff5451ae7
Signature · 1 line
2.44.0
Borislav Petkov
maintainerQuoted 3 lines · Xin Li (Intel)
3) The FRED kernel entry handler does *NOT* dispatch INT instructions, which is of event type
EVENT_TYPE_SWINT, so compared withdo_int80_emulation(), there is no need to do any user mode check.
What does that mean?
An event handler doesn't dispatch INT insns?
/me is confused.
Quoted 20 lines
arch/x86/entry/common.c +20
-0+#ifdef CONFIG_X86_FRED +/* +* A FRED-specific INT80 handler fred_int80_emulation() is required: +* +* 1) As INT instructions and hardware interrupts are separate event +* types, FRED does not preclude the use of vector 0x80 for external +* interrupts. As a result the FRED setup code does *NOT* reserve +* vector 0x80 and calling int80_is_external() is not merely +* suboptimal but actively incorrect: it could cause a system call +* to be incorrectly ignored. +* +* 2) fred_int80_emulation(), only called for handling vector 0x80 of +* event type EVENT_TYPE_SWINT, will NEVER be called to handle any +* external interrupt (event type EVENT_TYPE_EXTINT). +* +* 3) The FRED kernel entry handler does *NOT* dispatch INT instructions, +* which is of event type EVENT_TYPE_SWINT, so compared with +* do_int80_emulation(), there is no need to do any user mode check. +* +* 4) int80_emulation() does a CLEAR_BRANCH_HISTORY, which is likely
arch/x86/entry/common.c __visible noinstr void do_int80_emulation(struct pt_regs *regs) · line 288
Quoted 10 lines
arch/x86/entry/common.c +10
-0+* overkill for new x86 CPU implementations that support FRED. +* +* 5) int $0x80 is the FAST path for 32-bit system calls under FRED. +* +* A dedicated FRED INT80 handler duplicates quite a bit of the code in +* do_int80_emulation(), but it avoids sprinkling more tests and seems +* more readable. Just remember that we can always unify common stuff +* later if it turns out that it won't diverge anymore, i.e., after the +* FRED code settles. +*/
And this is talking about duplication above and that text is duplicated from the commit message. :)
I'll zap it when applying.
Thx.
Signature · 4 lines
Regards/Gruss,
Boris.
https://people.kernel.org/tglx/notes-about-netiquetteH. Peter Anvin
maintainerQuoted 10 lines · Borislav Petkov
Quoted 3 lines · Xin Li (Intel)
3) The FRED kernel entry handler does *NOT* dispatch INT instructions, which is of event type
EVENT_TYPE_SWINT, so compared withdo_int80_emulation(), there is no need to do any user mode check.What does that mean?
An event handler doesn't dispatch INT insns?
/me is confused.
FRED has separate entry flows depending on if the event came from user space or kernel space:
asm_fred_entrypoint_user -> fred_entry_from_user
asm_fred_entrypoint_kernel -> fred_entry_from_kernel
fred_entry_from_kernel does not invoke fred_intx() if the event type is EVENT_TYPE_SWINT, instead it falls through to fred_bad_type(). Perhaps fred_intx() should be renamed fred_intx_user() for additional clarity.
(It might also we worth noting in that function that the reason int $0x03 and int $0x04 are dispatched as INT3 and INTO is to be fully user space compatible with legacy IDT, which behaves similarly.)
Thus, the int $0x80 code is simply not reachable from kernel space; if kernel code were to invoke int $0x80 or any other INT instruction it will error out before getting to this code.
Quoted 34 lines
Quoted 20 lines
arch/x86/entry/common.c +20
-0+#ifdef CONFIG_X86_FRED +/* +* A FRED-specific INT80 handler fred_int80_emulation() is required: +* +* 1) As INT instructions and hardware interrupts are separate event +* types, FRED does not preclude the use of vector 0x80 for external +* interrupts. As a result the FRED setup code does *NOT* reserve +* vector 0x80 and calling int80_is_external() is not merely +* suboptimal but actively incorrect: it could cause a system call +* to be incorrectly ignored. +* +* 2) fred_int80_emulation(), only called for handling vector 0x80 of +* event type EVENT_TYPE_SWINT, will NEVER be called to handle any +* external interrupt (event type EVENT_TYPE_EXTINT). +* +* 3) The FRED kernel entry handler does *NOT* dispatch INT instructions, +* which is of event type EVENT_TYPE_SWINT, so compared with +* do_int80_emulation(), there is no need to do any user mode check. +* +* 4) int80_emulation() does a CLEAR_BRANCH_HISTORY, which is likely arch/x86/entry/common.c __visible noinstr void do_int80_emulation(struct pt_regs *regs) · line 288
Quoted 10 lines
arch/x86/entry/common.c +10
-0+* overkill for new x86 CPU implementations that support FRED. +* +* 5) int $0x80 is the FAST path for 32-bit system calls under FRED. +* +* A dedicated FRED INT80 handler duplicates quite a bit of the code in +* do_int80_emulation(), but it avoids sprinkling more tests and seems +* more readable. Just remember that we can always unify common stuff +* later if it turns out that it won't diverge anymore, i.e., after the +* FRED code settles. +*/ And this is talking about duplication above and that text is duplicated from the commit message. :)
Quoted 2 lines
I'll zap it when applying.
