Skip to contentSkip to conversation

rework feature enabling macros for compatibility

RFC PATCH Superseded Bruce Richardson 8 participants 82 messages Sep 16, 2020 – Oct 20, 2020 Page 1 of 3

Subsystems (10)
lore
Share & tools
lore
#0 lore raw

cover rework feature enabling macros for compatibility

As flagged previously on-list, there are a number of macros used to specify what libs and drivers are enabled in the build which differ from the equivalents used with make. This patchset is one possible approach to fixing these, but as part of the investigation some issues were hit where I'd like additional input to ensure we are ok with the approach taken in this set.

First, a problem statement:

* While the make build defines generally followed a pattern, there were many instances where the defines were unique. These can be seen in the values defined in patch 4.

* The NIC PMDs had two separate standards for the defines - some (the physical device drivers) tended to have the _PMD at the end of the macros, while the virtual drivers had it in the middle. Since the majority seemed to go with it at the end, meson chose this option. However, as can be seen from patch 4, a number now need special handling for compatibility

* This "_PMD" at the end made its way into other device classes, such as crypto and event, but it appears that the standard for these classes from make is in fact the opposite. Therefore we have had for the last 2+ years conflicting macros for crypto, compression and event classes.

* There is also the question of how important compatibility for these macros is, especially since we have had numerous incompatibilities without it being reported before. There is also the issue of the deprecation process for macros, since these are not part of any ABI.

What's done in this set:

* Firstly, and missing dependencies on apps or examples had to be fixed, where a dependency was missed because it was never needed due to the code being stripped out because of a missing macro.

* Secondly, since it is likely that use of the defines from make is more widespread than those from meson, the defines for the crypto, compression and event classes are changed to align with the make values. Just in case though, temporary code is added to drivers/meson.build to redefine the old meson values too, and a deprecation notice is added for these. The hope is that we can then remove this temporary code in the next release, leaving us with just one macro style for each driver class.

* Thirdly, we add an additional set of backward compatibility macros for the ~30 special-cases, where the meson macro template does not match that defined for make. Again, this is intended to be temporary and a deprecation notice is given for the macros in that file.

* Finally, we replace all instances of the old macros in the codebase with the newer versions. While the work done in the first four patches (steps 1-3 above) should be ok to backport, this final patch is not suitable for backporting. However, it is relatively simple to produce a new patch for backporting which allow either old or new values to be used in macros.

Open issues/considerations after this patch:

* We still have inconsistencies in our driver macro and naming templates. This is just a nice-to-have, but if people are ok with generally having a breakage in our macro defines, we could clean this up a lot further. Notice how 'net', 'regex' and 'vdpa' have '_PMD' at the end, while most others have it before the name. Notice also that many device classes have the class at the end of the template, while bbdev has it in the middle.

	$ git grep config_flag_fmt -- drivers/*/meson.build
	drivers/baseband/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_BBDEV_@0@'
	drivers/bus/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_BUS'
	drivers/common/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_COMMON'
	drivers/compress/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_@0@'
	drivers/crypto/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_@0@'
	drivers/event/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_@0@_EVENTDEV'
	drivers/mempool/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_MEMPOOL'
	drivers/net/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_PMD'
	drivers/raw/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_@0@_RAWDEV'
	drivers/regex/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_PMD'
	drivers/vdpa/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_PMD'

* Are we ok to remove the older macros after one release of deprecation, or do we need to wait to next API window.

* I have not made any changes to the docs for this, since I expect that these macros are already covered by the doc changes in the make removal set.

Reviews and comments welcome.

Bruce Richardson (5):
app: fix missing dependencies examples/l2fwd-crypto: fix missing dependency
meson: fix compatibility with make build defines
build: add defines for compatibility with make build
build: replace use of old build macros

 app/test-crypto-perf/meson.build     |   3 +
 app/test-pmd/cmdline.c               |   8 +-
 app/test-pmd/meson.build             |  12 +++
 app/test-pmd/parameters.c            |  12 +--
 app/test-pmd/testpmd.c               |  24 ++---
 app/test-pmd/testpmd.h               |   4 +-
 app/test/meson.build                 |   3 +
 app/test/test_eal_flags.c            |   4 +-
 config/meson.build                   |   3 +-
 config/rte_compatibility_defines.h   | 129 +++++++++++++++++++++++++++
 config/rte_config.h                  |   1 +
 doc/guides/rel_notes/deprecation.rst |  17 ++++
 drivers/compress/meson.build         |   2 +-
 drivers/crypto/meson.build           |   2 +-
 drivers/event/meson.build            |   2 +-
 drivers/meson.build                  |  15 ++++
 examples/l2fwd-crypto/meson.build    |   3 +
 17 files changed, 214 insertions(+), 30 deletions(-)
 create mode 100644 config/rte_compatibility_defines.h
Signature · 1 line
2.25.1
#1 lore raw

RFC PATCH 1/5 app: fix missing dependencies

A number of lib and driver dependencies for various apps were missed on build because the proper macro names for their use were mismatched between meson and make build systems. Before adding in equivalent compatibility macros we need to ensure to add the proper dependencies to ensure a valid build.

Fixes 16ade738fd0d ("app/testpmd: build with meson")
Fixes b5dc795a8a55 ("test: build app with meson as dpdk-test")
Fixes 996ef1176111 ("app: add all remaining apps to meson build")
---
 app/test-crypto-perf/meson.build |  3 +++
 app/test-pmd/meson.build         | 12 ++++++++++++
 app/test/meson.build             |  3 +++
 3 files changed, 18 insertions(+)
app/test-crypto-perf/meson.build +3 -0
index f394b75ba5..4bd71510dc 100644
@@ -12,3 +12,6 @@ sources = files('cperf_ops.c',
 		'cperf_test_verify.c',
 		'main.c')
 deps += ['cryptodev', 'net', 'security']
+if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER')
+	deps += 'pmd_crypto_scheduler'
+endif
app/test-pmd/meson.build +12 -0
index ea56e547bb..ed7dddec7b 100644
@@ -28,6 +28,18 @@ deps += ['ethdev', 'gro', 'gso', 'cmdline', 'metrics', 'meter', 'bus_pci']
 if dpdk_conf.has('RTE_LIBRTE_PDUMP')
 	deps += 'pdump'
 endif
+if dpdk_conf.has('RTE_LIBRTE_BITRATESTATS')
+	deps += 'bitratestats'
+endif
+if dpdk_conf.has('RTE_LIBRTE_LATENCYSTATS')
+	deps += 'latencystats'
+endif
+if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER')
+	deps += 'pmd_crypto_scheduler'
+endif
+if dpdk_conf.has('RTE_LIBRTE_BOND_PMD')
+	deps += 'pmd_bond'
+endif
 if dpdk_conf.has('RTE_LIBRTE_BNXT_PMD')
 	deps += 'pmd_bnxt'
 endif
app/test/meson.build +3 -0
index 786a213972..31e3de3724 100644
@@ -344,6 +344,9 @@ endif
 if dpdk_conf.has('RTE_LIBRTE_SKELETON_EVENTDEV_PMD')
 	test_deps += 'pmd_skeleton_event'
 endif
+if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER')
+	test_deps += 'pmd_crypto_scheduler'
+endif
 if dpdk_conf.has('RTE_LIBRTE_TELEMETRY')
 	test_sources += 'test_telemetry_json.c'
 	fast_tests += [['telemetry_json_autotest', true]]
Signature · 1 line
2.25.1
#2 lore raw

RFC PATCH 2/5 examples/l2fwd-crypto: fix missing dependency

In reply to Bruce Richardson

When the crypto-scheduler support is enabled, we were missing the dependency on it as part of the meson build.

Fixes 89f0711f9ddf ("examples: build some samples with meson")
---
 examples/l2fwd-crypto/meson.build | 3 +++
 1 file changed, 3 insertions(+)
examples/l2fwd-crypto/meson.build +3 -0
index 6c852ad199..39e1604fac 100644
@@ -7,6 +7,9 @@
 # DPDK instance, use 'make'
 
 deps += 'cryptodev'
+if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER')
+	deps += 'pmd_crypto_scheduler'
+endif
 allow_experimental_apis = true
 sources = files(
 	'main.c'
Signature · 1 line
2.25.1
#3 lore raw

RFC PATCH 3/5 meson: fix compatibility with make build defines

In reply to Bruce Richardson

The defines used to indicate what crypto, compression and eventdev drivers were being built were different to those used in the make build, with meson defining them with "_PMD" at the end, while make defined them with "_PMD" in the middle and the specific driver name at the end. This might cause compatibility issues for applications which used the older defines, which switching to build against new DPDK releases.

As well as changing the default to match that of make, meson also special-cases the crypto/compression/event drivers to have both defines provided, and puts in a deprecation notice to allow future removal of the meson-original defines. This ensures compatibility for these macros with both meson and make from older versions.

Fixes dcadbbde8e61 ("crypto/null: build with meson")
Fixes 3c32e89f68e1 ("compress/isal: add skeleton ISA-L compression PMD")
Fixes eca504f318db ("drivers/event: build skeleton and SW drivers with meson")
---
 doc/guides/rel_notes/deprecation.rst |  8 ++++++++
 drivers/compress/meson.build         |  2 +-
 drivers/crypto/meson.build           |  2 +-
 drivers/event/meson.build            |  2 +-
 drivers/meson.build                  | 15 +++++++++++++++
 5 files changed, 26 insertions(+), 3 deletions(-)
doc/guides/rel_notes/deprecation.rst +8 -0
index 52168f7751..5b5a52fa65 100644
@@ -11,6 +11,14 @@ here.
 Deprecation Notices
 -------------------
 
+* build: The macros defined to indicate which crypto drivers, event drivers
+  and which compression drivers have been
+  included in the meson build are changing format from
+  ``RTE_LIBRTE_<name>_PMD`` to ``RTE_LIBRTE_PMD_<name>`` to match those
+  macros used for the drivers in the make build. Both sets of macros
+  are present in this release, but those ending in ``_PMD`` will be removed
+  in a future release, and should not be used.
+
 * meson: The minimum supported version of meson for configuring and building
   DPDK will be increased to v0.47.1 (from 0.41) from DPDK 19.05 onwards. For
   those users with a version earlier than 0.47.1, an updated copy of meson
drivers/compress/meson.build +1 -1
index ee883c3f9f..bea1720a0b 100644
@@ -8,5 +8,5 @@ endif
 drivers = ['isal', 'octeontx', 'qat', 'zlib']
 
 std_deps = ['compressdev'] # compressdev pulls in all other needed deps
-config_flag_fmt = 'RTE_LIBRTE_@0@_PMD'
+config_flag_fmt = 'RTE_LIBRTE_PMD_@0@'
 driver_name_fmt = 'rte_pmd_@0@'
drivers/crypto/meson.build +1 -1
index a2423507ad..25b99c19cb 100644
@@ -26,5 +26,5 @@ drivers = ['aesni_gcm',
 	   'zuc']
 
 std_deps = ['cryptodev'] # cryptodev pulls in all other needed deps
-config_flag_fmt = 'RTE_LIBRTE_@0@_PMD'
+config_flag_fmt = 'RTE_LIBRTE_PMD_@0@'
 driver_name_fmt = 'rte_pmd_@0@'
drivers/event/meson.build +1 -1
index ebe76a75c4..f2a3431472 100644
@@ -11,5 +11,5 @@ if not (toolchain == 'gcc' and cc.version().version_compare('<4.8.6') and
 	drivers += 'octeontx'
 endif
 std_deps = ['eventdev', 'kvargs']
-config_flag_fmt = 'RTE_LIBRTE_@0@_EVENTDEV_PMD'
+config_flag_fmt = 'RTE_LIBRTE_PMD_@0@_EVENTDEV'
 driver_name_fmt = 'rte_pmd_@0@_event'
drivers/meson.build +15 -0
index 5f95265573..b5ac483d31 100644
@@ -117,6 +117,21 @@ foreach subpath:subdirs
 				fmt_name = name
 			endif
 			dpdk_conf.set(config_flag_fmt.format(fmt_name.to_upper()),1)
+			# for driver compatibility, since we changed the
+			# default to match that of make. Remove in future release
+			# after following deprecation process
+			if config_flag_fmt.contains('_PMD_@0@') and (class == 'crypto'
+					or class == 'compress'
+					or class == 'event')
+				alt_flag_fmt = '_@0@_PMD'.join(
+						config_flag_fmt.split('_PMD_@0@'))
+				if config_flag_fmt.contains('EVENTDEV')
+					alt_flag_fmt = '_@0@_EVENTDEV_PMD'.join(
+						config_flag_fmt.split('_PMD_@0@_EVENTDEV'))
+				endif
+				dpdk_conf.set(alt_flag_fmt.format(
+						fmt_name.to_upper()), 1)
+			endif
 			lib_name = driver_name_fmt.format(fmt_name)
 
 			dpdk_extra_ldflags += pkgconfig_extra_libs
Signature · 1 line
2.25.1
#4 lore raw

RFC PATCH 4/5 build: add defines for compatibility with make build

In reply to Bruce Richardson

While meson has standardized the names and macros used for the libraries and drivers in DPDK, the old macros used from the make system were not previously announced as deprecated. Therefore to ensure compatibility of apps being rebuilt, we add these defines back in when appropriate.

Fixes 5b9656b157d3 ("lib: build with meson")
Fixes 9314afb68a53 ("drivers: add infrastructure for meson build")
---
 config/meson.build                   |   3 +-
 config/rte_compatibility_defines.h   | 129 +++++++++++++++++++++++++++
 config/rte_config.h                  |   1 +
 doc/guides/rel_notes/deprecation.rst |   9 ++
 4 files changed, 141 insertions(+), 1 deletion(-)
 create mode 100644 config/rte_compatibility_defines.h
config/meson.build +2 -1
index 6996e5cbea..ef74cebaaa 100644
@@ -245,7 +245,8 @@ dpdk_conf.set('RTE_COMPILE_TIME_CPUFLAGS', ','.join(compile_time_cpuflags))
 # set the install path for the drivers
 dpdk_conf.set_quoted('RTE_EAL_PMD_PATH', eal_pmd_path)
 
-install_headers('rte_config.h', subdir: get_option('include_subdir_arch'))
+install_headers(['rte_config.h', 'rte_compatibility_defines.h'],
+		subdir: get_option('include_subdir_arch'))
 
 # enable VFIO only if it is linux OS
 dpdk_conf.set('RTE_EAL_VFIO', is_linux)
config/rte_compatibility_defines.h new file +129 -0

129 lines not on this page · raw message

config/rte_config.h +1 -0
index 0bae630fd9..cacc1837cf 100644
@@ -13,6 +13,7 @@
 #define _RTE_CONFIG_H_
 
 #include <rte_build_config.h>
+#include <rte_compatibility_defines.h>
 
 /* legacy defines */
 #ifdef RTE_EXEC_ENV_LINUX
doc/guides/rel_notes/deprecation.rst +9 -0
index 5b5a52fa65..fe1b988bb8 100644
@@ -19,6 +19,15 @@ Deprecation Notices
   are present in this release, but those ending in ``_PMD`` will be removed
   in a future release, and should not be used.
 
+* build: A number of macros, which defined what DPDK components were being
+  built, are deprecated due to them not conforming to the standard naming
+  scheme for the relevant library template or driver class template. These
+  deprecated macros can be found in the file
+  ``config/rte_compatibility_defines.h``, listed in the format ``#ifdef
+  <NEW_DEFINE> \ #define <OLD_DEFINE> \ #endif``. When updating code,
+  ``OLD_DEFINE`` should be replaced with the relevant ``NEW_DEFINE`` from
+  that file.
+
 * meson: The minimum supported version of meson for configuring and building
   DPDK will be increased to v0.47.1 (from 0.41) from DPDK 19.05 onwards. For
   those users with a version earlier than 0.47.1, an updated copy of meson
Signature · 1 line
2.25.1
#5 lore raw

RFC PATCH 5/5 build: replace use of old build macros

In reply to Bruce Richardson

Use the newer macros defined by meson in all DPDK source code, to ensure there are no errors when the old non-standard macros are removed.

---
NOTE: this patch is not suitable for backporting, but a new patch for this issue can be done for older releases if the other patches on this set are accepted and backported.

---
 app/test-pmd/cmdline.c    |  8 ++++----
 app/test-pmd/parameters.c | 12 ++++++------
 app/test-pmd/testpmd.c    | 24 ++++++++++++------------
 app/test-pmd/testpmd.h    |  4 ++--
 app/test/test_eal_flags.c |  4 ++--
 5 files changed, 26 insertions(+), 26 deletions(-)
app/test-pmd/cmdline.c +4 -4
index 0a6ed85f33..9ca052a1b9 100644
@@ -50,7 +50,7 @@
 #include <cmdline_parse_etheraddr.h>
 #include <cmdline_socket.h>
 #include <cmdline.h>
-#ifdef RTE_LIBRTE_PMD_BOND
+#ifdef RTE_LIBRTE_BOND_PMD
 #include <rte_eth_bond.h>
 #include <rte_eth_bond_8023ad.h>
 #endif
@@ -597,7 +597,7 @@ static void cmd_help_long_parsed(void *parsed_result,
 			"   Show the bypass configuration for a bypass enabled NIC"
 			" using the lowest port on the NIC.\n\n"
 
-#ifdef RTE_LIBRTE_PMD_BOND
+#ifdef RTE_LIBRTE_BOND_PMD
 			"create bonded device (mode) (socket)\n"
 			"	Create a new bonded device with specific bonding mode and socket.\n\n"
 
@@ -5732,7 +5732,7 @@ cmdline_parse_inst_t cmd_show_bypass_config = {
 	},
 };
 
-#ifdef RTE_LIBRTE_PMD_BOND
+#ifdef RTE_LIBRTE_BOND_PMD
 /* *** SET BONDING MODE *** */
 struct cmd_set_bonding_mode_result {
 	cmdline_fixed_string_t set;
@@ -19430,7 +19430,7 @@ cmdline_parse_ctx_t main_ctx[] = {
 	(cmdline_parse_inst_t *)&cmd_set_bypass_event,
 	(cmdline_parse_inst_t *)&cmd_set_bypass_timeout,
 	(cmdline_parse_inst_t *)&cmd_show_bypass_config,
-#ifdef RTE_LIBRTE_PMD_BOND
+#ifdef RTE_LIBRTE_BOND_PMD
 	(cmdline_parse_inst_t *) &cmd_set_bonding_mode,
 	(cmdline_parse_inst_t *) &cmd_show_bonding_config,
 	(cmdline_parse_inst_t *) &cmd_set_bonding_primary,
app/test-pmd/parameters.c +6 -6
index 7cb0e3d6ec..4f6f6a34f1 100644
@@ -39,7 +39,7 @@
 #include <rte_ether.h>
 #include <rte_ethdev.h>
 #include <rte_string_fns.h>
-#ifdef RTE_LIBRTE_PMD_BOND
+#ifdef RTE_LIBRTE_BOND_PMD
 #include <rte_eth_bond.h>
 #endif
 #include <rte_flow.h>
@@ -128,7 +128,7 @@ usage(char* progname)
 	       "the packet will be enqueued into the rx drop-queue. "
 	       "If the drop-queue doesn't exist, the packet is dropped. "
 	       "By default drop-queue=127.\n");
-#ifdef RTE_LIBRTE_LATENCY_STATS
+#ifdef RTE_LIBRTE_LATENCYSTATS
 	printf("  --latencystats=N: enable latency and jitter statistcs "
 	       "monitoring on forwarding lcore id N.\n");
 #endif
@@ -610,10 +610,10 @@ launch_args_parse(int argc, char** argv)
 		{ "pkt-filter-report-hash",     1, 0, 0 },
 		{ "pkt-filter-size",            1, 0, 0 },
 		{ "pkt-filter-drop-queue",      1, 0, 0 },
-#ifdef RTE_LIBRTE_LATENCY_STATS
+#ifdef RTE_LIBRTE_LATENCYSTATS
 		{ "latencystats",               1, 0, 0 },
 #endif
-#ifdef RTE_LIBRTE_BITRATE
+#ifdef RTE_LIBRTE_BITRATESTATS
 		{ "bitrate-stats",              1, 0, 0 },
 #endif
 		{ "disable-crc-strip",          0, 0, 0 },
@@ -973,7 +973,7 @@ launch_args_parse(int argc, char** argv)
 						 "drop queue %d invalid - must"
 						 "be >= 0 \n", n);
 			}
-#ifdef RTE_LIBRTE_LATENCY_STATS
+#ifdef RTE_LIBRTE_LATENCYSTATS
 			if (!strcmp(lgopts[opt_idx].name,
 				    "latencystats")) {
 				n = atoi(optarg);
@@ -986,7 +986,7 @@ launch_args_parse(int argc, char** argv)
 						 " must be >= 0\n", n);
 			}
 #endif
-#ifdef RTE_LIBRTE_BITRATE
+#ifdef RTE_LIBRTE_BITRATESTATS
 			if (!strcmp(lgopts[opt_idx].name, "bitrate-stats")) {
 				n = atoi(optarg);
 				if (n >= 0) {
app/test-pmd/testpmd.c +12 -12
index 7842c3b781..68a6c979b6 100644
@@ -54,10 +54,10 @@
 #endif
 #include <rte_flow.h>
 #include <rte_metrics.h>
-#ifdef RTE_LIBRTE_BITRATE
+#ifdef RTE_LIBRTE_BITRATESTATS
 #include <rte_bitrate.h>
 #endif
-#ifdef RTE_LIBRTE_LATENCY_STATS
+#ifdef RTE_LIBRTE_LATENCYSTATS
 #include <rte_latencystats.h>
 #endif
 
@@ -410,7 +410,7 @@ uint32_t bypass_timeout = RTE_PMD_IXGBE_BYPASS_TMT_OFF;
 #endif
 
 
-#ifdef RTE_LIBRTE_LATENCY_STATS
+#ifdef RTE_LIBRTE_LATENCYSTATS
 
 /*
  * Set when latency stats is enabled in the commandline
@@ -478,7 +478,7 @@ uint8_t xstats_hide_zero;
 unsigned int num_sockets = 0;
 unsigned int socket_ids[RTE_MAX_NUMA_NODES];
 
-#ifdef RTE_LIBRTE_BITRATE
+#ifdef RTE_LIBRTE_BITRATESTATS
 /* Bitrate statistics */
 struct rte_stats_bitrates *bitrate_data;
 lcoreid_t bitrate_lcore_id;
@@ -2063,7 +2063,7 @@ run_pkt_fwd_on_lcore(struct fwd_lcore *fc, packet_fwd_t pkt_fwd)
 	struct fwd_stream **fsm;
 	streamid_t nb_fs;
 	streamid_t sm_id;
-#ifdef RTE_LIBRTE_BITRATE
+#ifdef RTE_LIBRTE_BITRATESTATS
 	uint64_t tics_per_1sec;
 	uint64_t tics_datum;
 	uint64_t tics_current;
@@ -2078,7 +2078,7 @@ run_pkt_fwd_on_lcore(struct fwd_lcore *fc, packet_fwd_t pkt_fwd)
 	do {
 		for (sm_id = 0; sm_id < nb_fs; sm_id++)
 			(*pkt_fwd)(fsm[sm_id]);
-#ifdef RTE_LIBRTE_BITRATE
+#ifdef RTE_LIBRTE_BITRATESTATS
 		if (bitrate_enabled != 0 &&
 				bitrate_lcore_id == rte_lcore_id()) {
 			tics_current = rte_rdtsc();
@@ -2091,7 +2091,7 @@ run_pkt_fwd_on_lcore(struct fwd_lcore *fc, packet_fwd_t pkt_fwd)
 			}
 		}
 #endif
-#ifdef RTE_LIBRTE_LATENCY_STATS
+#ifdef RTE_LIBRTE_LATENCYSTATS
 		if (latencystats_enabled != 0 &&
 				latencystats_lcore_id == rte_lcore_id())
 			rte_latencystats_update();
@@ -3641,7 +3641,7 @@ signal_handler(int signum)
 		/* uninitialize packet capture framework */
 		rte_pdump_uninit();
 #endif
-#ifdef RTE_LIBRTE_LATENCY_STATS
+#ifdef RTE_LIBRTE_LATENCYSTATS
 		if (latencystats_enabled != 0)
 			rte_latencystats_uninit();
 #endif
@@ -3706,10 +3706,10 @@ main(int argc, char** argv)
 			 "Check the core mask argument\n");
 
 	/* Bitrate/latency stats disabled by default */
-#ifdef RTE_LIBRTE_BITRATE
+#ifdef RTE_LIBRTE_BITRATESTATS
 	bitrate_enabled = 0;
 #endif
-#ifdef RTE_LIBRTE_LATENCY_STATS
+#ifdef RTE_LIBRTE_LATENCYSTATS
 	latencystats_enabled = 0;
 #endif
 
@@ -3788,7 +3788,7 @@ main(int argc, char** argv)
 	/* Init metrics library */
 	rte_metrics_init(rte_socket_id());
 
-#ifdef RTE_LIBRTE_LATENCY_STATS
+#ifdef RTE_LIBRTE_LATENCYSTATS
 	if (latencystats_enabled != 0) {
 		int ret = rte_latencystats_init(1, NULL);
 		if (ret)
@@ -3800,7 +3800,7 @@ main(int argc, char** argv)
 #endif
 
 	/* Setup bitrate stats */
-#ifdef RTE_LIBRTE_BITRATE
+#ifdef RTE_LIBRTE_BITRATESTATS
 	if (bitrate_enabled != 0) {
 		bitrate_data = rte_stats_bitrate_create();
 		if (bitrate_data == NULL)
app/test-pmd/testpmd.h +2 -2
index 25a12b14f2..54d616ca75 100644
@@ -402,12 +402,12 @@ extern uint32_t param_total_num_mbufs;
 
 extern uint16_t stats_period;
 
-#ifdef RTE_LIBRTE_LATENCY_STATS
+#ifdef RTE_LIBRTE_LATENCYSTATS
 extern uint8_t latencystats_enabled;
 extern lcoreid_t latencystats_lcore_id;
 #endif
 
-#ifdef RTE_LIBRTE_BITRATE
+#ifdef RTE_LIBRTE_BITRATESTATS
 extern lcoreid_t bitrate_lcore_id;
 extern uint8_t bitrate_enabled;
 #endif
app/test/test_eal_flags.c +2 -2
index b019656b29..867b91bc24 100644
@@ -344,7 +344,7 @@ test_invalid_b_flag(void)
 static int
 test_invalid_vdev_flag(void)
 {
-#ifdef RTE_LIBRTE_PMD_RING
+#ifdef RTE_LIBRTE_RING_PMD
 #ifdef RTE_EXEC_ENV_FREEBSD
 	/* BSD target doesn't support prefixes at this point, and we also need to
 	 * run another primary process here */
@@ -1504,7 +1504,7 @@ test_eal_flags(void)
 		return ret;
 	}
 
-#ifdef RTE_LIBRTE_PMD_RING
+#ifdef RTE_LIBRTE_RING_PMD
 	ret = test_invalid_vdev_flag();
 	if (ret < 0) {
 		printf("Error in test_invalid_vdev_flag()\n");
Signature · 1 line
2.25.1
#6 lore raw
In reply to Bruce Richardson
Quoted 64 lines · Bruce Richardson

As flagged previously on-list, there are a number of macros used to specify what libs and drivers are enabled in the build which differ from the equivalents used with make. This patchset is one possible approach to fixing these, but as part of the investigation some issues were hit where I'd like additional input to ensure we are ok with the approach taken in this set.

First, a problem statement:

* While the make build defines generally followed a pattern, there were many instances where the defines were unique. These can be seen in the values defined in patch 4.

* The NIC PMDs had two separate standards for the defines - some (the physical device drivers) tended to have the _PMD at the end of the macros, while the virtual drivers had it in the middle. Since the majority seemed to go with it at the end, meson chose this option. However, as can be seen from patch 4, a number now need special handling for compatibility

* This "_PMD" at the end made its way into other device classes, such as crypto and event, but it appears that the standard for these classes from make is in fact the opposite. Therefore we have had for the last 2+ years conflicting macros for crypto, compression and event classes.

* There is also the question of how important compatibility for these macros is, especially since we have had numerous incompatibilities without it being reported before. There is also the issue of the deprecation process for macros, since these are not part of any ABI.

What's done in this set:

* Firstly, and missing dependencies on apps or examples had to be fixed, where a dependency was missed because it was never needed due to the code being stripped out because of a missing macro.

* Secondly, since it is likely that use of the defines from make is more widespread than those from meson, the defines for the crypto, compression and event classes are changed to align with the make values. Just in case though, temporary code is added to drivers/meson.build to redefine the old meson values too, and a deprecation notice is added for these. The hope is that we can then remove this temporary code in the next release, leaving us with just one macro style for each driver class.

* Thirdly, we add an additional set of backward compatibility macros for the ~30 special-cases, where the meson macro template does not match that defined for make. Again, this is intended to be temporary and a deprecation notice is given for the macros in that file.

* Finally, we replace all instances of the old macros in the codebase with the newer versions. While the work done in the first four patches (steps 1-3 above) should be ok to backport, this final patch is not suitable for backporting. However, it is relatively simple to produce a new patch for backporting which allow either old or new values to be used in macros.

Open issues/considerations after this patch:

* We still have inconsistencies in our driver macro and naming templates. This is just a nice-to-have, but if people are ok with generally having a breakage in our macro defines, we could clean this up a lot further. Notice how 'net', 'regex' and 'vdpa' have '_PMD' at the end, while most others have it before the name. Notice also that many device classes have the class at the end of the template, while bbdev has it in the middle.

Quoted 12 lines
	$ git grep config_flag_fmt -- drivers/*/meson.build
	drivers/baseband/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_BBDEV_@0@'
	drivers/bus/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_BUS'
	drivers/common/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_COMMON'
	drivers/compress/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_@0@'
	drivers/crypto/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_@0@'
	drivers/event/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_@0@_EVENTDEV'
	drivers/mempool/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_MEMPOOL'
	drivers/net/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_PMD'
	drivers/raw/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_@0@_RAWDEV'
	drivers/regex/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_PMD'
	drivers/vdpa/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_PMD'

As a generic direction I would vote for standard names which are based on directory structure:
- RTE_LIBRTE_ETHDEV
- RTE_DRIVER_NET_SFC
- RTE_DRIVER_COMMON_MLX5
- RTE_DRIVER_BUS_PCI

Quoted 36 lines

* Are we ok to remove the older macros after one release of deprecation, or do we need to wait to next API window.

* I have not made any changes to the docs for this, since I expect that these macros are already covered by the doc changes in the make removal set.

Reviews and comments welcome.

Bruce Richardson (5):
app: fix missing dependencies examples/l2fwd-crypto: fix missing dependency
meson: fix compatibility with make build defines
build: add defines for compatibility with make build
build: replace use of old build macros

  app/test-crypto-perf/meson.build     |   3 +
  app/test-pmd/cmdline.c               |   8 +-
  app/test-pmd/meson.build             |  12 +++
  app/test-pmd/parameters.c            |  12 +--
  app/test-pmd/testpmd.c               |  24 ++---
  app/test-pmd/testpmd.h               |   4 +-
  app/test/meson.build                 |   3 +
  app/test/test_eal_flags.c            |   4 +-
  config/meson.build                   |   3 +-
  config/rte_compatibility_defines.h   | 129 +++++++++++++++++++++++++++
  config/rte_config.h                  |   1 +
  doc/guides/rel_notes/deprecation.rst |  17 ++++
  drivers/compress/meson.build         |   2 +-
  drivers/crypto/meson.build           |   2 +-
  drivers/event/meson.build            |   2 +-
  drivers/meson.build                  |  15 ++++
  examples/l2fwd-crypto/meson.build    |   3 +
  17 files changed, 214 insertions(+), 30 deletions(-)

create mode 100644 config/rte_compatibility_defines.h

#7 lore raw
Quoted 78 lines · Andrew Rybchenko
Quoted 64 lines · Bruce Richardson

As flagged previously on-list, there are a number of macros used to specify what libs and drivers are enabled in the build which differ from the equivalents used with make. This patchset is one possible approach to fixing these, but as part of the investigation some issues were hit where I'd like additional input to ensure we are ok with the approach taken in this set.

First, a problem statement:

* While the make build defines generally followed a pattern, there were many instances where the defines were unique. These can be seen in the values defined in patch 4.

* The NIC PMDs had two separate standards for the defines - some (the physical device drivers) tended to have the _PMD at the end of the macros, while the virtual drivers had it in the middle. Since the majority seemed to go with it at the end, meson chose this option. However, as can be seen from patch 4, a number now need special handling for compatibility

* This "_PMD" at the end made its way into other device classes, such as crypto and event, but it appears that the standard for these classes from make is in fact the opposite. Therefore we have had for the last 2+ years conflicting macros for crypto, compression and event classes.

* There is also the question of how important compatibility for these macros is, especially since we have had numerous incompatibilities without it being reported before. There is also the issue of the deprecation process for macros, since these are not part of any ABI.

What's done in this set:

* Firstly, and missing dependencies on apps or examples had to be fixed, where a dependency was missed because it was never needed due to the code being stripped out because of a missing macro.

* Secondly, since it is likely that use of the defines from make is more widespread than those from meson, the defines for the crypto, compression and event classes are changed to align with the make values. Just in case though, temporary code is added to drivers/meson.build to redefine the old meson values too, and a deprecation notice is added for these. The hope is that we can then remove this temporary code in the next release, leaving us with just one macro style for each driver class.

* Thirdly, we add an additional set of backward compatibility macros for the ~30 special-cases, where the meson macro template does not match that defined for make. Again, this is intended to be temporary and a deprecation notice is given for the macros in that file.

* Finally, we replace all instances of the old macros in the codebase with the newer versions. While the work done in the first four patches (steps 1-3 above) should be ok to backport, this final patch is not suitable for backporting. However, it is relatively simple to produce a new patch for backporting which allow either old or new values to be used in macros.

Open issues/considerations after this patch:

* We still have inconsistencies in our driver macro and naming templates. This is just a nice-to-have, but if people are ok with generally having a breakage in our macro defines, we could clean this up a lot further. Notice how 'net', 'regex' and 'vdpa' have '_PMD' at the end, while most others have it before the name. Notice also that many device classes have the class at the end of the template, while bbdev has it in the middle.

Quoted 12 lines
	$ git grep config_flag_fmt -- drivers/*/meson.build
	drivers/baseband/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_BBDEV_@0@'
	drivers/bus/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_BUS'
	drivers/common/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_COMMON'
	drivers/compress/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_@0@'
	drivers/crypto/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_@0@'
	drivers/event/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_@0@_EVENTDEV'
	drivers/mempool/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_MEMPOOL'
	drivers/net/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_PMD'
	drivers/raw/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_@0@_RAWDEV'
	drivers/regex/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_PMD'
	drivers/vdpa/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_PMD'
Quoted 7 lines

As a generic direction I would vote for standard names which are based on directory structure:
- RTE_LIBRTE_ETHDEV
- RTE_DRIVER_NET_SFC
- RTE_DRIVER_COMMON_MLX5
- RTE_DRIVER_BUS_PCI

Definite +1, and it would be good if we standardized the .so names like that too.

The open question is how much backward compatibility needs to be maintained for macros (and also too for .so names)? With this patchset, I've aimed very much to keep strict compatibility for now.

#8 lore raw
Quoted 87 lines · Bruce Richardson
Quoted 78 lines · Andrew Rybchenko
Quoted 64 lines · Bruce Richardson

As flagged previously on-list, there are a number of macros used to specify what libs and drivers are enabled in the build which differ from the equivalents used with make. This patchset is one possible approach to fixing these, but as part of the investigation some issues were hit where I'd like additional input to ensure we are ok with the approach taken in this set.

First, a problem statement:

* While the make build defines generally followed a pattern, there were many instances where the defines were unique. These can be seen in the values defined in patch 4.

* The NIC PMDs had two separate standards for the defines - some (the physical device drivers) tended to have the _PMD at the end of the macros, while the virtual drivers had it in the middle. Since the majority seemed to go with it at the end, meson chose this option. However, as can be seen from patch 4, a number now need special handling for compatibility

* This "_PMD" at the end made its way into other device classes, such as crypto and event, but it appears that the standard for these classes from make is in fact the opposite. Therefore we have had for the last 2+ years conflicting macros for crypto, compression and event classes.

* There is also the question of how important compatibility for these macros is, especially since we have had numerous incompatibilities without it being reported before. There is also the issue of the deprecation process for macros, since these are not part of any ABI.

What's done in this set:

* Firstly, and missing dependencies on apps or examples had to be fixed, where a dependency was missed because it was never needed due to the code being stripped out because of a missing macro.

* Secondly, since it is likely that use of the defines from make is more widespread than those from meson, the defines for the crypto, compression and event classes are changed to align with the make values. Just in case though, temporary code is added to drivers/meson.build to redefine the old meson values too, and a deprecation notice is added for these. The hope is that we can then remove this temporary code in the next release, leaving us with just one macro style for each driver class.

* Thirdly, we add an additional set of backward compatibility macros for the ~30 special-cases, where the meson macro template does not match that defined for make. Again, this is intended to be temporary and a deprecation notice is given for the macros in that file.

* Finally, we replace all instances of the old macros in the codebase with the newer versions. While the work done in the first four patches (steps 1-3 above) should be ok to backport, this final patch is not suitable for backporting. However, it is relatively simple to produce a new patch for backporting which allow either old or new values to be used in macros.

Open issues/considerations after this patch:

* We still have inconsistencies in our driver macro and naming templates. This is just a nice-to-have, but if people are ok with generally having a breakage in our macro defines, we could clean this up a lot further. Notice how 'net', 'regex' and 'vdpa' have '_PMD' at the end, while most others have it before the name. Notice also that many device classes have the class at the end of the template, while bbdev has it in the middle.

Quoted 12 lines
	$ git grep config_flag_fmt -- drivers/*/meson.build
	drivers/baseband/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_BBDEV_@0@'
	drivers/bus/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_BUS'
	drivers/common/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_COMMON'
	drivers/compress/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_@0@'
	drivers/crypto/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_@0@'
	drivers/event/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_@0@_EVENTDEV'
	drivers/mempool/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_MEMPOOL'
	drivers/net/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_PMD'
	drivers/raw/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_@0@_RAWDEV'
	drivers/regex/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_PMD'
	drivers/vdpa/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_PMD'
Quoted 7 lines

As a generic direction I would vote for standard names which are based on directory structure:
- RTE_LIBRTE_ETHDEV
- RTE_DRIVER_NET_SFC
- RTE_DRIVER_COMMON_MLX5
- RTE_DRIVER_BUS_PCI

Quoted 6 lines

Definite +1, and it would be good if we standardized the .so names like that too.

The open question is how much backward compatibility needs to be maintained for macros (and also too for .so names)? With this patchset, I've aimed very much to keep strict compatibility for now.

I think it is really good. Technically it does not look hard to provide backward compatibility for macros, so I'd keep it up to but not including 21.11 (next LTS?). Same for .so names, if it is not a problem.

If we approve the decision on naming, all new entities must follow it from the very beginning.

