Skip to contentSkip to conversation

ARM: meson: display Amlogic SoC Information

PATCH New Julien Masson 2 participants 2 messages Mar 25, 2019 – Mar 26, 2019

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 ARM: meson: display Amlogic SoC Information

The Amlogic SoCs have a registers containing the die revision and packaging type to determine the SoC family and package marketing name like S905X for the GXL SoC Family.

This code is taken from the Linux meson-gx-socinfo driver and adapted to U-Boot printing.

---
Changes from v1:
-> enable CONFIG_DISPLAY_BOARDINFO for nanopi-k2, khadas-vim2 and s400

-> handle the mask like the kernel when getting the package id:
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic.git/commit/?h=v5.2/drivers&id=dce47aed20c7de3ee2011b7a63e67f08e9dcfb5e

-> add new soc ids:
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic.git/commit/?h=v5.2/drivers&id=65f80df58eb770b2b687c35142c113d1ad6fa415

-> print the board model from the device tree

-> move all the source code in dedicated new file: board-info.c

 arch/arm/mach-meson/Makefile     |   2 +-
 arch/arm/mach-meson/board-info.c | 166 +++++++++++++++++++++++++++++++++++++++
 configs/khadas-vim2_defconfig    |   2 +-
 configs/khadas-vim_defconfig     |   2 +-
 configs/libretech-cc_defconfig   |   2 +-
 configs/nanopi-k2_defconfig      |   2 +-
 configs/odroid-c2_defconfig      |   2 +-
 configs/p212_defconfig           |   2 +-
 configs/s400_defconfig           |   2 +-
 9 files changed, 174 insertions(+), 8 deletions(-)
 create mode 100644 arch/arm/mach-meson/board-info.c
arch/arm/mach-meson/Makefile +1 -1
index b716e1a..6ddfba6 100644
@@ -2,6 +2,6 @@
 #
 # Copyright (c) 2016 Beniamino Galvani <[email protected]>
 
-obj-y += board-common.o sm.o
+obj-y += board-common.o sm.o board-info.o
 obj-$(CONFIG_MESON_GX) += board-gx.o
 obj-$(CONFIG_MESON_AXG) += board-axg.o
arch/arm/mach-meson/board-info.c new file +166 -0

166 lines not on this page · raw message

configs/khadas-vim2_defconfig +1 -1
index 0f738cb..7e40683 100644
@@ -9,7 +9,7 @@ CONFIG_DEBUG_UART=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_CONSOLE_MUX=y
 # CONFIG_DISPLAY_CPUINFO is not set
-# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_DISPLAY_BOARDINFO=y
 # CONFIG_CMD_BDI is not set
 # CONFIG_CMD_IMI is not set
 CONFIG_CMD_ADC=y
configs/khadas-vim_defconfig +1 -1
index 6f1ad0e..aeec2be 100644
@@ -11,7 +11,7 @@ CONFIG_OF_BOARD_SETUP=y
 CONFIG_CONSOLE_MUX=y
 CONFIG_MISC_INIT_R=y
 # CONFIG_DISPLAY_CPUINFO is not set
-# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_DISPLAY_BOARDINFO=y
 # CONFIG_CMD_BDI is not set
 # CONFIG_CMD_IMI is not set
 CONFIG_CMD_ADC=y
configs/libretech-cc_defconfig +1 -1
index d28c7ab..a1b9fd9 100644
@@ -10,7 +10,7 @@ CONFIG_NR_DRAM_BANKS=1
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_MISC_INIT_R=y
 # CONFIG_DISPLAY_CPUINFO is not set
-# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_DISPLAY_BOARDINFO=y
 # CONFIG_CMD_BDI is not set
 # CONFIG_CMD_IMI is not set
 CONFIG_CMD_ADC=y
configs/nanopi-k2_defconfig +1 -1
index 8bbf48f..60481cd 100644
@@ -9,7 +9,7 @@ CONFIG_NR_DRAM_BANKS=1
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_MISC_INIT_R=y
 # CONFIG_DISPLAY_CPUINFO is not set
-# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_DISPLAY_BOARDINFO=y
 # CONFIG_CMD_BDI is not set
 # CONFIG_CMD_IMI is not set
 CONFIG_CMD_GPIO=y
configs/odroid-c2_defconfig +1 -1
index 747da18..04904c2 100644
@@ -10,7 +10,7 @@ CONFIG_OF_BOARD_SETUP=y
 CONFIG_CONSOLE_MUX=y
 CONFIG_MISC_INIT_R=y
 # CONFIG_DISPLAY_CPUINFO is not set
-# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_DISPLAY_BOARDINFO=y
 # CONFIG_CMD_BDI is not set
 # CONFIG_CMD_IMI is not set
 CONFIG_CMD_GPIO=y
configs/p212_defconfig +1 -1
index b048863..0422740 100644
@@ -11,7 +11,7 @@ CONFIG_OF_BOARD_SETUP=y
 CONFIG_CONSOLE_MUX=y
 CONFIG_MISC_INIT_R=y
 # CONFIG_DISPLAY_CPUINFO is not set
-# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_DISPLAY_BOARDINFO=y
 # CONFIG_CMD_BDI is not set
 # CONFIG_CMD_IMI is not set
 CONFIG_CMD_GPIO=y
configs/s400_defconfig +1 -1
index 1bd4b71..6cd47d0 100644
@@ -10,7 +10,7 @@ CONFIG_NR_DRAM_BANKS=1
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_MISC_INIT_R=y
 # CONFIG_DISPLAY_CPUINFO is not set
-# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_DISPLAY_BOARDINFO=y
 # CONFIG_CMD_BDI is not set
 # CONFIG_CMD_IMI is not set
 CONFIG_CMD_GPIO=y
Signature · 1 line
2.7.4
#1 lore raw