I suggested putting it into a comment for future reference. Obviously no need to duplicate it in the commit message :)
-hpa
Xin Li
maintainerQuoted 12 lines · H. Peter Anvin
Quoted 10 lines · Borislav Petkov
Quoted 3 lines · Xin Li (Intel)
3) The FRED kernel entry handler does *NOT* dispatch INT instructions, which is of event type
EVENT_TYPE_SWINT, so compared withdo_int80_emulation(), there is no need to do any user mode check.What does that mean?
An event handler doesn't dispatch INT insns?
/me is confused.
Quoted 7 lines
FRED has separate entry flows depending on if the event came from user space or kernel space:
asm_fred_entrypoint_user->fred_entry_from_user
asm_fred_entrypoint_kernel->fred_entry_from_kernel
fred_entry_from_kerneldoes not invokefred_intx()if the event type isEVENT_TYPE_SWINT, instead it falls through tofred_bad_type(). Perhapsfred_intx()should be renamedfred_intx_user()for additional clarity.
This is a good idea, and again naming is so important.
Quoted 2 lines
(It might also we worth noting in that function that the reason int $0x03 and int $0x04 are dispatched as INT3 and INTO is to be fully user space compatible with legacy IDT, which behaves similarly.)
Yeah, this is subtle, and we'd better make it explicit with comments.
FRED distinguishes int $0x03/$0x04 from INT3/INTO with event type EVENT_TYPE_SWINT and EVENT_TYPE_SWEXC, and the Linux kernel itself can still use INT3/INTO, however int $0x03/$0x04 is NOT allowed from kernel context.
Quoted 38 lines
Thus, the int $0x80 code is simply not reachable from kernel space; if kernel code were to invoke int $0x80 or any other INT instruction it will error out before getting to this code.
Quoted 35 lines
Quoted 23 lines
arch/x86/entry/common.c +16
-0+#ifdef CONFIG_X86_FRED +/* +* A FRED-specific INT80 handler fred_int80_emulation() is required: +* +* 1) As INT instructions and hardware interrupts are separate event +* types, FRED does not preclude the use of vector 0x80 for external +* interrupts. As a result the FRED setup code does *NOT* reserve +* vector 0x80 and calling int80_is_external() is not merely +* suboptimal but actively incorrect: it could cause a system call +* to be incorrectly ignored. +* +* 2) fred_int80_emulation(), only called for handling vector 0x80 of +* event type EVENT_TYPE_SWINT, will NEVER be called to handle any +* external interrupt (event type EVENT_TYPE_EXTINT). +* +* 3) The FRED kernel entry handler does *NOT* dispatch INT instructions,
+ * which is of event typeEVENT_TYPE_SWINT, so compared with
+ *do_int80_emulation(), there is no need to do any user mode check.
+ *
+ * 4)int80_emulation()does aCLEAR_BRANCH_HISTORY, which is likely
+ * overkill for new x86 CPU implementations that support FRED.
+ *Quoted 8 lines
+ * 5) int $0x80 is the FAST path for 32-bit system calls under FRED.
+ *
+ * A dedicated FRED INT80 handler duplicates quite a bit of the code in
+ *do_int80_emulation(), but it avoids sprinkling more tests and seems
+ * more readable. Just remember that we can always unify common stuff
+ * later if it turns out that it won't diverge anymore, i.e., after the
+ * FRED code settles.
+ */And this is talking about duplication above and that text is duplicated from the commit message. :)
Quoted 5 lines
Quoted 2 lines
I'll zap it when applying.
I suggested putting it into a comment for future reference. Obviously no need to duplicate it in the commit message :)
yes!
Borislav Petkov
maintainerQuoted 10 lines · H. Peter Anvin
FRED has separate entry flows depending on if the event came from user space or kernel space:
asm_fred_entrypoint_user->fred_entry_from_user
asm_fred_entrypoint_kernel->fred_entry_from_kernel
fred_entry_from_kerneldoes not invokefred_intx()if the event type isEVENT_TYPE_SWINT, instead it falls through tofred_bad_type(). Perhapsfred_intx()should be renamedfred_intx_user()for additional clarity.