#9 lore raw
Quoted 95 lines · Andrew Rybchenko
Quoted 87 lines · Bruce Richardson
Quoted 78 lines · Andrew Rybchenko
Quoted 68 lines · Bruce Richardson

As flagged previously on-list, there are a number of macros used to specify what libs and drivers are enabled in the build which differ from the equivalents used with make. This patchset is one possible approach to fixing these, but as part of the investigation some issues were hit where I'd like additional input to ensure we are ok with the approach taken in this set.

First, a problem statement:

* While the make build defines generally followed a pattern, there were many instances where the defines were unique. These can be seen in the values defined in patch 4.

* The NIC PMDs had two separate standards for the defines - some (the physical device drivers) tended to have the _PMD at the end of the macros, while the virtual drivers had it in the middle. Since the majority seemed to go with it at the end, meson chose this option. However, as can be seen from patch 4, a number now need special handling for compatibility

* This "_PMD" at the end made its way into other device classes, such as crypto and event, but it appears that the standard for these classes from make is in fact the opposite. Therefore we have had for the last 2+ years conflicting macros for crypto, compression and event classes.

* There is also the question of how important compatibility for these macros is, especially since we have had numerous incompatibilities without it being reported before. There is also the issue of the deprecation process for macros, since these are not part of any ABI.

What's done in this set:

* Firstly, and missing dependencies on apps or examples had to be fixed, where a dependency was missed because it was never needed due to the code being stripped out because of a missing macro.

* Secondly, since it is likely that use of the defines from make is more widespread than those from meson, the defines for the crypto, compression and event classes are changed to align with the make values. Just in case though, temporary code is added to drivers/meson.build to redefine the old meson values too, and a deprecation notice is added for these. The hope is that we can then remove this temporary code in the next release, leaving us with just one macro style for each driver class.

* Thirdly, we add an additional set of backward compatibility macros for the ~30 special-cases, where the meson macro template does not match that defined for make. Again, this is intended to be temporary and a deprecation notice is given for the macros in that file.

* Finally, we replace all instances of the old macros in the codebase with the newer versions. While the work done in the first four patches (steps 1-3 above) should be ok to backport, this final patch is not suitable for backporting. However, it is relatively simple to produce a new patch for backporting which allow either old or new values to be used in macros.

Open issues/considerations after this patch:

* We still have inconsistencies in our driver macro and naming templates. This is just a nice-to-have, but if people are ok with generally having a breakage in our macro defines, we could clean this up a lot further. Notice how 'net', 'regex' and 'vdpa' have '_PMD' at the end, while most others have it before the name. Notice also that many device classes have the class at the end of the template, while bbdev has it in the middle. $ git grep config_flag_fmt -- drivers/*/meson.build drivers/baseband/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_BBDEV_@0@' drivers/bus/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_BUS' drivers/common/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_COMMON'

Quoted 8 lines

drivers/compress/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_@0@' drivers/crypto/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_@0@' drivers/event/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_@0@_EVENTDEV' drivers/mempool/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_MEMPOOL' drivers/net/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_PMD' drivers/raw/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_@0@_RAWDEV' drivers/regex/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_PMD' drivers/vdpa/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_PMD'

Quoted 7 lines

As a generic direction I would vote for standard names which are based on directory structure:
- RTE_LIBRTE_ETHDEV
- RTE_DRIVER_NET_SFC
- RTE_DRIVER_COMMON_MLX5
- RTE_DRIVER_BUS_PCI

Quoted 6 lines

Definite +1, and it would be good if we standardized the .so names like that too.

The open question is how much backward compatibility needs to be maintained for macros (and also too for .so names)? With this patchset, I've aimed very much to keep strict compatibility for now.

Quoted 8 lines

I think it is really good. Technically it does not look hard to provide backward compatibility for macros, so I'd keep it up to but not including 21.11 (next LTS?). Same for .so names, if it is not a problem.

If we approve the decision on naming, all new entities must follow it from the very beginning.

+1

#10 lore raw
In reply to Bruce Richardson

18/09/2020 10:41, Bruce Richardson:

Quoted 21 lines · Andrew Rybchenko
Quoted 20 lines · Bruce Richardson
Quoted 18 lines

* We still have inconsistencies in our driver macro and naming templates. This is just a nice-to-have, but if people are ok with generally having a breakage in our macro defines, we could clean this up a lot further. Notice how 'net', 'regex' and 'vdpa' have '_PMD' at the end, while most others have it before the name. Notice also that many device classes have the class at the end of the template, while bbdev has it in the middle.

	$ git grep config_flag_fmt -- drivers/*/meson.build
	drivers/baseband/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_BBDEV_@0@'
	drivers/bus/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_BUS'
	drivers/common/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_COMMON'
	drivers/compress/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_@0@'
	drivers/crypto/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_@0@'
	drivers/event/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_@0@_EVENTDEV'
	drivers/mempool/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_MEMPOOL'
	drivers/net/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_PMD'
	drivers/raw/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_@0@_RAWDEV'
	drivers/regex/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_PMD'
	drivers/vdpa/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_PMD'
Quoted 6 lines
Quoted 6 lines

As a generic direction I would vote for standard names which are based on directory structure:
- RTE_LIBRTE_ETHDEV
- RTE_DRIVER_NET_SFC
- RTE_DRIVER_COMMON_MLX5
- RTE_DRIVER_BUS_PCI

I would prefer RTE_LIB_ETHDEV (instead of LIBRTE). If we plan to rework all flags, I would even prefer
- DPDK_LIB_ETHDEV
- DPDK_DRIVER_BUS_PCI

Quoted 2 lines

Definite +1, and it would be good if we standardized the .so names like that too.

+1 to align .so names for clarity.

Quoted 3 lines

The open question is how much backward compatibility needs to be maintained for macros (and also too for .so names)? With this patchset, I've aimed very much to keep strict compatibility for now.

As David said, the compatibility is mostly for apps using driver-specific API. We could also consider that the compatibility break was announced as part of the makefile removal.
In any case, it is not ABI sensitive, so no need to wait 21.11. If choosing between a compilation flag breakage in 21.02 or 20.11, I would prefer 20.11 where legacy build system is removed.

About LTS, we may want to have some patches targetted to 18.11 and 19.11, to allow a transparent switch between make and meson.

#11 lore raw
Quoted 56 lines

-----Original Message-----
From: Thomas Monjalon <[email protected]>
Sent: Wednesday, September 23, 2020 1:46 PM
To: Richardson, Bruce <[email protected]>
Cc: Andrew Rybchenko <[email protected]>; [email protected]; [email protected]; Yigit, Ferruh <[email protected]>
Subject: Re: [dpdk-dev] [RFC PATCH 0/5] rework feature enabling macros for compatibility

18/09/2020 10:41, Bruce Richardson:

Quoted 3 lines · Andrew Rybchenko
Quoted 2 lines · Bruce Richardson
Quoted 1 line

* We still have inconsistencies in our driver macro and naming

templates.

Quoted 1 line
Quoted 1 line
Quoted 1 line

This is just a nice-to-have, but if people are ok with generally

having a

Quoted 1 line
Quoted 1 line
Quoted 1 line

breakage in our macro defines, we could clean this up a lot

further.

Quoted 1 line
Quoted 1 line
Quoted 1 line

Notice how 'net', 'regex' and 'vdpa' have '_PMD' at the end,

while most

Quoted 1 line
Quoted 1 line
Quoted 1 line

others have it before the name. Notice also that many device

classes have

Quoted 1 line
Quoted 1 line
Quoted 1 line

the class at the end of the template, while bbdev has it in the

middle.

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
	$ git grep config_flag_fmt -- drivers/*/meson.build
	drivers/baseband/meson.build:config_flag_fmt =

'RTE_LIBRTE_PMD_BBDEV_@0@'

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

drivers/bus/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_BUS' drivers/common/meson.build:config_flag_fmt =

'RTE_LIBRTE_@0@_COMMON'

Quoted 1 line
Quoted 1 line
Quoted 1 line

drivers/compress/meson.build:config_flag_fmt =

'RTE_LIBRTE_PMD_@0@'

Quoted 1 line
Quoted 1 line
Quoted 1 line

drivers/crypto/meson.build:config_flag_fmt =

'RTE_LIBRTE_PMD_@0@'

Quoted 1 line
Quoted 1 line
Quoted 1 line

drivers/event/meson.build:config_flag_fmt =

'RTE_LIBRTE_PMD_@0@_EVENTDEV'

Quoted 1 line
Quoted 1 line
Quoted 1 line

drivers/mempool/meson.build:config_flag_fmt =

'RTE_LIBRTE_@0@_MEMPOOL'

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

drivers/net/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_PMD' drivers/raw/meson.build:config_flag_fmt =

'RTE_LIBRTE_PMD_@0@_RAWDEV'

Quoted 1 line
Quoted 1 line
Quoted 1 line

drivers/regex/meson.build:config_flag_fmt =

'RTE_LIBRTE_@0@_PMD'

Quoted 1 line
Quoted 1 line
Quoted 1 line

drivers/vdpa/meson.build:config_flag_fmt =

'RTE_LIBRTE_@0@_PMD'

Quoted 7 lines
Quoted 7 lines

As a generic direction I would vote for standard names which are based on directory structure:
- RTE_LIBRTE_ETHDEV
- RTE_DRIVER_NET_SFC
- RTE_DRIVER_COMMON_MLX5
- RTE_DRIVER_BUS_PCI

Quoted 4 lines

I would prefer RTE_LIB_ETHDEV (instead of LIBRTE). If we plan to rework all flags, I would even prefer
- DPDK_LIB_ETHDEV
- DPDK_DRIVER_BUS_PCI

Since everything else in DPDK uses an RTE prefix, I think it might be sensible to keep that here too:

* RTE_LIB_ETHDEV
* RTE_PMD_BUS_PCI
* RTE_PMD_NET_IXGBE
* RTE_PMD_CRYPTO_KASUMI
etc.

Quoted 5 lines
Quoted 2 lines

Definite +1, and it would be good if we standardized the .so names like that too.

+1 to align .so names for clarity.

I'd really like this, but need to see the implications for any drivers which may be multi-function, like QAT which has a single .so file.

Quoted 13 lines
Quoted 1 line

The open question is how much backward compatibility needs to be

maintained

Quoted 2 lines

for macros (and also too for .so names)? With this patchset, I've aimed very much to keep strict compatibility for now.

As David said, the compatibility is mostly for apps using driver-specific API.
We could also consider that the compatibility break was announced as part of the makefile removal.
In any case, it is not ABI sensitive, so no need to wait 21.11. If choosing between a compilation flag breakage in 21.02 or 20.11, I would prefer 20.11 where legacy build system is removed.

Quoted 3 lines

About LTS, we may want to have some patches targetted to 18.11 and 19.11, to allow a transparent switch between make and meson.

Any more thoughts on this?
Any change to standardize the library names is going to have to be done in 20.11 if it's to be done at all, since that would be an ABI break. I'd tend towards only changing the defines for 21.02, but if lots of other things are changing too, perhaps it's not worthwhile waiting.

/Bruce

#12 lore raw

30/09/2020 18:49, Richardson, Bruce:

Quoted 45 lines

From: Thomas Monjalon <[email protected]>

Quoted 44 lines

18/09/2020 10:41, Bruce Richardson:

Quoted 3 lines · Andrew Rybchenko
Quoted 2 lines · Bruce Richardson
Quoted 1 line

* We still have inconsistencies in our driver macro and naming

templates.

Quoted 1 line
Quoted 1 line
Quoted 1 line

This is just a nice-to-have, but if people are ok with generally

having a

Quoted 1 line
Quoted 1 line
Quoted 1 line

breakage in our macro defines, we could clean this up a lot

further.

Quoted 1 line
Quoted 1 line
Quoted 1 line

Notice how 'net', 'regex' and 'vdpa' have '_PMD' at the end,

while most

Quoted 1 line
Quoted 1 line
Quoted 1 line

others have it before the name. Notice also that many device

classes have

Quoted 1 line
Quoted 1 line
Quoted 1 line

the class at the end of the template, while bbdev has it in the

middle.

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
	$ git grep config_flag_fmt -- drivers/*/meson.build
	drivers/baseband/meson.build:config_flag_fmt =

'RTE_LIBRTE_PMD_BBDEV_@0@'

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

drivers/bus/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_BUS' drivers/common/meson.build:config_flag_fmt =

'RTE_LIBRTE_@0@_COMMON'

Quoted 1 line
Quoted 1 line
Quoted 1 line

drivers/compress/meson.build:config_flag_fmt =

'RTE_LIBRTE_PMD_@0@'

Quoted 1 line
Quoted 1 line
Quoted 1 line

drivers/crypto/meson.build:config_flag_fmt =

'RTE_LIBRTE_PMD_@0@'

Quoted 1 line
Quoted 1 line
Quoted 1 line

drivers/event/meson.build:config_flag_fmt =

'RTE_LIBRTE_PMD_@0@_EVENTDEV'

Quoted 1 line
Quoted 1 line
Quoted 1 line

drivers/mempool/meson.build:config_flag_fmt =

'RTE_LIBRTE_@0@_MEMPOOL'

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

drivers/net/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_PMD' drivers/raw/meson.build:config_flag_fmt =

'RTE_LIBRTE_PMD_@0@_RAWDEV'

Quoted 1 line
Quoted 1 line
Quoted 1 line

drivers/regex/meson.build:config_flag_fmt =

'RTE_LIBRTE_@0@_PMD'

Quoted 1 line
Quoted 1 line
Quoted 1 line

drivers/vdpa/meson.build:config_flag_fmt =

'RTE_LIBRTE_@0@_PMD'

Quoted 7 lines
Quoted 7 lines

As a generic direction I would vote for standard names which are based on directory structure:
- RTE_LIBRTE_ETHDEV
- RTE_DRIVER_NET_SFC
- RTE_DRIVER_COMMON_MLX5
- RTE_DRIVER_BUS_PCI

Quoted 6 lines
Quoted 4 lines

I would prefer RTE_LIB_ETHDEV (instead of LIBRTE). If we plan to rework all flags, I would even prefer
- DPDK_LIB_ETHDEV
- DPDK_DRIVER_BUS_PCI

Since everything else in DPDK uses an RTE prefix,

Not everything. The applications and scripts are prefixed with dpdk-

Quoted 4 lines

I think it might be sensible to keep that here too:

* RTE_LIB_ETHDEV
* RTE_PMD_BUS_PCI

PMD before BUS looks weird.

Quoted 30 lines

* RTE_PMD_NET_IXGBE
* RTE_PMD_CRYPTO_KASUMI
etc.

Quoted 5 lines
Quoted 2 lines

Definite +1, and it would be good if we standardized the .so names like that too.

+1 to align .so names for clarity.

I'd really like this, but need to see the implications for any drivers which may be multi-function, like QAT which has a single .so file.

Quoted 13 lines
Quoted 1 line

The open question is how much backward compatibility needs to be

maintained

Quoted 2 lines

for macros (and also too for .so names)? With this patchset, I've aimed very much to keep strict compatibility for now.

As David said, the compatibility is mostly for apps using driver-specific API.
We could also consider that the compatibility break was announced as part of the makefile removal.
In any case, it is not ABI sensitive, so no need to wait 21.11. If choosing between a compilation flag breakage in 21.02 or 20.11, I would prefer 20.11 where legacy build system is removed.

Quoted 3 lines

About LTS, we may want to have some patches targetted to 18.11 and 19.11, to allow a transparent switch between make and meson.

Any more thoughts on this?
Any change to standardize the library names is going to have to be done in 20.11 if it's to be done at all, since that would be an ABI break. I'd tend towards only changing the defines for 21.02, but if lots of other things are changing too, perhaps it's not worthwhile waiting.

#13 lore raw
In reply to Bruce Richardson
Quoted 26 lines · Bruce Richardson

As flagged previously on-list, there are a number of macros used to specify what libs and drivers are enabled in the build which differ from the equivalents used with make. This patchset is one possible approach to fixing these, but as part of the investigation some issues were hit where I'd like additional input to ensure we are ok with the approach taken in this set.

First, a problem statement:

* While the make build defines generally followed a pattern, there were many instances where the defines were unique. These can be seen in the values defined in patch 4.

* The NIC PMDs had two separate standards for the defines - some (the physical device drivers) tended to have the _PMD at the end of the macros, while the virtual drivers had it in the middle. Since the majority seemed to go with it at the end, meson chose this option. However, as can be seen from patch 4, a number now need special handling for compatibility

* This "_PMD" at the end made its way into other device classes, such as crypto and event, but it appears that the standard for these classes from make is in fact the opposite. Therefore we have had for the last 2+ years conflicting macros for crypto, compression and event classes.

Quoted 4 lines

* There is also the question of how important compatibility for these macros is, especially since we have had numerous incompatibilities without it being reported before. There is also the issue of the deprecation process for macros, since these are not part of any ABI.

The main use I can think of for an application is controlling calls to specific drivers API.
This is how we caught this issue, with testpmd silently dropping code/feature.

My impression is that people are only starting building with meson now they are forced to: even DTS only recently started building with it. This is why I don't think the absence of complaints is a good indicator.

Quoted 20 lines

What's done in this set:

* Firstly, and missing dependencies on apps or examples had to be fixed, where a dependency was missed because it was never needed due to the code being stripped out because of a missing macro.

* Secondly, since it is likely that use of the defines from make is more widespread than those from meson, the defines for the crypto, compression and event classes are changed to align with the make values. Just in case though, temporary code is added to drivers/meson.build to redefine the old meson values too, and a deprecation notice is added for these. The hope is that we can then remove this temporary code in the next release, leaving us with just one macro style for each driver class.

* Thirdly, we add an additional set of backward compatibility macros for the ~30 special-cases, where the meson macro template does not match that defined for make. Again, this is intended to be temporary and a deprecation notice is given for the macros in that file.

Quoted 5 lines

* Finally, we replace all instances of the old macros in the codebase with the newer versions. While the work done in the first four patches (steps 1-3 above) should be ok to backport, this final patch is not suitable for backporting. However, it is relatively simple to produce a new patch for backporting which allow either old or new values to be used in macros.

The series looks good to me.
Thanks for coming with this quickly.

Quoted 8 lines

Open issues/considerations after this patch:

* We still have inconsistencies in our driver macro and naming templates. This is just a nice-to-have, but if people are ok with generally having a breakage in our macro defines, we could clean this up a lot further. Notice how 'net', 'regex' and 'vdpa' have '_PMD' at the end, while most others have it before the name. Notice also that many device classes have the class at the end of the template, while bbdev has it in the middle.

Quoted 12 lines
        $ git grep config_flag_fmt -- drivers/*/meson.build
        drivers/baseband/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_BBDEV_@0@'
        drivers/bus/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_BUS'
        drivers/common/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_COMMON'
        drivers/compress/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_@0@'
        drivers/crypto/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_@0@'
        drivers/event/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_@0@_EVENTDEV'
        drivers/mempool/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_MEMPOOL'
        drivers/net/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_PMD'
        drivers/raw/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_@0@_RAWDEV'
        drivers/regex/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_PMD'
        drivers/vdpa/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_PMD'

I can see the meson implementation kept a part of the chaotic aspect of the make implementation ;-).

I like Andrew proposal.
+1 even if this is "nice to have".

Cleaning the .so names is nice too, and I don't see an impact for applications now that we provide a pkgconfig file.

Quoted 3 lines

* Are we ok to remove the older macros after one release of deprecation, or do we need to wait to next API window.

Waiting for one release or more won't make a difference for people who only upgrade with LTS.
If we go with the change, I'd rather drop the API compatibility in the next release 21.02, as this is an "easy" thing to fix for applications that recompile with intermediate releases.

Signature · 1 line
David Marchand
#14 lore raw
In reply to Bruce Richardson
Quoted 13 lines · Bruce Richardson

As flagged previously on-list, there are a number of macros used to specify what libs and drivers are enabled in the build which differ from the equivalents used with make. This patchset is one possible approach to fixing these, but as part of the investigation some issues were hit where I'd like additional input to ensure we are ok with the approach taken in this set.

First, a problem statement:

* While the make build defines generally followed a pattern, there were many instances where the defines were unique. These can be seen in the values defined in patch 4.

Quoted 6 lines

* The NIC PMDs had two separate standards for the defines - some (the physical device drivers) tended to have the _PMD at the end of the macros, while the virtual drivers had it in the middle. Since the majority seemed to go with it at the end, meson chose this option. However, as can be seen from patch 4, a number now need special handling for compatibility

+1 to all X_PMD macros.

Quoted 25 lines

* This "_PMD" at the end made its way into other device classes, such as crypto and event, but it appears that the standard for these classes from make is in fact the opposite. Therefore we have had for the last 2+ years conflicting macros for crypto, compression and event classes.

* There is also the question of how important compatibility for these macros is, especially since we have had numerous incompatibilities without it being reported before. There is also the issue of the deprecation process for macros, since these are not part of any ABI.

What's done in this set:

* Firstly, and missing dependencies on apps or examples had to be fixed, where a dependency was missed because it was never needed due to the code being stripped out because of a missing macro.

* Secondly, since it is likely that use of the defines from make is more widespread than those from meson, the defines for the crypto, compression and event classes are changed to align with the make values. Just in case though, temporary code is added to drivers/meson.build to redefine the old meson values too, and a deprecation notice is added for these. The hope is that we can then remove this temporary code in the next release, leaving us with just one macro style for each driver class.

Quoted 5 lines

* Thirdly, we add an additional set of backward compatibility macros for the ~30 special-cases, where the meson macro template does not match that defined for make. Again, this is intended to be temporary and a deprecation notice is given for the macros in that file.

Why we need this backward compatibility? The macros are to enable/disable a module, so isn't it DPDK internal. If we enable the macros for new naming convention and update the build system and code for new macros, will it affect the end user?

Quoted 65 lines

* Finally, we replace all instances of the old macros in the codebase with the newer versions. While the work done in the first four patches (steps 1-3 above) should be ok to backport, this final patch is not suitable for backporting. However, it is relatively simple to produce a new patch for backporting which allow either old or new values to be used in macros.

Open issues/considerations after this patch:

* We still have inconsistencies in our driver macro and naming templates. This is just a nice-to-have, but if people are ok with generally having a breakage in our macro defines, we could clean this up a lot further. Notice how 'net', 'regex' and 'vdpa' have '_PMD' at the end, while most others have it before the name. Notice also that many device classes have the class at the end of the template, while bbdev has it in the middle.

	$ git grep config_flag_fmt -- drivers/*/meson.build
	drivers/baseband/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_BBDEV_@0@'
	drivers/bus/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_BUS'
	drivers/common/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_COMMON'
	drivers/compress/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_@0@'
	drivers/crypto/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_@0@'
	drivers/event/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_@0@_EVENTDEV'
	drivers/mempool/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_MEMPOOL'
	drivers/net/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_PMD'
	drivers/raw/meson.build:config_flag_fmt = 'RTE_LIBRTE_PMD_@0@_RAWDEV'
	drivers/regex/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_PMD'
	drivers/vdpa/meson.build:config_flag_fmt = 'RTE_LIBRTE_@0@_PMD'

* Are we ok to remove the older macros after one release of deprecation, or do we need to wait to next API window.

* I have not made any changes to the docs for this, since I expect that these macros are already covered by the doc changes in the make removal set.

Reviews and comments welcome.

Bruce Richardson (5):
app: fix missing dependencies examples/l2fwd-crypto: fix missing dependency
meson: fix compatibility with make build defines
build: add defines for compatibility with make build
build: replace use of old build macros

  app/test-crypto-perf/meson.build     |   3 +
  app/test-pmd/cmdline.c               |   8 +-
  app/test-pmd/meson.build             |  12 +++
  app/test-pmd/parameters.c            |  12 +--
  app/test-pmd/testpmd.c               |  24 ++---
  app/test-pmd/testpmd.h               |   4 +-
  app/test/meson.build                 |   3 +
  app/test/test_eal_flags.c            |   4 +-
  config/meson.build                   |   3 +-
  config/rte_compatibility_defines.h   | 129 +++++++++++++++++++++++++++
  config/rte_config.h                  |   1 +
  doc/guides/rel_notes/deprecation.rst |  17 ++++
  drivers/compress/meson.build         |   2 +-
  drivers/crypto/meson.build           |   2 +-
  drivers/event/meson.build            |   2 +-
  drivers/meson.build                  |  15 ++++
  examples/l2fwd-crypto/meson.build    |   3 +
  17 files changed, 214 insertions(+), 30 deletions(-)

create mode 100644 config/rte_compatibility_defines.h

#15 lore raw
Quoted 54 lines · Ferruh Yigit
Quoted 13 lines · Bruce Richardson

As flagged previously on-list, there are a number of macros used to specify what libs and drivers are enabled in the build which differ from the equivalents used with make. This patchset is one possible approach to fixing these, but as part of the investigation some issues were hit where I'd like additional input to ensure we are ok with the approach taken in this set.

First, a problem statement:

* While the make build defines generally followed a pattern, there were many instances where the defines were unique. These can be seen in the values defined in patch 4.

Quoted 6 lines

* The NIC PMDs had two separate standards for the defines - some (the physical device drivers) tended to have the _PMD at the end of the macros, while the virtual drivers had it in the middle. Since the majority seemed to go with it at the end, meson chose this option. However, as can be seen from patch 4, a number now need special handling for compatibility

+1 to all X_PMD macros.

Quoted 25 lines

* This "_PMD" at the end made its way into other device classes, such as crypto and event, but it appears that the standard for these classes from make is in fact the opposite. Therefore we have had for the last 2+ years conflicting macros for crypto, compression and event classes.

* There is also the question of how important compatibility for these macros is, especially since we have had numerous incompatibilities without it being reported before. There is also the issue of the deprecation process for macros, since these are not part of any ABI.

What's done in this set:

* Firstly, and missing dependencies on apps or examples had to be fixed, where a dependency was missed because it was never needed due to the code being stripped out because of a missing macro.

* Secondly, since it is likely that use of the defines from make is more widespread than those from meson, the defines for the crypto, compression and event classes are changed to align with the make values. Just in case though, temporary code is added to drivers/meson.build to redefine the old meson values too, and a deprecation notice is added for these. The hope is that we can then remove this temporary code in the next release, leaving us with just one macro style for each driver class.

Quoted 5 lines

* Thirdly, we add an additional set of backward compatibility macros for the ~30 special-cases, where the meson macro template does not match that defined for make. Again, this is intended to be temporary and a deprecation notice is given for the macros in that file.

Quoted 5 lines

Why we need this backward compatibility? The macros are to enable/disable a module, so isn't it DPDK internal.
If we enable the macros for new naming convention and update the build system and code for new macros, will it affect the end user?

I'd love to be able to just take this option, but the macros are used to indicate to applications what drivers or other components can be expected to be available - much as the case for testpmd. Ideally, they should not be necessary.

I think the best approach is that proposed earlier on this thread - we keep backward compatibility as much as possible in this release, but add in a new set of standardized macros and a deprecation notice about the old ones. I hope to work on a new rev of this patchset shortly.

/Bruce

#16 lore raw

v2 cover Rework build macros

In reply to Bruce Richardson

Following on from discussion in v1 of this RFC, this second RFC looks to completely rework the automated macros defined by meson to indicate a particular library or driver is enabled in the build. However, while it does so, it also maintains compatibility with previous releases to ease the transition for any apps using the older macros, which already has to contend with a change in DPDK build-system and to switch over to picking up the library names from pkg-config.

[For completeness though, a draft 21.02 patch removing those backward compatibility macros is included in the set, done while the work is fresh in my mind. :-)]

Advantages of this rework:
* Much cleaner having standard macros
* No need for defining the format of macros for each class
* Shorter macros (for the most part)

Disadvantages:
* Potentially requires application changes
* Inconsistency between the auto-defined macros and the other feature-set ones.

Bruce Richardson (8):
app: fix missing dependencies examples/l2fwd-crypto: fix missing dependency
build: add defines for compatibility with make build
qat: build from common folder
build: remove library name from version map filename
build: standardize component names and defines
build: replace use of old build macros [v21.02] build: remove compatibility build defines