PATCH v2 1/1 ARM: meson: display Amlogic SoC Information

Hi Julien,

Quoted 302 lines · Julien Masson

The Amlogic SoCs have a registers containing the die revision and packaging type to determine the SoC family and package marketing name like S905X for the GXL SoC Family.

This code is taken from the Linux meson-gx-socinfo driver and adapted to U-Boot printing.

---
Changes from v1:
-> enable CONFIG_DISPLAY_BOARDINFO for nanopi-k2, khadas-vim2 and s400

-> handle the mask like the kernel when getting the package id:
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic.git/commit/?h=v5.2/drivers&id=dce47aed20c7de3ee2011b7a63e67f08e9dcfb5e

-> add new soc ids:
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic.git/commit/?h=v5.2/drivers&id=65f80df58eb770b2b687c35142c113d1ad6fa415

-> print the board model from the device tree

-> move all the source code in dedicated new file: board-info.c

 arch/arm/mach-meson/Makefile     |   2 +-
 arch/arm/mach-meson/board-info.c | 166 +++++++++++++++++++++++++++++++++++++++
 configs/khadas-vim2_defconfig    |   2 +-
 configs/khadas-vim_defconfig     |   2 +-
 configs/libretech-cc_defconfig   |   2 +-
 configs/nanopi-k2_defconfig      |   2 +-
 configs/odroid-c2_defconfig      |   2 +-
 configs/p212_defconfig           |   2 +-
 configs/s400_defconfig           |   2 +-
 9 files changed, 174 insertions(+), 8 deletions(-)
 create mode 100644 arch/arm/mach-meson/board-info.c
arch/arm/mach-meson/Makefile +1 -1
index b716e1a..6ddfba6 100644
@@ -2,6 +2,6 @@
 #
 # Copyright (c) 2016 Beniamino Galvani <[email protected]>
 