Sure.
Quoted 3 lines
(It might also we worth noting in that function that the reason int $0x03 and int $0x04 are dispatched as INT3 and INTO is to be fully user space compatible with legacy IDT, which behaves similarly.)
Also yes.
Quoted 3 lines
Thus, the int $0x80 code is simply not reachable from kernel space; if kernel code were to invoke int $0x80 or any other INT instruction it will error out before getting to this code.
Yah, that explanation is a lot better, thanks. I'll use it. :)
Quoted 2 lines
I suggested putting it into a comment for future reference. Obviously no need to duplicate it in the commit message :)
Yap, that makes more sense.
Thx.
Signature · 4 lines
Regards/Gruss,
Boris.
https://people.kernel.org/tglx/notes-about-netiquetteXin Li
maintainerQuoted 11 lines · Borislav Petkov
Quoted 3 lines · Xin Li (Intel)
3) The FRED kernel entry handler does *NOT* dispatch INT instructions, which is of event type
EVENT_TYPE_SWINT, so compared withdo_int80_emulation(), there is no need to do any user mode check.What does that mean?
An event handler doesn't dispatch INT insns?
/me is confused.
Maybe better to say?
The FRED kernel entry handler fred_entry_from_kernel() calls fred_bad_type() if an event is of type EVENT_TYPE_SWINT because Kernel does not use INT insns! So if the kernel is handling an INT insn, it can only be from a user level application.
Quoted 9 lines
Quoted 6 lines
+ * A dedicated FRED INT80 handler duplicates quite a bit of the code in
+ *do_int80_emulation(), but it avoids sprinkling more tests and seems
+ * more readable. Just remember that we can always unify common stuff
+ * later if it turns out that it won't diverge anymore, i.e., after the
+ * FRED code settles.
+ */And this is talking about duplication above and that text is duplicated from the commit message. :)
I wanted to keep it as a TODO. I can remove it in the next iteration.
Quoted 5 lines
I'll zap it when applying.
Thx.
H. Peter Anvin
maintainerQuoted 8 lines · Xin Li
Quoted 7 lines · Borislav Petkov
Quoted 3 lines · Xin Li (Intel)
3) The FRED kernel entry handler does *NOT* dispatch INT instructions, which is of event type
EVENT_TYPE_SWINT, so compared withdo_int80_emulation(), there is no need to do any user mode check.What does that mean?
Quoted 9 lines
Quoted 4 lines
An event handler doesn't dispatch INT insns?
/me is confused.
Maybe better to say?
The FRED kernel entry handler
fred_entry_from_kernel()callsfred_bad_type()if an event is of typeEVENT_TYPE_SWINTbecause Kernel does not use INT insns! So if the kernel is handling an INT insn, it can only be from a user level application.
(Note: if we at some point in the future we may end up adding INT calls from the kernel, at least on FRED it would *still* not share the same code paths and so int $0x80 would not get dispatched.)
-hpa
Quoted 13 lines · Xin Li (Intel)
Add a FRED-specific INT80 handler
fred_int80_emulation():1) As INT instructions and hardware interrupts are separate event types, FRED does not preclude the use of vector
0x80for external interrupts. As a result the FRED setup code does *NOT* reserve vector0x80and callingint80_is_external()is not merely suboptimal but actively incorrect: it could cause a system call to be incorrectly ignored.2)
fred_int80_emulation(), only called for handling vector0x80of event typeEVENT_TYPE_SWINT, will NEVER be called to handle any external interrupt (event typeEVENT_TYPE_EXTINT).
Quoted 5 lines
3) The FRED kernel entry handler does *NOT* dispatch INT instructions, which is of event type
EVENT_TYPE_SWINT, so compared withdo_int80_emulation(), there is no need to do any user mode check.4)
int80_emulation()does aCLEAR_BRANCH_HISTORY, which is likely > overkill for new x86 CPU implementations that support FRED.
Well, that's a bit of an overstatement/speculation, because clear_branch_history will only be effective if the machine is susceptible to the given bug and there isn't a better options (i.e using a hardware bit controlling the respective aspect of the CPU).
Quoted 122 lines
5) int $0x80 is the FAST path for 32-bit system calls under FRED.