 app/proc-info/main.c                          |   4 +-
 app/test-bbdev/meson.build                    |   8 +-
 app/test-bbdev/test_bbdev_perf.c              |   8 +-
 app/test-crypto-perf/cperf_ops.c              |   6 +-
 app/test-crypto-perf/cperf_options.h          |   6 +-
 app/test-crypto-perf/cperf_options_parsing.c  |  16 +-
 .../cperf_test_pmd_cyclecount.c               |   2 +-
 app/test-crypto-perf/cperf_test_throughput.c  |   2 +-
 app/test-crypto-perf/main.c                   |   6 +-
 app/test-crypto-perf/meson.build              |   3 +
 app/test-pipeline/main.c                      |   2 +-
 app/test-pmd/bpf_cmd.h                        |   4 +-
 app/test-pmd/cmdline.c                        | 190 +++++++++---------
 app/test-pmd/config.c                         |  18 +-
 app/test-pmd/meson.build                      |  34 +++-
 app/test-pmd/parameters.c                     |  30 +--
 app/test-pmd/testpmd.c                        |  38 ++--
 app/test-pmd/testpmd.h                        |   4 +-
 app/test/meson.build                          |  33 +--
 app/test/process.h                            |  16 +-
 app/test/test.c                               |  20 +-
 app/test/test_cryptodev.c                     |  26 +--
 app/test/test_cryptodev_hash_test_vectors.h   |   2 +-
 app/test/test_eal_flags.c                     |   4 +-
 app/test/test_func_reentrancy.c               |  24 +--
 app/test/test_kni.c                           |   2 +-
 app/test/test_mp_secondary.c                  |  12 +-
 app/test/test_power.c                         |   2 +-
 app/test/test_power_cpufreq.c                 |   2 +-
 app/test/test_power_kvm_vm.c                  |   2 +-
 app/test/test_table.c                         |   2 +-
 app/test/test_table.h                         |   2 +-
 app/test/test_table_combined.h                |   2 +-
 app/test/test_table_tables.h                  |   2 +-
 config/arm/meson.build                        |   6 +-
 config/meson.build                            |   3 +-
 doc/guides/rel_notes/deprecation.rst          |   8 +
 ..._fpga_5gnr_fec_version.map => version.map} |   0
 ...v_fpga_lte_fec_version.map => version.map} |   0
 drivers/baseband/meson.build                  |   3 -
 ...pmd_bbdev_null_version.map => version.map} |   0
 ...bbdev_turbo_sw_version.map => version.map} |   0
 .../{rte_bus_dpaa_version.map => version.map} |   0
 drivers/bus/fslmc/portal/dpaa2_hw_dpio.c      |   6 +-
 ...{rte_bus_fslmc_version.map => version.map} |   0
 ...{rte_bus_ifpga_version.map => version.map} |   0
 drivers/bus/meson.build                       |   2 -
 .../{rte_bus_pci_version.map => version.map}  |   0
 .../{rte_bus_vdev_version.map => version.map} |   0
 ...{rte_bus_vmbus_version.map => version.map} |   0
 ...rte_common_cpt_version.map => version.map} |   0
 ...e_common_dpaax_version.map => version.map} |   0
 ...te_common_iavf_version.map => version.map} |   0
 drivers/common/meson.build                    |   4 +-
 drivers/common/mlx5/meson.build               |   1 -
 ...te_common_mlx5_version.map => version.map} |   0
 ...te_common_mvep_version.map => version.map} |   0
 ...ommon_octeontx_version.map => version.map} |   0
 ...mmon_octeontx2_version.map => version.map} |   0
 drivers/common/qat/meson.build                |  68 ++++++-
 .../qat/version.map}                          |   0
 ...common_sfc_efx_version.map => version.map} |   0
 .../version.map}                              |   0
 drivers/compress/meson.build                  |   4 +-
 drivers/compress/octeontx/meson.build         |   1 -
 .../version.map}                              |   0
 drivers/compress/qat/meson.build              |  17 --
 drivers/compress/qat/qat_comp.h               |   2 +-
 drivers/compress/qat/qat_comp_pmd.h           |   2 +-
 .../{rte_pmd_zlib_version.map => version.map} |   0
 ..._pmd_aesni_gcm_version.map => version.map} |   0
 .../crypto/aesni_mb/aesni_mb_pmd_private.h    |   2 +-
 ...e_pmd_aesni_mb_version.map => version.map} |   0
 ...{rte_pmd_armv8_version.map => version.map} |   0
 ...te_pmd_caam_jr_version.map => version.map} |   0
 .../{rte_pmd_ccp_version.map => version.map}  |   0
 drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c   |  22 +-
 drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h     |   8 +-
 ..._pmd_dpaa2_sec_version.map => version.map} |   0
 drivers/crypto/dpaa_sec/dpaa_sec.c            |  24 +--
 drivers/crypto/dpaa_sec/dpaa_sec.h            |   8 +-
 ...e_pmd_dpaa_sec_version.map => version.map} |   0
 ...rte_pmd_kasumi_version.map => version.map} |   0
 drivers/crypto/meson.build                    |   3 -
 ...{rte_pmd_mvsam_version.map => version.map} |   0
 ...rte_pmd_nitrox_version.map => version.map} |   0
 drivers/crypto/null/meson.build               |   1 -
 ...md_null_crypto_version.map => version.map} |   0
 drivers/crypto/octeontx/meson.build           |   1 -
 ...cteontx_crypto_version.map => version.map} |   0
 drivers/crypto/octeontx2/meson.build          |   1 -
 ...teontx2_crypto_version.map => version.map} |   0
 ...te_pmd_openssl_version.map => version.map} |   0
 drivers/crypto/qat/meson.build                |  23 ---
 drivers/crypto/qat/qat_sym.c                  |   2 +-
 drivers/crypto/qat/qat_sym.h                  |   8 +-
 drivers/crypto/qat/qat_sym_capabilities.h     |   2 +-
 drivers/crypto/qat/qat_sym_pmd.c              |  12 +-
 drivers/crypto/qat/qat_sym_pmd.h              |   2 +-
 drivers/crypto/qat/qat_sym_session.c          |   4 +-
 drivers/crypto/qat/qat_sym_session.h          |   4 +-
 drivers/crypto/scheduler/meson.build          |   1 -
 ...ypto_scheduler_version.map => version.map} |   0
 ...rte_pmd_snow3g_version.map => version.map} |   0
 drivers/crypto/virtio/meson.build             |   1 -
 ..._virtio_crypto_version.map => version.map} |   0
 .../{rte_pmd_zuc_version.map => version.map}  |   0
 drivers/event/dpaa/meson.build                |   2 +-
 ...pmd_dpaa_event_version.map => version.map} |   0
 drivers/event/dpaa2/meson.build               |   2 +-
 ...md_dpaa2_event_version.map => version.map} |   0
 ..._pmd_dsw_event_version.map => version.map} |   0
 drivers/event/meson.build                     |   2 -
 drivers/event/octeontx/meson.build            |   2 +-
 ...octeontx_event_version.map => version.map} |   0
 drivers/event/octeontx2/meson.build           |   2 +-
 ...cteontx2_event_version.map => version.map} |   0
 ...pmd_opdl_event_version.map => version.map} |   0
 ...skeleton_event_version.map => version.map} |   0
 ...e_pmd_sw_event_version.map => version.map} |   0
 ...mempool_bucket_version.map => version.map} |   0
 ...e_mempool_dpaa_version.map => version.map} |   0
 ..._mempool_dpaa2_version.map => version.map} |   0
 drivers/mempool/meson.build                   |   2 -
 ...mpool_octeontx_version.map => version.map} |   0
 ...pool_octeontx2_version.map => version.map} |   0
 ...e_mempool_ring_version.map => version.map} |   0
 ..._mempool_stack_version.map => version.map} |   0
 drivers/meson.build                           |  18 +-
 ..._pmd_af_packet_version.map => version.map} |   0
 ...rte_pmd_af_xdp_version.map => version.map} |   0
 .../{rte_pmd_ark_version.map => version.map}  |   0
 ...e_pmd_atlantic_version.map => version.map} |   0
 .../{rte_pmd_avp_version.map => version.map}  |   0
 ...{rte_pmd_axgbe_version.map => version.map} |   0
 ...{rte_pmd_bnx2x_version.map => version.map} |   0
 .../{rte_pmd_bnxt_version.map => version.map} |   0
 .../{rte_pmd_bond_version.map => version.map} |   0
 ...{rte_pmd_cxgbe_version.map => version.map} |   0
 .../{rte_pmd_dpaa_version.map => version.map} |   0
 ...{rte_pmd_dpaa2_version.map => version.map} |   0
 ...{rte_pmd_e1000_version.map => version.map} |   0
 .../{rte_pmd_ena_version.map => version.map}  |   0
 ...{rte_pmd_enetc_version.map => version.map} |   0
 .../{rte_pmd_enic_version.map => version.map} |   0
 ...e_pmd_failsafe_version.map => version.map} |   0
 ...{rte_pmd_fm10k_version.map => version.map} |   0
 ...{rte_pmd_hinic_version.map => version.map} |   0
 .../{rte_pmd_hns3_version.map => version.map} |   0
 .../{rte_pmd_i40e_version.map => version.map} |   0
 .../{rte_pmd_iavf_version.map => version.map} |   0
 .../{rte_pmd_ice_version.map => version.map}  |   0
 .../{rte_pmd_igc_version.map => version.map}  |   0
 ...{rte_pmd_ionic_version.map => version.map} |   0
 ...rte_pmd_ipn3ke_version.map => version.map} |   0
 drivers/net/ixgbe/ixgbe_ethdev.c              |   6 +-
 drivers/net/ixgbe/ixgbe_ethdev.h              |   4 +-
 drivers/net/ixgbe/ixgbe_flow.c                |   6 +-
 drivers/net/ixgbe/ixgbe_rxtx.c                |  26 +--
 drivers/net/ixgbe/ixgbe_rxtx.h                |   6 +-
 drivers/net/ixgbe/ixgbe_rxtx_vec_sse.c        |   6 +-
 ...{rte_pmd_ixgbe_version.map => version.map} |   0
 drivers/net/kni/meson.build                   |   2 +-
 .../{rte_pmd_kni_version.map => version.map}  |   0
 ...e_pmd_liquidio_version.map => version.map} |   0
 ...{rte_pmd_memif_version.map => version.map} |   0
 drivers/net/meson.build                       |   2 -
 drivers/net/mlx4/meson.build                  |   2 +-
 .../{rte_pmd_mlx4_version.map => version.map} |   0
 .../{rte_pmd_mlx5_version.map => version.map} |   0
 ...rte_pmd_mvneta_version.map => version.map} |   0
 ...{rte_pmd_mvpp2_version.map => version.map} |   0
 drivers/net/netvsc/meson.build                |   2 +-
 ...rte_pmd_netvsc_version.map => version.map} |   0
 .../{rte_pmd_nfb_version.map => version.map}  |   0
 .../{rte_pmd_nfp_version.map => version.map}  |   0
 .../{rte_pmd_null_version.map => version.map} |   0
 ...e_pmd_octeontx_version.map => version.map} |   0
 ..._pmd_octeontx2_version.map => version.map} |   0
 .../{rte_pmd_pcap_version.map => version.map} |   0
 .../{rte_pmd_pfe_version.map => version.map}  |   0
 .../{rte_pmd_qede_version.map => version.map} |   0
 .../{rte_pmd_ring_version.map => version.map} |   0
 .../{rte_pmd_sfc_version.map => version.map}  |   0
 ...te_pmd_softnic_version.map => version.map} |   0
 ...e_pmd_szedata2_version.map => version.map} |   0
 .../{rte_pmd_tap_version.map => version.map}  |   0
 ...e_pmd_thunderx_version.map => version.map} |   0
 ...md_vdev_netvsc_version.map => version.map} |   0
 drivers/net/vhost/meson.build                 |   2 +-
 ...{rte_pmd_vhost_version.map => version.map} |   0
 ...rte_pmd_virtio_version.map => version.map} |   0
 ...te_pmd_vmxnet3_version.map => version.map} |   0
 drivers/raw/dpaa2_cmdif/meson.build           |   2 +-
 ...ev_dpaa2_cmdif_version.map => version.map} |   0
 drivers/raw/dpaa2_qdma/meson.build            |   2 +-
 ...dev_dpaa2_qdma_version.map => version.map} |   0
 drivers/raw/ifpga/base/opae_osdep.h           |   2 +-
 drivers/raw/ifpga/meson.build                 |   2 +-
 ...e_rawdev_ifpga_version.map => version.map} |   0
 ...te_rawdev_ioat_version.map => version.map} |   0
 drivers/raw/meson.build                       |   2 -
 ...rte_rawdev_ntb_version.map => version.map} |   0
 ..._octeontx2_dma_version.map => version.map} |   0
 ...v_octeontx2_ep_version.map => version.map} |   0
 ...awdev_skeleton_version.map => version.map} |   0
 drivers/regex/meson.build                     |   2 -
 drivers/regex/mlx5/meson.build                |   1 -
 ...pmd_mlx5_regex_version.map => version.map} |   0
 drivers/vdpa/ifc/meson.build                  |   2 +-
 .../{rte_pmd_ifc_version.map => version.map}  |   0
 drivers/vdpa/meson.build                      |   2 -
 drivers/vdpa/mlx5/meson.build                 |   1 -
 ..._pmd_mlx5_vdpa_version.map => version.map} |   0
 examples/bond/meson.build                     |   2 +-
 examples/distributor/meson.build              |   2 +-
 examples/ethtool/lib/rte_ethtool.c            |   4 +-
 examples/ethtool/meson.build                  |   4 +-
 examples/ioat/meson.build                     |   4 +-
 examples/ip_pipeline/kni.c                    |   4 +-
 examples/ip_pipeline/kni.h                    |   4 +-
 examples/ip_pipeline/pipeline.c               |  14 +-
 examples/kni/meson.build                      |   2 +-
 examples/l2fwd-crypto/main.c                  |   4 +-
 examples/l2fwd-crypto/meson.build             |   3 +
 examples/l3fwd-power/meson.build              |   2 +-
 examples/ntb/meson.build                      |   4 +-
 examples/vhost_crypto/meson.build             |   2 +-
 examples/vm_power_manager/channel_monitor.c   |   8 +-
 .../vm_power_manager/guest_cli/meson.build    |   2 +-
 examples/vm_power_manager/main.c              |  12 +-
 examples/vm_power_manager/meson.build         |  14 +-
 .../{rte_acl_version.map => version.map}      |   0
 .../{rte_bbdev_version.map => version.map}    |   0
 ...e_bitratestats_version.map => version.map} |   0
 .../{rte_bpf_version.map => version.map}      |   0
 .../{rte_cfgfile_version.map => version.map}  |   0
 .../{rte_cmdline_version.map => version.map}  |   0
 ...te_compressdev_version.map => version.map} |   0
 ...{rte_cryptodev_version.map => version.map} |   0
 ...te_distributor_version.map => version.map} |   0
 lib/librte_eal/linux/eal.c                    |   4 +-
 .../{rte_eal_version.map => version.map}      |   0
 .../{rte_efd_version.map => version.map}      |   0
 lib/librte_ethdev/meson.build                 |   1 -
 .../{rte_ethdev_version.map => version.map}   |   0
 .../{rte_eventdev_version.map => version.map} |   0
 .../{rte_fib_version.map => version.map}      |   0
 ..._flow_classify_version.map => version.map} |   0
 lib/librte_graph/meson.build                  |   2 -
 .../{rte_graph_version.map => version.map}    |   0
 .../{rte_gro_version.map => version.map}      |   0
 .../{rte_gso_version.map => version.map}      |   0
 .../{rte_hash_version.map => version.map}     |   0
 .../{rte_ip_frag_version.map => version.map}  |   0
 .../{rte_ipsec_version.map => version.map}    |   0
 .../{rte_jobstats_version.map => version.map} |   0
 .../{rte_kni_version.map => version.map}      |   0
 .../{rte_kvargs_version.map => version.map}   |   0
 ...e_latencystats_version.map => version.map} |   0
 .../{rte_lpm_version.map => version.map}      |   0
 .../{rte_mbuf_version.map => version.map}     |   0
 .../{rte_member_version.map => version.map}   |   0
 .../{rte_mempool_version.map => version.map}  |   0
 .../{rte_meter_version.map => version.map}    |   0
 lib/librte_metrics/rte_metrics_telemetry.c    |   4 +-
 lib/librte_metrics/rte_metrics_telemetry.h    |   2 +-
 .../{rte_metrics_version.map => version.map}  |   0
 .../{rte_net_version.map => version.map}      |   0
 .../{rte_node_version.map => version.map}     |   0
 .../{rte_pci_version.map => version.map}      |   0
 .../{rte_pdump_version.map => version.map}    |   0
 .../{rte_pipeline_version.map => version.map} |   0
 lib/librte_port/meson.build                   |   2 +-
 .../{rte_port_version.map => version.map}     |   0
 .../{rte_power_version.map => version.map}    |   0
 .../{rte_rawdev_version.map => version.map}   |   0
 .../{rte_rcu_version.map => version.map}      |   0
 .../{rte_regexdev_version.map => version.map} |   0
 .../{rte_reorder_version.map => version.map}  |   0
 .../{rte_rib_version.map => version.map}      |   0
 .../{rte_ring_version.map => version.map}     |   0
 .../{rte_sched_version.map => version.map}    |   0
 .../{rte_security_version.map => version.map} |   0
 .../{rte_stack_version.map => version.map}    |   0
 .../{rte_table_version.map => version.map}    |   0
 ...{rte_telemetry_version.map => version.map} |   0
 .../{rte_timer_version.map => version.map}    |   0
 .../{rte_vhost_version.map => version.map}    |   0
 lib/meson.build                               |   8 +-
 290 files changed, 506 insertions(+), 510 deletions(-)
 rename drivers/baseband/fpga_5gnr_fec/{rte_pmd_bbdev_fpga_5gnr_fec_version.map => version.map} (100%)
 rename drivers/baseband/fpga_lte_fec/{rte_pmd_bbdev_fpga_lte_fec_version.map => version.map} (100%)
 rename drivers/baseband/null/{rte_pmd_bbdev_null_version.map => version.map} (100%)
 rename drivers/baseband/turbo_sw/{rte_pmd_bbdev_turbo_sw_version.map => version.map} (100%)
 rename drivers/bus/dpaa/{rte_bus_dpaa_version.map => version.map} (100%)
 rename drivers/bus/fslmc/{rte_bus_fslmc_version.map => version.map} (100%)
 rename drivers/bus/ifpga/{rte_bus_ifpga_version.map => version.map} (100%)
 rename drivers/bus/pci/{rte_bus_pci_version.map => version.map} (100%)
 rename drivers/bus/vdev/{rte_bus_vdev_version.map => version.map} (100%)
 rename drivers/bus/vmbus/{rte_bus_vmbus_version.map => version.map} (100%)
 rename drivers/common/cpt/{rte_common_cpt_version.map => version.map} (100%)
 rename drivers/common/dpaax/{rte_common_dpaax_version.map => version.map} (100%)
 rename drivers/common/iavf/{rte_common_iavf_version.map => version.map} (100%)
 rename drivers/common/mlx5/{rte_common_mlx5_version.map => version.map} (100%)
 rename drivers/common/mvep/{rte_common_mvep_version.map => version.map} (100%)
 rename drivers/common/octeontx/{rte_common_octeontx_version.map => version.map} (100%)
 rename drivers/common/octeontx2/{rte_common_octeontx2_version.map => version.map} (100%)
 rename drivers/{compress/isal/rte_pmd_isal_version.map => common/qat/version.map} (100%)
 rename drivers/common/sfc_efx/{rte_common_sfc_efx_version.map => version.map} (100%)
 rename drivers/compress/{octeontx/rte_pmd_octeontx_compress_version.map => isal/version.map} (100%)
 rename drivers/compress/{qat/rte_pmd_qat_version.map => octeontx/version.map} (100%)
 delete mode 100644 drivers/compress/qat/meson.build
 rename drivers/compress/zlib/{rte_pmd_zlib_version.map => version.map} (100%)
 rename drivers/crypto/aesni_gcm/{rte_pmd_aesni_gcm_version.map => version.map} (100%)
 rename drivers/crypto/aesni_mb/{rte_pmd_aesni_mb_version.map => version.map} (100%)
 rename drivers/crypto/armv8/{rte_pmd_armv8_version.map => version.map} (100%)
 rename drivers/crypto/caam_jr/{rte_pmd_caam_jr_version.map => version.map} (100%)
 rename drivers/crypto/ccp/{rte_pmd_ccp_version.map => version.map} (100%)
 rename drivers/crypto/dpaa2_sec/{rte_pmd_dpaa2_sec_version.map => version.map} (100%)
 rename drivers/crypto/dpaa_sec/{rte_pmd_dpaa_sec_version.map => version.map} (100%)
 rename drivers/crypto/kasumi/{rte_pmd_kasumi_version.map => version.map} (100%)
 rename drivers/crypto/mvsam/{rte_pmd_mvsam_version.map => version.map} (100%)
 rename drivers/crypto/nitrox/{rte_pmd_nitrox_version.map => version.map} (100%)
 rename drivers/crypto/null/{rte_pmd_null_crypto_version.map => version.map} (100%)
 rename drivers/crypto/octeontx/{rte_pmd_octeontx_crypto_version.map => version.map} (100%)
 rename drivers/crypto/octeontx2/{rte_pmd_octeontx2_crypto_version.map => version.map} (100%)
 rename drivers/crypto/openssl/{rte_pmd_openssl_version.map => version.map} (100%)
 delete mode 100644 drivers/crypto/qat/meson.build
 rename drivers/crypto/scheduler/{rte_pmd_crypto_scheduler_version.map => version.map} (100%)
 rename drivers/crypto/snow3g/{rte_pmd_snow3g_version.map => version.map} (100%)
 rename drivers/crypto/virtio/{rte_pmd_virtio_crypto_version.map => version.map} (100%)
 rename drivers/crypto/zuc/{rte_pmd_zuc_version.map => version.map} (100%)
 rename drivers/event/dpaa/{rte_pmd_dpaa_event_version.map => version.map} (100%)
 rename drivers/event/dpaa2/{rte_pmd_dpaa2_event_version.map => version.map} (100%)
 rename drivers/event/dsw/{rte_pmd_dsw_event_version.map => version.map} (100%)
 rename drivers/event/octeontx/{rte_pmd_octeontx_event_version.map => version.map} (100%)
 rename drivers/event/octeontx2/{rte_pmd_octeontx2_event_version.map => version.map} (100%)
 rename drivers/event/opdl/{rte_pmd_opdl_event_version.map => version.map} (100%)
 rename drivers/event/skeleton/{rte_pmd_skeleton_event_version.map => version.map} (100%)
 rename drivers/event/sw/{rte_pmd_sw_event_version.map => version.map} (100%)
 rename drivers/mempool/bucket/{rte_mempool_bucket_version.map => version.map} (100%)
 rename drivers/mempool/dpaa/{rte_mempool_dpaa_version.map => version.map} (100%)
 rename drivers/mempool/dpaa2/{rte_mempool_dpaa2_version.map => version.map} (100%)
 rename drivers/mempool/octeontx/{rte_mempool_octeontx_version.map => version.map} (100%)
 rename drivers/mempool/octeontx2/{rte_mempool_octeontx2_version.map => version.map} (100%)
 rename drivers/mempool/ring/{rte_mempool_ring_version.map => version.map} (100%)
 rename drivers/mempool/stack/{rte_mempool_stack_version.map => version.map} (100%)
 rename drivers/net/af_packet/{rte_pmd_af_packet_version.map => version.map} (100%)
 rename drivers/net/af_xdp/{rte_pmd_af_xdp_version.map => version.map} (100%)
 rename drivers/net/ark/{rte_pmd_ark_version.map => version.map} (100%)
 rename drivers/net/atlantic/{rte_pmd_atlantic_version.map => version.map} (100%)
 rename drivers/net/avp/{rte_pmd_avp_version.map => version.map} (100%)
 rename drivers/net/axgbe/{rte_pmd_axgbe_version.map => version.map} (100%)
 rename drivers/net/bnx2x/{rte_pmd_bnx2x_version.map => version.map} (100%)
 rename drivers/net/bnxt/{rte_pmd_bnxt_version.map => version.map} (100%)
 rename drivers/net/bonding/{rte_pmd_bond_version.map => version.map} (100%)
 rename drivers/net/cxgbe/{rte_pmd_cxgbe_version.map => version.map} (100%)
 rename drivers/net/dpaa/{rte_pmd_dpaa_version.map => version.map} (100%)
 rename drivers/net/dpaa2/{rte_pmd_dpaa2_version.map => version.map} (100%)
 rename drivers/net/e1000/{rte_pmd_e1000_version.map => version.map} (100%)
 rename drivers/net/ena/{rte_pmd_ena_version.map => version.map} (100%)
 rename drivers/net/enetc/{rte_pmd_enetc_version.map => version.map} (100%)
 rename drivers/net/enic/{rte_pmd_enic_version.map => version.map} (100%)
 rename drivers/net/failsafe/{rte_pmd_failsafe_version.map => version.map} (100%)
 rename drivers/net/fm10k/{rte_pmd_fm10k_version.map => version.map} (100%)
 rename drivers/net/hinic/{rte_pmd_hinic_version.map => version.map} (100%)
 rename drivers/net/hns3/{rte_pmd_hns3_version.map => version.map} (100%)
 rename drivers/net/i40e/{rte_pmd_i40e_version.map => version.map} (100%)
 rename drivers/net/iavf/{rte_pmd_iavf_version.map => version.map} (100%)
 rename drivers/net/ice/{rte_pmd_ice_version.map => version.map} (100%)
 rename drivers/net/igc/{rte_pmd_igc_version.map => version.map} (100%)
 rename drivers/net/ionic/{rte_pmd_ionic_version.map => version.map} (100%)
 rename drivers/net/ipn3ke/{rte_pmd_ipn3ke_version.map => version.map} (100%)
 rename drivers/net/ixgbe/{rte_pmd_ixgbe_version.map => version.map} (100%)
 rename drivers/net/kni/{rte_pmd_kni_version.map => version.map} (100%)
 rename drivers/net/liquidio/{rte_pmd_liquidio_version.map => version.map} (100%)
 rename drivers/net/memif/{rte_pmd_memif_version.map => version.map} (100%)
 rename drivers/net/mlx4/{rte_pmd_mlx4_version.map => version.map} (100%)
 rename drivers/net/mlx5/{rte_pmd_mlx5_version.map => version.map} (100%)
 rename drivers/net/mvneta/{rte_pmd_mvneta_version.map => version.map} (100%)
 rename drivers/net/mvpp2/{rte_pmd_mvpp2_version.map => version.map} (100%)
 rename drivers/net/netvsc/{rte_pmd_netvsc_version.map => version.map} (100%)
 rename drivers/net/nfb/{rte_pmd_nfb_version.map => version.map} (100%)
 rename drivers/net/nfp/{rte_pmd_nfp_version.map => version.map} (100%)
 rename drivers/net/null/{rte_pmd_null_version.map => version.map} (100%)
 rename drivers/net/octeontx/{rte_pmd_octeontx_version.map => version.map} (100%)
 rename drivers/net/octeontx2/{rte_pmd_octeontx2_version.map => version.map} (100%)
 rename drivers/net/pcap/{rte_pmd_pcap_version.map => version.map} (100%)
 rename drivers/net/pfe/{rte_pmd_pfe_version.map => version.map} (100%)
 rename drivers/net/qede/{rte_pmd_qede_version.map => version.map} (100%)
 rename drivers/net/ring/{rte_pmd_ring_version.map => version.map} (100%)
 rename drivers/net/sfc/{rte_pmd_sfc_version.map => version.map} (100%)
 rename drivers/net/softnic/{rte_pmd_softnic_version.map => version.map} (100%)
 rename drivers/net/szedata2/{rte_pmd_szedata2_version.map => version.map} (100%)
 rename drivers/net/tap/{rte_pmd_tap_version.map => version.map} (100%)
 rename drivers/net/thunderx/{rte_pmd_thunderx_version.map => version.map} (100%)
 rename drivers/net/vdev_netvsc/{rte_pmd_vdev_netvsc_version.map => version.map} (100%)
 rename drivers/net/vhost/{rte_pmd_vhost_version.map => version.map} (100%)
 rename drivers/net/virtio/{rte_pmd_virtio_version.map => version.map} (100%)
 rename drivers/net/vmxnet3/{rte_pmd_vmxnet3_version.map => version.map} (100%)
 rename drivers/raw/dpaa2_cmdif/{rte_rawdev_dpaa2_cmdif_version.map => version.map} (100%)
 rename drivers/raw/dpaa2_qdma/{rte_rawdev_dpaa2_qdma_version.map => version.map} (100%)
 rename drivers/raw/ifpga/{rte_rawdev_ifpga_version.map => version.map} (100%)
 rename drivers/raw/ioat/{rte_rawdev_ioat_version.map => version.map} (100%)
 rename drivers/raw/ntb/{rte_rawdev_ntb_version.map => version.map} (100%)
 rename drivers/raw/octeontx2_dma/{rte_rawdev_octeontx2_dma_version.map => version.map} (100%)
 rename drivers/raw/octeontx2_ep/{rte_rawdev_octeontx2_ep_version.map => version.map} (100%)
 rename drivers/raw/skeleton/{rte_rawdev_skeleton_version.map => version.map} (100%)
 rename drivers/regex/mlx5/{rte_pmd_mlx5_regex_version.map => version.map} (100%)
 rename drivers/vdpa/ifc/{rte_pmd_ifc_version.map => version.map} (100%)
 rename drivers/vdpa/mlx5/{rte_pmd_mlx5_vdpa_version.map => version.map} (100%)
 rename lib/librte_acl/{rte_acl_version.map => version.map} (100%)
 rename lib/librte_bbdev/{rte_bbdev_version.map => version.map} (100%)
 rename lib/librte_bitratestats/{rte_bitratestats_version.map => version.map} (100%)
 rename lib/librte_bpf/{rte_bpf_version.map => version.map} (100%)
 rename lib/librte_cfgfile/{rte_cfgfile_version.map => version.map} (100%)
 rename lib/librte_cmdline/{rte_cmdline_version.map => version.map} (100%)
 rename lib/librte_compressdev/{rte_compressdev_version.map => version.map} (100%)
 rename lib/librte_cryptodev/{rte_cryptodev_version.map => version.map} (100%)
 rename lib/librte_distributor/{rte_distributor_version.map => version.map} (100%)
 rename lib/librte_eal/{rte_eal_version.map => version.map} (100%)
 rename lib/librte_efd/{rte_efd_version.map => version.map} (100%)
 rename lib/librte_ethdev/{rte_ethdev_version.map => version.map} (100%)
 rename lib/librte_eventdev/{rte_eventdev_version.map => version.map} (100%)
 rename lib/librte_fib/{rte_fib_version.map => version.map} (100%)
 rename lib/librte_flow_classify/{rte_flow_classify_version.map => version.map} (100%)
 rename lib/librte_graph/{rte_graph_version.map => version.map} (100%)
 rename lib/librte_gro/{rte_gro_version.map => version.map} (100%)
 rename lib/librte_gso/{rte_gso_version.map => version.map} (100%)
 rename lib/librte_hash/{rte_hash_version.map => version.map} (100%)
 rename lib/librte_ip_frag/{rte_ip_frag_version.map => version.map} (100%)
 rename lib/librte_ipsec/{rte_ipsec_version.map => version.map} (100%)
 rename lib/librte_jobstats/{rte_jobstats_version.map => version.map} (100%)
 rename lib/librte_kni/{rte_kni_version.map => version.map} (100%)
 rename lib/librte_kvargs/{rte_kvargs_version.map => version.map} (100%)
 rename lib/librte_latencystats/{rte_latencystats_version.map => version.map} (100%)
 rename lib/librte_lpm/{rte_lpm_version.map => version.map} (100%)
 rename lib/librte_mbuf/{rte_mbuf_version.map => version.map} (100%)
 rename lib/librte_member/{rte_member_version.map => version.map} (100%)
 rename lib/librte_mempool/{rte_mempool_version.map => version.map} (100%)
 rename lib/librte_meter/{rte_meter_version.map => version.map} (100%)
 rename lib/librte_metrics/{rte_metrics_version.map => version.map} (100%)
 rename lib/librte_net/{rte_net_version.map => version.map} (100%)
 rename lib/librte_node/{rte_node_version.map => version.map} (100%)
 rename lib/librte_pci/{rte_pci_version.map => version.map} (100%)
 rename lib/librte_pdump/{rte_pdump_version.map => version.map} (100%)
 rename lib/librte_pipeline/{rte_pipeline_version.map => version.map} (100%)
 rename lib/librte_port/{rte_port_version.map => version.map} (100%)
 rename lib/librte_power/{rte_power_version.map => version.map} (100%)
 rename lib/librte_rawdev/{rte_rawdev_version.map => version.map} (100%)
 rename lib/librte_rcu/{rte_rcu_version.map => version.map} (100%)
 rename lib/librte_regexdev/{rte_regexdev_version.map => version.map} (100%)
 rename lib/librte_reorder/{rte_reorder_version.map => version.map} (100%)
 rename lib/librte_rib/{rte_rib_version.map => version.map} (100%)
 rename lib/librte_ring/{rte_ring_version.map => version.map} (100%)
 rename lib/librte_sched/{rte_sched_version.map => version.map} (100%)
 rename lib/librte_security/{rte_security_version.map => version.map} (100%)
 rename lib/librte_stack/{rte_stack_version.map => version.map} (100%)
 rename lib/librte_table/{rte_table_version.map => version.map} (100%)
 rename lib/librte_telemetry/{rte_telemetry_version.map => version.map} (100%)
 rename lib/librte_timer/{rte_timer_version.map => version.map} (100%)
 rename lib/librte_vhost/{rte_vhost_version.map => version.map} (100%)
Signature · 1 line
2.25.1
#17 lore raw

RFC PATCH v2 1/8 app: fix missing dependencies

A number of lib and driver dependencies for various apps were missed on build because the proper macro names for their use were mismatched between meson and make build systems. Before adding in equivalent compatibility macros we need to ensure to add the proper dependencies to ensure a valid build.

Fixes 16ade738fd0d ("app/testpmd: build with meson")
Fixes b5dc795a8a55 ("test: build app with meson as dpdk-test")
Fixes 996ef1176111 ("app: add all remaining apps to meson build")
---
 app/test-crypto-perf/meson.build |  3 +++
 app/test-pmd/meson.build         | 12 ++++++++++++
 app/test/meson.build             |  3 +++
 3 files changed, 18 insertions(+)
app/test-crypto-perf/meson.build +3 -0
index f394b75ba5..4bd71510dc 100644
@@ -12,3 +12,6 @@ sources = files('cperf_ops.c',
 		'cperf_test_verify.c',
 		'main.c')
 deps += ['cryptodev', 'net', 'security']
+if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER')
+	deps += 'pmd_crypto_scheduler'
+endif
app/test-pmd/meson.build +12 -0
index f52ab148f6..0d9e450494 100644
@@ -31,6 +31,18 @@ endif
 if dpdk_conf.has('RTE_LIBRTE_PDUMP')
 	deps += 'pdump'
 endif
+if dpdk_conf.has('RTE_LIBRTE_BITRATESTATS')
+	deps += 'bitratestats'
+endif
+if dpdk_conf.has('RTE_LIBRTE_LATENCYSTATS')
+	deps += 'latencystats'
+endif
+if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER')
+	deps += 'pmd_crypto_scheduler'
+endif
+if dpdk_conf.has('RTE_LIBRTE_BOND_PMD')
+	deps += 'pmd_bond'
+endif
 if dpdk_conf.has('RTE_LIBRTE_BNXT_PMD')
 	deps += 'pmd_bnxt'
 endif
app/test/meson.build +3 -0
index 181e870290..781555f9de 100644
@@ -346,6 +346,9 @@ endif
 if dpdk_conf.has('RTE_LIBRTE_SKELETON_EVENTDEV_PMD')
 	test_deps += 'pmd_skeleton_event'
 endif
+if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER')
+	test_deps += 'pmd_crypto_scheduler'
+endif
 if dpdk_conf.has('RTE_LIBRTE_TELEMETRY')
 	test_sources += 'test_telemetry_json.c'
 	fast_tests += [['telemetry_json_autotest', true]]
Signature · 1 line
2.25.1
#18 lore raw

RFC PATCH v2 2/8 examples/l2fwd-crypto: fix missing dependency

In reply to Bruce Richardson

When the crypto-scheduler support is enabled, we were missing the dependency on it as part of the meson build.

Fixes 89f0711f9ddf ("examples: build some samples with meson")
---
 examples/l2fwd-crypto/meson.build | 3 +++
 1 file changed, 3 insertions(+)
examples/l2fwd-crypto/meson.build +3 -0
index 6c852ad199..39e1604fac 100644
@@ -7,6 +7,9 @@
 # DPDK instance, use 'make'
 
 deps += 'cryptodev'
+if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER')
+	deps += 'pmd_crypto_scheduler'
+endif
 allow_experimental_apis = true
 sources = files(
 	'main.c'
Signature · 1 line
2.25.1
#19 lore raw

RFC PATCH v2 3/8 build: add defines for compatibility with make build

In reply to Bruce Richardson

The defines used to indicate what crypto, compression and eventdev drivers were being built were different to those used in the make build, with meson defining them with "_PMD" at the end, while make defined them with "_PMD" in the middle and the specific driver name at the end. This might cause compatibility issues for applications which used the older defines, which switching to build against new DPDK releases.

As well as changing the default to match that of make, meson also special-cases the crypto/compression/event drivers to have both defines provided. This ensures compatibility for these macros with both meson and make from older versions.

For a selection of other libraries and drivers, there were other incompatibilities between the meson and make-defined macros which were not previously highlighted in a deprecation notice, so we add per-macro compatibility defines for these to ease the transition from make to meson.

Fixes 5b9656b157d3 ("lib: build with meson")
Fixes 9314afb68a53 ("drivers: add infrastructure for meson build")
Fixes dcadbbde8e61 ("crypto/null: build with meson")
Fixes 3c32e89f68e1 ("compress/isal: add skeleton ISA-L compression PMD")
Fixes eca504f318db ("drivers/event: build skeleton and SW drivers with meson")
---
 config/meson.build                 |   3 +-
 config/rte_compatibility_defines.h | 129 +++++++++++++++++++++++++++++
 config/rte_config.h                |   1 +
 drivers/compress/meson.build       |   2 +-
 drivers/crypto/meson.build         |   2 +-
 drivers/event/meson.build          |   2 +-
 drivers/meson.build                |  15 ++++
 7 files changed, 150 insertions(+), 4 deletions(-)
 create mode 100644 config/rte_compatibility_defines.h
config/meson.build +2 -1
index 69f2aeb605..3a36d9dd4c 100644
@@ -254,7 +254,8 @@ dpdk_conf.set('RTE_COMPILE_TIME_CPUFLAGS', ','.join(compile_time_cpuflags))
 # set the install path for the drivers
 dpdk_conf.set_quoted('RTE_EAL_PMD_PATH', eal_pmd_path)
 
-install_headers('rte_config.h', subdir: get_option('include_subdir_arch'))
+install_headers(['rte_config.h', 'rte_compatibility_defines.h'],
+		subdir: get_option('include_subdir_arch'))
 
 # enable VFIO only if it is linux OS
 dpdk_conf.set('RTE_EAL_VFIO', is_linux)
config/rte_compatibility_defines.h new file +129 -0

129 lines not on this page · raw message

config/rte_config.h +1 -0
index 0bae630fd9..cacc1837cf 100644
@@ -13,6 +13,7 @@
 #define _RTE_CONFIG_H_
 
 #include <rte_build_config.h>
+#include <rte_compatibility_defines.h>
 
 /* legacy defines */
 #ifdef RTE_EXEC_ENV_LINUX
drivers/compress/meson.build +1 -1
index ee883c3f9f..bea1720a0b 100644
@@ -8,5 +8,5 @@ endif
 drivers = ['isal', 'octeontx', 'qat', 'zlib']
 
 std_deps = ['compressdev'] # compressdev pulls in all other needed deps
-config_flag_fmt = 'RTE_LIBRTE_@0@_PMD'
+config_flag_fmt = 'RTE_LIBRTE_PMD_@0@'
 driver_name_fmt = 'rte_pmd_@0@'
drivers/crypto/meson.build +1 -1
index a2423507ad..25b99c19cb 100644
@@ -26,5 +26,5 @@ drivers = ['aesni_gcm',
 	   'zuc']
 
 std_deps = ['cryptodev'] # cryptodev pulls in all other needed deps
-config_flag_fmt = 'RTE_LIBRTE_@0@_PMD'
+config_flag_fmt = 'RTE_LIBRTE_PMD_@0@'
 driver_name_fmt = 'rte_pmd_@0@'
drivers/event/meson.build +1 -1
index ebe76a75c4..f2a3431472 100644
@@ -11,5 +11,5 @@ if not (toolchain == 'gcc' and cc.version().version_compare('<4.8.6') and
 	drivers += 'octeontx'
 endif
 std_deps = ['eventdev', 'kvargs']
-config_flag_fmt = 'RTE_LIBRTE_@0@_EVENTDEV_PMD'
+config_flag_fmt = 'RTE_LIBRTE_PMD_@0@_EVENTDEV'
 driver_name_fmt = 'rte_pmd_@0@_event'
drivers/meson.build +15 -0
index 5f95265573..b5ac483d31 100644
@@ -117,6 +117,21 @@ foreach subpath:subdirs
 				fmt_name = name
 			endif
 			dpdk_conf.set(config_flag_fmt.format(fmt_name.to_upper()),1)
+			# for driver compatibility, since we changed the
+			# default to match that of make. Remove in future release
+			# after following deprecation process
+			if config_flag_fmt.contains('_PMD_@0@') and (class == 'crypto'
+					or class == 'compress'
+					or class == 'event')
+				alt_flag_fmt = '_@0@_PMD'.join(
+						config_flag_fmt.split('_PMD_@0@'))
+				if config_flag_fmt.contains('EVENTDEV')
+					alt_flag_fmt = '_@0@_EVENTDEV_PMD'.join(
+						config_flag_fmt.split('_PMD_@0@_EVENTDEV'))
+				endif
+				dpdk_conf.set(alt_flag_fmt.format(
+						fmt_name.to_upper()), 1)
+			endif
 			lib_name = driver_name_fmt.format(fmt_name)
 
 			dpdk_extra_ldflags += pkgconfig_extra_libs
Signature · 1 line
2.25.1
#20 lore raw

RFC PATCH v2 4/8 qat: build from common folder

In reply to Bruce Richardson

Since the drivers in the common directory can be processed out of order, in this case following the "bus" directory, we can simplify somewhat the build of the QAT driver to be done entirely from the "common/qat" folder rather than having it's build distributed across 3 folders.

This also opens up the possibility of building the QAT driver with crypto only and the compression part disabled. It further allows more sensible naming of the resulting shared library in case of standardizing library names based on device class; i.e. common_qat is more descriptive for a combined crypto/compression driver than either of the other two prefixes individually.

---
 drivers/common/meson.build                    |  2 +-
 drivers/common/qat/meson.build                | 69 ++++++++++++++++---
 .../qat/rte_common_qat_version.map}           |  0
 drivers/compress/meson.build                  |  2 +-
 drivers/compress/qat/meson.build              | 17 -----
 drivers/crypto/meson.build                    |  1 -
 drivers/crypto/qat/meson.build                | 23 -------
 drivers/meson.build                           |  1 +
 8 files changed, 63 insertions(+), 52 deletions(-)
 rename drivers/{compress/qat/rte_pmd_qat_version.map => common/qat/rte_common_qat_version.map} (100%)
 delete mode 100644 drivers/compress/qat/meson.build
 delete mode 100644 drivers/crypto/qat/meson.build
drivers/common/meson.build +1 -1
index 7ac1ca73a2..abb4f1529a 100644
@@ -6,6 +6,6 @@ if is_windows
 endif
 
 std_deps = ['eal']
-drivers = ['cpt', 'dpaax', 'iavf', 'mvep', 'octeontx', 'octeontx2', 'qat', 'sfc_efx']
+drivers = ['cpt', 'dpaax', 'iavf', 'mvep', 'octeontx', 'octeontx2', 'sfc_efx']
 config_flag_fmt = 'RTE_LIBRTE_@0@_COMMON'
 driver_name_fmt = 'rte_common_@0@'
drivers/common/qat/meson.build +60 -9

75 lines not on this page · raw message

drivers/common/qat/rte_common_qat_version.map renamed from drivers/compress/qat/rte_pmd_qat_version.map +0 -0
similarity index 100%
rename from drivers/compress/qat/rte_pmd_qat_version.map
rename to drivers/common/qat/rte_common_qat_version.map
drivers/compress/meson.build +1 -1
index bea1720a0b..3a4723c0ce 100644
@@ -5,7 +5,7 @@ if is_windows
 	subdir_done()
 endif
 
-drivers = ['isal', 'octeontx', 'qat', 'zlib']
+drivers = ['isal', 'octeontx', 'zlib']
 
 std_deps = ['compressdev'] # compressdev pulls in all other needed deps
 config_flag_fmt = 'RTE_LIBRTE_PMD_@0@'
drivers/compress/qat/meson.build deleted +0 -17
deleted file mode 100644
index a002469809..0000000000
@@ -1,17 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2017-2018 Intel Corporation
-
-
-# Add our sources files to the list
-qat_sources += files('qat_comp_pmd.c',
-		     'qat_comp.c')
-qat_includes += include_directories('.')
-qat_deps += 'compressdev'
-qat_ext_deps += dep
-
-# build the whole driver
-sources += qat_sources
-cflags += qat_cflags
-deps += qat_deps
-ext_deps += qat_ext_deps
-includes += qat_includes
drivers/crypto/meson.build +0 -1
index 25b99c19cb..bd7a940e6d 100644
@@ -19,7 +19,6 @@ drivers = ['aesni_gcm',
 	   'octeontx',
 	   'octeontx2',
 	   'openssl',
-	   'qat',
 	   'scheduler',
 	   'snow3g',
 	   'virtio',
drivers/crypto/qat/meson.build deleted +0 -23
deleted file mode 100644
index a225f374a6..0000000000
@@ -1,23 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2017-2018 Intel Corporation
-
-# this does not build the QAT driver, instead that is done in the compression
-# driver which comes later. Here we just add our sources files to the list
-build = false
-reason = '' # sentinal value to suppress printout
-dep = dependency('libcrypto', required: false)
-qat_includes += include_directories('.')
-qat_deps += 'cryptodev'
-qat_deps += 'net'
-qat_deps += 'security'
-if dep.found()
-	# Add our sources files to the list
-	qat_sources += files('qat_sym_pmd.c',
-			     'qat_sym.c',
-			     'qat_sym_session.c',
-			     'qat_asym_pmd.c',
-			     'qat_asym.c')
-	qat_ext_deps += dep
-	qat_cflags += '-DBUILD_QAT_SYM'
-	qat_cflags += '-DBUILD_QAT_ASYM'
-endif
drivers/meson.build +1 -0
index b5ac483d31..b95b005839 100644
@@ -6,6 +6,7 @@ subdirs = [
 	'common',
 	'bus',
 	'common/mlx5', # depends on bus.
+	'common/qat', # depends on bus.
 	'mempool', # depends on common and bus.
 	'net',     # depends on common, bus, mempool
 	'raw',     # depends on common, bus and net.
Signature · 1 line
2.25.1
#21 lore raw

RFC PATCH v2 5/8 build: remove library name from version map filename

In reply to Bruce Richardson

Since each version map file is contained in the subdirectory of the library it refers to, there is no need to include the library name in the filename. This makes things simpler in case of library renaming.