-obj-y += board-common.o sm.o
+obj-y += board-common.o sm.o board-info.o
 obj-$(CONFIG_MESON_GX) += board-gx.o
 obj-$(CONFIG_MESON_AXG) += board-axg.o
arch/arm/mach-meson/board-info.c new file +166 -0
new file mode 100644
index 0000000..ba248e8
@@ -0,0 +1,166 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2019 Julien Masson <[email protected]>
+ * (C) Copyright 2019 Neil Armstrong <[email protected]>
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <dm.h>
+#include <linux/bitfield.h>
+#include <regmap.h>
+#include <syscon.h>
+
+#define AO_SEC_SD_CFG8		0xe0
+#define AO_SEC_SOCINFO_OFFSET	AO_SEC_SD_CFG8
+
+#define SOCINFO_MAJOR	GENMASK(31, 24)
+#define SOCINFO_PACK	GENMASK(23, 16)
+#define SOCINFO_MINOR	GENMASK(15, 8)
+#define SOCINFO_MISC	GENMASK(7, 0)
+
+static const struct meson_gx_soc_id {
+	const char *name;
+	unsigned int id;
+} soc_ids[] = {
+	{ "GXBB",   0x1f },
+	{ "GXTVBB", 0x20 },
+	{ "GXL",    0x21 },
+	{ "GXM",    0x22 },
+	{ "TXL",    0x23 },
+	{ "TXLX",   0x24 },
+	{ "AXG",    0x25 },
+	{ "GXLX",   0x26 },
+	{ "TXHD",   0x27 },
+	{ "G12A",   0x28 },
+	{ "G12B",   0x29 },
+};
+
+static const struct meson_gx_package_id {
+	const char *name;
+	unsigned int major_id;
+	unsigned int pack_id;
+	unsigned int pack_mask;
+} soc_packages[] = {
+	{ "S905",   0x1f, 0,    0x20 }, /* pack_id != 0x20 */
+	{ "S905H",  0x1f, 0x3,  0xf },  /* pack_id & 0xf == 0x3 */
+	{ "S905M",  0x1f, 0x20, 0xf0 }, /* pack_id == 0x20 */
+	{ "S905D",  0x21, 0,    0xf0 },
+	{ "S905X",  0x21, 0x80, 0xf0 },
+	{ "S905W",  0x21, 0xa0, 0xf0 },
+	{ "S905L",  0x21, 0xc0, 0xf0 },
+	{ "S905M2", 0x21, 0xe0, 0xf0 },
+	{ "S805X",  0x21, 0x30, 0xf0 },
+	{ "S805Y",  0x21, 0xb0, 0xf0 },
+	{ "S912",   0x22, 0,    0x0 },  /* Only S912 is known for GXM */
+	{ "962X",   0x24, 0x10, 0xf0 },
+	{ "962E",   0x24, 0x20, 0xf0 },
+	{ "A113X",  0x25, 0x37, 0xff },
+	{ "A113D",  0x25, 0x22, 0xff },
+	{ "S905D2", 0x28, 0x10, 0xf0 },
+	{ "S905X2", 0x28, 0x40, 0xf0 },
+	{ "S922X",  0x29, 0x40, 0xf0 },
+};
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static inline unsigned int socinfo_to_major(u32 socinfo)
+{
+	return FIELD_GET(SOCINFO_MAJOR, socinfo);
+}
+
+static inline unsigned int socinfo_to_minor(u32 socinfo)
+{
+	return FIELD_GET(SOCINFO_MINOR, socinfo);
+}
+
+static inline unsigned int socinfo_to_pack(u32 socinfo)
+{
+	return FIELD_GET(SOCINFO_PACK, socinfo);
+}
+
+static inline unsigned int socinfo_to_misc(u32 socinfo)
+{
+	return FIELD_GET(SOCINFO_MISC, socinfo);
+}
+
+static const char *socinfo_to_package_id(u32 socinfo)
+{
+	unsigned int pack = socinfo_to_pack(socinfo);
+	unsigned int major = socinfo_to_major(socinfo);
+	int i;
+
+	for (i = 0 ; i < ARRAY_SIZE(soc_packages) ; ++i) {
+		if (soc_packages[i].major_id == major &&
+		    soc_packages[i].pack_id ==
+		    (pack & soc_packages[i].pack_mask))
+			return soc_packages[i].name;
+	}
+
+	return "Unknown";
+}
+
+static const char *socinfo_to_soc_id(u32 socinfo)
+{
+	unsigned int id = socinfo_to_major(socinfo);
+	int i;
+
+	for (i = 0 ; i < ARRAY_SIZE(soc_ids) ; ++i) {
+		if (soc_ids[i].id == id)
+			return soc_ids[i].name;
+	}
+
+	return "Unknown";
+}
+
+static void print_board_model(void)
+{
+	const char *model;
+	model = fdt_getprop(gd->fdt_blob, 0, "model", NULL);
+	printf("Model: %s\n", model ? model : "Unknown");
+}
+
+int show_board_info(void)
+{
+	struct regmap *regmap;
+	int nodeoffset, ret;
+	ofnode node;
+	unsigned int socinfo;
+
+	/* find the offset of compatible node */
+	nodeoffset = fdt_node_offset_by_compatible(gd->fdt_blob, -1,
+						   "amlogic,meson-gx-ao-secure");
+	if (nodeoffset < 0)
+		return 0;
+