A dedicated FRED INT80 handler duplicates quite a bit of the code in
do_int80_emulation(), but it avoids sprinkling more tests and seems more readable. Just remember that we can always unify common stuff later if it turns out that it won't diverge anymore, i.e., after the FRED code settles.Fixes 55617fb991df ("x86/entry: Do not allow external 0x80 interrupts")Suggested-by H. Peter Anvin (Intel) <[email protected]>Signed-off-by Xin Li (Intel) <[email protected]>---
Changes since v2:
* Add comments explaining the reasons why a FRED-specific INT80 handler is required to the head comment offred_int80_emulation(), not just the change log (H. Peter Anvin).
* Incorporate extra clarifications from H. Peter Anvin.
* Fix a few typos and wordings (H. Peter Anvin).
* Add a maintainer tip to the change log and head comment: unify common stuff later, i.e., after the code settles (Borislav Petkov).Change since v1:
* Prefer a FRED-specific INT80 handler instead of sprinkling more tests around (Borislav Petkov).--- arch/x86/entry/common.c | 64 +++++++++++++++++++++++++++++++++++++ arch/x86/entry/entry_fred.c | 2 +- 2 files changed, 65 insertions(+), 1 deletion(-)arch/x86/entry/common.c +64
-0@@ -255,6 +255,70 @@ __visible noinstr void do_int80_emulation(struct pt_regs *regs)instrumentation_end (); syscall_exit_to_user_mode(regs); } + +#ifdef CONFIG_X86_FRED +/* +* A FRED-specific INT80 handler fred_int80_emulation() is required: +* +* 1) As INT instructions and hardware interrupts are separate event +* types, FRED does not preclude the use of vector 0x80 for external +* interrupts. As a result the FRED setup code does *NOT* reserve +* vector 0x80 and calling int80_is_external() is not merely +* suboptimal but actively incorrect: it could cause a system call +* to be incorrectly ignored. +* +* 2) fred_int80_emulation(), only called for handling vector 0x80 of +* event type EVENT_TYPE_SWINT, will NEVER be called to handle any +* external interrupt (event type EVENT_TYPE_EXTINT). +* +* 3) The FRED kernel entry handler does *NOT* dispatch INT instructions, +* which is of event type EVENT_TYPE_SWINT, so compared with +* do_int80_emulation(), there is no need to do any user mode check. +* +* 4) int80_emulation() does a CLEAR_BRANCH_HISTORY, which is likely +* overkill for new x86 CPU implementations that support FRED. +* +* 5) int $0x80 is the FAST path for 32-bit system calls under FRED. +* +* A dedicated FRED INT80 handler duplicates quite a bit of the code in +* do_int80_emulation(), but it avoids sprinkling more tests and seems +* more readable. Just remember that we can always unify common stuff +* later if it turns out that it won't diverge anymore, i.e., after the +* FRED code settles. +*/ +DEFINE_FREDENTRY_RAW (int80_emulation) +{ +int nr; + +enter_from_user_mode (regs); + +instrumentation_begin (); +add_random_kstack_offset (); + +/* +* FRED pushed 0 into regs::orig_ax and regs::ax contains the +* syscall number. +* +* User tracing code (ptrace or signal handlers) might assume +* that the regs::orig_ax contains a 32-bit number on invoking +* a 32-bit syscall. +* +* Establish the syscall convention by saving the 32bit truncated +* syscall number in regs::orig_ax and by invalidating regs::ax. +*/ + regs->orig_ax = regs->ax &GENMASK (31 ,0 ); + regs->ax = -ENOSYS ; + + nr =syscall_32_enter (regs); + +local_irq_enable (); + nr =syscall_enter_from_user_mode_work (regs, nr); +do_syscall_32_irqs_on (regs, nr); + +instrumentation_end (); +syscall_exit_to_user_mode (regs); +} +#endif #else /* CONFIG_IA32_EMULATION */ /* Handles int $0x80 on a 32bit kernel */ arch/x86/entry/entry_fred.c +1
-1@@ -66,7 +66,7 @@ static noinstr void fred_intx(struct pt_regs *regs)/* INT80 */ case IA32_SYSCALL_VECTOR :if (ia32_enabled ()) -return int80_emulation (regs); +return fred_int80_emulation (regs); fallthrough;#endif base-commit:
367dc2b68007e8ca00a0d8dc9afb69bff5451ae7
H. Peter Anvin
maintainerQuoted 15 lines · Nikolay Borisov
Quoted 13 lines · Xin Li (Intel)
Add a FRED-specific INT80 handler
fred_int80_emulation():1) As INT instructions and hardware interrupts are separate event types, FRED does not preclude the use of vector
0x80for external interrupts. As a result the FRED setup code does *NOT* reserve vector0x80and callingint80_is_external()is not merely suboptimal but actively incorrect: it could cause a system call to be incorrectly ignored.2)
fred_int80_emulation(), only called for handling vector0x80of event typeEVENT_TYPE_SWINT, will NEVER be called to handle any external interrupt (event typeEVENT_TYPE_EXTINT).