---
 .../{rte_pmd_bbdev_fpga_5gnr_fec_version.map => version.map}  | 0
 .../{rte_pmd_bbdev_fpga_lte_fec_version.map => version.map}   | 0
 .../null/{rte_pmd_bbdev_null_version.map => version.map}      | 0
 .../{rte_pmd_bbdev_turbo_sw_version.map => version.map}       | 0
 drivers/bus/dpaa/{rte_bus_dpaa_version.map => version.map}    | 0
 drivers/bus/fslmc/{rte_bus_fslmc_version.map => version.map}  | 0
 drivers/bus/ifpga/{rte_bus_ifpga_version.map => version.map}  | 0
 drivers/bus/pci/{rte_bus_pci_version.map => version.map}      | 0
 drivers/bus/vdev/{rte_bus_vdev_version.map => version.map}    | 0
 drivers/bus/vmbus/{rte_bus_vmbus_version.map => version.map}  | 0
 .../common/cpt/{rte_common_cpt_version.map => version.map}    | 0
 .../dpaax/{rte_common_dpaax_version.map => version.map}       | 0
 .../common/iavf/{rte_common_iavf_version.map => version.map}  | 0
 .../common/mlx5/{rte_common_mlx5_version.map => version.map}  | 0
 .../common/mvep/{rte_common_mvep_version.map => version.map}  | 0
 .../octeontx/{rte_common_octeontx_version.map => version.map} | 0
 .../{rte_common_octeontx2_version.map => version.map}         | 0
 .../common/qat/{rte_common_qat_version.map => version.map}    | 0
 .../sfc_efx/{rte_common_sfc_efx_version.map => version.map}   | 0
 .../compress/isal/{rte_pmd_isal_version.map => version.map}   | 0
 .../{rte_pmd_octeontx_compress_version.map => version.map}    | 0
 .../compress/zlib/{rte_pmd_zlib_version.map => version.map}   | 0
 .../aesni_gcm/{rte_pmd_aesni_gcm_version.map => version.map}  | 0
 .../aesni_mb/{rte_pmd_aesni_mb_version.map => version.map}    | 0
 .../crypto/armv8/{rte_pmd_armv8_version.map => version.map}   | 0
 .../caam_jr/{rte_pmd_caam_jr_version.map => version.map}      | 0
 drivers/crypto/ccp/{rte_pmd_ccp_version.map => version.map}   | 0
 .../dpaa2_sec/{rte_pmd_dpaa2_sec_version.map => version.map}  | 0
 .../dpaa_sec/{rte_pmd_dpaa_sec_version.map => version.map}    | 0
 .../crypto/kasumi/{rte_pmd_kasumi_version.map => version.map} | 0
 .../crypto/mvsam/{rte_pmd_mvsam_version.map => version.map}   | 0
 .../crypto/nitrox/{rte_pmd_nitrox_version.map => version.map} | 0
 .../null/{rte_pmd_null_crypto_version.map => version.map}     | 0
 .../{rte_pmd_octeontx_crypto_version.map => version.map}      | 0
 .../{rte_pmd_octeontx2_crypto_version.map => version.map}     | 0
 .../openssl/{rte_pmd_openssl_version.map => version.map}      | 0
 .../{rte_pmd_crypto_scheduler_version.map => version.map}     | 0
 .../crypto/snow3g/{rte_pmd_snow3g_version.map => version.map} | 0
 .../virtio/{rte_pmd_virtio_crypto_version.map => version.map} | 0
 drivers/crypto/zuc/{rte_pmd_zuc_version.map => version.map}   | 0
 .../dpaa/{rte_pmd_dpaa_event_version.map => version.map}      | 0
 .../dpaa2/{rte_pmd_dpaa2_event_version.map => version.map}    | 0
 .../event/dsw/{rte_pmd_dsw_event_version.map => version.map}  | 0
 .../{rte_pmd_octeontx_event_version.map => version.map}       | 0
 .../{rte_pmd_octeontx2_event_version.map => version.map}      | 0
 .../opdl/{rte_pmd_opdl_event_version.map => version.map}      | 0
 .../{rte_pmd_skeleton_event_version.map => version.map}       | 0
 .../event/sw/{rte_pmd_sw_event_version.map => version.map}    | 0
 .../bucket/{rte_mempool_bucket_version.map => version.map}    | 0
 .../dpaa/{rte_mempool_dpaa_version.map => version.map}        | 0
 .../dpaa2/{rte_mempool_dpaa2_version.map => version.map}      | 0
 .../{rte_mempool_octeontx_version.map => version.map}         | 0
 .../{rte_mempool_octeontx2_version.map => version.map}        | 0
 .../ring/{rte_mempool_ring_version.map => version.map}        | 0
 .../stack/{rte_mempool_stack_version.map => version.map}      | 0
 drivers/meson.build                                           | 4 ++--
 .../af_packet/{rte_pmd_af_packet_version.map => version.map}  | 0
 .../net/af_xdp/{rte_pmd_af_xdp_version.map => version.map}    | 0
 drivers/net/ark/{rte_pmd_ark_version.map => version.map}      | 0
 .../atlantic/{rte_pmd_atlantic_version.map => version.map}    | 0
 drivers/net/avp/{rte_pmd_avp_version.map => version.map}      | 0
 drivers/net/axgbe/{rte_pmd_axgbe_version.map => version.map}  | 0
 drivers/net/bnx2x/{rte_pmd_bnx2x_version.map => version.map}  | 0
 drivers/net/bnxt/{rte_pmd_bnxt_version.map => version.map}    | 0
 drivers/net/bonding/{rte_pmd_bond_version.map => version.map} | 0
 drivers/net/cxgbe/{rte_pmd_cxgbe_version.map => version.map}  | 0
 drivers/net/dpaa/{rte_pmd_dpaa_version.map => version.map}    | 0
 drivers/net/dpaa2/{rte_pmd_dpaa2_version.map => version.map}  | 0
 drivers/net/e1000/{rte_pmd_e1000_version.map => version.map}  | 0
 drivers/net/ena/{rte_pmd_ena_version.map => version.map}      | 0
 drivers/net/enetc/{rte_pmd_enetc_version.map => version.map}  | 0
 drivers/net/enic/{rte_pmd_enic_version.map => version.map}    | 0
 .../failsafe/{rte_pmd_failsafe_version.map => version.map}    | 0
 drivers/net/fm10k/{rte_pmd_fm10k_version.map => version.map}  | 0
 drivers/net/hinic/{rte_pmd_hinic_version.map => version.map}  | 0
 drivers/net/hns3/{rte_pmd_hns3_version.map => version.map}    | 0
 drivers/net/i40e/{rte_pmd_i40e_version.map => version.map}    | 0
 drivers/net/iavf/{rte_pmd_iavf_version.map => version.map}    | 0
 drivers/net/ice/{rte_pmd_ice_version.map => version.map}      | 0
 drivers/net/igc/{rte_pmd_igc_version.map => version.map}      | 0
 drivers/net/ionic/{rte_pmd_ionic_version.map => version.map}  | 0
 .../net/ipn3ke/{rte_pmd_ipn3ke_version.map => version.map}    | 0
 drivers/net/ixgbe/{rte_pmd_ixgbe_version.map => version.map}  | 0
 drivers/net/kni/{rte_pmd_kni_version.map => version.map}      | 0
 .../liquidio/{rte_pmd_liquidio_version.map => version.map}    | 0
 drivers/net/memif/{rte_pmd_memif_version.map => version.map}  | 0
 drivers/net/mlx4/{rte_pmd_mlx4_version.map => version.map}    | 0
 drivers/net/mlx5/{rte_pmd_mlx5_version.map => version.map}    | 0
 .../net/mvneta/{rte_pmd_mvneta_version.map => version.map}    | 0
 drivers/net/mvpp2/{rte_pmd_mvpp2_version.map => version.map}  | 0
 .../net/netvsc/{rte_pmd_netvsc_version.map => version.map}    | 0
 drivers/net/nfb/{rte_pmd_nfb_version.map => version.map}      | 0
 drivers/net/nfp/{rte_pmd_nfp_version.map => version.map}      | 0
 drivers/net/null/{rte_pmd_null_version.map => version.map}    | 0
 .../octeontx/{rte_pmd_octeontx_version.map => version.map}    | 0
 .../octeontx2/{rte_pmd_octeontx2_version.map => version.map}  | 0
 drivers/net/pcap/{rte_pmd_pcap_version.map => version.map}    | 0
 drivers/net/pfe/{rte_pmd_pfe_version.map => version.map}      | 0
 drivers/net/qede/{rte_pmd_qede_version.map => version.map}    | 0
 drivers/net/ring/{rte_pmd_ring_version.map => version.map}    | 0
 drivers/net/sfc/{rte_pmd_sfc_version.map => version.map}      | 0
 .../net/softnic/{rte_pmd_softnic_version.map => version.map}  | 0
 .../szedata2/{rte_pmd_szedata2_version.map => version.map}    | 0
 drivers/net/tap/{rte_pmd_tap_version.map => version.map}      | 0
 .../thunderx/{rte_pmd_thunderx_version.map => version.map}    | 0
 .../{rte_pmd_vdev_netvsc_version.map => version.map}          | 0
 drivers/net/vhost/{rte_pmd_vhost_version.map => version.map}  | 0
 .../net/virtio/{rte_pmd_virtio_version.map => version.map}    | 0
 .../net/vmxnet3/{rte_pmd_vmxnet3_version.map => version.map}  | 0
 .../{rte_rawdev_dpaa2_cmdif_version.map => version.map}       | 0
 .../{rte_rawdev_dpaa2_qdma_version.map => version.map}        | 0
 .../raw/ifpga/{rte_rawdev_ifpga_version.map => version.map}   | 0
 drivers/raw/ioat/{rte_rawdev_ioat_version.map => version.map} | 0
 drivers/raw/ntb/{rte_rawdev_ntb_version.map => version.map}   | 0
 .../{rte_rawdev_octeontx2_dma_version.map => version.map}     | 0
 .../{rte_rawdev_octeontx2_ep_version.map => version.map}      | 0
 .../skeleton/{rte_rawdev_skeleton_version.map => version.map} | 0
 .../mlx5/{rte_pmd_mlx5_regex_version.map => version.map}      | 0
 drivers/vdpa/ifc/{rte_pmd_ifc_version.map => version.map}     | 0
 .../vdpa/mlx5/{rte_pmd_mlx5_vdpa_version.map => version.map}  | 0
 lib/librte_acl/{rte_acl_version.map => version.map}           | 0
 lib/librte_bbdev/{rte_bbdev_version.map => version.map}       | 0
 .../{rte_bitratestats_version.map => version.map}             | 0
 lib/librte_bpf/{rte_bpf_version.map => version.map}           | 0
 lib/librte_cfgfile/{rte_cfgfile_version.map => version.map}   | 0
 lib/librte_cmdline/{rte_cmdline_version.map => version.map}   | 0
 .../{rte_compressdev_version.map => version.map}              | 0
 .../{rte_cryptodev_version.map => version.map}                | 0
 .../{rte_distributor_version.map => version.map}              | 0
 lib/librte_eal/{rte_eal_version.map => version.map}           | 0
 lib/librte_efd/{rte_efd_version.map => version.map}           | 0
 lib/librte_ethdev/{rte_ethdev_version.map => version.map}     | 0
 lib/librte_eventdev/{rte_eventdev_version.map => version.map} | 0
 lib/librte_fib/{rte_fib_version.map => version.map}           | 0
 .../{rte_flow_classify_version.map => version.map}            | 0
 lib/librte_graph/{rte_graph_version.map => version.map}       | 0
 lib/librte_gro/{rte_gro_version.map => version.map}           | 0
 lib/librte_gso/{rte_gso_version.map => version.map}           | 0
 lib/librte_hash/{rte_hash_version.map => version.map}         | 0
 lib/librte_ip_frag/{rte_ip_frag_version.map => version.map}   | 0
 lib/librte_ipsec/{rte_ipsec_version.map => version.map}       | 0
 lib/librte_jobstats/{rte_jobstats_version.map => version.map} | 0
 lib/librte_kni/{rte_kni_version.map => version.map}           | 0
 lib/librte_kvargs/{rte_kvargs_version.map => version.map}     | 0
 .../{rte_latencystats_version.map => version.map}             | 0
 lib/librte_lpm/{rte_lpm_version.map => version.map}           | 0
 lib/librte_mbuf/{rte_mbuf_version.map => version.map}         | 0
 lib/librte_member/{rte_member_version.map => version.map}     | 0
 lib/librte_mempool/{rte_mempool_version.map => version.map}   | 0
 lib/librte_meter/{rte_meter_version.map => version.map}       | 0
 lib/librte_metrics/{rte_metrics_version.map => version.map}   | 0
 lib/librte_net/{rte_net_version.map => version.map}           | 0
 lib/librte_node/{rte_node_version.map => version.map}         | 0
 lib/librte_pci/{rte_pci_version.map => version.map}           | 0
 lib/librte_pdump/{rte_pdump_version.map => version.map}       | 0
 lib/librte_pipeline/{rte_pipeline_version.map => version.map} | 0
 lib/librte_port/{rte_port_version.map => version.map}         | 0
 lib/librte_power/{rte_power_version.map => version.map}       | 0
 lib/librte_rawdev/{rte_rawdev_version.map => version.map}     | 0
 lib/librte_rcu/{rte_rcu_version.map => version.map}           | 0
 lib/librte_regexdev/{rte_regexdev_version.map => version.map} | 0
 lib/librte_reorder/{rte_reorder_version.map => version.map}   | 0
 lib/librte_rib/{rte_rib_version.map => version.map}           | 0
 lib/librte_ring/{rte_ring_version.map => version.map}         | 0
 lib/librte_sched/{rte_sched_version.map => version.map}       | 0
 lib/librte_security/{rte_security_version.map => version.map} | 0
 lib/librte_stack/{rte_stack_version.map => version.map}       | 0
 lib/librte_table/{rte_table_version.map => version.map}       | 0
 .../{rte_telemetry_version.map => version.map}                | 0
 lib/librte_timer/{rte_timer_version.map => version.map}       | 0
 lib/librte_vhost/{rte_vhost_version.map => version.map}       | 0
 lib/meson.build                                               | 4 ++--
 172 files changed, 4 insertions(+), 4 deletions(-)
 rename drivers/baseband/fpga_5gnr_fec/{rte_pmd_bbdev_fpga_5gnr_fec_version.map => version.map} (100%)
 rename drivers/baseband/fpga_lte_fec/{rte_pmd_bbdev_fpga_lte_fec_version.map => version.map} (100%)
 rename drivers/baseband/null/{rte_pmd_bbdev_null_version.map => version.map} (100%)
 rename drivers/baseband/turbo_sw/{rte_pmd_bbdev_turbo_sw_version.map => version.map} (100%)
 rename drivers/bus/dpaa/{rte_bus_dpaa_version.map => version.map} (100%)
 rename drivers/bus/fslmc/{rte_bus_fslmc_version.map => version.map} (100%)
 rename drivers/bus/ifpga/{rte_bus_ifpga_version.map => version.map} (100%)
 rename drivers/bus/pci/{rte_bus_pci_version.map => version.map} (100%)
 rename drivers/bus/vdev/{rte_bus_vdev_version.map => version.map} (100%)
 rename drivers/bus/vmbus/{rte_bus_vmbus_version.map => version.map} (100%)
 rename drivers/common/cpt/{rte_common_cpt_version.map => version.map} (100%)
 rename drivers/common/dpaax/{rte_common_dpaax_version.map => version.map} (100%)
 rename drivers/common/iavf/{rte_common_iavf_version.map => version.map} (100%)
 rename drivers/common/mlx5/{rte_common_mlx5_version.map => version.map} (100%)
 rename drivers/common/mvep/{rte_common_mvep_version.map => version.map} (100%)
 rename drivers/common/octeontx/{rte_common_octeontx_version.map => version.map} (100%)
 rename drivers/common/octeontx2/{rte_common_octeontx2_version.map => version.map} (100%)
 rename drivers/common/qat/{rte_common_qat_version.map => version.map} (100%)
 rename drivers/common/sfc_efx/{rte_common_sfc_efx_version.map => version.map} (100%)
 rename drivers/compress/isal/{rte_pmd_isal_version.map => version.map} (100%)
 rename drivers/compress/octeontx/{rte_pmd_octeontx_compress_version.map => version.map} (100%)
 rename drivers/compress/zlib/{rte_pmd_zlib_version.map => version.map} (100%)
 rename drivers/crypto/aesni_gcm/{rte_pmd_aesni_gcm_version.map => version.map} (100%)
 rename drivers/crypto/aesni_mb/{rte_pmd_aesni_mb_version.map => version.map} (100%)
 rename drivers/crypto/armv8/{rte_pmd_armv8_version.map => version.map} (100%)
 rename drivers/crypto/caam_jr/{rte_pmd_caam_jr_version.map => version.map} (100%)
 rename drivers/crypto/ccp/{rte_pmd_ccp_version.map => version.map} (100%)
 rename drivers/crypto/dpaa2_sec/{rte_pmd_dpaa2_sec_version.map => version.map} (100%)
 rename drivers/crypto/dpaa_sec/{rte_pmd_dpaa_sec_version.map => version.map} (100%)
 rename drivers/crypto/kasumi/{rte_pmd_kasumi_version.map => version.map} (100%)
 rename drivers/crypto/mvsam/{rte_pmd_mvsam_version.map => version.map} (100%)
 rename drivers/crypto/nitrox/{rte_pmd_nitrox_version.map => version.map} (100%)
 rename drivers/crypto/null/{rte_pmd_null_crypto_version.map => version.map} (100%)
 rename drivers/crypto/octeontx/{rte_pmd_octeontx_crypto_version.map => version.map} (100%)
 rename drivers/crypto/octeontx2/{rte_pmd_octeontx2_crypto_version.map => version.map} (100%)
 rename drivers/crypto/openssl/{rte_pmd_openssl_version.map => version.map} (100%)
 rename drivers/crypto/scheduler/{rte_pmd_crypto_scheduler_version.map => version.map} (100%)
 rename drivers/crypto/snow3g/{rte_pmd_snow3g_version.map => version.map} (100%)
 rename drivers/crypto/virtio/{rte_pmd_virtio_crypto_version.map => version.map} (100%)
 rename drivers/crypto/zuc/{rte_pmd_zuc_version.map => version.map} (100%)
 rename drivers/event/dpaa/{rte_pmd_dpaa_event_version.map => version.map} (100%)
 rename drivers/event/dpaa2/{rte_pmd_dpaa2_event_version.map => version.map} (100%)
 rename drivers/event/dsw/{rte_pmd_dsw_event_version.map => version.map} (100%)
 rename drivers/event/octeontx/{rte_pmd_octeontx_event_version.map => version.map} (100%)
 rename drivers/event/octeontx2/{rte_pmd_octeontx2_event_version.map => version.map} (100%)
 rename drivers/event/opdl/{rte_pmd_opdl_event_version.map => version.map} (100%)
 rename drivers/event/skeleton/{rte_pmd_skeleton_event_version.map => version.map} (100%)
 rename drivers/event/sw/{rte_pmd_sw_event_version.map => version.map} (100%)
 rename drivers/mempool/bucket/{rte_mempool_bucket_version.map => version.map} (100%)
 rename drivers/mempool/dpaa/{rte_mempool_dpaa_version.map => version.map} (100%)
 rename drivers/mempool/dpaa2/{rte_mempool_dpaa2_version.map => version.map} (100%)
 rename drivers/mempool/octeontx/{rte_mempool_octeontx_version.map => version.map} (100%)
 rename drivers/mempool/octeontx2/{rte_mempool_octeontx2_version.map => version.map} (100%)
 rename drivers/mempool/ring/{rte_mempool_ring_version.map => version.map} (100%)
 rename drivers/mempool/stack/{rte_mempool_stack_version.map => version.map} (100%)
 rename drivers/net/af_packet/{rte_pmd_af_packet_version.map => version.map} (100%)
 rename drivers/net/af_xdp/{rte_pmd_af_xdp_version.map => version.map} (100%)
 rename drivers/net/ark/{rte_pmd_ark_version.map => version.map} (100%)
 rename drivers/net/atlantic/{rte_pmd_atlantic_version.map => version.map} (100%)
 rename drivers/net/avp/{rte_pmd_avp_version.map => version.map} (100%)
 rename drivers/net/axgbe/{rte_pmd_axgbe_version.map => version.map} (100%)
 rename drivers/net/bnx2x/{rte_pmd_bnx2x_version.map => version.map} (100%)
 rename drivers/net/bnxt/{rte_pmd_bnxt_version.map => version.map} (100%)
 rename drivers/net/bonding/{rte_pmd_bond_version.map => version.map} (100%)
 rename drivers/net/cxgbe/{rte_pmd_cxgbe_version.map => version.map} (100%)
 rename drivers/net/dpaa/{rte_pmd_dpaa_version.map => version.map} (100%)
 rename drivers/net/dpaa2/{rte_pmd_dpaa2_version.map => version.map} (100%)
 rename drivers/net/e1000/{rte_pmd_e1000_version.map => version.map} (100%)
 rename drivers/net/ena/{rte_pmd_ena_version.map => version.map} (100%)
 rename drivers/net/enetc/{rte_pmd_enetc_version.map => version.map} (100%)
 rename drivers/net/enic/{rte_pmd_enic_version.map => version.map} (100%)
 rename drivers/net/failsafe/{rte_pmd_failsafe_version.map => version.map} (100%)
 rename drivers/net/fm10k/{rte_pmd_fm10k_version.map => version.map} (100%)
 rename drivers/net/hinic/{rte_pmd_hinic_version.map => version.map} (100%)
 rename drivers/net/hns3/{rte_pmd_hns3_version.map => version.map} (100%)
 rename drivers/net/i40e/{rte_pmd_i40e_version.map => version.map} (100%)
 rename drivers/net/iavf/{rte_pmd_iavf_version.map => version.map} (100%)
 rename drivers/net/ice/{rte_pmd_ice_version.map => version.map} (100%)
 rename drivers/net/igc/{rte_pmd_igc_version.map => version.map} (100%)
 rename drivers/net/ionic/{rte_pmd_ionic_version.map => version.map} (100%)
 rename drivers/net/ipn3ke/{rte_pmd_ipn3ke_version.map => version.map} (100%)
 rename drivers/net/ixgbe/{rte_pmd_ixgbe_version.map => version.map} (100%)
 rename drivers/net/kni/{rte_pmd_kni_version.map => version.map} (100%)
 rename drivers/net/liquidio/{rte_pmd_liquidio_version.map => version.map} (100%)
 rename drivers/net/memif/{rte_pmd_memif_version.map => version.map} (100%)
 rename drivers/net/mlx4/{rte_pmd_mlx4_version.map => version.map} (100%)
 rename drivers/net/mlx5/{rte_pmd_mlx5_version.map => version.map} (100%)
 rename drivers/net/mvneta/{rte_pmd_mvneta_version.map => version.map} (100%)
 rename drivers/net/mvpp2/{rte_pmd_mvpp2_version.map => version.map} (100%)
 rename drivers/net/netvsc/{rte_pmd_netvsc_version.map => version.map} (100%)
 rename drivers/net/nfb/{rte_pmd_nfb_version.map => version.map} (100%)
 rename drivers/net/nfp/{rte_pmd_nfp_version.map => version.map} (100%)
 rename drivers/net/null/{rte_pmd_null_version.map => version.map} (100%)
 rename drivers/net/octeontx/{rte_pmd_octeontx_version.map => version.map} (100%)
 rename drivers/net/octeontx2/{rte_pmd_octeontx2_version.map => version.map} (100%)
 rename drivers/net/pcap/{rte_pmd_pcap_version.map => version.map} (100%)
 rename drivers/net/pfe/{rte_pmd_pfe_version.map => version.map} (100%)
 rename drivers/net/qede/{rte_pmd_qede_version.map => version.map} (100%)
 rename drivers/net/ring/{rte_pmd_ring_version.map => version.map} (100%)
 rename drivers/net/sfc/{rte_pmd_sfc_version.map => version.map} (100%)
 rename drivers/net/softnic/{rte_pmd_softnic_version.map => version.map} (100%)
 rename drivers/net/szedata2/{rte_pmd_szedata2_version.map => version.map} (100%)
 rename drivers/net/tap/{rte_pmd_tap_version.map => version.map} (100%)
 rename drivers/net/thunderx/{rte_pmd_thunderx_version.map => version.map} (100%)
 rename drivers/net/vdev_netvsc/{rte_pmd_vdev_netvsc_version.map => version.map} (100%)
 rename drivers/net/vhost/{rte_pmd_vhost_version.map => version.map} (100%)
 rename drivers/net/virtio/{rte_pmd_virtio_version.map => version.map} (100%)
 rename drivers/net/vmxnet3/{rte_pmd_vmxnet3_version.map => version.map} (100%)
 rename drivers/raw/dpaa2_cmdif/{rte_rawdev_dpaa2_cmdif_version.map => version.map} (100%)
 rename drivers/raw/dpaa2_qdma/{rte_rawdev_dpaa2_qdma_version.map => version.map} (100%)
 rename drivers/raw/ifpga/{rte_rawdev_ifpga_version.map => version.map} (100%)
 rename drivers/raw/ioat/{rte_rawdev_ioat_version.map => version.map} (100%)
 rename drivers/raw/ntb/{rte_rawdev_ntb_version.map => version.map} (100%)
 rename drivers/raw/octeontx2_dma/{rte_rawdev_octeontx2_dma_version.map => version.map} (100%)
 rename drivers/raw/octeontx2_ep/{rte_rawdev_octeontx2_ep_version.map => version.map} (100%)
 rename drivers/raw/skeleton/{rte_rawdev_skeleton_version.map => version.map} (100%)
 rename drivers/regex/mlx5/{rte_pmd_mlx5_regex_version.map => version.map} (100%)
 rename drivers/vdpa/ifc/{rte_pmd_ifc_version.map => version.map} (100%)
 rename drivers/vdpa/mlx5/{rte_pmd_mlx5_vdpa_version.map => version.map} (100%)
 rename lib/librte_acl/{rte_acl_version.map => version.map} (100%)
 rename lib/librte_bbdev/{rte_bbdev_version.map => version.map} (100%)
 rename lib/librte_bitratestats/{rte_bitratestats_version.map => version.map} (100%)
 rename lib/librte_bpf/{rte_bpf_version.map => version.map} (100%)
 rename lib/librte_cfgfile/{rte_cfgfile_version.map => version.map} (100%)
 rename lib/librte_cmdline/{rte_cmdline_version.map => version.map} (100%)
 rename lib/librte_compressdev/{rte_compressdev_version.map => version.map} (100%)
 rename lib/librte_cryptodev/{rte_cryptodev_version.map => version.map} (100%)
 rename lib/librte_distributor/{rte_distributor_version.map => version.map} (100%)
 rename lib/librte_eal/{rte_eal_version.map => version.map} (100%)
 rename lib/librte_efd/{rte_efd_version.map => version.map} (100%)
 rename lib/librte_ethdev/{rte_ethdev_version.map => version.map} (100%)
 rename lib/librte_eventdev/{rte_eventdev_version.map => version.map} (100%)
 rename lib/librte_fib/{rte_fib_version.map => version.map} (100%)
 rename lib/librte_flow_classify/{rte_flow_classify_version.map => version.map} (100%)
 rename lib/librte_graph/{rte_graph_version.map => version.map} (100%)
 rename lib/librte_gro/{rte_gro_version.map => version.map} (100%)
 rename lib/librte_gso/{rte_gso_version.map => version.map} (100%)
 rename lib/librte_hash/{rte_hash_version.map => version.map} (100%)
 rename lib/librte_ip_frag/{rte_ip_frag_version.map => version.map} (100%)
 rename lib/librte_ipsec/{rte_ipsec_version.map => version.map} (100%)
 rename lib/librte_jobstats/{rte_jobstats_version.map => version.map} (100%)
 rename lib/librte_kni/{rte_kni_version.map => version.map} (100%)
 rename lib/librte_kvargs/{rte_kvargs_version.map => version.map} (100%)
 rename lib/librte_latencystats/{rte_latencystats_version.map => version.map} (100%)
 rename lib/librte_lpm/{rte_lpm_version.map => version.map} (100%)
 rename lib/librte_mbuf/{rte_mbuf_version.map => version.map} (100%)
 rename lib/librte_member/{rte_member_version.map => version.map} (100%)
 rename lib/librte_mempool/{rte_mempool_version.map => version.map} (100%)
 rename lib/librte_meter/{rte_meter_version.map => version.map} (100%)
 rename lib/librte_metrics/{rte_metrics_version.map => version.map} (100%)
 rename lib/librte_net/{rte_net_version.map => version.map} (100%)
 rename lib/librte_node/{rte_node_version.map => version.map} (100%)
 rename lib/librte_pci/{rte_pci_version.map => version.map} (100%)
 rename lib/librte_pdump/{rte_pdump_version.map => version.map} (100%)
 rename lib/librte_pipeline/{rte_pipeline_version.map => version.map} (100%)
 rename lib/librte_port/{rte_port_version.map => version.map} (100%)
 rename lib/librte_power/{rte_power_version.map => version.map} (100%)
 rename lib/librte_rawdev/{rte_rawdev_version.map => version.map} (100%)
 rename lib/librte_rcu/{rte_rcu_version.map => version.map} (100%)
 rename lib/librte_regexdev/{rte_regexdev_version.map => version.map} (100%)
 rename lib/librte_reorder/{rte_reorder_version.map => version.map} (100%)
 rename lib/librte_rib/{rte_rib_version.map => version.map} (100%)
 rename lib/librte_ring/{rte_ring_version.map => version.map} (100%)
 rename lib/librte_sched/{rte_sched_version.map => version.map} (100%)
 rename lib/librte_security/{rte_security_version.map => version.map} (100%)
 rename lib/librte_stack/{rte_stack_version.map => version.map} (100%)
 rename lib/librte_table/{rte_table_version.map => version.map} (100%)
 rename lib/librte_telemetry/{rte_telemetry_version.map => version.map} (100%)
 rename lib/librte_timer/{rte_timer_version.map => version.map} (100%)
 rename lib/librte_vhost/{rte_vhost_version.map => version.map} (100%)
drivers/baseband/fpga_5gnr_fec/version.map renamed from drivers/baseband/fpga_5gnr_fec/rte_pmd_bbdev_fpga_5gnr_fec_version.map +0 -0
similarity index 100%
rename from drivers/baseband/fpga_5gnr_fec/rte_pmd_bbdev_fpga_5gnr_fec_version.map
rename to drivers/baseband/fpga_5gnr_fec/version.map
drivers/baseband/fpga_lte_fec/version.map renamed from drivers/baseband/fpga_lte_fec/rte_pmd_bbdev_fpga_lte_fec_version.map +0 -0
similarity index 100%
rename from drivers/baseband/fpga_lte_fec/rte_pmd_bbdev_fpga_lte_fec_version.map
rename to drivers/baseband/fpga_lte_fec/version.map
drivers/baseband/null/version.map renamed from drivers/baseband/null/rte_pmd_bbdev_null_version.map +0 -0
similarity index 100%
rename from drivers/baseband/null/rte_pmd_bbdev_null_version.map
rename to drivers/baseband/null/version.map
drivers/baseband/turbo_sw/version.map renamed from drivers/baseband/turbo_sw/rte_pmd_bbdev_turbo_sw_version.map +0 -0
similarity index 100%
rename from drivers/baseband/turbo_sw/rte_pmd_bbdev_turbo_sw_version.map
rename to drivers/baseband/turbo_sw/version.map
drivers/bus/dpaa/version.map renamed from drivers/bus/dpaa/rte_bus_dpaa_version.map +0 -0
similarity index 100%
rename from drivers/bus/dpaa/rte_bus_dpaa_version.map
rename to drivers/bus/dpaa/version.map
drivers/bus/fslmc/version.map renamed from drivers/bus/fslmc/rte_bus_fslmc_version.map +0 -0
similarity index 100%
rename from drivers/bus/fslmc/rte_bus_fslmc_version.map
rename to drivers/bus/fslmc/version.map
drivers/bus/ifpga/version.map renamed from drivers/bus/ifpga/rte_bus_ifpga_version.map +0 -0
similarity index 100%
rename from drivers/bus/ifpga/rte_bus_ifpga_version.map
rename to drivers/bus/ifpga/version.map
drivers/bus/pci/version.map renamed from drivers/bus/pci/rte_bus_pci_version.map +0 -0
similarity index 100%
rename from drivers/bus/pci/rte_bus_pci_version.map
rename to drivers/bus/pci/version.map
drivers/bus/vdev/version.map renamed from drivers/bus/vdev/rte_bus_vdev_version.map +0 -0
similarity index 100%
rename from drivers/bus/vdev/rte_bus_vdev_version.map
rename to drivers/bus/vdev/version.map
drivers/bus/vmbus/version.map renamed from drivers/bus/vmbus/rte_bus_vmbus_version.map +0 -0
similarity index 100%
rename from drivers/bus/vmbus/rte_bus_vmbus_version.map
rename to drivers/bus/vmbus/version.map
drivers/common/cpt/version.map renamed from drivers/common/cpt/rte_common_cpt_version.map +0 -0
similarity index 100%
rename from drivers/common/cpt/rte_common_cpt_version.map
rename to drivers/common/cpt/version.map
drivers/common/dpaax/version.map renamed from drivers/common/dpaax/rte_common_dpaax_version.map +0 -0
similarity index 100%
rename from drivers/common/dpaax/rte_common_dpaax_version.map
rename to drivers/common/dpaax/version.map
drivers/common/iavf/version.map renamed from drivers/common/iavf/rte_common_iavf_version.map +0 -0
similarity index 100%
rename from drivers/common/iavf/rte_common_iavf_version.map
rename to drivers/common/iavf/version.map
drivers/common/mlx5/version.map renamed from drivers/common/mlx5/rte_common_mlx5_version.map +0 -0
similarity index 100%
rename from drivers/common/mlx5/rte_common_mlx5_version.map
rename to drivers/common/mlx5/version.map
drivers/common/mvep/version.map renamed from drivers/common/mvep/rte_common_mvep_version.map +0 -0
similarity index 100%
rename from drivers/common/mvep/rte_common_mvep_version.map
rename to drivers/common/mvep/version.map
drivers/common/octeontx/version.map renamed from drivers/common/octeontx/rte_common_octeontx_version.map +0 -0
similarity index 100%
rename from drivers/common/octeontx/rte_common_octeontx_version.map
rename to drivers/common/octeontx/version.map
drivers/common/octeontx2/version.map renamed from drivers/common/octeontx2/rte_common_octeontx2_version.map +0 -0
similarity index 100%
rename from drivers/common/octeontx2/rte_common_octeontx2_version.map
rename to drivers/common/octeontx2/version.map
drivers/common/qat/version.map renamed from drivers/common/qat/rte_common_qat_version.map +0 -0
similarity index 100%
rename from drivers/common/qat/rte_common_qat_version.map
rename to drivers/common/qat/version.map
drivers/common/sfc_efx/version.map renamed from drivers/common/sfc_efx/rte_common_sfc_efx_version.map +0 -0
similarity index 100%
rename from drivers/common/sfc_efx/rte_common_sfc_efx_version.map
rename to drivers/common/sfc_efx/version.map
drivers/compress/isal/version.map renamed from drivers/compress/isal/rte_pmd_isal_version.map +0 -0
similarity index 100%
rename from drivers/compress/isal/rte_pmd_isal_version.map
rename to drivers/compress/isal/version.map
drivers/compress/octeontx/version.map renamed from drivers/compress/octeontx/rte_pmd_octeontx_compress_version.map +0 -0
similarity index 100%
rename from drivers/compress/octeontx/rte_pmd_octeontx_compress_version.map
rename to drivers/compress/octeontx/version.map
drivers/compress/zlib/version.map renamed from drivers/compress/zlib/rte_pmd_zlib_version.map +0 -0
similarity index 100%
rename from drivers/compress/zlib/rte_pmd_zlib_version.map
rename to drivers/compress/zlib/version.map
drivers/crypto/aesni_gcm/version.map renamed from drivers/crypto/aesni_gcm/rte_pmd_aesni_gcm_version.map +0 -0
similarity index 100%
rename from drivers/crypto/aesni_gcm/rte_pmd_aesni_gcm_version.map
rename to drivers/crypto/aesni_gcm/version.map
drivers/crypto/aesni_mb/version.map renamed from drivers/crypto/aesni_mb/rte_pmd_aesni_mb_version.map +0 -0
similarity index 100%
rename from drivers/crypto/aesni_mb/rte_pmd_aesni_mb_version.map
rename to drivers/crypto/aesni_mb/version.map
drivers/crypto/armv8/version.map renamed from drivers/crypto/armv8/rte_pmd_armv8_version.map +0 -0
similarity index 100%
rename from drivers/crypto/armv8/rte_pmd_armv8_version.map
rename to drivers/crypto/armv8/version.map
drivers/crypto/caam_jr/version.map renamed from drivers/crypto/caam_jr/rte_pmd_caam_jr_version.map +0 -0
similarity index 100%
rename from drivers/crypto/caam_jr/rte_pmd_caam_jr_version.map
rename to drivers/crypto/caam_jr/version.map
drivers/crypto/ccp/version.map renamed from drivers/crypto/ccp/rte_pmd_ccp_version.map +0 -0
similarity index 100%
rename from drivers/crypto/ccp/rte_pmd_ccp_version.map
rename to drivers/crypto/ccp/version.map
drivers/crypto/dpaa2_sec/version.map renamed from drivers/crypto/dpaa2_sec/rte_pmd_dpaa2_sec_version.map +0 -0
similarity index 100%
rename from drivers/crypto/dpaa2_sec/rte_pmd_dpaa2_sec_version.map
rename to drivers/crypto/dpaa2_sec/version.map
drivers/crypto/dpaa_sec/version.map renamed from drivers/crypto/dpaa_sec/rte_pmd_dpaa_sec_version.map +0 -0
similarity index 100%
rename from drivers/crypto/dpaa_sec/rte_pmd_dpaa_sec_version.map
rename to drivers/crypto/dpaa_sec/version.map
drivers/crypto/kasumi/version.map renamed from drivers/crypto/kasumi/rte_pmd_kasumi_version.map +0 -0
similarity index 100%
rename from drivers/crypto/kasumi/rte_pmd_kasumi_version.map
rename to drivers/crypto/kasumi/version.map
drivers/crypto/mvsam/version.map renamed from drivers/crypto/mvsam/rte_pmd_mvsam_version.map +0 -0
similarity index 100%
rename from drivers/crypto/mvsam/rte_pmd_mvsam_version.map
rename to drivers/crypto/mvsam/version.map
drivers/crypto/nitrox/version.map renamed from drivers/crypto/nitrox/rte_pmd_nitrox_version.map +0 -0
similarity index 100%
rename from drivers/crypto/nitrox/rte_pmd_nitrox_version.map
rename to drivers/crypto/nitrox/version.map
drivers/crypto/null/version.map renamed from drivers/crypto/null/rte_pmd_null_crypto_version.map +0 -0
similarity index 100%
rename from drivers/crypto/null/rte_pmd_null_crypto_version.map
rename to drivers/crypto/null/version.map
drivers/crypto/octeontx/version.map renamed from drivers/crypto/octeontx/rte_pmd_octeontx_crypto_version.map +0 -0
similarity index 100%
rename from drivers/crypto/octeontx/rte_pmd_octeontx_crypto_version.map
rename to drivers/crypto/octeontx/version.map
drivers/crypto/octeontx2/version.map renamed from drivers/crypto/octeontx2/rte_pmd_octeontx2_crypto_version.map +0 -0
similarity index 100%
rename from drivers/crypto/octeontx2/rte_pmd_octeontx2_crypto_version.map
rename to drivers/crypto/octeontx2/version.map
drivers/crypto/openssl/version.map renamed from drivers/crypto/openssl/rte_pmd_openssl_version.map +0 -0
similarity index 100%
rename from drivers/crypto/openssl/rte_pmd_openssl_version.map
rename to drivers/crypto/openssl/version.map
drivers/crypto/scheduler/version.map renamed from drivers/crypto/scheduler/rte_pmd_crypto_scheduler_version.map +0 -0
similarity index 100%
rename from drivers/crypto/scheduler/rte_pmd_crypto_scheduler_version.map
rename to drivers/crypto/scheduler/version.map
drivers/crypto/snow3g/version.map renamed from drivers/crypto/snow3g/rte_pmd_snow3g_version.map +0 -0
similarity index 100%
rename from drivers/crypto/snow3g/rte_pmd_snow3g_version.map
rename to drivers/crypto/snow3g/version.map
drivers/crypto/virtio/version.map renamed from drivers/crypto/virtio/rte_pmd_virtio_crypto_version.map +0 -0
similarity index 100%
rename from drivers/crypto/virtio/rte_pmd_virtio_crypto_version.map
rename to drivers/crypto/virtio/version.map
drivers/crypto/zuc/version.map renamed from drivers/crypto/zuc/rte_pmd_zuc_version.map +0 -0
similarity index 100%
rename from drivers/crypto/zuc/rte_pmd_zuc_version.map
rename to drivers/crypto/zuc/version.map
drivers/event/dpaa/version.map renamed from drivers/event/dpaa/rte_pmd_dpaa_event_version.map +0 -0
similarity index 100%
rename from drivers/event/dpaa/rte_pmd_dpaa_event_version.map
rename to drivers/event/dpaa/version.map
drivers/event/dpaa2/version.map renamed from drivers/event/dpaa2/rte_pmd_dpaa2_event_version.map +0 -0
similarity index 100%
rename from drivers/event/dpaa2/rte_pmd_dpaa2_event_version.map
rename to drivers/event/dpaa2/version.map
drivers/event/dsw/version.map renamed from drivers/event/dsw/rte_pmd_dsw_event_version.map +0 -0
similarity index 100%
rename from drivers/event/dsw/rte_pmd_dsw_event_version.map
rename to drivers/event/dsw/version.map
drivers/event/octeontx/version.map renamed from drivers/event/octeontx/rte_pmd_octeontx_event_version.map +0 -0
similarity index 100%
rename from drivers/event/octeontx/rte_pmd_octeontx_event_version.map
rename to drivers/event/octeontx/version.map
drivers/event/octeontx2/version.map renamed from drivers/event/octeontx2/rte_pmd_octeontx2_event_version.map +0 -0
similarity index 100%
rename from drivers/event/octeontx2/rte_pmd_octeontx2_event_version.map
rename to drivers/event/octeontx2/version.map
drivers/event/opdl/version.map renamed from drivers/event/opdl/rte_pmd_opdl_event_version.map +0 -0
similarity index 100%
rename from drivers/event/opdl/rte_pmd_opdl_event_version.map
rename to drivers/event/opdl/version.map
drivers/event/skeleton/version.map renamed from drivers/event/skeleton/rte_pmd_skeleton_event_version.map +0 -0
similarity index 100%
rename from drivers/event/skeleton/rte_pmd_skeleton_event_version.map
rename to drivers/event/skeleton/version.map
drivers/event/sw/version.map renamed from drivers/event/sw/rte_pmd_sw_event_version.map +0 -0
similarity index 100%
rename from drivers/event/sw/rte_pmd_sw_event_version.map
rename to drivers/event/sw/version.map
drivers/mempool/bucket/version.map renamed from drivers/mempool/bucket/rte_mempool_bucket_version.map +0 -0
similarity index 100%
rename from drivers/mempool/bucket/rte_mempool_bucket_version.map
rename to drivers/mempool/bucket/version.map
drivers/mempool/dpaa/version.map renamed from drivers/mempool/dpaa/rte_mempool_dpaa_version.map +0 -0
similarity index 100%
rename from drivers/mempool/dpaa/rte_mempool_dpaa_version.map
rename to drivers/mempool/dpaa/version.map
drivers/mempool/dpaa2/version.map renamed from drivers/mempool/dpaa2/rte_mempool_dpaa2_version.map +0 -0
similarity index 100%
rename from drivers/mempool/dpaa2/rte_mempool_dpaa2_version.map
rename to drivers/mempool/dpaa2/version.map
drivers/mempool/octeontx/version.map renamed from drivers/mempool/octeontx/rte_mempool_octeontx_version.map +0 -0
similarity index 100%
rename from drivers/mempool/octeontx/rte_mempool_octeontx_version.map
rename to drivers/mempool/octeontx/version.map
drivers/mempool/octeontx2/version.map renamed from drivers/mempool/octeontx2/rte_mempool_octeontx2_version.map +0 -0
similarity index 100%
rename from drivers/mempool/octeontx2/rte_mempool_octeontx2_version.map
rename to drivers/mempool/octeontx2/version.map
drivers/mempool/ring/version.map renamed from drivers/mempool/ring/rte_mempool_ring_version.map +0 -0
similarity index 100%
rename from drivers/mempool/ring/rte_mempool_ring_version.map
rename to drivers/mempool/ring/version.map
drivers/mempool/stack/version.map renamed from drivers/mempool/stack/rte_mempool_stack_version.map +0 -0
similarity index 100%
rename from drivers/mempool/stack/rte_mempool_stack_version.map
rename to drivers/mempool/stack/version.map
drivers/meson.build +2 -2
index b95b005839..3d4bbff13b 100644
@@ -166,9 +166,9 @@ foreach subpath:subdirs
 				install: true)
 