+	/* check if chip-id is available */
+	if (!fdt_getprop(gd->fdt_blob, nodeoffset, "amlogic,has-chip-id", NULL))
+		return 0;
+
+	/* get regmap from the syscon node */
+	node = offset_to_ofnode(nodeoffset);
+	regmap = syscon_node_to_regmap(node);
+	if (IS_ERR(regmap)) {
+		printf("%s: failed to get regmap\n", __func__);
+		return 0;
+	}
+
+	/* read soc info */
+	ret = regmap_read(regmap, AO_SEC_SOCINFO_OFFSET, &socinfo);
+	if (ret && !socinfo) {
+		printf("%s: invalid chipid value\n", __func__);
+		return 0;
+	}
+
+	/* print board information */
+	print_board_model();
+	printf("Soc:   Amlogic Meson %s (%s) Revision %x:%x (%x:%x)\n",
+	       socinfo_to_soc_id(socinfo),
+	       socinfo_to_package_id(socinfo),
+	       socinfo_to_major(socinfo),
+	       socinfo_to_minor(socinfo),
+	       socinfo_to_pack(socinfo),
+	       socinfo_to_misc(socinfo));
+
+	return 0;
+}
configs/khadas-vim2_defconfig +1 -1
index 0f738cb..7e40683 100644
@@ -9,7 +9,7 @@ CONFIG_DEBUG_UART=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_CONSOLE_MUX=y
 # CONFIG_DISPLAY_CPUINFO is not set
-# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_DISPLAY_BOARDINFO=y
 # CONFIG_CMD_BDI is not set
 # CONFIG_CMD_IMI is not set
 CONFIG_CMD_ADC=y
configs/khadas-vim_defconfig +1 -1
index 6f1ad0e..aeec2be 100644
@@ -11,7 +11,7 @@ CONFIG_OF_BOARD_SETUP=y
 CONFIG_CONSOLE_MUX=y
 CONFIG_MISC_INIT_R=y
 # CONFIG_DISPLAY_CPUINFO is not set
-# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_DISPLAY_BOARDINFO=y
 # CONFIG_CMD_BDI is not set
 # CONFIG_CMD_IMI is not set
 CONFIG_CMD_ADC=y
configs/libretech-cc_defconfig +1 -1
index d28c7ab..a1b9fd9 100644
@@ -10,7 +10,7 @@ CONFIG_NR_DRAM_BANKS=1
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_MISC_INIT_R=y
 # CONFIG_DISPLAY_CPUINFO is not set
-# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_DISPLAY_BOARDINFO=y
 # CONFIG_CMD_BDI is not set
 # CONFIG_CMD_IMI is not set
 CONFIG_CMD_ADC=y
configs/nanopi-k2_defconfig +1 -1
index 8bbf48f..60481cd 100644
@@ -9,7 +9,7 @@ CONFIG_NR_DRAM_BANKS=1
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_MISC_INIT_R=y
 # CONFIG_DISPLAY_CPUINFO is not set
-# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_DISPLAY_BOARDINFO=y
 # CONFIG_CMD_BDI is not set
 # CONFIG_CMD_IMI is not set
 CONFIG_CMD_GPIO=y
configs/odroid-c2_defconfig +1 -1
index 747da18..04904c2 100644
@@ -10,7 +10,7 @@ CONFIG_OF_BOARD_SETUP=y
 CONFIG_CONSOLE_MUX=y
 CONFIG_MISC_INIT_R=y
 # CONFIG_DISPLAY_CPUINFO is not set
-# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_DISPLAY_BOARDINFO=y
 # CONFIG_CMD_BDI is not set
 # CONFIG_CMD_IMI is not set
 CONFIG_CMD_GPIO=y
configs/p212_defconfig +1 -1
index b048863..0422740 100644
@@ -11,7 +11,7 @@ CONFIG_OF_BOARD_SETUP=y
 CONFIG_CONSOLE_MUX=y
 CONFIG_MISC_INIT_R=y
 # CONFIG_DISPLAY_CPUINFO is not set
-# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_DISPLAY_BOARDINFO=y
 # CONFIG_CMD_BDI is not set
 # CONFIG_CMD_IMI is not set
 CONFIG_CMD_GPIO=y
configs/s400_defconfig +0 -0
index 1bd4b71..6cd47d0 100644

configs/s400_defconfig CONFIG_NR_DRAM_BANKS=1 · line 16

Quoted 8 lines
configs/s400_defconfig +1 -1
@@ -10,7 +10,7 @@ CONFIG_NR_DRAM_BANKS=1
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_MISC_INIT_R=y
 # CONFIG_DISPLAY_CPUINFO is not set
-# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_DISPLAY_BOARDINFO=y
 # CONFIG_CMD_BDI is not set
 # CONFIG_CMD_IMI is not set
 CONFIG_CMD_GPIO=y

Looks good,

I will also update the p200 and p201 defconfig from Mohammad's patchset when applying, no need to resend for that.

I applied it to u-boot-amlogic and will run some tests.

Neil