Quoted 9 lines
Quoted 6 lines
3) The FRED kernel entry handler does *NOT* dispatch INT instructions, which is of event type
EVENT_TYPE_SWINT, so compared withdo_int80_emulation(), there is no need to do any user mode check.4)
int80_emulation()does aCLEAR_BRANCH_HISTORY, which is likelyQuoted 1 line
overkill for new x86 CPU implementations that support FRED.
Well, that's a bit of an overstatement/speculation, because
clear_branch_historywill only be effective if the machine is susceptible to the given bug and there isn't a better options (i.e using a hardware bit controlling the respective aspect of the CPU).Quoted 1 line
It would seem like a huge stretch to expect that a FRED-capable CPU would not have such a facility. This is a matter of establishing a baseline for FRED-capable hardware.
It would make more sense to me to add it if we turn out to need it; note that FRED code is currently only enabled on demand, in order to defend against bit rot until we have physical hardware.
Now, if this is still desired, it *probably* belongs better in either fred_intx()/fred_other() or asm_fred_entrypoint_user, depending on if this ought to be done for all entries from userspace or only system calls.
-hpa
Xin Li
maintainerQuoted 6 lines · H. Peter Anvin
Quoted 5 lines · Nikolay Borisov
Quoted 2 lines · Xin Li (Intel)
4)
int80_emulation()does aCLEAR_BRANCH_HISTORY, which is likelyQuoted 1 line
overkill for new x86 CPU implementations that support FRED.
Quoted 8 lines
Quoted 2 lines
Well, that's a bit of an overstatement/speculation, because
clear_branch_historywill only be effective if the machine is susceptible to the given bug and there isn't a better options (i.e using a hardware bit controlling the respective aspect of the CPU).Quoted 1 line
It would seem like a huge stretch to expect that a FRED-capable CPU would not have such a facility. This is a matter of establishing a baseline for FRED-capable hardware.
It would make more sense to me to add it if we turn out to need it; note that FRED code is currently only enabled on demand, in order to defend against bit rot until we have physical hardware.
Now, if this is still desired, it *probably* belongs better in either fred_intx()/fred_other() or
asm_fred_entrypoint_user, depending on if this ought to be done for all entries from userspace or only system calls.
My bad that I didn't make this a good comment, even neglected that clear_branch_history is just a nop on machines w/o such security issues.
So how about?
int80_emulation() does a CLEAR_BRANCH_HISTORY, which is IDT-specific.
While FRED will likely take a different approach when it is needed:
it *probably* belongs in either fred_intx()/fred_other() orasm_fred_entrypoint_user(), depending on if this ought to be done for all entries from userspace or only system calls.
H. Peter Anvin
maintainerQuoted 16 lines · Xin Li
Quoted 6 lines · H. Peter Anvin
Quoted 5 lines · Nikolay Borisov
Quoted 2 lines · Xin Li (Intel)
4)
int80_emulation()does aCLEAR_BRANCH_HISTORY, which is likelyQuoted 1 line
overkill for new x86 CPU implementations that support FRED.
Quoted 8 lines
Quoted 2 lines
Well, that's a bit of an overstatement/speculation, because
clear_branch_historywill only be effective if the machine is susceptible to the given bug and there isn't a better options (i.e using a hardware bit controlling the respective aspect of the CPU).Quoted 1 line
It would seem like a huge stretch to expect that a FRED-capable CPU would not have such a facility. This is a matter of establishing a baseline for FRED-capable hardware.
It would make more sense to me to add it if we turn out to need it; note that FRED code is currently only enabled on demand, in order to defend against bit rot until we have physical hardware.
Now, if this is still desired, it *probably* belongs better in either fred_intx()/fred_other() or
asm_fred_entrypoint_user, depending on if this ought to be done for all entries from userspace or only system calls.
Quoted 7 lines
My bad that I didn't make this a good comment, even neglected that
clear_branch_historyis just a nop on machines w/o such security issues.So how about?
int80_emulation()does aCLEAR_BRANCH_HISTORY, which is IDT-specific. While FRED will likely take a different approach when it is needed:
s/when/if it is ever needed/
Quoted 2 lines
it *probably* belongs in either fred_intx()/fred_other() or
asm_fred_entrypoint_user(), depending on if this ought to be done for all entries from userspace or only system calls.