 			# now build the shared driver
-			version_map = '@0@/@1@/@2@_version.map'.format(
+			version_map = '@0@/@1@/version.map'.format(
 					meson.current_source_dir(),
-					drv_path, lib_name)
+					drv_path)
 			implib = 'lib' + lib_name + '.dll.a'
 
 			def_file = custom_target(lib_name + '_def',
drivers/net/af_packet/version.map renamed from drivers/net/af_packet/rte_pmd_af_packet_version.map +0 -0
similarity index 100%
rename from drivers/net/af_packet/rte_pmd_af_packet_version.map
rename to drivers/net/af_packet/version.map
drivers/net/af_xdp/version.map renamed from drivers/net/af_xdp/rte_pmd_af_xdp_version.map +0 -0
similarity index 100%
rename from drivers/net/af_xdp/rte_pmd_af_xdp_version.map
rename to drivers/net/af_xdp/version.map
drivers/net/ark/version.map renamed from drivers/net/ark/rte_pmd_ark_version.map +0 -0
similarity index 100%
rename from drivers/net/ark/rte_pmd_ark_version.map
rename to drivers/net/ark/version.map
drivers/net/atlantic/version.map renamed from drivers/net/atlantic/rte_pmd_atlantic_version.map +0 -0
similarity index 100%
rename from drivers/net/atlantic/rte_pmd_atlantic_version.map
rename to drivers/net/atlantic/version.map
drivers/net/avp/version.map renamed from drivers/net/avp/rte_pmd_avp_version.map +0 -0
similarity index 100%
rename from drivers/net/avp/rte_pmd_avp_version.map
rename to drivers/net/avp/version.map
drivers/net/axgbe/version.map renamed from drivers/net/axgbe/rte_pmd_axgbe_version.map +0 -0
similarity index 100%
rename from drivers/net/axgbe/rte_pmd_axgbe_version.map
rename to drivers/net/axgbe/version.map
drivers/net/bnx2x/version.map renamed from drivers/net/bnx2x/rte_pmd_bnx2x_version.map +0 -0
similarity index 100%
rename from drivers/net/bnx2x/rte_pmd_bnx2x_version.map
rename to drivers/net/bnx2x/version.map
drivers/net/bnxt/version.map renamed from drivers/net/bnxt/rte_pmd_bnxt_version.map +0 -0
similarity index 100%
rename from drivers/net/bnxt/rte_pmd_bnxt_version.map
rename to drivers/net/bnxt/version.map
drivers/net/bonding/version.map renamed from drivers/net/bonding/rte_pmd_bond_version.map +0 -0
similarity index 100%
rename from drivers/net/bonding/rte_pmd_bond_version.map
rename to drivers/net/bonding/version.map
drivers/net/cxgbe/version.map renamed from drivers/net/cxgbe/rte_pmd_cxgbe_version.map +0 -0
similarity index 100%
rename from drivers/net/cxgbe/rte_pmd_cxgbe_version.map
rename to drivers/net/cxgbe/version.map
drivers/net/dpaa/version.map renamed from drivers/net/dpaa/rte_pmd_dpaa_version.map +0 -0
similarity index 100%
rename from drivers/net/dpaa/rte_pmd_dpaa_version.map
rename to drivers/net/dpaa/version.map
drivers/net/dpaa2/version.map renamed from drivers/net/dpaa2/rte_pmd_dpaa2_version.map +0 -0
similarity index 100%
rename from drivers/net/dpaa2/rte_pmd_dpaa2_version.map
rename to drivers/net/dpaa2/version.map
drivers/net/e1000/version.map renamed from drivers/net/e1000/rte_pmd_e1000_version.map +0 -0
similarity index 100%
rename from drivers/net/e1000/rte_pmd_e1000_version.map
rename to drivers/net/e1000/version.map
drivers/net/ena/version.map renamed from drivers/net/ena/rte_pmd_ena_version.map +0 -0
similarity index 100%
rename from drivers/net/ena/rte_pmd_ena_version.map
rename to drivers/net/ena/version.map
drivers/net/enetc/version.map renamed from drivers/net/enetc/rte_pmd_enetc_version.map +0 -0
similarity index 100%
rename from drivers/net/enetc/rte_pmd_enetc_version.map
rename to drivers/net/enetc/version.map
drivers/net/enic/version.map renamed from drivers/net/enic/rte_pmd_enic_version.map +0 -0
similarity index 100%
rename from drivers/net/enic/rte_pmd_enic_version.map
rename to drivers/net/enic/version.map
drivers/net/failsafe/version.map renamed from drivers/net/failsafe/rte_pmd_failsafe_version.map +0 -0
similarity index 100%
rename from drivers/net/failsafe/rte_pmd_failsafe_version.map
rename to drivers/net/failsafe/version.map
drivers/net/fm10k/version.map renamed from drivers/net/fm10k/rte_pmd_fm10k_version.map +0 -0
similarity index 100%
rename from drivers/net/fm10k/rte_pmd_fm10k_version.map
rename to drivers/net/fm10k/version.map
drivers/net/hinic/version.map renamed from drivers/net/hinic/rte_pmd_hinic_version.map +0 -0
similarity index 100%
rename from drivers/net/hinic/rte_pmd_hinic_version.map
rename to drivers/net/hinic/version.map
drivers/net/hns3/version.map renamed from drivers/net/hns3/rte_pmd_hns3_version.map +0 -0
similarity index 100%
rename from drivers/net/hns3/rte_pmd_hns3_version.map
rename to drivers/net/hns3/version.map
drivers/net/i40e/version.map renamed from drivers/net/i40e/rte_pmd_i40e_version.map +0 -0
similarity index 100%
rename from drivers/net/i40e/rte_pmd_i40e_version.map
rename to drivers/net/i40e/version.map
drivers/net/iavf/version.map renamed from drivers/net/iavf/rte_pmd_iavf_version.map +0 -0
similarity index 100%
rename from drivers/net/iavf/rte_pmd_iavf_version.map
rename to drivers/net/iavf/version.map
drivers/net/ice/version.map renamed from drivers/net/ice/rte_pmd_ice_version.map +0 -0
similarity index 100%
rename from drivers/net/ice/rte_pmd_ice_version.map
rename to drivers/net/ice/version.map
drivers/net/igc/version.map renamed from drivers/net/igc/rte_pmd_igc_version.map +0 -0
similarity index 100%
rename from drivers/net/igc/rte_pmd_igc_version.map
rename to drivers/net/igc/version.map
drivers/net/ionic/version.map renamed from drivers/net/ionic/rte_pmd_ionic_version.map +0 -0
similarity index 100%
rename from drivers/net/ionic/rte_pmd_ionic_version.map
rename to drivers/net/ionic/version.map
drivers/net/ipn3ke/version.map renamed from drivers/net/ipn3ke/rte_pmd_ipn3ke_version.map +0 -0
similarity index 100%
rename from drivers/net/ipn3ke/rte_pmd_ipn3ke_version.map
rename to drivers/net/ipn3ke/version.map
drivers/net/ixgbe/version.map renamed from drivers/net/ixgbe/rte_pmd_ixgbe_version.map +0 -0
similarity index 100%
rename from drivers/net/ixgbe/rte_pmd_ixgbe_version.map
rename to drivers/net/ixgbe/version.map
drivers/net/kni/version.map renamed from drivers/net/kni/rte_pmd_kni_version.map +0 -0
similarity index 100%
rename from drivers/net/kni/rte_pmd_kni_version.map
rename to drivers/net/kni/version.map
drivers/net/liquidio/version.map renamed from drivers/net/liquidio/rte_pmd_liquidio_version.map +0 -0
similarity index 100%
rename from drivers/net/liquidio/rte_pmd_liquidio_version.map
rename to drivers/net/liquidio/version.map
drivers/net/memif/version.map renamed from drivers/net/memif/rte_pmd_memif_version.map +0 -0
similarity index 100%
rename from drivers/net/memif/rte_pmd_memif_version.map
rename to drivers/net/memif/version.map
drivers/net/mlx4/version.map renamed from drivers/net/mlx4/rte_pmd_mlx4_version.map +0 -0
similarity index 100%
rename from drivers/net/mlx4/rte_pmd_mlx4_version.map
rename to drivers/net/mlx4/version.map
drivers/net/mlx5/version.map renamed from drivers/net/mlx5/rte_pmd_mlx5_version.map +0 -0
similarity index 100%
rename from drivers/net/mlx5/rte_pmd_mlx5_version.map
rename to drivers/net/mlx5/version.map
drivers/net/mvneta/version.map renamed from drivers/net/mvneta/rte_pmd_mvneta_version.map +0 -0
similarity index 100%
rename from drivers/net/mvneta/rte_pmd_mvneta_version.map
rename to drivers/net/mvneta/version.map
drivers/net/mvpp2/version.map renamed from drivers/net/mvpp2/rte_pmd_mvpp2_version.map +0 -0
similarity index 100%
rename from drivers/net/mvpp2/rte_pmd_mvpp2_version.map
rename to drivers/net/mvpp2/version.map
drivers/net/netvsc/version.map renamed from drivers/net/netvsc/rte_pmd_netvsc_version.map +0 -0
similarity index 100%
rename from drivers/net/netvsc/rte_pmd_netvsc_version.map
rename to drivers/net/netvsc/version.map
drivers/net/nfb/version.map renamed from drivers/net/nfb/rte_pmd_nfb_version.map +0 -0
similarity index 100%
rename from drivers/net/nfb/rte_pmd_nfb_version.map
rename to drivers/net/nfb/version.map
drivers/net/nfp/version.map renamed from drivers/net/nfp/rte_pmd_nfp_version.map +0 -0
similarity index 100%
rename from drivers/net/nfp/rte_pmd_nfp_version.map
rename to drivers/net/nfp/version.map
drivers/net/null/version.map renamed from drivers/net/null/rte_pmd_null_version.map +0 -0
similarity index 100%
rename from drivers/net/null/rte_pmd_null_version.map
rename to drivers/net/null/version.map
drivers/net/octeontx/version.map renamed from drivers/net/octeontx/rte_pmd_octeontx_version.map +0 -0
similarity index 100%
rename from drivers/net/octeontx/rte_pmd_octeontx_version.map
rename to drivers/net/octeontx/version.map
drivers/net/octeontx2/version.map renamed from drivers/net/octeontx2/rte_pmd_octeontx2_version.map +0 -0
similarity index 100%
rename from drivers/net/octeontx2/rte_pmd_octeontx2_version.map
rename to drivers/net/octeontx2/version.map
drivers/net/pcap/version.map renamed from drivers/net/pcap/rte_pmd_pcap_version.map +0 -0
similarity index 100%
rename from drivers/net/pcap/rte_pmd_pcap_version.map
rename to drivers/net/pcap/version.map
drivers/net/pfe/version.map renamed from drivers/net/pfe/rte_pmd_pfe_version.map +0 -0
similarity index 100%
rename from drivers/net/pfe/rte_pmd_pfe_version.map
rename to drivers/net/pfe/version.map
drivers/net/qede/version.map renamed from drivers/net/qede/rte_pmd_qede_version.map +0 -0
similarity index 100%
rename from drivers/net/qede/rte_pmd_qede_version.map
rename to drivers/net/qede/version.map
drivers/net/ring/version.map renamed from drivers/net/ring/rte_pmd_ring_version.map +0 -0
similarity index 100%
rename from drivers/net/ring/rte_pmd_ring_version.map
rename to drivers/net/ring/version.map
drivers/net/sfc/version.map renamed from drivers/net/sfc/rte_pmd_sfc_version.map +0 -0
similarity index 100%
rename from drivers/net/sfc/rte_pmd_sfc_version.map
rename to drivers/net/sfc/version.map
drivers/net/softnic/version.map renamed from drivers/net/softnic/rte_pmd_softnic_version.map +0 -0
similarity index 100%
rename from drivers/net/softnic/rte_pmd_softnic_version.map
rename to drivers/net/softnic/version.map
drivers/net/szedata2/version.map renamed from drivers/net/szedata2/rte_pmd_szedata2_version.map +0 -0
similarity index 100%
rename from drivers/net/szedata2/rte_pmd_szedata2_version.map
rename to drivers/net/szedata2/version.map
drivers/net/tap/version.map renamed from drivers/net/tap/rte_pmd_tap_version.map +0 -0
similarity index 100%
rename from drivers/net/tap/rte_pmd_tap_version.map
rename to drivers/net/tap/version.map
drivers/net/thunderx/version.map renamed from drivers/net/thunderx/rte_pmd_thunderx_version.map +0 -0
similarity index 100%
rename from drivers/net/thunderx/rte_pmd_thunderx_version.map
rename to drivers/net/thunderx/version.map
drivers/net/vdev_netvsc/version.map renamed from drivers/net/vdev_netvsc/rte_pmd_vdev_netvsc_version.map +0 -0
similarity index 100%
rename from drivers/net/vdev_netvsc/rte_pmd_vdev_netvsc_version.map
rename to drivers/net/vdev_netvsc/version.map
drivers/net/vhost/version.map renamed from drivers/net/vhost/rte_pmd_vhost_version.map +0 -0
similarity index 100%
rename from drivers/net/vhost/rte_pmd_vhost_version.map
rename to drivers/net/vhost/version.map
drivers/net/virtio/version.map renamed from drivers/net/virtio/rte_pmd_virtio_version.map +0 -0
similarity index 100%
rename from drivers/net/virtio/rte_pmd_virtio_version.map
rename to drivers/net/virtio/version.map
drivers/net/vmxnet3/version.map renamed from drivers/net/vmxnet3/rte_pmd_vmxnet3_version.map +0 -0
similarity index 100%
rename from drivers/net/vmxnet3/rte_pmd_vmxnet3_version.map
rename to drivers/net/vmxnet3/version.map
drivers/raw/dpaa2_cmdif/version.map renamed from drivers/raw/dpaa2_cmdif/rte_rawdev_dpaa2_cmdif_version.map +0 -0
similarity index 100%
rename from drivers/raw/dpaa2_cmdif/rte_rawdev_dpaa2_cmdif_version.map
rename to drivers/raw/dpaa2_cmdif/version.map
drivers/raw/dpaa2_qdma/version.map renamed from drivers/raw/dpaa2_qdma/rte_rawdev_dpaa2_qdma_version.map +0 -0
similarity index 100%
rename from drivers/raw/dpaa2_qdma/rte_rawdev_dpaa2_qdma_version.map
rename to drivers/raw/dpaa2_qdma/version.map
drivers/raw/ifpga/version.map renamed from drivers/raw/ifpga/rte_rawdev_ifpga_version.map +0 -0
similarity index 100%
rename from drivers/raw/ifpga/rte_rawdev_ifpga_version.map
rename to drivers/raw/ifpga/version.map
drivers/raw/ioat/version.map renamed from drivers/raw/ioat/rte_rawdev_ioat_version.map +0 -0
similarity index 100%
rename from drivers/raw/ioat/rte_rawdev_ioat_version.map
rename to drivers/raw/ioat/version.map
drivers/raw/ntb/version.map renamed from drivers/raw/ntb/rte_rawdev_ntb_version.map +0 -0
similarity index 100%
rename from drivers/raw/ntb/rte_rawdev_ntb_version.map
rename to drivers/raw/ntb/version.map
drivers/raw/octeontx2_dma/version.map renamed from drivers/raw/octeontx2_dma/rte_rawdev_octeontx2_dma_version.map +0 -0
similarity index 100%
rename from drivers/raw/octeontx2_dma/rte_rawdev_octeontx2_dma_version.map
rename to drivers/raw/octeontx2_dma/version.map
drivers/raw/octeontx2_ep/version.map renamed from drivers/raw/octeontx2_ep/rte_rawdev_octeontx2_ep_version.map +0 -0
similarity index 100%
rename from drivers/raw/octeontx2_ep/rte_rawdev_octeontx2_ep_version.map
rename to drivers/raw/octeontx2_ep/version.map
drivers/raw/skeleton/version.map renamed from drivers/raw/skeleton/rte_rawdev_skeleton_version.map +0 -0
similarity index 100%
rename from drivers/raw/skeleton/rte_rawdev_skeleton_version.map
rename to drivers/raw/skeleton/version.map
drivers/regex/mlx5/version.map renamed from drivers/regex/mlx5/rte_pmd_mlx5_regex_version.map +0 -0
similarity index 100%
rename from drivers/regex/mlx5/rte_pmd_mlx5_regex_version.map
rename to drivers/regex/mlx5/version.map
drivers/vdpa/ifc/version.map renamed from drivers/vdpa/ifc/rte_pmd_ifc_version.map +0 -0
similarity index 100%
rename from drivers/vdpa/ifc/rte_pmd_ifc_version.map
rename to drivers/vdpa/ifc/version.map
drivers/vdpa/mlx5/version.map renamed from drivers/vdpa/mlx5/rte_pmd_mlx5_vdpa_version.map +0 -0
similarity index 100%
rename from drivers/vdpa/mlx5/rte_pmd_mlx5_vdpa_version.map
rename to drivers/vdpa/mlx5/version.map
lib/librte_acl/version.map renamed from lib/librte_acl/rte_acl_version.map +0 -0
similarity index 100%
rename from lib/librte_acl/rte_acl_version.map
rename to lib/librte_acl/version.map
lib/librte_bbdev/version.map renamed from lib/librte_bbdev/rte_bbdev_version.map +0 -0
similarity index 100%
rename from lib/librte_bbdev/rte_bbdev_version.map
rename to lib/librte_bbdev/version.map
lib/librte_bitratestats/version.map renamed from lib/librte_bitratestats/rte_bitratestats_version.map +0 -0
similarity index 100%
rename from lib/librte_bitratestats/rte_bitratestats_version.map
rename to lib/librte_bitratestats/version.map
lib/librte_bpf/version.map renamed from lib/librte_bpf/rte_bpf_version.map +0 -0
similarity index 100%
rename from lib/librte_bpf/rte_bpf_version.map
rename to lib/librte_bpf/version.map
lib/librte_cfgfile/version.map renamed from lib/librte_cfgfile/rte_cfgfile_version.map +0 -0
similarity index 100%
rename from lib/librte_cfgfile/rte_cfgfile_version.map
rename to lib/librte_cfgfile/version.map
lib/librte_cmdline/version.map renamed from lib/librte_cmdline/rte_cmdline_version.map +0 -0
similarity index 100%
rename from lib/librte_cmdline/rte_cmdline_version.map
rename to lib/librte_cmdline/version.map
lib/librte_compressdev/version.map renamed from lib/librte_compressdev/rte_compressdev_version.map +0 -0
similarity index 100%
rename from lib/librte_compressdev/rte_compressdev_version.map
rename to lib/librte_compressdev/version.map
lib/librte_cryptodev/version.map renamed from lib/librte_cryptodev/rte_cryptodev_version.map +0 -0
similarity index 100%
rename from lib/librte_cryptodev/rte_cryptodev_version.map
rename to lib/librte_cryptodev/version.map
lib/librte_distributor/version.map renamed from lib/librte_distributor/rte_distributor_version.map +0 -0
similarity index 100%
rename from lib/librte_distributor/rte_distributor_version.map
rename to lib/librte_distributor/version.map
lib/librte_eal/version.map renamed from lib/librte_eal/rte_eal_version.map +0 -0
similarity index 100%
rename from lib/librte_eal/rte_eal_version.map
rename to lib/librte_eal/version.map
lib/librte_efd/version.map renamed from lib/librte_efd/rte_efd_version.map +0 -0
similarity index 100%
rename from lib/librte_efd/rte_efd_version.map
rename to lib/librte_efd/version.map
lib/librte_ethdev/version.map renamed from lib/librte_ethdev/rte_ethdev_version.map +0 -0
similarity index 100%
rename from lib/librte_ethdev/rte_ethdev_version.map
rename to lib/librte_ethdev/version.map
lib/librte_eventdev/version.map renamed from lib/librte_eventdev/rte_eventdev_version.map +0 -0
similarity index 100%
rename from lib/librte_eventdev/rte_eventdev_version.map
rename to lib/librte_eventdev/version.map
lib/librte_fib/version.map renamed from lib/librte_fib/rte_fib_version.map +0 -0
similarity index 100%
rename from lib/librte_fib/rte_fib_version.map
rename to lib/librte_fib/version.map
lib/librte_flow_classify/version.map renamed from lib/librte_flow_classify/rte_flow_classify_version.map +0 -0
similarity index 100%
rename from lib/librte_flow_classify/rte_flow_classify_version.map
rename to lib/librte_flow_classify/version.map
lib/librte_graph/version.map renamed from lib/librte_graph/rte_graph_version.map +0 -0
similarity index 100%
rename from lib/librte_graph/rte_graph_version.map
rename to lib/librte_graph/version.map
lib/librte_gro/version.map renamed from lib/librte_gro/rte_gro_version.map +0 -0
similarity index 100%
rename from lib/librte_gro/rte_gro_version.map
rename to lib/librte_gro/version.map
lib/librte_gso/version.map renamed from lib/librte_gso/rte_gso_version.map +0 -0
similarity index 100%
rename from lib/librte_gso/rte_gso_version.map
rename to lib/librte_gso/version.map
lib/librte_hash/version.map renamed from lib/librte_hash/rte_hash_version.map +0 -0
similarity index 100%
rename from lib/librte_hash/rte_hash_version.map
rename to lib/librte_hash/version.map
lib/librte_ip_frag/version.map renamed from lib/librte_ip_frag/rte_ip_frag_version.map +0 -0
similarity index 100%
rename from lib/librte_ip_frag/rte_ip_frag_version.map
rename to lib/librte_ip_frag/version.map
lib/librte_ipsec/version.map renamed from lib/librte_ipsec/rte_ipsec_version.map +0 -0
similarity index 100%
rename from lib/librte_ipsec/rte_ipsec_version.map
rename to lib/librte_ipsec/version.map
lib/librte_jobstats/version.map renamed from lib/librte_jobstats/rte_jobstats_version.map +0 -0
similarity index 100%
rename from lib/librte_jobstats/rte_jobstats_version.map
rename to lib/librte_jobstats/version.map
lib/librte_kni/version.map renamed from lib/librte_kni/rte_kni_version.map +0 -0
similarity index 100%
rename from lib/librte_kni/rte_kni_version.map
rename to lib/librte_kni/version.map
lib/librte_kvargs/version.map renamed from lib/librte_kvargs/rte_kvargs_version.map +0 -0
similarity index 100%
rename from lib/librte_kvargs/rte_kvargs_version.map
rename to lib/librte_kvargs/version.map
lib/librte_latencystats/version.map renamed from lib/librte_latencystats/rte_latencystats_version.map +0 -0
similarity index 100%
rename from lib/librte_latencystats/rte_latencystats_version.map
rename to lib/librte_latencystats/version.map
lib/librte_lpm/version.map renamed from lib/librte_lpm/rte_lpm_version.map +0 -0
similarity index 100%
rename from lib/librte_lpm/rte_lpm_version.map
rename to lib/librte_lpm/version.map
lib/librte_mbuf/version.map renamed from lib/librte_mbuf/rte_mbuf_version.map +0 -0
similarity index 100%
rename from lib/librte_mbuf/rte_mbuf_version.map
rename to lib/librte_mbuf/version.map
lib/librte_member/version.map renamed from lib/librte_member/rte_member_version.map +0 -0
similarity index 100%
rename from lib/librte_member/rte_member_version.map
rename to lib/librte_member/version.map
lib/librte_mempool/version.map renamed from lib/librte_mempool/rte_mempool_version.map +0 -0
similarity index 100%
rename from lib/librte_mempool/rte_mempool_version.map
rename to lib/librte_mempool/version.map
lib/librte_meter/version.map renamed from lib/librte_meter/rte_meter_version.map +0 -0
similarity index 100%
rename from lib/librte_meter/rte_meter_version.map
rename to lib/librte_meter/version.map
lib/librte_metrics/version.map renamed from lib/librte_metrics/rte_metrics_version.map +0 -0
similarity index 100%
rename from lib/librte_metrics/rte_metrics_version.map
rename to lib/librte_metrics/version.map
lib/librte_net/version.map renamed from lib/librte_net/rte_net_version.map +0 -0
similarity index 100%
rename from lib/librte_net/rte_net_version.map
rename to lib/librte_net/version.map
lib/librte_node/version.map renamed from lib/librte_node/rte_node_version.map +0 -0
similarity index 100%
rename from lib/librte_node/rte_node_version.map
rename to lib/librte_node/version.map
lib/librte_pci/version.map renamed from lib/librte_pci/rte_pci_version.map +0 -0
similarity index 100%
rename from lib/librte_pci/rte_pci_version.map
rename to lib/librte_pci/version.map
lib/librte_pdump/version.map renamed from lib/librte_pdump/rte_pdump_version.map +0 -0
similarity index 100%
rename from lib/librte_pdump/rte_pdump_version.map
rename to lib/librte_pdump/version.map
lib/librte_pipeline/version.map renamed from lib/librte_pipeline/rte_pipeline_version.map +0 -0
similarity index 100%
rename from lib/librte_pipeline/rte_pipeline_version.map
rename to lib/librte_pipeline/version.map
lib/librte_port/version.map renamed from lib/librte_port/rte_port_version.map +0 -0
similarity index 100%
rename from lib/librte_port/rte_port_version.map
rename to lib/librte_port/version.map
lib/librte_power/version.map renamed from lib/librte_power/rte_power_version.map +0 -0
similarity index 100%
rename from lib/librte_power/rte_power_version.map
rename to lib/librte_power/version.map
lib/librte_rawdev/version.map renamed from lib/librte_rawdev/rte_rawdev_version.map +0 -0
similarity index 100%
rename from lib/librte_rawdev/rte_rawdev_version.map
rename to lib/librte_rawdev/version.map
lib/librte_rcu/version.map renamed from lib/librte_rcu/rte_rcu_version.map +0 -0
similarity index 100%
rename from lib/librte_rcu/rte_rcu_version.map
rename to lib/librte_rcu/version.map
lib/librte_regexdev/version.map renamed from lib/librte_regexdev/rte_regexdev_version.map +0 -0
similarity index 100%
rename from lib/librte_regexdev/rte_regexdev_version.map
rename to lib/librte_regexdev/version.map
lib/librte_reorder/version.map renamed from lib/librte_reorder/rte_reorder_version.map +0 -0
similarity index 100%
rename from lib/librte_reorder/rte_reorder_version.map
rename to lib/librte_reorder/version.map
lib/librte_rib/version.map renamed from lib/librte_rib/rte_rib_version.map +0 -0
similarity index 100%
rename from lib/librte_rib/rte_rib_version.map
rename to lib/librte_rib/version.map
lib/librte_ring/version.map renamed from lib/librte_ring/rte_ring_version.map +0 -0
similarity index 100%
rename from lib/librte_ring/rte_ring_version.map
rename to lib/librte_ring/version.map
lib/librte_sched/version.map renamed from lib/librte_sched/rte_sched_version.map +0 -0
similarity index 100%
rename from lib/librte_sched/rte_sched_version.map
rename to lib/librte_sched/version.map
lib/librte_security/version.map renamed from lib/librte_security/rte_security_version.map +0 -0
similarity index 100%
rename from lib/librte_security/rte_security_version.map
rename to lib/librte_security/version.map
lib/librte_stack/version.map renamed from lib/librte_stack/rte_stack_version.map +0 -0
similarity index 100%
rename from lib/librte_stack/rte_stack_version.map
rename to lib/librte_stack/version.map
lib/librte_table/version.map renamed from lib/librte_table/rte_table_version.map +0 -0
similarity index 100%
rename from lib/librte_table/rte_table_version.map
rename to lib/librte_table/version.map
lib/librte_telemetry/version.map renamed from lib/librte_telemetry/rte_telemetry_version.map +0 -0
similarity index 100%
rename from lib/librte_telemetry/rte_telemetry_version.map
rename to lib/librte_telemetry/version.map
lib/librte_timer/version.map renamed from lib/librte_timer/rte_timer_version.map +0 -0
similarity index 100%
rename from lib/librte_timer/rte_timer_version.map
rename to lib/librte_timer/version.map
lib/librte_vhost/version.map renamed from lib/librte_vhost/rte_vhost_version.map +0 -0
similarity index 100%
rename from lib/librte_vhost/rte_vhost_version.map
rename to lib/librte_vhost/version.map
lib/meson.build +2 -2
index d8b358e5f4..3ea26db204 100644
@@ -138,8 +138,8 @@ foreach l:libraries
 				# RTE_BUILD_SHARED_LIB defined
 				cflags += '-DRTE_BUILD_SHARED_LIB'
 			endif
-			version_map = '@0@/@1@/rte_@2@_version.map'.format(
-					meson.current_source_dir(), dir_name, name)
+			version_map = '@0@/@1@/version.map'.format(
+					meson.current_source_dir(), dir_name)
 			implib = dir_name + '.dll.a'
 
 			def_file = custom_target(libname + '_def',
Signature · 1 line
2.25.1
#22 lore raw

RFC PATCH v2 6/8 build: standardize component names and defines

In reply to Bruce Richardson

As discussed on the dpdk-dev mailing list[1], we can make some easy improvements in standardizing the naming of the various components in DPDK, and their associated feature-enabled macros.

Following this patch, each library will have the name in format, 'librte_<name>.so', and the macro indicating that library is enabled in the build will have the form 'RTE_LIB_<NAME>'.

Similarly, for libraries, the equivalent name formats and macros are:
'librte_<class>_<name>.so' and 'RTE_<CLASS>_<NAME>', where class is the device type taken from the relevant driver subdirectory name, i.e. 'net', 'crypto' etc.

To avoid too many changes at once for end applications, the old macro names will still be provided in the build in this release, but will be removed subsequently.

[1] http://inbox.dpdk.org/dev/[email protected]/t/#u

---
 app/test-bbdev/meson.build            |  4 ++--
 app/test-crypto-perf/meson.build      |  2 +-
 app/test-pmd/meson.build              | 12 ++++++------
 app/test/meson.build                  |  8 ++++----
 doc/guides/rel_notes/deprecation.rst  |  8 ++++++++
 drivers/baseband/meson.build          |  1 -
 drivers/bus/meson.build               |  1 -
 drivers/common/meson.build            |  1 -
 drivers/common/mlx5/meson.build       |  1 -
 drivers/common/qat/meson.build        |  1 -
 drivers/compress/meson.build          |  1 -
 drivers/compress/octeontx/meson.build |  2 +-
 drivers/crypto/meson.build            |  1 -
 drivers/crypto/null/meson.build       |  2 +-
 drivers/crypto/octeontx/meson.build   |  2 +-
 drivers/crypto/octeontx2/meson.build  |  2 +-
 drivers/crypto/scheduler/meson.build  |  2 +-
 drivers/crypto/virtio/meson.build     |  2 +-
 drivers/event/dpaa/meson.build        |  2 +-
 drivers/event/dpaa2/meson.build       |  2 +-
 drivers/event/meson.build             |  1 -
 drivers/event/octeontx/meson.build    |  2 +-
 drivers/event/octeontx2/meson.build   |  2 +-
 drivers/mempool/meson.build           |  1 -
 drivers/meson.build                   |  9 ++++-----
 drivers/net/meson.build               |  1 -
 drivers/net/mlx4/meson.build          |  2 +-
 drivers/raw/ifpga/meson.build         |  2 +-
 drivers/raw/meson.build               |  1 -
 drivers/regex/meson.build             |  1 -
 drivers/vdpa/meson.build              |  1 -
 examples/bond/meson.build             |  2 +-
 examples/ethtool/meson.build          |  2 +-
 examples/ioat/meson.build             |  2 +-
 examples/l2fwd-crypto/meson.build     |  2 +-
 examples/ntb/meson.build              |  2 +-
 examples/vm_power_manager/meson.build |  6 +++---
 lib/librte_ethdev/meson.build         |  1 -
 lib/librte_graph/meson.build          |  2 --
 lib/meson.build                       |  3 ++-
 40 files changed, 47 insertions(+), 55 deletions(-)
app/test-bbdev/meson.build +2 -2
index 18ab6a8c6c..178306b08c 100644
@@ -7,8 +7,8 @@ sources = files('main.c',
 		'test_bbdev_vector.c')
 deps += ['bbdev', 'bus_vdev']
 if dpdk_conf.has('RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC')
-	deps += ['pmd_bbdev_fpga_lte_fec']
+	deps += ['baseband_fpga_lte_fec']
 endif
 if dpdk_conf.has('RTE_LIBRTE_PMD_BBDEV_FPGA_5GNR_FEC')
-	deps += ['pmd_bbdev_fpga_5gnr_fec']
+	deps += ['baseband_fpga_5gnr_fec']
 endif
app/test-crypto-perf/meson.build +1 -1
index 4bd71510dc..e6ddda6f0c 100644
@@ -13,5 +13,5 @@ sources = files('cperf_ops.c',
 		'main.c')
 deps += ['cryptodev', 'net', 'security']
 if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER')
-	deps += 'pmd_crypto_scheduler'
+	deps += 'crypto_scheduler'
 endif
app/test-pmd/meson.build +6 -6
index 0d9e450494..2e8b9f8a99 100644
@@ -38,22 +38,22 @@ if dpdk_conf.has('RTE_LIBRTE_LATENCYSTATS')
 	deps += 'latencystats'
 endif
 if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER')
-	deps += 'pmd_crypto_scheduler'
+	deps += 'crypto_scheduler'
 endif
 if dpdk_conf.has('RTE_LIBRTE_BOND_PMD')
-	deps += 'pmd_bond'
+	deps += 'net_bond'
 endif
 if dpdk_conf.has('RTE_LIBRTE_BNXT_PMD')
-	deps += 'pmd_bnxt'
+	deps += 'net_bnxt'
 endif
 if dpdk_conf.has('RTE_LIBRTE_I40E_PMD')
-	deps += 'pmd_i40e'
+	deps += 'net_i40e'
 endif
 if dpdk_conf.has('RTE_LIBRTE_IXGBE_PMD')
-	deps += 'pmd_ixgbe'
+	deps += 'net_ixgbe'
 endif
 if dpdk_conf.has('RTE_LIBRTE_DPAA_PMD')
-	deps += ['bus_dpaa', 'mempool_dpaa', 'pmd_dpaa']
+	deps += ['bus_dpaa', 'mempool_dpaa', 'net_dpaa']
 endif
 if dpdk_conf.has('RTE_LIBRTE_BPF')
 	sources += files('bpf_cmd.c')
app/test/meson.build +4 -4
index 781555f9de..d3ae9c91ac 100644
@@ -344,10 +344,10 @@ if dpdk_conf.has('RTE_LIBRTE_STACK_MEMPOOL')
 	test_deps += 'mempool_stack'
 endif
 if dpdk_conf.has('RTE_LIBRTE_SKELETON_EVENTDEV_PMD')
-	test_deps += 'pmd_skeleton_event'
+	test_deps += 'event_skeleton'
 endif
 if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER')
-	test_deps += 'pmd_crypto_scheduler'
+	test_deps += 'crypto_scheduler'
 endif
 if dpdk_conf.has('RTE_LIBRTE_TELEMETRY')
 	test_sources += 'test_telemetry_json.c'
@@ -357,7 +357,7 @@ endif
 # The following linkages of drivers are required because
 # they are used via a driver-specific API.
 if dpdk_conf.has('RTE_LIBRTE_BOND_PMD')
-	test_deps += 'pmd_bond'
+	test_deps += 'net_bond'
 	test_sources += ['test_link_bonding.c', 'test_link_bonding_rssconf.c']
 	driver_test_names += ['link_bonding_autotest', 'link_bonding_rssconf_autotest']
 	if dpdk_conf.has('RTE_LIBRTE_RING_PMD')
@@ -366,7 +366,7 @@ if dpdk_conf.has('RTE_LIBRTE_BOND_PMD')
 	endif
 endif
 if dpdk_conf.has('RTE_LIBRTE_RING_PMD')
-	test_deps += 'pmd_ring'
+	test_deps += 'net_ring'
 	test_sources += 'test_pmd_ring_perf.c'
 	test_sources += 'test_pmd_ring.c'
 	test_sources += 'test_event_eth_tx_adapter.c'
doc/guides/rel_notes/deprecation.rst +8 -0
index 0be208edca..dafabdfaa5 100644
@@ -11,6 +11,14 @@ here.
 Deprecation Notices
 -------------------
 
+* build: The macros defined to indicate which DPDK libraries and drivers
+  are included in the meson build are changing to a standardized format of
+  ``RTE_LIB_<NAME>`` and ``RTE_<CLASS>_<NAME>``, where ``NAME`` is the
+  upper-case component name, e.g. EAL, ETHDEV, IXGBE, and ``CLASS`` is the
+  upper-case name of the device class to which a driver belongs e.g.
+  ``NET``, ``CRYPTO``, ``VDPA``. The old macros are deprecated and will be
+  removed in a future release.
+
 * meson: The minimum supported version of meson for configuring and building
   DPDK will be increased to v0.47.1 (from 0.41) from DPDK 19.05 onwards. For
   those users with a version earlier than 0.47.1, an updated copy of meson
drivers/baseband/meson.build +0 -1
index 415b6724b1..7e1b64ffdd 100644
@@ -8,4 +8,3 @@ endif
 drivers = ['null', 'turbo_sw', 'fpga_lte_fec', 'fpga_5gnr_fec']
 
 config_flag_fmt = 'RTE_LIBRTE_PMD_BBDEV_@0@'
-driver_name_fmt = 'rte_pmd_bbdev_@0@'
drivers/bus/meson.build +0 -1
index 80de2d91d5..bd73efd187 100644
@@ -4,4 +4,3 @@
 drivers = ['dpaa', 'fslmc', 'ifpga', 'pci', 'vdev', 'vmbus']
 std_deps = ['eal']
 config_flag_fmt = 'RTE_LIBRTE_@0@_BUS'
-driver_name_fmt = 'rte_bus_@0@'
drivers/common/meson.build +0 -1
index abb4f1529a..d78882f05e 100644
@@ -8,4 +8,3 @@ endif
 std_deps = ['eal']
 drivers = ['cpt', 'dpaax', 'iavf', 'mvep', 'octeontx', 'octeontx2', 'sfc_efx']
 config_flag_fmt = 'RTE_LIBRTE_@0@_COMMON'
-driver_name_fmt = 'rte_common_@0@'
drivers/common/mlx5/meson.build +0 -1
index 8e5608703e..3dacc6f683 100644
@@ -8,7 +8,6 @@ if not is_linux
 endif
 
 config_flag_fmt = 'RTE_LIBRTE_@0@_COMMON'
-driver_name_fmt = 'rte_common_@0@'
 deps += ['hash', 'pci', 'bus_pci', 'net', 'eal', 'kvargs']
 sources += files(
 	'mlx5_devx_cmds.c',
drivers/common/qat/meson.build +0 -1
index 3409162d03..fdf8b84f89 100644
@@ -2,7 +2,6 @@
 # Copyright(c) 2017-2018 Intel Corporation
 
 config_flag_fmt = 'RTE_LIBRTE_@0@_COMMON'
-driver_name_fmt = 'rte_common_@0@'
 
 qat_crypto = true
 qat_crypto_path = 'crypto/qat'
drivers/compress/meson.build +0 -1
index 3a4723c0ce..33f5e33dde 100644
@@ -9,4 +9,3 @@ drivers = ['isal', 'octeontx', 'zlib']
 
 std_deps = ['compressdev'] # compressdev pulls in all other needed deps
 config_flag_fmt = 'RTE_LIBRTE_PMD_@0@'
-driver_name_fmt = 'rte_pmd_@0@'
drivers/compress/octeontx/meson.build +1 -1
index 0dc98b7627..2d71b4da21 100644
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: BSD-3-Clause
 # Copyright(c) 2018 Cavium, Inc
 
-name = 'octeontx_compress'
+fmt_name = 'octeontx_compress'
 sources = files('otx_zip.c', 'otx_zip_pmd.c')
 includes += include_directories('include')
 deps += ['mempool_octeontx', 'bus_pci']
drivers/crypto/meson.build +0 -1
index bd7a940e6d..fa5c7ef3a5 100644
@@ -26,4 +26,3 @@ drivers = ['aesni_gcm',
 
 std_deps = ['cryptodev'] # cryptodev pulls in all other needed deps
 config_flag_fmt = 'RTE_LIBRTE_PMD_@0@'
-driver_name_fmt = 'rte_pmd_@0@'
drivers/crypto/null/meson.build +1 -1
index 502336da2b..421414916c 100644
@@ -2,5 +2,5 @@
 # Copyright(c) 2017 Intel Corporation
 
 deps += 'bus_vdev'
-name = 'null_crypto'
+fmt_name = 'null_crypto'
 sources = files('null_crypto_pmd.c', 'null_crypto_pmd_ops.c')
drivers/crypto/octeontx/meson.build +1 -1
index cf031b006c..d6939720d8 100644
@@ -7,7 +7,7 @@ endif
 
 deps += ['bus_pci']
 deps += ['common_cpt']
-name = 'octeontx_crypto'
+fmt_name = 'octeontx_crypto'
 
 sources = files('otx_cryptodev.c',
 		'otx_cryptodev_capabilities.c',
drivers/crypto/octeontx2/meson.build +1 -1
index 148ec184a6..bf502e247d 100644
@@ -11,7 +11,7 @@ deps += ['common_cpt']
 deps += ['common_octeontx2']
 deps += ['ethdev']
 deps += ['security']
-name = 'octeontx2_crypto'
+fmt_name = 'octeontx2_crypto'
 
 sources = files('otx2_cryptodev.c',
 		'otx2_cryptodev_capabilities.c',
drivers/crypto/scheduler/meson.build +1 -1
index c5ba2d6804..2209c50232 100644
@@ -2,7 +2,7 @@
 # Copyright(c) 2018 Luca Boccassi <[email protected]>
 
 deps += ['bus_vdev', 'reorder']
-name = 'crypto_scheduler'
+fmt_name = 'crypto_scheduler'
 sources = files(
 	'rte_cryptodev_scheduler.c',
 	'scheduler_failover.c',
drivers/crypto/virtio/meson.build +1 -1
index b15b3f9fab..6cea782deb 100644
@@ -3,6 +3,6 @@
 
 includes += include_directories('../../../lib/librte_vhost')
 deps += 'bus_pci'
-name = 'virtio_crypto'
+fmt_name = 'virtio_crypto'
 sources = files('virtio_cryptodev.c', 'virtio_pci.c',
 		'virtio_rxtx.c', 'virtqueue.c')
drivers/event/dpaa/meson.build +1 -1
index 2f761f8e5b..9abb75e3e9 100644
@@ -5,7 +5,7 @@ if not is_linux
 	build = false
 	reason = 'only supported on linux'
 endif
-deps += ['pmd_dpaa', 'pmd_dpaa_sec']
+deps += ['net_dpaa', 'crypto_dpaa_sec']
 sources = files('dpaa_eventdev.c')
 
 includes += include_directories('../../crypto/dpaa_sec/')
drivers/event/dpaa2/meson.build +1 -1
index 71c8be3d6e..4ead7bb3e9 100644
@@ -5,7 +5,7 @@ if not is_linux
 	build = false
 	reason = 'only supported on linux'
 endif
-deps += ['bus_vdev', 'pmd_dpaa2', 'pmd_dpaa2_sec']
+deps += ['bus_vdev', 'net_dpaa2', 'crypto_dpaa2_sec']
 sources = files('dpaa2_hw_dpcon.c',
 		'dpaa2_eventdev.c',
 		'dpaa2_eventdev_selftest.c')
drivers/event/meson.build +0 -1
index f2a3431472..a7dac99de2 100644
@@ -12,4 +12,3 @@ if not (toolchain == 'gcc' and cc.version().version_compare('<4.8.6') and
 endif
 std_deps = ['eventdev', 'kvargs']
 config_flag_fmt = 'RTE_LIBRTE_PMD_@0@_EVENTDEV'
-driver_name_fmt = 'rte_pmd_@0@_event'
drivers/event/octeontx/meson.build +1 -1
index 2b74bb62de..41e367684c 100644
@@ -10,4 +10,4 @@ sources = files('ssovf_worker.c',
 		'timvf_probe.c'
 )
 
-deps += ['common_octeontx', 'mempool_octeontx', 'bus_vdev', 'pmd_octeontx']
+deps += ['common_octeontx', 'mempool_octeontx', 'bus_vdev', 'net_octeontx']
drivers/event/octeontx2/meson.build +1 -1
index 0ade51cec7..3e5eb37d24 100644
@@ -24,6 +24,6 @@ foreach flag: extra_flags
 	endif
 endforeach
 
-deps += ['bus_pci', 'common_octeontx2', 'mempool_octeontx2', 'pmd_octeontx2']
+deps += ['bus_pci', 'common_octeontx2', 'mempool_octeontx2', 'net_octeontx2']
 
 includes += include_directories('../../crypto/octeontx2')
drivers/mempool/meson.build +0 -1
index c9609f1453..036647149e 100644
@@ -8,4 +8,3 @@ endif
 drivers = ['bucket', 'dpaa', 'dpaa2', 'octeontx', 'octeontx2', 'ring', 'stack']
 std_deps = ['mempool']
 config_flag_fmt = 'RTE_LIBRTE_@0@_MEMPOOL'
-driver_name_fmt = 'rte_mempool_@0@'
drivers/meson.build +4 -5
index 3d4bbff13b..a5a6fed06e 100644
@@ -33,9 +33,6 @@ foreach subpath:subdirs
 	drivers = []
 	std_deps = []
 	config_flag_fmt = '' # format string used to set the value in dpdk_conf
-	driver_name_fmt = '' # format string for driver name, used to name
-	                     # the library, the dependency and to find the
-	                     # version file for linking
 
 	# subpath can be either "class" or "class/driver"
 	if subpath.contains('/')
@@ -113,11 +110,14 @@ foreach subpath:subdirs
 			endif
 		else
 			enabled_drivers += name
+			lib_name = '_'.join(['rte', class, name])
+			dpdk_conf.set(lib_name.to_upper(), 1)
 
 			if fmt_name == ''
 				fmt_name = name
 			endif
-			dpdk_conf.set(config_flag_fmt.format(fmt_name.to_upper()),1)
+
+			dpdk_conf.set(config_flag_fmt.format(fmt_name.to_upper()),1) #old-style macro
 			# for driver compatibility, since we changed the
 			# default to match that of make. Remove in future release
 			# after following deprecation process
@@ -133,7 +133,6 @@ foreach subpath:subdirs
 				dpdk_conf.set(alt_flag_fmt.format(
 						fmt_name.to_upper()), 1)
 			endif
-			lib_name = driver_name_fmt.format(fmt_name)
 
 			dpdk_extra_ldflags += pkgconfig_extra_libs
 
drivers/net/meson.build +0 -1
index d56b24051a..4e4c2c976a 100644
@@ -59,4 +59,3 @@ std_deps = ['ethdev', 'kvargs'] # 'ethdev' also pulls in mbuf, net, eal etc
 std_deps += ['bus_pci']         # very many PMDs depend on PCI, so make std
 std_deps += ['bus_vdev']        # same with vdev bus
 config_flag_fmt = 'RTE_LIBRTE_@0@_PMD'
-driver_name_fmt = 'rte_pmd_@0@'
drivers/net/mlx4/meson.build +1 -1
index 5a25e11a7b..4040065150 100644
@@ -116,7 +116,7 @@ configure_file(output : 'mlx4_autoconf.h', configuration : config)
 # Build Glue Library
 if dlopen_ibverbs
 	dlopen_name = 'mlx4_glue'
-	dlopen_lib_name = driver_name_fmt.format(dlopen_name)
+	dlopen_lib_name = 'rte_net_' + dlopen_name
 	dlopen_so_version = LIB_GLUE_VERSION
 	dlopen_sources = files('mlx4_glue.c')
 	dlopen_install_dir = [ eal_pmd_path + '-glue' ]
drivers/raw/ifpga/meson.build +1 -1
index da454b1942..027ff80562 100644
@@ -11,7 +11,7 @@ subdir('base')
 objs = [base_objs]
 
 deps += ['ethdev', 'rawdev', 'pci', 'bus_pci', 'kvargs',
-	'bus_vdev', 'bus_ifpga', 'net', 'pmd_i40e', 'pmd_ipn3ke']
+	'bus_vdev', 'bus_ifpga', 'net', 'net_i40e', 'net_ipn3ke']
 
 sources = files('ifpga_rawdev.c')
 
drivers/raw/meson.build +0 -1
index 2c1e65ec79..d8d6cf5824 100644
@@ -12,4 +12,3 @@ drivers = ['dpaa2_cmdif', 'dpaa2_qdma',
 	'skeleton']
 std_deps = ['rawdev']
 config_flag_fmt = 'RTE_LIBRTE_PMD_@0@_RAWDEV'
-driver_name_fmt = 'rte_rawdev_@0@'
drivers/regex/meson.build +0 -1
index 8edeba3a0a..f171e9fdf0 100644
@@ -4,4 +4,3 @@
 drivers = ['mlx5']
 std_deps = ['ethdev', 'kvargs'] # 'ethdev' also pulls in mbuf, net, eal etc
 config_flag_fmt = 'RTE_LIBRTE_@0@_PMD'
-driver_name_fmt = 'rte_pmd_@0@'
drivers/vdpa/meson.build +0 -1
index 798eb38305..b346e43086 100644
@@ -10,4 +10,3 @@ drivers = ['ifc',
 std_deps = ['bus_pci', 'kvargs']
 std_deps += ['vhost']
 config_flag_fmt = 'RTE_LIBRTE_@0@_PMD'
-driver_name_fmt = 'rte_pmd_@0@'
examples/bond/meson.build +1 -1
index 82e355a492..69382ffcd2 100644
@@ -6,7 +6,7 @@
 # To build this example as a standalone application with an already-installed
 # DPDK instance, use 'make'
 
-deps += 'pmd_bond'
+deps += 'net_bond'
 allow_experimental_apis = true
 sources = files(
 	'main.c'
examples/ethtool/meson.build +1 -1
index bc7a35514c..fdfdd1971e 100644
@@ -14,7 +14,7 @@ includes = include_directories('lib', 'ethtool-app')
 
 deps += 'bus_pci'
 if dpdk_conf.has('RTE_LIBRTE_IXGBE_PMD')
-	deps += 'pmd_ixgbe'
+	deps += 'net_ixgbe'
 endif
 
 allow_experimental_apis = true
examples/ioat/meson.build +1 -1
index f72cf70e7e..f1a045a0a6 100644
@@ -9,7 +9,7 @@
 allow_experimental_apis = true
 build = dpdk_conf.has('RTE_LIBRTE_PMD_IOAT_RAWDEV')
 
-deps += ['rawdev_ioat']
+deps += ['raw_ioat']
 
 sources = files(
 	'ioatfwd.c'
examples/l2fwd-crypto/meson.build +1 -1
index 39e1604fac..9002d62a6c 100644
@@ -8,7 +8,7 @@
 
 deps += 'cryptodev'
 if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER')
-	deps += 'pmd_crypto_scheduler'
+	deps += 'crypto_scheduler'
 endif
 allow_experimental_apis = true
 sources = files(
examples/ntb/meson.build +1 -1
index 45a59350c5..bac6e5cd23 100644
@@ -16,5 +16,5 @@ sources = files(
 	'ntb_fwd.c'
 )
 if dpdk_conf.has('RTE_LIBRTE_PMD_NTB_RAWDEV')
-	deps += 'rawdev_ntb'
+	deps += 'raw_ntb'
 endif
examples/vm_power_manager/meson.build +3 -3
index 54e2b584f6..2dd132015f 100644
@@ -14,15 +14,15 @@ endif
 deps += ['power']
 
 if dpdk_conf.has('RTE_LIBRTE_BNXT_PMD')
-	deps += ['pmd_bnxt']
+	deps += ['net_bnxt']
 endif
 
 if dpdk_conf.has('RTE_LIBRTE_I40E_PMD')
-	deps += ['pmd_i40e']
+	deps += ['net_i40e']
 endif
 
 if dpdk_conf.has('RTE_LIBRTE_IXGBE_PMD')
-	deps += ['pmd_ixgbe']
+	deps += ['net_ixgbe']
 endif
 
 allow_experimental_apis = true
lib/librte_ethdev/meson.build +0 -1
index 8fc24e8c8a..e4b610246f 100644
@@ -1,7 +1,6 @@
 # SPDX-License-Identifier: BSD-3-Clause
 # Copyright(c) 2017 Intel Corporation
 
-name = 'ethdev'
 sources = files('ethdev_private.c',
 	'ethdev_profile.c',
 	'ethdev_trace_points.c',
lib/librte_graph/meson.build +0 -2
index d5de1e250a..d3ec78ca62 100644
@@ -1,8 +1,6 @@
 # SPDX-License-Identifier: BSD-3-Clause
 # Copyright(C) 2020 Marvell International Ltd.
 
-name = 'graph'
-
 sources = files('node.c', 'graph.c', 'graph_ops.c', 'graph_debug.c', 'graph_stats.c', 'graph_populate.c')
 headers = files('rte_graph.h', 'rte_graph_worker.h')
 
lib/meson.build +2 -1
index 3ea26db204..38678a7fb5 100644
@@ -97,7 +97,8 @@ foreach l:libraries
 		set_variable(name.underscorify() + '_disable_reason', reason)
 	else
 		enabled_libs += name
-		dpdk_conf.set('RTE_LIBRTE_' + name.to_upper(), 1)
+		dpdk_conf.set('RTE_LIBRTE_' + name.to_upper(), 1) #old macro
+		dpdk_conf.set('RTE_LIB_' + name.to_upper(), 1) # new macro
 		install_headers(headers)
 
 		libname = 'rte_' + name
Signature · 1 line
2.25.1
#23 lore raw

RFC PATCH v2 7/8 build: replace use of old build macros

In reply to Bruce Richardson

Use the newer macros defined by meson in all DPDK source code, to ensure there are no errors when the old non-standard macros are removed.

---
 app/proc-info/main.c                          |   4 +-
 app/test-bbdev/meson.build                    |   4 +-
 app/test-bbdev/test_bbdev_perf.c              |   8 +-
 app/test-crypto-perf/cperf_ops.c              |   6 +-
 app/test-crypto-perf/cperf_options.h          |   6 +-
 app/test-crypto-perf/cperf_options_parsing.c  |  16 +-
 .../cperf_test_pmd_cyclecount.c               |   2 +-
 app/test-crypto-perf/cperf_test_throughput.c  |   2 +-
 app/test-crypto-perf/main.c                   |   6 +-
 app/test-crypto-perf/meson.build              |   2 +-
 app/test-pipeline/main.c                      |   2 +-
 app/test-pmd/bpf_cmd.h                        |   4 +-
 app/test-pmd/cmdline.c                        | 190 +++++++++---------
 app/test-pmd/config.c                         |  18 +-
 app/test-pmd/meson.build                      |  22 +-
 app/test-pmd/parameters.c                     |  30 +--
 app/test-pmd/testpmd.c                        |  38 ++--
 app/test-pmd/testpmd.h                        |   4 +-
 app/test/meson.build                          |  26 +--
 app/test/process.h                            |  16 +-
 app/test/test.c                               |  20 +-
 app/test/test_cryptodev.c                     |  26 +--
 app/test/test_cryptodev_hash_test_vectors.h   |   2 +-
 app/test/test_eal_flags.c                     |   4 +-
 app/test/test_func_reentrancy.c               |  24 +--
 app/test/test_kni.c                           |   2 +-
 app/test/test_mp_secondary.c                  |  12 +-
 app/test/test_power.c                         |   2 +-
 app/test/test_power_cpufreq.c                 |   2 +-
 app/test/test_power_kvm_vm.c                  |   2 +-
 app/test/test_table.c                         |   2 +-
 app/test/test_table.h                         |   2 +-
 app/test/test_table_combined.h                |   2 +-
 app/test/test_table_tables.h                  |   2 +-
 config/arm/meson.build                        |   6 +-
 drivers/bus/fslmc/portal/dpaa2_hw_dpio.c      |   6 +-
 drivers/compress/qat/qat_comp.h               |   2 +-
 drivers/compress/qat/qat_comp_pmd.h           |   2 +-
 .../crypto/aesni_mb/aesni_mb_pmd_private.h    |   2 +-
 drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c   |  22 +-
 drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h     |   8 +-
 drivers/crypto/dpaa_sec/dpaa_sec.c            |  24 +--
 drivers/crypto/dpaa_sec/dpaa_sec.h            |   8 +-
 drivers/crypto/qat/qat_sym.c                  |   2 +-
 drivers/crypto/qat/qat_sym.h                  |   8 +-
 drivers/crypto/qat/qat_sym_capabilities.h     |   2 +-
 drivers/crypto/qat/qat_sym_pmd.c              |  12 +-
 drivers/crypto/qat/qat_sym_pmd.h              |   2 +-
 drivers/crypto/qat/qat_sym_session.c          |   4 +-
 drivers/crypto/qat/qat_sym_session.h          |   4 +-
 drivers/net/ixgbe/ixgbe_ethdev.c              |   6 +-
 drivers/net/ixgbe/ixgbe_ethdev.h              |   4 +-
 drivers/net/ixgbe/ixgbe_flow.c                |   6 +-
 drivers/net/ixgbe/ixgbe_rxtx.c                |  26 +--
 drivers/net/ixgbe/ixgbe_rxtx.h                |   6 +-
 drivers/net/ixgbe/ixgbe_rxtx_vec_sse.c        |   6 +-
 drivers/net/kni/meson.build                   |   2 +-
 drivers/net/netvsc/meson.build                |   2 +-
 drivers/net/vhost/meson.build                 |   2 +-
 drivers/raw/dpaa2_cmdif/meson.build           |   2 +-
 drivers/raw/dpaa2_qdma/meson.build            |   2 +-
 drivers/raw/ifpga/base/opae_osdep.h           |   2 +-
 drivers/vdpa/ifc/meson.build                  |   2 +-
 examples/distributor/meson.build              |   2 +-
 examples/ethtool/lib/rte_ethtool.c            |   4 +-
 examples/ethtool/meson.build                  |   2 +-
 examples/ioat/meson.build                     |   2 +-
 examples/ip_pipeline/kni.c                    |   4 +-
 examples/ip_pipeline/kni.h                    |   4 +-
 examples/ip_pipeline/pipeline.c               |  14 +-
 examples/kni/meson.build                      |   2 +-
 examples/l2fwd-crypto/main.c                  |   4 +-
 examples/l2fwd-crypto/meson.build             |   2 +-
 examples/l3fwd-power/meson.build              |   2 +-
 examples/ntb/meson.build                      |   2 +-
 examples/vhost_crypto/meson.build             |   2 +-
 examples/vm_power_manager/channel_monitor.c   |   8 +-
 .../vm_power_manager/guest_cli/meson.build    |   2 +-
 examples/vm_power_manager/main.c              |  12 +-
 examples/vm_power_manager/meson.build         |   8 +-
 lib/librte_eal/linux/eal.c                    |   4 +-
 lib/librte_metrics/rte_metrics_telemetry.c    |   4 +-
 lib/librte_metrics/rte_metrics_telemetry.h    |   2 +-
 lib/librte_port/meson.build                   |   2 +-
 lib/meson.build                               |   2 +-
 85 files changed, 391 insertions(+), 391 deletions(-)
app/proc-info/main.c +2 -2
index 64fb83b38d..0fea033bb5 100644
@@ -30,7 +30,7 @@
 #include <rte_string_fns.h>
 #include <rte_metrics.h>
 #include <rte_cycles.h>
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 #include <rte_security.h>
 #endif
 #include <rte_cryptodev.h>
@@ -739,7 +739,7 @@ show_port(void)
 		}
 
 		printf("  - cyrpto context\n");
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 		void *p_ctx = rte_eth_dev_get_sec_ctx(i);
 		printf("\t  -- security context - %p\n", p_ctx);
 
app/test-bbdev/meson.build +2 -2
index 178306b08c..a2bd7dca6b 100644
@@ -6,9 +6,9 @@ sources = files('main.c',
 		'test_bbdev_perf.c',
 		'test_bbdev_vector.c')
 deps += ['bbdev', 'bus_vdev']
-if dpdk_conf.has('RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC')
+if dpdk_conf.has('RTE_BASEBAND_FPGA_LTE_FEC')
 	deps += ['baseband_fpga_lte_fec']
 endif
-if dpdk_conf.has('RTE_LIBRTE_PMD_BBDEV_FPGA_5GNR_FEC')
+if dpdk_conf.has('RTE_BASEBAND_FPGA_5GNR_FEC')
 	deps += ['baseband_fpga_5gnr_fec']
 endif
app/test-bbdev/test_bbdev_perf.c +4 -4
index 45c0d62aca..2e85eccf94 100644
@@ -26,7 +26,7 @@
 #define MAX_QUEUES RTE_MAX_LCORE
 #define TEST_REPETITIONS 1000
 
-#ifdef RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC
+#ifdef RTE_BASEBAND_FPGA_LTE_FEC
 #include <fpga_lte_fec.h>
 #define FPGA_LTE_PF_DRIVER_NAME ("intel_fpga_lte_fec_pf")
 #define FPGA_LTE_VF_DRIVER_NAME ("intel_fpga_lte_fec_vf")
@@ -39,7 +39,7 @@
 #define FLR_4G_TIMEOUT 610
 #endif
 
-#ifdef RTE_LIBRTE_PMD_BBDEV_FPGA_5GNR_FEC
+#ifdef RTE_BASEBAND_FPGA_5GNR_FEC
 #include <rte_pmd_fpga_5gnr_fec.h>
 #define FPGA_5GNR_PF_DRIVER_NAME ("intel_fpga_5gnr_fec_pf")
 #define FPGA_5GNR_VF_DRIVER_NAME ("intel_fpga_5gnr_fec_vf")
@@ -565,7 +565,7 @@ add_bbdev_dev(uint8_t dev_id, struct rte_bbdev_info *info,
 /* Configure fpga lte fec with PF & VF values
  * if '-i' flag is set and using fpga device
  */
-#ifdef RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC
+#ifdef RTE_BASEBAND_FPGA_LTE_FEC
 	if ((get_init_device() == true) &&
 		(!strcmp(info->drv.driver_name, FPGA_LTE_PF_DRIVER_NAME))) {
 		struct fpga_lte_fec_conf conf;
@@ -609,7 +609,7 @@ add_bbdev_dev(uint8_t dev_id, struct rte_bbdev_info *info,
 				info->dev_name);
 	}
 #endif
-#ifdef RTE_LIBRTE_PMD_BBDEV_FPGA_5GNR_FEC
+#ifdef RTE_BASEBAND_FPGA_5GNR_FEC
 	if ((get_init_device() == true) &&
 		(!strcmp(info->drv.driver_name, FPGA_5GNR_PF_DRIVER_NAME))) {
 		struct fpga_5gnr_fec_conf conf;
app/test-crypto-perf/cperf_ops.c +3 -3
index 3da835a9c5..cc45af7f22 100644
@@ -8,7 +8,7 @@
 #include "cperf_ops.h"
 #include "cperf_test_vectors.h"
 
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 static int
 cperf_set_ops_security(struct rte_crypto_op **ops,
 		uint32_t src_buf_offset __rte_unused,
@@ -551,7 +551,7 @@ cperf_create_session(struct rte_mempool *sess_mp,
 	struct rte_crypto_sym_xform aead_xform;
 	struct rte_cryptodev_sym_session *sess = NULL;
 
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 	/*
 	 * security only
 	 */
@@ -844,7 +844,7 @@ cperf_get_op_functions(const struct cperf_options *options,
 			op_fns->populate_ops = cperf_set_ops_cipher;
 		return 0;
 	}
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 	if (options->op_type == CPERF_PDCP) {
 		op_fns->populate_ops = cperf_set_ops_security;
 		return 0;
app/test-crypto-perf/cperf_options.h +3 -3
index 256fabb072..9664a4b343 100644
@@ -7,7 +7,7 @@
 
 #include <rte_crypto.h>
 #include <rte_cryptodev.h>
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 #include <rte_security.h>
 #endif
 
@@ -47,7 +47,7 @@
 
 #define CPERF_DIGEST_SZ		("digest-sz")
 
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 #define CPERF_PDCP_SN_SZ	("pdcp-sn-sz")
 #define CPERF_PDCP_DOMAIN	("pdcp-domain")
 #define CPERF_PDCP_SES_HFN_EN	("pdcp-ses-hfn-en")
@@ -123,7 +123,7 @@ struct cperf_options {
 
 	uint16_t digest_sz;
 
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 	uint16_t pdcp_sn_sz;
 	uint16_t pdcp_ses_hfn_en;
 	enum rte_security_pdcp_domain pdcp_domain;
app/test-crypto-perf/cperf_options_parsing.c +8 -8
index 8e086f88ec..03ed6f5942 100644
@@ -57,7 +57,7 @@ usage(char *progname)
 		" --pmd-cyclecount-delay-ms N: set delay between enqueue\n"
 		"           and dequeue in pmd-cyclecount benchmarking mode\n"
 		" --csv-friendly: enable test result output CSV friendly\n"
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 		" --pdcp-sn-sz N: set PDCP SN size N <5/7/12/15/18>\n"
 		" --pdcp-domain DOMAIN: set PDCP domain <control/user>\n"
 		" --pdcp-ses-hfn-en: enable session based fixed HFN\n"
@@ -631,7 +631,7 @@ parse_digest_sz(struct cperf_options *opts, const char *arg)
 	return parse_uint16_t(&opts->digest_sz, arg);
 }
 
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 static int
 parse_pdcp_sn_sz(struct cperf_options *opts, const char *arg)
 {
@@ -841,7 +841,7 @@ static struct option lgopts[] = {
 
 	{ CPERF_DIGEST_SZ, required_argument, 0, 0 },
 
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 	{ CPERF_PDCP_SN_SZ, required_argument, 0, 0 },
 	{ CPERF_PDCP_DOMAIN, required_argument, 0, 0 },
 	{ CPERF_PDCP_SES_HFN_EN, no_argument, 0, 0 },
@@ -913,7 +913,7 @@ cperf_options_default(struct cperf_options *opts)
 	opts->digest_sz = 12;
 
 	opts->pmdcc_delay = 0;
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 	opts->pdcp_sn_sz = 12;
 	opts->pdcp_domain = RTE_SECURITY_PDCP_MODE_CONTROL;
 	opts->pdcp_ses_hfn_en = 0;
@@ -954,7 +954,7 @@ cperf_opts_parse_long(int opt_idx, struct cperf_options *opts)
 		{ CPERF_AEAD_IV_SZ,	parse_aead_iv_sz },
 		{ CPERF_AEAD_AAD_SZ,	parse_aead_aad_sz },
 		{ CPERF_DIGEST_SZ,	parse_digest_sz },
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 		{ CPERF_PDCP_SN_SZ,	parse_pdcp_sn_sz },
 		{ CPERF_PDCP_DOMAIN,	parse_pdcp_domain },
 		{ CPERF_PDCP_SES_HFN_EN,	parse_pdcp_ses_hfn_en },
@@ -1061,7 +1061,7 @@ check_cipher_buffer_length(struct cperf_options *options)
 	return 0;
 }
 
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 static int
 check_docsis_buffer_length(struct cperf_options *options)
 {
@@ -1215,7 +1215,7 @@ cperf_options_check(struct cperf_options *options)
 			return -EINVAL;
 	}
 
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 	if (options->op_type == CPERF_DOCSIS) {
 		if (check_docsis_buffer_length(options) < 0)
 			return -EINVAL;
@@ -1308,7 +1308,7 @@ cperf_options_dump(struct cperf_options *opts)
 		printf("#\n");
 	}
 
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 	if (opts->op_type == CPERF_DOCSIS) {
 		printf("# docsis header size: %u\n", opts->docsis_hdr_sz);
 		printf("#\n");
app/test-crypto-perf/cperf_test_pmd_cyclecount.c +1 -1
index 69f0943d14..4e67d3aebd 100644
@@ -63,7 +63,7 @@ cperf_pmd_cyclecount_test_free(struct cperf_pmd_cyclecount_ctx *ctx)
 		return;
 
 	if (ctx->sess) {
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 		if (ctx->options->op_type == CPERF_PDCP ||
 				ctx->options->op_type == CPERF_DOCSIS) {
 			struct rte_security_ctx *sec_ctx =
app/test-crypto-perf/cperf_test_throughput.c +1 -1
index 12d9ea4f9f..f30f7d5c2c 100644
@@ -35,7 +35,7 @@ cperf_throughput_test_free(struct cperf_throughput_ctx *ctx)
 	if (!ctx)
 		return;
 	if (ctx->sess) {
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 		if (ctx->options->op_type == CPERF_PDCP ||
 				ctx->options->op_type == CPERF_DOCSIS) {
 			struct rte_security_ctx *sec_ctx =
app/test-crypto-perf/main.c +3 -3
index 8f8e580e4d..f4f7e31c92 100644
@@ -9,7 +9,7 @@
 #include <rte_random.h>
 #include <rte_eal.h>
 #include <rte_cryptodev.h>
-#ifdef RTE_LIBRTE_PMD_CRYPTO_SCHEDULER
+#ifdef RTE_CRYPTO_SCHEDULER
 #include <rte_cryptodev_scheduler.h>
 #endif
 
@@ -170,7 +170,7 @@ cperf_initialize_cryptodev(struct cperf_options *opts, uint8_t *enabled_cdevs)
 	for (i = 0; i < enabled_cdev_count &&
 			i < RTE_CRYPTO_MAX_DEVS; i++) {
 		cdev_id = enabled_cdevs[i];
-#ifdef RTE_LIBRTE_PMD_CRYPTO_SCHEDULER
+#ifdef RTE_CRYPTO_SCHEDULER
 		/*
 		 * If multi-core scheduler is used, limit the number
 		 * of queue pairs to 1, as there is no way to know
@@ -238,7 +238,7 @@ cperf_initialize_cryptodev(struct cperf_options *opts, uint8_t *enabled_cdevs)
 		 */
 		if (!strcmp((const char *)opts->device_type,
 					"crypto_scheduler")) {
-#ifdef RTE_LIBRTE_PMD_CRYPTO_SCHEDULER
+#ifdef RTE_CRYPTO_SCHEDULER
 			uint32_t nb_slaves =
 				rte_cryptodev_scheduler_slaves_get(cdev_id,
 								NULL);
app/test-crypto-perf/meson.build +1 -1
index e6ddda6f0c..558c648788 100644
@@ -12,6 +12,6 @@ sources = files('cperf_ops.c',
 		'cperf_test_verify.c',
 		'main.c')
 deps += ['cryptodev', 'net', 'security']
-if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER')
+if dpdk_conf.has('RTE_CRYPTO_SCHEDULER')
 	deps += 'crypto_scheduler'
 endif
app/test-pipeline/main.c +1 -1
index 7f0d6d3f18..c7be5942fa 100644
@@ -126,7 +126,7 @@ app_lcore_main_loop(__rte_unused void *arg)
 			return 0;
 
 		case e_APP_PIPELINE_ACL:
-#ifndef RTE_LIBRTE_ACL
+#ifndef RTE_LIB_ACL
 			rte_exit(EXIT_FAILURE, "ACL not present in build\n");
 #else
 			app_main_loop_worker_pipeline_acl();
app/test-pmd/bpf_cmd.h +2 -2
index 5ee4c9f796..66bc706358 100644
@@ -5,12 +5,12 @@
 #ifndef _BPF_CMD_H_
 #define _BPF_CMD_H_
 
-#ifdef RTE_LIBRTE_BPF
+#ifdef RTE_LIB_BPF
 
  /* BPF CLI */
 extern cmdline_parse_inst_t cmd_operate_bpf_ld_parse;
 extern cmdline_parse_inst_t cmd_operate_bpf_unld_parse;
 
-#endif /* RTE_LIBRTE_BPF */
+#endif /* RTE_LIB_BPF */
 
 #endif /* _BPF_CMD_H_ */
app/test-pmd/cmdline.c +95 -95

701 lines not on this page · raw message

app/test-pmd/config.c +9 -9
index 418ea6dda4..ad45b70dc9 100644
@@ -39,13 +39,13 @@
 #include <rte_cycles.h>
 #include <rte_flow.h>
 #include <rte_errno.h>
-#ifdef RTE_LIBRTE_IXGBE_PMD
+#ifdef RTE_NET_IXGBE
 #include <rte_pmd_ixgbe.h>
 #endif
-#ifdef RTE_LIBRTE_I40E_PMD
+#ifdef RTE_NET_I40E
 #include <rte_pmd_i40e.h>
 #endif
-#ifdef RTE_LIBRTE_BNXT_PMD
+#ifdef RTE_NET_BNXT
 #include <rte_pmd_bnxt.h>
 #endif
 #include <rte_gro.h>
@@ -4090,14 +4090,14 @@ get_fdir_info(portid_t port_id, struct rte_eth_fdir_info *fdir_info,
 		return 0;
 	}
 
-#ifdef RTE_LIBRTE_I40E_PMD
+#ifdef RTE_NET_I40E
 	if (ret == -ENOTSUP) {
 		ret = rte_pmd_i40e_get_fdir_info(port_id, fdir_info);
 		if (!ret)
 			ret = rte_pmd_i40e_get_fdir_stats(port_id, fdir_stat);
 	}
 #endif
-#ifdef RTE_LIBRTE_IXGBE_PMD
+#ifdef RTE_NET_IXGBE
 	if (ret == -ENOTSUP) {
 		ret = rte_pmd_ixgbe_get_fdir_info(port_id, fdir_info);
 		if (!ret)
@@ -4250,7 +4250,7 @@ fdir_set_flex_payload(portid_t port_id, struct rte_eth_flex_payload_cfg *cfg)
 void
 set_vf_traffic(portid_t port_id, uint8_t is_rx, uint16_t vf, uint8_t on)
 {
-#ifdef RTE_LIBRTE_IXGBE_PMD
+#ifdef RTE_NET_IXGBE
 	int diag;
 
 	if (is_rx)
@@ -4305,12 +4305,12 @@ set_vf_rate_limit(portid_t port_id, uint16_t vf, uint16_t rate, uint64_t q_msk)
 	RTE_SET_USED(rate);
 	RTE_SET_USED(q_msk);
 
-#ifdef RTE_LIBRTE_IXGBE_PMD
+#ifdef RTE_NET_IXGBE
 	if (diag == -ENOTSUP)
 		diag = rte_pmd_ixgbe_set_vf_rate_limit(port_id, vf, rate,
 						       q_msk);
 #endif
-#ifdef RTE_LIBRTE_BNXT_PMD
+#ifdef RTE_NET_BNXT
 	if (diag == -ENOTSUP)
 		diag = rte_pmd_bnxt_set_vf_rate_limit(port_id, vf, rate, q_msk);
 #endif
@@ -4606,7 +4606,7 @@ close_file(uint8_t *buf)
 void
 port_queue_region_info_display(portid_t port_id, void *buf)
 {
-#ifdef RTE_LIBRTE_I40E_PMD
+#ifdef RTE_NET_I40E
 	uint16_t i, j;
 	struct rte_pmd_i40e_queue_regions *info =
 		(struct rte_pmd_i40e_queue_regions *)buf;
app/test-pmd/meson.build +11 -11
index 2e8b9f8a99..7e9c7bdd69 100644
@@ -25,37 +25,37 @@ sources = files('5tswap.c',
 	'util.c')
 
 deps += ['ethdev', 'gro', 'gso', 'cmdline', 'metrics', 'meter', 'bus_pci']
-if dpdk_conf.has('RTE_LIBRTE_BITRATESTATS')
+if dpdk_conf.has('RTE_LIB_BITRATESTATS')
 	deps += 'bitratestats'
 endif
-if dpdk_conf.has('RTE_LIBRTE_PDUMP')
+if dpdk_conf.has('RTE_LIB_PDUMP')
 	deps += 'pdump'
 endif
-if dpdk_conf.has('RTE_LIBRTE_BITRATESTATS')
+if dpdk_conf.has('RTE_LIB_BITRATESTATS')
 	deps += 'bitratestats'
 endif
-if dpdk_conf.has('RTE_LIBRTE_LATENCYSTATS')
+if dpdk_conf.has('RTE_LIB_LATENCYSTATS')
 	deps += 'latencystats'
 endif
-if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER')
+if dpdk_conf.has('RTE_CRYPTO_SCHEDULER')
 	deps += 'crypto_scheduler'
 endif
-if dpdk_conf.has('RTE_LIBRTE_BOND_PMD')
+if dpdk_conf.has('RTE_NET_BOND')
 	deps += 'net_bond'
 endif
-if dpdk_conf.has('RTE_LIBRTE_BNXT_PMD')
+if dpdk_conf.has('RTE_NET_BNXT')
 	deps += 'net_bnxt'
 endif
-if dpdk_conf.has('RTE_LIBRTE_I40E_PMD')
+if dpdk_conf.has('RTE_NET_I40E')
 	deps += 'net_i40e'
 endif
-if dpdk_conf.has('RTE_LIBRTE_IXGBE_PMD')
+if dpdk_conf.has('RTE_NET_IXGBE')
 	deps += 'net_ixgbe'
 endif
-if dpdk_conf.has('RTE_LIBRTE_DPAA_PMD')
+if dpdk_conf.has('RTE_NET_DPAA')
 	deps += ['bus_dpaa', 'mempool_dpaa', 'net_dpaa']
 endif
-if dpdk_conf.has('RTE_LIBRTE_BPF')
+if dpdk_conf.has('RTE_LIB_BPF')
 	sources += files('bpf_cmd.c')
 	deps += 'bpf'
 endif
app/test-pmd/parameters.c +15 -15
index 1ead59579b..98e6740e62 100644
@@ -39,7 +39,7 @@
 #include <rte_ether.h>
 #include <rte_ethdev.h>
 #include <rte_string_fns.h>
-#ifdef RTE_LIBRTE_PMD_BOND
+#ifdef RTE_NET_BOND
 #include <rte_eth_bond.h>
 #endif
 #include <rte_flow.h>
@@ -50,7 +50,7 @@ static void
 usage(char* progname)
 {
 	printf("usage: %s [EAL options] -- "
-#ifdef RTE_LIBRTE_CMDLINE
+#ifdef RTE_LIB_CMDLINE
 	       "[--interactive|-i] "
 	       "[--cmdline-file=FILENAME] "
 #endif
@@ -60,7 +60,7 @@ usage(char* progname)
 	       "--portlist=PORTLIST "
 	       "--mbuf-size= | --total-num-mbufs= | "
 	       "--nb-cores= | --nb-ports= | "
-#ifdef RTE_LIBRTE_CMDLINE
+#ifdef RTE_LIB_CMDLINE
 	       "--eth-peers-configfile= | "
 	       "--eth-peer=X,M:M:M:M:M:M | "
 	       "--tx-ip=SRC,DST | --tx-udp=PORT | "
@@ -73,7 +73,7 @@ usage(char* progname)
 	       "--vxlan-gpe-port= | --record-core-cycles | "
 	       "--record-burst-stats]\n",
 	       progname);
-#ifdef RTE_LIBRTE_CMDLINE
+#ifdef RTE_LIB_CMDLINE
 	printf("  --interactive: run in interactive mode.\n");
 	printf("  --cmdline-file: execute cli commands before startup.\n");
 #endif
@@ -112,7 +112,7 @@ usage(char* progname)
 	printf("  --max-pkt-len=N: set the maximum size of packet to N bytes.\n");
 	printf("  --max-lro-pkt-size=N: set the maximum LRO aggregated packet "
 	       "size to N bytes.\n");
-#ifdef RTE_LIBRTE_CMDLINE
+#ifdef RTE_LIB_CMDLINE
 	printf("  --eth-peers-configfile=name: config file with ethernet addresses "
 	       "of peer ports.\n");
 	printf("  --eth-peer=X,M:M:M:M:M:M: set the MAC address of the X peer "
@@ -129,7 +129,7 @@ usage(char* progname)
 	       "the packet will be enqueued into the rx drop-queue. "
 	       "If the drop-queue doesn't exist, the packet is dropped. "
 	       "By default drop-queue=127.\n");
-#ifdef RTE_LIBRTE_LATENCY_STATS
+#ifdef RTE_LIB_LATENCYSTATS
 	printf("  --latencystats=N: enable latency and jitter statistcs "
 	       "monitoring on forwarding lcore id N.\n");
 #endif
@@ -223,7 +223,7 @@ usage(char* progname)
 	printf("  --record-burst-stats: enable display of RX and TX bursts.\n");
 }
 
-#ifdef RTE_LIBRTE_CMDLINE
+#ifdef RTE_LIB_CMDLINE
 static int
 init_peer_eth_addrs(char *config_filename)
 {
@@ -586,7 +586,7 @@ launch_args_parse(int argc, char** argv)
 
 	static struct option lgopts[] = {
 		{ "help",			0, 0, 0 },
-#ifdef RTE_LIBRTE_CMDLINE
+#ifdef RTE_LIB_CMDLINE
 		{ "interactive",		0, 0, 0 },
 		{ "cmdline-file",		1, 0, 0 },
 		{ "auto-start",			0, 0, 0 },
@@ -615,10 +615,10 @@ launch_args_parse(int argc, char** argv)
 		{ "pkt-filter-report-hash",     1, 0, 0 },
 		{ "pkt-filter-size",            1, 0, 0 },
 		{ "pkt-filter-drop-queue",      1, 0, 0 },
-#ifdef RTE_LIBRTE_LATENCY_STATS
+#ifdef RTE_LIB_LATENCYSTATS
 		{ "latencystats",               1, 0, 0 },
 #endif
-#ifdef RTE_LIBRTE_BITRATESTATS
+#ifdef RTE_LIB_BITRATESTATS
 		{ "bitrate-stats",              1, 0, 0 },
 #endif
 		{ "disable-crc-strip",          0, 0, 0 },
@@ -691,7 +691,7 @@ launch_args_parse(int argc, char** argv)
 
 	argvopt = argv;
 
-#ifdef RTE_LIBRTE_CMDLINE
+#ifdef RTE_LIB_CMDLINE
 #define SHORTOPTS "i"
 #else
 #define SHORTOPTS ""
@@ -699,7 +699,7 @@ launch_args_parse(int argc, char** argv)
 	while ((opt = getopt_long(argc, argvopt, SHORTOPTS "ah",
 				 lgopts, &opt_idx)) != EOF) {
 		switch (opt) {
-#ifdef RTE_LIBRTE_CMDLINE
+#ifdef RTE_LIB_CMDLINE
 		case 'i':
 			printf("Interactive-mode selected\n");
 			interactive = 1;
@@ -715,7 +715,7 @@ launch_args_parse(int argc, char** argv)
 				usage(argv[0]);
 				rte_exit(EXIT_SUCCESS, "Displayed help\n");
 			}
-#ifdef RTE_LIBRTE_CMDLINE
+#ifdef RTE_LIB_CMDLINE
 			if (!strcmp(lgopts[opt_idx].name, "interactive")) {
 				printf("Interactive-mode selected\n");
 				interactive = 1;
@@ -982,7 +982,7 @@ launch_args_parse(int argc, char** argv)
 						 "drop queue %d invalid - must"
 						 "be >= 0 \n", n);
 			}
-#ifdef RTE_LIBRTE_LATENCY_STATS
+#ifdef RTE_LIB_LATENCYSTATS
 			if (!strcmp(lgopts[opt_idx].name,
 				    "latencystats")) {
 				n = atoi(optarg);
@@ -995,7 +995,7 @@ launch_args_parse(int argc, char** argv)
 						 " must be >= 0\n", n);
 			}
 #endif
-#ifdef RTE_LIBRTE_BITRATESTATS
+#ifdef RTE_LIB_BITRATESTATS
 			if (!strcmp(lgopts[opt_idx].name, "bitrate-stats")) {
 				n = atoi(optarg);
 				if (n >= 0) {
app/test-pmd/testpmd.c +19 -19
index ccba71c076..8efe06c64e 100644
@@ -46,18 +46,18 @@
 #include <rte_ethdev.h>
 #include <rte_dev.h>
 #include <rte_string_fns.h>
-#ifdef RTE_LIBRTE_IXGBE_PMD
+#ifdef RTE_NET_IXGBE
 #include <rte_pmd_ixgbe.h>
 #endif
-#ifdef RTE_LIBRTE_PDUMP
+#ifdef RTE_LIB_PDUMP
 #include <rte_pdump.h>
 #endif
 #include <rte_flow.h>
 #include <rte_metrics.h>
-#ifdef RTE_LIBRTE_BITRATESTATS
+#ifdef RTE_LIB_BITRATESTATS
 #include <rte_bitrate.h>
 #endif
-#ifdef RTE_LIBRTE_LATENCY_STATS
+#ifdef RTE_LIB_LATENCYSTATS
 #include <rte_latencystats.h>
 #endif
 
@@ -404,13 +404,13 @@ int do_mlockall = 0;
  * NIC bypass mode configuration options.
  */
 
-#if defined RTE_LIBRTE_IXGBE_PMD && defined RTE_LIBRTE_IXGBE_BYPASS
+#if defined RTE_NET_IXGBE && defined RTE_LIBRTE_IXGBE_BYPASS
 /* The NIC bypass watchdog timeout. */
 uint32_t bypass_timeout = RTE_PMD_IXGBE_BYPASS_TMT_OFF;
 #endif
 
 
-#ifdef RTE_LIBRTE_LATENCY_STATS
+#ifdef RTE_LIB_LATENCYSTATS
 
 /*
  * Set when latency stats is enabled in the commandline
@@ -488,7 +488,7 @@ uint8_t record_burst_stats;
 unsigned int num_sockets = 0;
 unsigned int socket_ids[RTE_MAX_NUMA_NODES];
 
-#ifdef RTE_LIBRTE_BITRATESTATS
+#ifdef RTE_LIB_BITRATESTATS
 /* Bitrate statistics */
 struct rte_stats_bitrates *bitrate_data;
 lcoreid_t bitrate_lcore_id;
@@ -2064,7 +2064,7 @@ run_pkt_fwd_on_lcore(struct fwd_lcore *fc, packet_fwd_t pkt_fwd)
 	struct fwd_stream **fsm;
 	streamid_t nb_fs;
 	streamid_t sm_id;
-#ifdef RTE_LIBRTE_BITRATESTATS
+#ifdef RTE_LIB_BITRATESTATS
 	uint64_t tics_per_1sec;
 	uint64_t tics_datum;
 	uint64_t tics_current;
@@ -2079,7 +2079,7 @@ run_pkt_fwd_on_lcore(struct fwd_lcore *fc, packet_fwd_t pkt_fwd)
 	do {
 		for (sm_id = 0; sm_id < nb_fs; sm_id++)
 			(*pkt_fwd)(fsm[sm_id]);
-#ifdef RTE_LIBRTE_BITRATESTATS
+#ifdef RTE_LIB_BITRATESTATS
 		if (bitrate_enabled != 0 &&
 				bitrate_lcore_id == rte_lcore_id()) {
 			tics_current = rte_rdtsc();
@@ -2092,7 +2092,7 @@ run_pkt_fwd_on_lcore(struct fwd_lcore *fc, packet_fwd_t pkt_fwd)
 			}
 		}
 #endif
-#ifdef RTE_LIBRTE_LATENCY_STATS
+#ifdef RTE_LIB_LATENCYSTATS
 		if (latencystats_enabled != 0 &&
 				latencystats_lcore_id == rte_lcore_id())
 			rte_latencystats_update();
@@ -3347,7 +3347,7 @@ init_port_config(void)
 			return;
 
 		map_port_queue_stats_mapping_registers(pid, port);
-#if defined RTE_LIBRTE_IXGBE_PMD && defined RTE_LIBRTE_IXGBE_BYPASS
+#if defined RTE_NET_IXGBE && defined RTE_LIBRTE_IXGBE_BYPASS
 		rte_pmd_ixgbe_bypass_init(pid);
 #endif
 
@@ -3613,11 +3613,11 @@ signal_handler(int signum)
 	if (signum == SIGINT || signum == SIGTERM) {
 		printf("\nSignal %d received, preparing to exit...\n",
 				signum);
-#ifdef RTE_LIBRTE_PDUMP
+#ifdef RTE_LIB_PDUMP
 		/* uninitialize packet capture framework */
 		rte_pdump_uninit();
 #endif
-#ifdef RTE_LIBRTE_LATENCY_STATS
+#ifdef RTE_LIB_LATENCYSTATS
 		if (latencystats_enabled != 0)
 			rte_latencystats_uninit();
 #endif
@@ -3659,7 +3659,7 @@ main(int argc, char** argv)
 	if (ret != 0)
 		rte_exit(EXIT_FAILURE, "Cannot register for ethdev events");
 
-#ifdef RTE_LIBRTE_PDUMP
+#ifdef RTE_LIB_PDUMP
 	/* initialize packet capture framework */
 	rte_pdump_init();
 #endif
@@ -3682,10 +3682,10 @@ main(int argc, char** argv)
 			 "Check the core mask argument\n");
 
 	/* Bitrate/latency stats disabled by default */
-#ifdef RTE_LIBRTE_BITRATESTATS
+#ifdef RTE_LIB_BITRATESTATS
 	bitrate_enabled = 0;
 #endif
-#ifdef RTE_LIBRTE_LATENCY_STATS
+#ifdef RTE_LIB_LATENCYSTATS
 	latencystats_enabled = 0;
 #endif
 
@@ -3764,7 +3764,7 @@ main(int argc, char** argv)
 	/* Init metrics library */
 	rte_metrics_init(rte_socket_id());
 
-#ifdef RTE_LIBRTE_LATENCY_STATS
+#ifdef RTE_LIB_LATENCYSTATS
 	if (latencystats_enabled != 0) {
 		int ret = rte_latencystats_init(1, NULL);
 		if (ret)
@@ -3776,7 +3776,7 @@ main(int argc, char** argv)
 #endif
 
 	/* Setup bitrate stats */
-#ifdef RTE_LIBRTE_BITRATESTATS
+#ifdef RTE_LIB_BITRATESTATS
 	if (bitrate_enabled != 0) {
 		bitrate_data = rte_stats_bitrate_create();
 		if (bitrate_data == NULL)
@@ -3786,7 +3786,7 @@ main(int argc, char** argv)
 	}
 #endif
 
-#ifdef RTE_LIBRTE_CMDLINE
+#ifdef RTE_LIB_CMDLINE
 	if (strlen(cmdline_filename) != 0)
 		cmdline_read_from_file(cmdline_filename);
 
app/test-pmd/testpmd.h +2 -2
index c7e7e41a97..660847c948 100644
@@ -398,12 +398,12 @@ extern uint32_t param_total_num_mbufs;
 
 extern uint16_t stats_period;
 
-#ifdef RTE_LIBRTE_LATENCY_STATS
+#ifdef RTE_LIB_LATENCYSTATS
 extern uint8_t latencystats_enabled;
 extern lcoreid_t latencystats_lcore_id;
 #endif
 
-#ifdef RTE_LIBRTE_BITRATESTATS
+#ifdef RTE_LIB_BITRATESTATS
 extern lcoreid_t bitrate_lcore_id;
 extern uint8_t bitrate_enabled;
 #endif
app/test/meson.build +13 -13
index d3ae9c91ac..5ea7265d47 100644
@@ -337,35 +337,35 @@ dump_test_names = [
 # unit tests without requiring that the developer install the
 # DPDK libraries.  Explicit linkage of drivers (plugin libraries)
 # in applications should not be used.
-if dpdk_conf.has('RTE_LIBRTE_RING_MEMPOOL')
+if dpdk_conf.has('RTE_MEMPOOL_RING')
 	test_deps += 'mempool_ring'
 endif
-if dpdk_conf.has('RTE_LIBRTE_STACK_MEMPOOL')
+if dpdk_conf.has('RTE_MEMPOOL_STACK')
 	test_deps += 'mempool_stack'
 endif
-if dpdk_conf.has('RTE_LIBRTE_SKELETON_EVENTDEV_PMD')
+if dpdk_conf.has('RTE_EVENT_SKELETON')
 	test_deps += 'event_skeleton'
 endif
-if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER')
+if dpdk_conf.has('RTE_CRYPTO_SCHEDULER')
 	test_deps += 'crypto_scheduler'
 endif
-if dpdk_conf.has('RTE_LIBRTE_TELEMETRY')
+if dpdk_conf.has('RTE_LIB_TELEMETRY')
 	test_sources += 'test_telemetry_json.c'
 	fast_tests += [['telemetry_json_autotest', true]]
 endif
 
 # The following linkages of drivers are required because
 # they are used via a driver-specific API.
-if dpdk_conf.has('RTE_LIBRTE_BOND_PMD')
+if dpdk_conf.has('RTE_NET_BOND')
 	test_deps += 'net_bond'
 	test_sources += ['test_link_bonding.c', 'test_link_bonding_rssconf.c']
 	driver_test_names += ['link_bonding_autotest', 'link_bonding_rssconf_autotest']
-	if dpdk_conf.has('RTE_LIBRTE_RING_PMD')
+	if dpdk_conf.has('RTE_NET_RING')
 		test_sources += 'test_link_bonding_mode4.c'
 		driver_test_names += 'link_bonding_mode4_autotest'
 	endif
 endif
-if dpdk_conf.has('RTE_LIBRTE_RING_PMD')
+if dpdk_conf.has('RTE_NET_RING')
 	test_deps += 'net_ring'
 	test_sources += 'test_pmd_ring_perf.c'
 	test_sources += 'test_pmd_ring.c'
@@ -382,13 +382,13 @@ if dpdk_conf.has('RTE_LIBRTE_RING_PMD')
 	fast_tests += [['pdump_autotest', true]]
 endif
 
-if dpdk_conf.has('RTE_LIBRTE_POWER')
+if dpdk_conf.has('RTE_LIB_POWER')
 	test_deps += 'power'
 endif
-if dpdk_conf.has('RTE_LIBRTE_KNI')
+if dpdk_conf.has('RTE_LIB_KNI')
 	test_deps += 'kni'
 endif
-if dpdk_conf.has('RTE_LIBRTE_PDUMP')
+if dpdk_conf.has('RTE_LIB_PDUMP')
 	test_deps += 'pdump'
 endif
 
@@ -405,7 +405,7 @@ cflags += '-fno-strict-aliasing'
 cflags += ['-DALLOW_INTERNAL_API']
 
 test_dep_objs = []
-if dpdk_conf.has('RTE_LIBRTE_COMPRESSDEV')
+if dpdk_conf.has('RTE_LIB_COMPRESSDEV')
 	compress_test_dep = dependency('zlib', required: false)
 	if compress_test_dep.found()
 		test_dep_objs += compress_test_dep
@@ -415,7 +415,7 @@ if dpdk_conf.has('RTE_LIBRTE_COMPRESSDEV')
 	endif
 endif
 
-if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER')
+if dpdk_conf.has('RTE_CRYPTO_SCHEDULER')
 	driver_test_names += 'cryptodev_scheduler_autotest'
 endif
 
app/test/process.h +8 -8
index c3b3780337..27f1b1c0e6 100644
@@ -24,8 +24,8 @@
 #define exe "exe"
 #endif
 
-#ifdef RTE_LIBRTE_PDUMP
-#ifdef RTE_LIBRTE_RING_PMD
+#ifdef RTE_LIB_PDUMP
+#ifdef RTE_NET_RING
 #include <pthread.h>
 extern void *send_pkts(void *empty);
 extern uint16_t flag_for_send_pkts;
@@ -45,8 +45,8 @@ process_dup(const char *const argv[], int numargs, const char *env_value)
 	char *argv_cpy[numargs + 1];
 	int i, status;
 	char path[32];
-#ifdef RTE_LIBRTE_PDUMP
-#ifdef RTE_LIBRTE_RING_PMD
+#ifdef RTE_LIB_PDUMP
+#ifdef RTE_NET_RING
 	pthread_t thread;
 #endif
 #endif
@@ -124,8 +124,8 @@ process_dup(const char *const argv[], int numargs, const char *env_value)
 		}
 	}
 	/* parent process does a wait */
-#ifdef RTE_LIBRTE_PDUMP
-#ifdef RTE_LIBRTE_RING_PMD
+#ifdef RTE_LIB_PDUMP
+#ifdef RTE_NET_RING
 	if ((strcmp(env_value, "run_pdump_server_tests") == 0))
 		pthread_create(&thread, NULL, &send_pkts, NULL);
 #endif
@@ -133,8 +133,8 @@ process_dup(const char *const argv[], int numargs, const char *env_value)
 
 	while (wait(&status) != pid)
 		;
-#ifdef RTE_LIBRTE_PDUMP
-#ifdef RTE_LIBRTE_RING_PMD
+#ifdef RTE_LIB_PDUMP
+#ifdef RTE_NET_RING
 	if ((strcmp(env_value, "run_pdump_server_tests") == 0)) {
 		flag_for_send_pkts = 0;
 		pthread_join(thread, NULL);
app/test/test.c +10 -10
index 94d26ab1f6..afabfe42fc 100644
@@ -12,7 +12,7 @@
 #include <ctype.h>
 #include <sys/queue.h>
 
-#ifdef RTE_LIBRTE_CMDLINE
+#ifdef RTE_LIB_CMDLINE
 #include <cmdline_rdline.h>
 #include <cmdline_parse.h>
 #include <cmdline_socket.h>
@@ -25,12 +25,12 @@ extern cmdline_parse_ctx_t main_ctx[];
 #include <rte_cycles.h>
 #include <rte_log.h>
 #include <rte_string_fns.h>
-#ifdef RTE_LIBRTE_TIMER
+#ifdef RTE_LIB_TIMER
 #include <rte_timer.h>
 #endif
 
 #include "test.h"
-#ifdef RTE_LIBRTE_PDUMP
+#ifdef RTE_LIB_PDUMP
 #include "test_pdump.h"
 #endif
 
@@ -52,8 +52,8 @@ do_recursive_call(void)
 		int (*action_fn)(void);
 	} actions[] =  {
 			{ "run_secondary_instances", test_mp_secondary },
-#ifdef RTE_LIBRTE_PDUMP
-#ifdef RTE_LIBRTE_RING_PMD
+#ifdef RTE_LIB_PDUMP
+#ifdef RTE_NET_RING
 			{ "run_pdump_server_tests", test_pdump },
 #endif
 #endif
@@ -69,7 +69,7 @@ do_recursive_call(void)
 			{ "test_memory_flags", no_action },
 			{ "test_file_prefix", no_action },
 			{ "test_no_huge_flag", no_action },
-#ifdef RTE_LIBRTE_TIMER
+#ifdef RTE_LIB_TIMER
 			{ "timer_secondary_spawn_wait", test_timer_secondary },
 #endif
 	};
@@ -91,7 +91,7 @@ int last_test_result;
 int
 main(int argc, char **argv)
 {
-#ifdef RTE_LIBRTE_CMDLINE
+#ifdef RTE_LIB_CMDLINE
 	struct cmdline *cl;
 #endif
 	char *extra_args;
@@ -134,7 +134,7 @@ main(int argc, char **argv)
 		goto out;
 	}
 
-#ifdef RTE_LIBRTE_TIMER
+#ifdef RTE_LIB_TIMER
 	if (rte_timer_subsystem_init() < 0) {
 		ret = -1;
 		goto out;
@@ -163,7 +163,7 @@ main(int argc, char **argv)
 				"HPET is not enabled, using TSC as default timer\n");
 
 
-#ifdef RTE_LIBRTE_CMDLINE
+#ifdef RTE_LIB_CMDLINE
 	cl = cmdline_stdin_new(main_ctx, "RTE>>");
 	if (cl == NULL) {
 		ret = -1;
@@ -191,7 +191,7 @@ main(int argc, char **argv)
 	ret = 0;
 
 out:
-#ifdef RTE_LIBRTE_TIMER
+#ifdef RTE_LIB_TIMER
 	rte_timer_subsystem_finalize();
 #endif
 	rte_eal_cleanup();
app/test/test_cryptodev.c +13 -13
index 153d001194..687a8830a7 100644
@@ -18,7 +18,7 @@
 #include <rte_cryptodev_pmd.h>
 #include <rte_string_fns.h>
 
-#ifdef RTE_LIBRTE_PMD_CRYPTO_SCHEDULER
+#ifdef RTE_CRYPTO_SCHEDULER
 #include <rte_cryptodev_scheduler.h>
 #include <rte_cryptodev_scheduler_operations.h>
 #endif
@@ -40,7 +40,7 @@
 #include "test_cryptodev_aead_test_vectors.h"
 #include "test_cryptodev_hmac_test_vectors.h"
 #include "test_cryptodev_mixed_test_vectors.h"
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 #include "test_cryptodev_security_pdcp_test_vectors.h"
 #include "test_cryptodev_security_pdcp_test_func.h"
 #include "test_cryptodev_security_docsis_test_vectors.h"
@@ -74,17 +74,17 @@ struct crypto_unittest_params {
 	struct rte_crypto_sym_xform cipher_xform;
 	struct rte_crypto_sym_xform auth_xform;
 	struct rte_crypto_sym_xform aead_xform;
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 	struct rte_security_docsis_xform docsis_xform;
 #endif
 
 	union {
 		struct rte_cryptodev_sym_session *sess;
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 		struct rte_security_session *sec_session;
 #endif
 	};
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 	enum rte_security_session_action_type type;
 #endif
 	struct rte_crypto_op *op;
@@ -475,7 +475,7 @@ testsuite_setup(void)
 		}
 	}
 
-#ifdef RTE_LIBRTE_PMD_CRYPTO_SCHEDULER
+#ifdef RTE_CRYPTO_SCHEDULER
 	char vdev_args[VDEV_ARGS_SIZE] = {""};
 	char temp_str[VDEV_ARGS_SIZE] = {"mode=multi-core,"
 		"ordering=enable,name=cryptodev_test_scheduler,corelist="};
@@ -522,7 +522,7 @@ testsuite_setup(void)
 				i, RTE_STR(CRYPTODEV_NAME_SCHEDULER_PMD));
 		}
 	}
-#endif /* RTE_LIBRTE_PMD_CRYPTO_SCHEDULER */
+#endif /* RTE_CRYPTO_SCHEDULER */
 
 	nb_devs = rte_cryptodev_count();
 	if (nb_devs < 1) {
@@ -695,7 +695,7 @@ ut_teardown(void)
 	struct rte_cryptodev_stats stats;
 
 	/* free crypto session structure */
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 	if (ut_params->type == RTE_SECURITY_ACTION_TYPE_LOOKASIDE_PROTOCOL) {
 		if (ut_params->sec_session) {
 			rte_security_session_destroy(rte_cryptodev_get_sec_ctx
@@ -7085,7 +7085,7 @@ test_authenticated_encryption(const struct aead_test_data *tdata)
 
 }
 
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 static int
 security_proto_supported(enum rte_security_session_action_type action,
 	enum rte_security_session_protocol proto)
@@ -11710,7 +11710,7 @@ test_chacha20_poly1305_decrypt_test_case_rfc8439(void)
 	return test_authenticated_decryption(&chacha20_poly1305_case_rfc8439);
 }
 
-#ifdef RTE_LIBRTE_PMD_CRYPTO_SCHEDULER
+#ifdef RTE_CRYPTO_SCHEDULER
 
 /* global AESNI slave IDs for the scheduler test */
 uint8_t aesni_ids[2];
@@ -11930,7 +11930,7 @@ static struct unit_test_suite cryptodev_scheduler_testsuite  = {
 	}
 };
 
-#endif /* RTE_LIBRTE_PMD_CRYPTO_SCHEDULER */
+#endif /* RTE_CRYPTO_SCHEDULER */
 
 static struct unit_test_suite cryptodev_testsuite  = {
 	.suite_name = "Crypto Unit Test Suite",
@@ -12551,7 +12551,7 @@ static struct unit_test_suite cryptodev_testsuite  = {
 		TEST_CASE_ST(ut_setup, ut_teardown,
 			test_verify_auth_aes_cmac_cipher_null_test_case_1),
 
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 		TEST_CASE_ST(ut_setup_security, ut_teardown,
 			test_PDCP_PROTO_all),
 		TEST_CASE_ST(ut_setup_security, ut_teardown,
@@ -12877,7 +12877,7 @@ test_cryptodev_mrvl(void)
 	return unit_test_suite_runner(&cryptodev_mrvl_testsuite);
 }
 
-#ifdef RTE_LIBRTE_PMD_CRYPTO_SCHEDULER
+#ifdef RTE_CRYPTO_SCHEDULER
 
 static int
 test_cryptodev_scheduler(void /*argv __rte_unused, int argc __rte_unused*/)
app/test/test_cryptodev_hash_test_vectors.h +1 -1
index d11d7cee7e..e261dfe36c 100644
@@ -5,7 +5,7 @@
 #ifndef TEST_CRYPTODEV_HASH_TEST_VECTORS_H_
 #define TEST_CRYPTODEV_HASH_TEST_VECTORS_H_
 
-#ifdef RTE_LIBRTE_PMD_AESNI_MB
+#ifdef RTE_CRYPTO_AESNI_MB
 #include <intel-ipsec-mb.h>
 #endif
 
app/test/test_eal_flags.c +2 -2
index b019656b29..fc7d1a2f02 100644
@@ -344,7 +344,7 @@ test_invalid_b_flag(void)
 static int
 test_invalid_vdev_flag(void)
 {
-#ifdef RTE_LIBRTE_PMD_RING
+#ifdef RTE_NET_RING
 #ifdef RTE_EXEC_ENV_FREEBSD
 	/* BSD target doesn't support prefixes at this point, and we also need to
 	 * run another primary process here */
@@ -1504,7 +1504,7 @@ test_eal_flags(void)
 		return ret;
 	}
 
-#ifdef RTE_LIBRTE_PMD_RING
+#ifdef RTE_NET_RING
 	ret = test_invalid_vdev_flag();
 	if (ret < 0) {
 		printf("Error in test_invalid_vdev_flag()\n");
app/test/test_func_reentrancy.c +12 -12
index f5ddd03d76..2a0c134a99 100644
@@ -27,15 +27,15 @@
 #include <rte_spinlock.h>
 #include <rte_malloc.h>
 
-#ifdef RTE_LIBRTE_HASH
+#ifdef RTE_LIB_HASH
 #include <rte_hash.h>
 #include <rte_fbk_hash.h>
 #include <rte_jhash.h>
-#endif /* RTE_LIBRTE_HASH */
+#endif /* RTE_LIB_HASH */
 
-#ifdef RTE_LIBRTE_LPM
+#ifdef RTE_LIB_LPM
 #include <rte_lpm.h>
-#endif /* RTE_LIBRTE_LPM */
+#endif /* RTE_LIB_LPM */
 
 #include <rte_string_fns.h>
 
@@ -200,7 +200,7 @@ mempool_create_lookup(__rte_unused void *arg)
 	return 0;
 }
 
-#ifdef RTE_LIBRTE_HASH
+#ifdef RTE_LIB_HASH
 static void
 hash_clean(unsigned lcore_id)
 {
@@ -328,9 +328,9 @@ fbk_create_free(__rte_unused void *arg)
 
 	return 0;
 }
-#endif /* RTE_LIBRTE_HASH */
+#endif /* RTE_LIB_HASH */
 
-#ifdef RTE_LIBRTE_LPM
+#ifdef RTE_LIB_LPM
 static void
 lpm_clean(unsigned int lcore_id)
 {
@@ -388,7 +388,7 @@ lpm_create_free(__rte_unused void *arg)
 
 	return 0;
 }
-#endif /* RTE_LIBRTE_LPM */
+#endif /* RTE_LIB_LPM */
 
 struct test_case{
 	case_func_t    func;
@@ -403,13 +403,13 @@ struct test_case test_cases[] = {
 	{ ring_create_lookup,     NULL,  ring_clean,   "ring create/lookup" },
 	{ mempool_create_lookup,  NULL,  mempool_clean,
 			"mempool create/lookup" },
-#ifdef RTE_LIBRTE_HASH
+#ifdef RTE_LIB_HASH
 	{ hash_create_free,       NULL,  hash_clean,   "hash create/free" },
 	{ fbk_create_free,        NULL,  fbk_clean,    "fbk create/free" },
-#endif /* RTE_LIBRTE_HASH */
-#ifdef RTE_LIBRTE_LPM
+#endif /* RTE_LIB_HASH */
+#ifdef RTE_LIB_LPM
 	{ lpm_create_free,        NULL,  lpm_clean,    "lpm create/free" },
-#endif /* RTE_LIBRTE_LPM */
+#endif /* RTE_LIB_LPM */
 };
 
 /**
app/test/test_kni.c +1 -1
index e47ab36e02..402f170649 100644
@@ -11,7 +11,7 @@
 
 #include "test.h"
 
-#if !defined(RTE_EXEC_ENV_LINUX) || !defined(RTE_LIBRTE_KNI)
+#if !defined(RTE_EXEC_ENV_LINUX) || !defined(RTE_LIB_KNI)
 
 static int
 test_kni(void)
app/test/test_mp_secondary.c +6 -6
index 3a655c3400..e1a7b4ae45 100644
@@ -34,14 +34,14 @@
 #include <rte_log.h>
 #include <rte_mempool.h>
 
-#ifdef RTE_LIBRTE_HASH
+#ifdef RTE_LIB_HASH
 #include <rte_hash.h>
 #include <rte_fbk_hash.h>
-#endif /* RTE_LIBRTE_HASH */
+#endif /* RTE_LIB_HASH */
 
-#ifdef RTE_LIBRTE_LPM
+#ifdef RTE_LIB_LPM
 #include <rte_lpm.h>
-#endif /* RTE_LIBRTE_LPM */
+#endif /* RTE_LIB_LPM */
 
 #include <rte_string_fns.h>
 
@@ -157,7 +157,7 @@ run_object_creation_tests(void)
 	}
 	printf("# Checked rte_mempool_create() OK\n");
 
-#ifdef RTE_LIBRTE_HASH
+#ifdef RTE_LIB_HASH
 	const struct rte_hash_parameters hash_params = { .name = "test_mp_hash" };
 	rte_errno=0;
 	if ((rte_hash_create(&hash_params) != NULL) &&
@@ -177,7 +177,7 @@ run_object_creation_tests(void)
 	printf("# Checked rte_fbk_hash_create() OK\n");
 #endif
 
-#ifdef RTE_LIBRTE_LPM
+#ifdef RTE_LIB_LPM
 	rte_errno=0;
 	struct rte_lpm_config config;
 
app/test/test_power.c +1 -1
index 0c597c33f1..da1d67c0ab 100644
@@ -11,7 +11,7 @@
 
 #include "test.h"
 
-#ifndef RTE_LIBRTE_POWER
+#ifndef RTE_LIB_POWER
 
 static int
 test_power(void)
app/test/test_power_cpufreq.c +1 -1
index d203810da9..731c6b4dc8 100644
@@ -11,7 +11,7 @@
 
 #include "test.h"
 
-#ifndef RTE_LIBRTE_POWER
+#ifndef RTE_LIB_POWER
 
 static int
 test_power_cpufreq(void)
app/test/test_power_kvm_vm.c +1 -1
index 785cd048df..cc66b7a8a0 100644
@@ -10,7 +10,7 @@
 
 #include "test.h"
 
-#ifndef RTE_LIBRTE_POWER
+#ifndef RTE_LIB_POWER
 
 static int
 test_power_kvm_vm(void)
app/test/test_table.c +1 -1
index bc8d8a2e10..95034148cb 100644
@@ -180,7 +180,7 @@ test_table(void)
 		}
 	}
 
-#ifdef RTE_LIBRTE_ACL
+#ifdef RTE_LIB_ACL
 	printf("\n\n\n\n************ACL tests************\n");
 	if (test_table_acl() < 0) {
 		ret = TEST_FAILED;
app/test/test_table.h +1 -1
index 43b8855874..209bdbff2c 100644
@@ -10,7 +10,7 @@
 #include <rte_table_array.h>
 #include <rte_pipeline.h>
 
-#ifdef RTE_LIBRTE_ACL
+#ifdef RTE_LIB_ACL
 #include <rte_table_acl.h>
 #endif
 
app/test/test_table_combined.h +1 -1
index d05866240f..fb94dbb94d 100644
@@ -6,7 +6,7 @@
 int test_table_stub_combined(void);
 int test_table_lpm_combined(void);
 int test_table_lpm_ipv6_combined(void);
-#ifdef RTE_LIBRTE_ACL
+#ifdef RTE_LIB_ACL
 int test_table_acl(void);
 #endif
 int test_table_hash8unoptimized(void);
app/test/test_table_tables.h +1 -1
index 7570e99639..530633a013 100644
@@ -7,7 +7,7 @@ int test_table_hash_cuckoo(void);
 int test_table_lpm(void);
 int test_table_lpm_ipv6(void);
 int test_table_array(void);
-#ifdef RTE_LIBRTE_ACL
+#ifdef RTE_LIB_ACL
 int test_table_acl(void);
 #endif
 int test_table_hash_unoptimized(void);
config/arm/meson.build +3 -3
index 42c0c34a57..a7c5e4dd00 100644
@@ -21,9 +21,9 @@ flags_common_default = [
 	#	['RTE_ARM64_MEMCPY_ALIGN_MASK', 0xF],
 	#	['RTE_ARM64_MEMCPY_STRICT_ALIGN', false],
 
-	['RTE_LIBRTE_FM10K_PMD', false],
-	['RTE_LIBRTE_SFC_EFX_PMD', false],
-	['RTE_LIBRTE_AVP_PMD', false],
+	['RTE_NET_FM10K', false],
+	['RTE_NET_SFC_EFX', false],
+	['RTE_NET_AVP', false],
 
 	['RTE_SCHED_VECTOR', false],
 	['RTE_ARM_USE_WFE', false],
drivers/bus/fslmc/portal/dpaa2_hw_dpio.c +3 -3
index 97be761164..08836090d2 100644
@@ -120,7 +120,7 @@ dpaa2_core_cluster_sdest(int cpu_id)
 	return dpaa2_core_cluster_base + x;
 }
 
-#ifdef RTE_LIBRTE_PMD_DPAA2_EVENTDEV
+#ifdef RTE_EVENT_DPAA2
 static void
 dpaa2_affine_dpio_intr_to_respective_core(int32_t dpio_id, int cpu_id)
 {
@@ -242,7 +242,7 @@ dpaa2_configure_stashing(struct dpaa2_dpio_dev *dpio_dev, int cpu_id)
 		return -1;
 	}
 
-#ifdef RTE_LIBRTE_PMD_DPAA2_EVENTDEV
+#ifdef RTE_EVENT_DPAA2
 	if (dpaa2_dpio_intr_init(dpio_dev, cpu_id)) {
 		DPAA2_BUS_ERR("Interrupt registration failed for dpio");
 		return -1;
@@ -255,7 +255,7 @@ dpaa2_configure_stashing(struct dpaa2_dpio_dev *dpio_dev, int cpu_id)
 static void dpaa2_put_qbman_swp(struct dpaa2_dpio_dev *dpio_dev)
 {
 	if (dpio_dev) {
-#ifdef RTE_LIBRTE_PMD_DPAA2_EVENTDEV
+#ifdef RTE_EVENT_DPAA2
 		dpaa2_dpio_intr_deinit(dpio_dev);
 #endif
 		rte_atomic16_clear(&dpio_dev->ref_count);
drivers/compress/qat/qat_comp.h +1 -1
index 1c07f2233e..0444b50a1e 100644
@@ -5,7 +5,7 @@
 #ifndef _QAT_COMP_H_
 #define _QAT_COMP_H_
 
-#ifdef RTE_LIBRTE_COMPRESSDEV
+#ifdef RTE_LIB_COMPRESSDEV
 
 #include <rte_compressdev.h>
 #include <rte_compressdev_pmd.h>
drivers/compress/qat/qat_comp_pmd.h +1 -1
index ed27120604..252b4b24e3 100644
@@ -5,7 +5,7 @@
 #ifndef _QAT_COMP_PMD_H_
 #define _QAT_COMP_PMD_H_
 
-#ifdef RTE_LIBRTE_COMPRESSDEV
+#ifdef RTE_LIB_COMPRESSDEV
 
 #include <rte_compressdev.h>
 #include <rte_compressdev_pmd.h>
drivers/crypto/aesni_mb/aesni_mb_pmd_private.h +1 -1
index e0c7b4f7cc..8e9b8bca29 100644
@@ -7,7 +7,7 @@
 
 #include <intel-ipsec-mb.h>
 
-#if defined(RTE_LIBRTE_SECURITY) && (IMB_VERSION_NUM) >= IMB_VERSION(0, 54, 0)
+#if defined(RTE_LIB_SECURITY) && (IMB_VERSION_NUM) >= IMB_VERSION(0, 54, 0)
 #define AESNI_MB_DOCSIS_SEC_ENABLED 1
 #include <rte_security.h>
 #include <rte_security_driver.h>
drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c +11 -11
index 109e61ae16..41401c6f08 100644
@@ -58,7 +58,7 @@
 
 static uint8_t cryptodev_driver_id;
 
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 static inline int
 build_proto_compound_sg_fd(dpaa2_sec_session *sess,
 			   struct rte_crypto_op *op,
@@ -1355,7 +1355,7 @@ build_sec_fd(struct rte_crypto_op *op,
 	if (op->sess_type == RTE_CRYPTO_OP_WITH_SESSION)
 		sess = (dpaa2_sec_session *)get_sym_session_private_data(
 				op->sym->session, cryptodev_driver_id);
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 	else if (op->sess_type == RTE_CRYPTO_OP_SECURITY_SESSION)
 		sess = (dpaa2_sec_session *)get_sec_session_private_data(
 				op->sym->sec_session);
@@ -1383,7 +1383,7 @@ build_sec_fd(struct rte_crypto_op *op,
 		case DPAA2_SEC_CIPHER_HASH:
 			ret = build_authenc_sg_fd(sess, op, fd, bpid);
 			break;
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 		case DPAA2_SEC_IPSEC:
 		case DPAA2_SEC_PDCP:
 			ret = build_proto_compound_sg_fd(sess, op, fd, bpid);
@@ -1407,7 +1407,7 @@ build_sec_fd(struct rte_crypto_op *op,
 		case DPAA2_SEC_CIPHER_HASH:
 			ret = build_authenc_fd(sess, op, fd, bpid);
 			break;
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 		case DPAA2_SEC_IPSEC:
 			ret = build_proto_fd(sess, op, fd, bpid);
 			break;
@@ -1522,7 +1522,7 @@ dpaa2_sec_enqueue_burst(void *qp, struct rte_crypto_op **ops,
 	return num_tx;
 }
 
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 static inline struct rte_crypto_op *
 sec_simple_fd_to_mbuf(const struct qbman_fd *fd)
 {
@@ -1561,7 +1561,7 @@ sec_fd_to_mbuf(const struct qbman_fd *fd)
 	struct ctxt_priv *priv;
 	struct rte_mbuf *dst, *src;
 
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 	if (DPAA2_FD_GET_FORMAT(fd) == qbman_fd_single)
 		return sec_simple_fd_to_mbuf(fd);
 #endif
@@ -1594,7 +1594,7 @@ sec_fd_to_mbuf(const struct qbman_fd *fd)
 	} else
 		dst = src;
 
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 	if (op->sess_type == RTE_CRYPTO_OP_SECURITY_SESSION) {
 		uint16_t len = DPAA2_GET_FD_LEN(fd);
 		dst->pkt_len = len;
@@ -2539,7 +2539,7 @@ dpaa2_sec_set_session_parameters(struct rte_cryptodev *dev,
 	return ret;
 }
 
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 static int
 dpaa2_sec_ipsec_aead_init(struct rte_crypto_aead_xform *aead_xform,
 			dpaa2_sec_session *session,
@@ -3698,7 +3698,7 @@ static struct rte_cryptodev_ops crypto_ops = {
 	.sym_session_clear        = dpaa2_sec_sym_session_clear,
 };
 
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 static const struct rte_security_capability *
 dpaa2_sec_capabilities_get(void *device __rte_unused)
 {
@@ -3736,7 +3736,7 @@ dpaa2_sec_dev_init(struct rte_cryptodev *cryptodev)
 	struct dpaa2_sec_dev_private *internals;
 	struct rte_device *dev = cryptodev->device;
 	struct rte_dpaa2_device *dpaa2_dev;
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 	struct rte_security_ctx *security_instance;
 #endif
 	struct fsl_mc_io *dpseci;
@@ -3775,7 +3775,7 @@ dpaa2_sec_dev_init(struct rte_cryptodev *cryptodev)
 		DPAA2_SEC_DEBUG("Device already init by primary process");
 		return 0;
 	}
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 	/* Initialize security_ctx only for primary process*/
 	security_instance = rte_malloc("rte_security_instances_ops",
 				sizeof(struct rte_security_ctx), 0);
drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h +4 -4
index 528b64ef88..5d9cf12c4a 100644
@@ -8,7 +8,7 @@
 #ifndef _DPAA2_SEC_PMD_PRIVATE_H_
 #define _DPAA2_SEC_PMD_PRIVATE_H_
 
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 #include <rte_security_driver.h>
 #endif
 
@@ -141,7 +141,7 @@ struct dpaa2_sec_aead_ctxt {
 	uint8_t auth_cipher_text;       /**< Authenticate/cipher ordering */
 };
 
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 /*
  * The structure is to be filled by user for PDCP Protocol
  */
@@ -193,7 +193,7 @@ typedef struct dpaa2_sec_session_entry {
 				struct dpaa2_sec_aead_ctxt aead_ctxt;
 			} ext_params;
 		};
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 		struct dpaa2_pdcp_ctxt pdcp;
 #endif
 	};
@@ -550,7 +550,7 @@ static const struct rte_cryptodev_capabilities dpaa2_sec_capabilities[] = {
 	RTE_CRYPTODEV_END_OF_CAPABILITIES_LIST()
 };
 
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 
 static const struct rte_cryptodev_capabilities dpaa2_pdcp_capabilities[] = {
 	{	/* SNOW 3G (UIA2) */
drivers/crypto/dpaa_sec/dpaa_sec.c +12 -12
index 97002170b0..c4d1747a77 100644
@@ -15,7 +15,7 @@
 #include <rte_cryptodev_pmd.h>
 #include <rte_crypto.h>
 #include <rte_cryptodev.h>
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 #include <rte_security_driver.h>
 #endif
 #include <rte_cycles.h>
@@ -229,7 +229,7 @@ static inline int is_decode(dpaa_sec_session *ses)
 	return ses->dir == DIR_DEC;
 }
 
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 static int
 dpaa_sec_prep_pdcp_cdb(dpaa_sec_session *ses)
 {
@@ -408,7 +408,7 @@ dpaa_sec_prep_cdb(dpaa_sec_session *ses)
 	memset(cdb, 0, sizeof(struct sec_cdb));
 
 	switch (ses->ctxt) {
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 	case DPAA_SEC_IPSEC:
 		shared_desc_len = dpaa_sec_prep_ipsec_cdb(ses);
 		break;
@@ -1539,7 +1539,7 @@ build_cipher_auth(struct rte_crypto_op *op, dpaa_sec_session *ses)
 	return cf;
 }
 
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 static inline struct dpaa_sec_job *
 build_proto(struct rte_crypto_op *op, dpaa_sec_session *ses)
 {
@@ -1714,7 +1714,7 @@ dpaa_sec_enqueue_burst(void *qp, struct rte_crypto_op **ops,
 							op->sym->session,
 							cryptodev_driver_id);
 				break;
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 			case RTE_CRYPTO_OP_SECURITY_SESSION:
 				ses = (dpaa_sec_session *)
 					get_sec_session_private_data(
@@ -1761,7 +1761,7 @@ dpaa_sec_enqueue_burst(void *qp, struct rte_crypto_op **ops,
 				  ((op->sym->m_dst == NULL) ||
 				   rte_pktmbuf_is_contiguous(op->sym->m_dst))) {
 				switch (ses->ctxt) {
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 				case DPAA_SEC_PDCP:
 				case DPAA_SEC_IPSEC:
 					cf = build_proto(op, ses);
@@ -1795,7 +1795,7 @@ dpaa_sec_enqueue_burst(void *qp, struct rte_crypto_op **ops,
 				}
 			} else {
 				switch (ses->ctxt) {
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 				case DPAA_SEC_PDCP:
 				case DPAA_SEC_IPSEC:
 					cf = build_proto_sg(op, ses);
@@ -1852,7 +1852,7 @@ dpaa_sec_enqueue_burst(void *qp, struct rte_crypto_op **ops,
 					((auth_tail_len << 16) | auth_hdr_len);
 			}
 
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 			/* In case of PDCP, per packet HFN is stored in
 			 * mbuf priv after sym_op.
 			 */
@@ -2467,7 +2467,7 @@ dpaa_sec_sym_session_clear(struct rte_cryptodev *dev,
 	}
 }
 
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 static int
 dpaa_sec_ipsec_aead_init(struct rte_crypto_aead_xform *aead_xform,
 			struct rte_security_ipsec_xform *ipsec_xform,
@@ -3271,7 +3271,7 @@ static struct rte_cryptodev_ops crypto_ops = {
 	.sym_session_clear        = dpaa_sec_sym_session_clear
 };
 
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 static const struct rte_security_capability *
 dpaa_sec_capabilities_get(void *device __rte_unused)
 {
@@ -3310,7 +3310,7 @@ static int
 dpaa_sec_dev_init(struct rte_cryptodev *cryptodev)
 {
 	struct dpaa_sec_dev_private *internals;
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 	struct rte_security_ctx *security_instance;
 #endif
 	struct dpaa_sec_qp *qp;
@@ -3347,7 +3347,7 @@ dpaa_sec_dev_init(struct rte_cryptodev *cryptodev)
 		DPAA_SEC_WARN("Device already init by primary process");
 		return 0;
 	}
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 	/* Initialize security_ctx only for primary process*/
 	security_instance = rte_malloc("rte_security_instances_ops",
 				sizeof(struct rte_security_ctx), 0);
drivers/crypto/dpaa_sec/dpaa_sec.h +4 -4
index 2cd50cc8dd..45ae534990 100644
@@ -98,7 +98,7 @@ struct sec_cdb {
 
 	uint32_t sh_desc[DPAA_SEC_MAX_DESC_SIZE];
 };
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 /*!
  * The structure is to be filled by user as a part of
  * dpaa_sec_proto_ctxt for PDCP Protocol
@@ -125,7 +125,7 @@ typedef struct dpaa_sec_session_entry {
 	enum rte_crypto_cipher_algorithm cipher_alg; /*!< Cipher Algorithm*/
 	enum rte_crypto_auth_algorithm auth_alg; /*!< Authentication Algorithm*/
 	enum rte_crypto_aead_algorithm aead_alg; /*!< AEAD Algorithm*/
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 	enum rte_security_session_protocol proto_alg; /*!< Security Algorithm*/
 #endif
 	union {
@@ -168,7 +168,7 @@ typedef struct dpaa_sec_session_entry {
 			uint8_t auth_cipher_text;
 				/**< Authenticate/cipher ordering */
 		};
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 		struct sec_pdcp_ctxt pdcp;
 #endif
 	};
@@ -568,7 +568,7 @@ static const struct rte_cryptodev_capabilities dpaa_sec_capabilities[] = {
 	RTE_CRYPTODEV_END_OF_CAPABILITIES_LIST()
 };
 
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 static const struct rte_cryptodev_capabilities dpaa_pdcp_capabilities[] = {
 	{	/* SNOW 3G (UIA2) */
 		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
drivers/crypto/qat/qat_sym.c +1 -1
index e3f98a76ba..4b7676deb8 100644
@@ -180,7 +180,7 @@ qat_sym_build_request(void *in_op, uint8_t *out_msg,
 	} else if (op->sess_type == RTE_CRYPTO_OP_WITH_SESSION) {
 		ctx = (struct qat_sym_session *)get_sym_session_private_data(
 				op->sym->session, qat_sym_driver_id);
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 	} else {
 		ctx = (struct qat_sym_session *)get_sec_session_private_data(
 				op->sym->sec_session);
drivers/crypto/qat/qat_sym.h +4 -4
index 1a9748849e..da67a56b30 100644
@@ -6,7 +6,7 @@
 #define _QAT_SYM_H_
 
 #include <rte_cryptodev_pmd.h>
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 #include <rte_net_crc.h>
 #endif
 
@@ -135,7 +135,7 @@ qat_bpicipher_postprocess(struct qat_sym_session *ctx,
 	return sym_op->cipher.data.length - last_block_len;
 }
 
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 static inline void
 qat_crc_verify(struct qat_sym_session *ctx, struct rte_crypto_op *op)
 {
@@ -231,7 +231,7 @@ qat_sym_process_response(void **op, uint8_t *resp)
 
 		rx_op->status = RTE_CRYPTO_OP_STATUS_AUTH_FAILED;
 	} else {
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 		uint8_t is_docsis_sec = 0;
 
 		if (rx_op->sess_type == RTE_CRYPTO_OP_SECURITY_SESSION) {
@@ -256,7 +256,7 @@ qat_sym_process_response(void **op, uint8_t *resp)
 
 		if (sess->bpi_ctx) {
 			qat_bpicipher_postprocess(sess, rx_op);
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 			if (is_docsis_sec)
 				qat_crc_verify(sess, rx_op);
 #endif
drivers/crypto/qat/qat_sym_capabilities.h +1 -1
index 4ee798992d..f7cab2f471 100644
@@ -731,7 +731,7 @@
 		}, }							\
 	}
 
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 #define QAT_SECURITY_SYM_CAPABILITIES					\
 	{	/* AES DOCSIS BPI */					\
 		.op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,			\
drivers/crypto/qat/qat_sym_pmd.c +6 -6
index 314742f534..a291004cf5 100644
@@ -8,7 +8,7 @@
 #include <rte_malloc.h>
 #include <rte_pci.h>
 #include <rte_cryptodev_pmd.h>
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 #include <rte_security_driver.h>
 #endif
 
@@ -39,7 +39,7 @@ static const struct rte_cryptodev_capabilities qat_gen3_sym_capabilities[] = {
 	RTE_CRYPTODEV_END_OF_CAPABILITIES_LIST()
 };
 
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 static const struct rte_cryptodev_capabilities
 					qat_security_sym_capabilities[] = {
 	QAT_SECURITY_SYM_CAPABILITIES,
@@ -261,7 +261,7 @@ static struct rte_cryptodev_ops crypto_qat_ops = {
 		.sym_session_clear	= qat_sym_session_clear
 };
 
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 static const struct rte_security_capability *
 qat_security_cap_get(void *device __rte_unused)
 {
@@ -385,7 +385,7 @@ qat_sym_dev_create(struct qat_pci_device *qat_pci_dev,
 			"QAT_SYM_CAPA_GEN_%d",
 			qat_pci_dev->qat_dev_gen);
 
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 	struct rte_security_ctx *security_instance;
 	security_instance = rte_malloc("qat_sec",
 				sizeof(struct rte_security_ctx),
@@ -462,7 +462,7 @@ qat_sym_dev_create(struct qat_pci_device *qat_pci_dev,
 	return 0;
 
 error:
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 	rte_free(cryptodev->security_ctx);
 	cryptodev->security_ctx = NULL;
 #endif
@@ -487,7 +487,7 @@ qat_sym_dev_destroy(struct qat_pci_device *qat_pci_dev)
 
 	/* free crypto device */
 	cryptodev = rte_cryptodev_pmd_get_dev(qat_pci_dev->sym_dev->sym_dev_id);
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 	rte_free(cryptodev->security_ctx);
 	cryptodev->security_ctx = NULL;
 #endif
drivers/crypto/qat/qat_sym_pmd.h +1 -1
index f32a77e608..e0992cbe27 100644
@@ -9,7 +9,7 @@
 
 #include <rte_ether.h>
 #include <rte_cryptodev.h>
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 #include <rte_security.h>
 #endif
 
drivers/crypto/qat/qat_sym_session.c +2 -2
index ed4d001592..23d059bf84 100644
@@ -14,7 +14,7 @@
 #include <rte_log.h>
 #include <rte_malloc.h>
 #include <rte_crypto_sym.h>
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 #include <rte_security.h>
 #endif
 
@@ -2109,7 +2109,7 @@ int qat_sym_validate_zuc_key(int key_len, enum icp_qat_hw_cipher_algo *alg)
 	return 0;
 }
 
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 static int
 qat_sec_session_check_docsis(struct rte_security_session_conf *conf)
 {
drivers/crypto/qat/qat_sym_session.h +2 -2
index 9f1033baf6..011e5bb7ab 100644
@@ -6,7 +6,7 @@
 
 #include <rte_crypto.h>
 #include <rte_cryptodev_pmd.h>
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 #include <rte_security.h>
 #endif
 
@@ -159,7 +159,7 @@ qat_cipher_get_block_size(enum icp_qat_hw_cipher_algo qat_cipher_alg);
 int
 qat_sym_validate_zuc_key(int key_len, enum icp_qat_hw_cipher_algo *alg);
 
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 int
 qat_security_session_create(void *dev, struct rte_security_session_conf *conf,
 		struct rte_security_session *sess, struct rte_mempool *mempool);
drivers/net/ixgbe/ixgbe_ethdev.c +3 -3
index 0b98e210e7..7cdb4dfe6a 100644
@@ -33,7 +33,7 @@
 #include <rte_random.h>
 #include <rte_dev.h>
 #include <rte_hash_crc.h>
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 #include <rte_security_driver.h>
 #endif
 
@@ -1151,7 +1151,7 @@ eth_ixgbe_dev_init(struct rte_eth_dev *eth_dev, void *init_params __rte_unused)
 	/* Unlock any pending hardware semaphore */
 	ixgbe_swfw_lock_reset(hw);
 
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 	/* Initialize security_ctx only for primary process*/
 	if (ixgbe_ipsec_ctx_create(eth_dev))
 		return -ENOMEM;
@@ -3053,7 +3053,7 @@ ixgbe_dev_close(struct rte_eth_dev *dev)
 	/* Remove all Traffic Manager configuration */
 	ixgbe_tm_conf_uninit(dev);
 
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 	rte_free(dev->security_ctx);
 #endif
 
drivers/net/ixgbe/ixgbe_ethdev.h +2 -2
index 9bdef87fbd..33905f7136 100644
@@ -12,7 +12,7 @@
 #include "base/ixgbe_dcb_82599.h"
 #include "base/ixgbe_dcb_82598.h"
 #include "ixgbe_bypass.h"
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 #include "ixgbe_ipsec.h"
 #endif
 #include <rte_flow.h>
@@ -494,7 +494,7 @@ struct ixgbe_adapter {
 	struct ixgbe_filter_info    filter;
 	struct ixgbe_l2_tn_info     l2_tn;
 	struct ixgbe_bw_conf        bw_conf;
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 	struct ixgbe_ipsec          ipsec;
 #endif
 	bool rx_bulk_alloc_allowed;
drivers/net/ixgbe/ixgbe_flow.c +3 -3
index b2a2bfc02f..6b3dea46ee 100644
@@ -215,7 +215,7 @@ cons_parse_ntuple_filter(const struct rte_flow_attr *attr,
 	memset(&eth_null, 0, sizeof(struct rte_flow_item_eth));
 	memset(&vlan_null, 0, sizeof(struct rte_flow_item_vlan));
 
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 	/**
 	 *  Special case for flow action type RTE_FLOW_ACTION_TYPE_SECURITY
 	 */
@@ -629,7 +629,7 @@ ixgbe_parse_ntuple_filter(struct rte_eth_dev *dev,
 	if (ret)
 		return ret;
 
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 	/* ESP flow not really a flow*/
 	if (filter->proto == IPPROTO_ESP)
 		return 0;
@@ -3057,7 +3057,7 @@ ixgbe_flow_create(struct rte_eth_dev *dev,
 	ret = ixgbe_parse_ntuple_filter(dev, attr, pattern,
 			actions, &ntuple_filter, error);
 
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 	/* ESP flow not really a flow*/
 	if (ntuple_filter.proto == IPPROTO_ESP)
 		return flow;
drivers/net/ixgbe/ixgbe_rxtx.c +13 -13
index 977ecf5137..a456a4697b 100644
@@ -452,7 +452,7 @@ ixgbe_set_xmit_ctx(struct ixgbe_tx_queue *txq,
 		seqnum_seed |= tx_offload.l2_len
 			       << IXGBE_ADVTXD_TUNNEL_LEN;
 	}
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 	if (ol_flags & PKT_TX_SEC_OFFLOAD) {
 		union ixgbe_crypto_tx_desc_md *md =
 				(union ixgbe_crypto_tx_desc_md *)mdata;
@@ -645,7 +645,7 @@ ixgbe_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
 	uint32_t ctx = 0;
 	uint32_t new_ctx;
 	union ixgbe_tx_offload tx_offload;
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 	uint8_t use_ipsec;
 #endif
 
@@ -675,7 +675,7 @@ ixgbe_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
 		 * are needed for offload functionality.
 		 */
 		ol_flags = tx_pkt->ol_flags;
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 		use_ipsec = txq->using_ipsec && (ol_flags & PKT_TX_SEC_OFFLOAD);
 #endif
 
@@ -689,7 +689,7 @@ ixgbe_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
 			tx_offload.tso_segsz = tx_pkt->tso_segsz;
 			tx_offload.outer_l2_len = tx_pkt->outer_l2_len;
 			tx_offload.outer_l3_len = tx_pkt->outer_l3_len;
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 			if (use_ipsec) {
 				union ixgbe_crypto_tx_desc_md *ipsec_mdata =
 					(union ixgbe_crypto_tx_desc_md *)
@@ -876,7 +876,7 @@ ixgbe_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
 		}
 
 		olinfo_status |= (pkt_len << IXGBE_ADVTXD_PAYLEN_SHIFT);
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 		if (use_ipsec)
 			olinfo_status |= IXGBE_ADVTXD_POPTS_IPSEC;
 #endif
@@ -1460,7 +1460,7 @@ rx_desc_error_to_pkt_flags(uint32_t rx_status)
 		pkt_flags |= PKT_RX_EIP_CKSUM_BAD;
 	}
 
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 	if (rx_status & IXGBE_RXD_STAT_SECP) {
 		pkt_flags |= PKT_RX_SEC_OFFLOAD;
 		if (rx_status & IXGBE_RXDADV_LNKSEC_ERROR_BAD_SIG)
@@ -2399,7 +2399,7 @@ ixgbe_dev_tx_done_cleanup(void *tx_queue, uint32_t free_cnt)
 {
 	struct ixgbe_tx_queue *txq = (struct ixgbe_tx_queue *)tx_queue;
 	if (txq->offloads == 0 &&
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 			!(txq->using_ipsec) &&
 #endif
 			txq->tx_rs_thresh >= RTE_PMD_IXGBE_TX_MAX_BURST) {
@@ -2495,7 +2495,7 @@ ixgbe_set_tx_function(struct rte_eth_dev *dev, struct ixgbe_tx_queue *txq)
 {
 	/* Use a simple Tx queue (no offloads, no multi segs) if possible */
 	if ((txq->offloads == 0) &&
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 			!(txq->using_ipsec) &&
 #endif
 			(txq->tx_rs_thresh >= RTE_PMD_IXGBE_TX_MAX_BURST)) {
@@ -2554,7 +2554,7 @@ ixgbe_get_tx_port_offloads(struct rte_eth_dev *dev)
 	    hw->mac.type == ixgbe_mac_X550EM_a)
 		tx_offload_capa |= DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM;
 
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 	if (dev->security_ctx)
 		tx_offload_capa |= DEV_TX_OFFLOAD_SECURITY;
 #endif
@@ -2722,7 +2722,7 @@ ixgbe_dev_tx_queue_setup(struct rte_eth_dev *dev,
 	txq->offloads = offloads;
 	txq->ops = &def_txq_ops;
 	txq->tx_deferred_start = tx_conf->tx_deferred_start;
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 	txq->using_ipsec = !!(dev->data->dev_conf.txmode.offloads &
 			DEV_TX_OFFLOAD_SECURITY);
 #endif
@@ -3005,7 +3005,7 @@ ixgbe_get_rx_port_offloads(struct rte_eth_dev *dev)
 	    hw->mac.type == ixgbe_mac_X550EM_a)
 		offloads |= DEV_RX_OFFLOAD_OUTER_IPV4_CKSUM;
 
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 	if (dev->security_ctx)
 		offloads |= DEV_RX_OFFLOAD_SECURITY;
 #endif
@@ -4834,7 +4834,7 @@ ixgbe_set_rx_function(struct rte_eth_dev *dev)
 		struct ixgbe_rx_queue *rxq = dev->data->rx_queues[i];
 
 		rxq->rx_using_sse = rx_using_sse;
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 		rxq->using_ipsec = !!(dev->data->dev_conf.rxmode.offloads &
 				DEV_RX_OFFLOAD_SECURITY);
 #endif
@@ -5346,7 +5346,7 @@ ixgbe_dev_rxtx_start(struct rte_eth_dev *dev)
 			ixgbe_setup_loopback_link_x540_x550(hw, true);
 	}
 
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 	if ((dev->data->dev_conf.rxmode.offloads &
 			DEV_RX_OFFLOAD_SECURITY) ||
 		(dev->data->dev_conf.txmode.offloads &
drivers/net/ixgbe/ixgbe_rxtx.h +3 -3
index 7e09291b22..fa15911121 100644
@@ -113,7 +113,7 @@ struct ixgbe_rx_queue {
 	uint16_t rx_free_trigger; /**< triggers rx buffer allocation */
 	uint8_t            rx_using_sse;
 	/**< indicates that vector RX is in use */
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 	uint8_t            using_ipsec;
 	/**< indicates that IPsec RX feature is in use */
 #endif
@@ -161,7 +161,7 @@ union ixgbe_tx_offload {
 		/* fields for TX offloading of tunnels */
 		uint64_t outer_l3_len:8; /**< Outer L3 (IP) Hdr Length. */
 		uint64_t outer_l2_len:8; /**< Outer L2 (MAC) Hdr Length. */
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 		/* inline ipsec related*/
 		uint64_t sa_idx:8;	/**< TX SA database entry index */
 		uint64_t sec_pad_len:4;	/**< padding length */
@@ -230,7 +230,7 @@ struct ixgbe_tx_queue {
 	struct ixgbe_advctx_info ctx_cache[IXGBE_CTX_NUM];
 	const struct ixgbe_txq_ops *ops;       /**< txq ops */
 	uint8_t             tx_deferred_start; /**< not in global dev start. */
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 	uint8_t		    using_ipsec;
 	/**< indicates that IPsec TX feature is in use */
 #endif
drivers/net/ixgbe/ixgbe_rxtx_vec_sse.c +3 -3
index 517ca31669..e7ccb72a72 100644
@@ -93,7 +93,7 @@ ixgbe_rxq_rearm(struct ixgbe_rx_queue *rxq)
 	IXGBE_PCI_REG_WRITE(rxq->rdt_reg_addr, rx_id);
 }
 
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 static inline void
 desc_to_olflags_v_ipsec(__m128i descs[4], struct rte_mbuf **rx_pkts)
 {
@@ -318,7 +318,7 @@ _recv_raw_pkts_vec(struct ixgbe_rx_queue *rxq, struct rte_mbuf **rx_pkts,
 	volatile union ixgbe_adv_rx_desc *rxdp;
 	struct ixgbe_rx_entry *sw_ring;
 	uint16_t nb_pkts_recd;
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 	uint8_t use_ipsec = rxq->using_ipsec;
 #endif
 	int pos;
@@ -484,7 +484,7 @@ _recv_raw_pkts_vec(struct ixgbe_rx_queue *rxq, struct rte_mbuf **rx_pkts,
 		/* set ol_flags with vlan packet type */
 		desc_to_olflags_v(descs, mbuf_init, vlan_flags, &rx_pkts[pos]);
 
-#ifdef RTE_LIBRTE_SECURITY
+#ifdef RTE_LIB_SECURITY
 		if (unlikely(use_ipsec))
 			desc_to_olflags_v_ipsec(descs, &rx_pkts[pos]);
 #endif
drivers/net/kni/meson.build +1 -1
index 0539b4768a..d9fa898d1a 100644
@@ -2,7 +2,7 @@
 # Copyright(c) 2018 Intel Corporation
 
 # this driver can be built if-and-only-if KNI library is buildable
-build = dpdk_conf.has('RTE_LIBRTE_KNI')
+build = dpdk_conf.has('RTE_LIB_KNI')
 reason = 'missing dependency, DPDK KNI library'
 sources = files('rte_eth_kni.c')
 deps += 'kni'
drivers/net/netvsc/meson.build +1 -1
index e7f4493028..f3f52f7327 100644
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: BSD-3-Clause
 # Copyright(c) 2018 Microsoft Corporation
 
-build = dpdk_conf.has('RTE_LIBRTE_VMBUS_BUS')
+build = dpdk_conf.has('RTE_BUS_VMBUS')
 reason = 'missing dependency, DPDK VMBus driver'
 sources = files('hn_ethdev.c', 'hn_rxtx.c', 'hn_rndis.c', 'hn_nvs.c', 'hn_vf.c')
 
drivers/net/vhost/meson.build +1 -1
index d7930862a7..963b30f209 100644
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: BSD-3-Clause
 # Copyright(c) 2018 Intel Corporation
 
-build = dpdk_conf.has('RTE_LIBRTE_VHOST')
+build = dpdk_conf.has('RTE_LIB_VHOST')
 reason = 'missing dependency, DPDK vhost library'
 sources = files('rte_eth_vhost.c')
 install_headers('rte_eth_vhost.h')
drivers/raw/dpaa2_cmdif/meson.build +1 -1
index e7656a3cda..06c0fe756d 100644
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: BSD-3-Clause
 # Copyright 2018 NXP
 
-build = dpdk_conf.has('RTE_LIBRTE_DPAA2_MEMPOOL')
+build = dpdk_conf.has('RTE_MEMPOOL_DPAA2')
 reason = 'missing dependency, DPDK DPAA2 mempool driver'
 deps += ['rawdev', 'mempool_dpaa2', 'bus_vdev']
 sources = files('dpaa2_cmdif.c')
drivers/raw/dpaa2_qdma/meson.build +1 -1
index b9b08153ac..3eeab0d1c1 100644
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: BSD-3-Clause
 # Copyright 2018 NXP
 
-build = dpdk_conf.has('RTE_LIBRTE_DPAA2_MEMPOOL')
+build = dpdk_conf.has('RTE_MEMPOOL_DPAA2')
 reason = 'missing dependency, DPDK DPAA2 mempool driver'
 deps += ['rawdev', 'mempool_dpaa2', 'ring', 'kvargs']
 sources = files('dpaa2_qdma.c')
drivers/raw/ifpga/base/opae_osdep.h +1 -1
index 416cef01cb..18e6a11aac 100644
@@ -8,7 +8,7 @@
 #include <string.h>
 #include <stdbool.h>
 
-#ifdef RTE_LIBRTE_EAL
+#ifdef RTE_LIB_EAL
 #include "osdep_rte/osdep_generic.h"
 #else
 #include "osdep_raw/osdep_generic.h"
drivers/vdpa/ifc/meson.build +1 -1
index b179987f98..9d256af4b9 100644
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: BSD-3-Clause
 # Copyright(c) 2018 Intel Corporation
 
-build = dpdk_conf.has('RTE_LIBRTE_VHOST')
+build = dpdk_conf.has('RTE_LIB_VHOST')
 reason = 'missing dependency, DPDK vhost library'
 sources = files('ifcvf_vdpa.c', 'base/ifcvf.c')
 includes += include_directories('base')
examples/distributor/meson.build +1 -1
index 9fec7f883f..5244cd4ffc 100644
@@ -7,7 +7,7 @@
 # DPDK instance, use 'make'
 
 # require the power library
-build = dpdk_conf.has('RTE_LIBRTE_POWER')
+build = dpdk_conf.has('RTE_LIB_POWER')
 
 allow_experimental_apis = true
 deps += ['distributor', 'power']
examples/ethtool/lib/rte_ethtool.c +2 -2
index db8150efd5..13f9ba3795 100644
@@ -9,7 +9,7 @@
 #include <rte_ethdev.h>
 #include <rte_ether.h>
 #include <rte_bus_pci.h>
-#ifdef RTE_LIBRTE_IXGBE_PMD
+#ifdef RTE_NET_IXGBE
 #include <rte_pmd_ixgbe.h>
 #endif
 #include "rte_ethtool.h"
@@ -395,7 +395,7 @@ rte_ethtool_net_set_rx_mode(uint16_t port_id)
 
 	/* Set VF vf_rx_mode, VF unsupport status is discard */
 	for (vf = 0; vf < num_vfs; vf++) {
-#ifdef RTE_LIBRTE_IXGBE_PMD
+#ifdef RTE_NET_IXGBE
 		rte_pmd_ixgbe_set_vf_rxmode(port_id, vf,
 			ETH_VMDQ_ACCEPT_UNTAG, 0);
 #endif
examples/ethtool/meson.build +1 -1
index fdfdd1971e..cc8edac3df 100644
@@ -13,7 +13,7 @@ sources = files('lib/rte_ethtool.c',
 includes = include_directories('lib', 'ethtool-app')
 
 deps += 'bus_pci'
-if dpdk_conf.has('RTE_LIBRTE_IXGBE_PMD')
+if dpdk_conf.has('RTE_NET_IXGBE')
 	deps += 'net_ixgbe'
 endif
 
examples/ioat/meson.build +1 -1
index f1a045a0a6..6afbaa6803 100644
@@ -7,7 +7,7 @@
 # DPDK instance, use 'make'
 
 allow_experimental_apis = true
-build = dpdk_conf.has('RTE_LIBRTE_PMD_IOAT_RAWDEV')
+build = dpdk_conf.has('RTE_RAW_IOAT')
 
 deps += ['raw_ioat']
 
examples/ip_pipeline/kni.c +2 -2
index 4519685932..a2d3331cb0 100644
@@ -24,7 +24,7 @@ kni_init(void)
 {
 	TAILQ_INIT(&kni_list);
 
-#ifdef RTE_LIBRTE_KNI
+#ifdef RTE_LIB_KNI
 	rte_kni_init(KNI_MAX);
 #endif
 
@@ -46,7 +46,7 @@ kni_find(const char *name)
 	return NULL;
 }
 
-#ifndef RTE_LIBRTE_KNI
+#ifndef RTE_LIB_KNI
 
 struct kni *
 kni_create(const char *name __rte_unused,
examples/ip_pipeline/kni.h +2 -2
index c3856456d6..118f48df73 100644
@@ -8,7 +8,7 @@
 #include <stdint.h>
 #include <sys/queue.h>
 
-#ifdef RTE_LIBRTE_KNI
+#ifdef RTE_LIB_KNI
 #include <rte_kni.h>
 #endif
 
@@ -17,7 +17,7 @@
 struct kni {
 	TAILQ_ENTRY(kni) node;
 	char name[NAME_SIZE];
-#ifdef RTE_LIBRTE_KNI
+#ifdef RTE_LIB_KNI
 	struct rte_kni *k;
 #endif
 };
examples/ip_pipeline/pipeline.c +7 -7
index b627310a0c..7ebabcae98 100644
@@ -11,7 +11,7 @@
 
 #include <rte_string_fns.h>
 #include <rte_port_ethdev.h>
-#ifdef RTE_LIBRTE_KNI
+#ifdef RTE_LIB_KNI
 #include <rte_port_kni.h>
 #endif
 #include <rte_port_ring.h>
@@ -28,7 +28,7 @@
 #include <rte_table_lpm_ipv6.h>
 #include <rte_table_stub.h>
 
-#ifdef RTE_LIBRTE_KNI
+#ifdef RTE_LIB_KNI
 #include "kni.h"
 #endif
 #include "link.h"
@@ -160,7 +160,7 @@ pipeline_port_in_create(const char *pipeline_name,
 		struct rte_port_ring_reader_params ring;
 		struct rte_port_sched_reader_params sched;
 		struct rte_port_fd_reader_params fd;
-#ifdef RTE_LIBRTE_KNI
+#ifdef RTE_LIB_KNI
 		struct rte_port_kni_reader_params kni;
 #endif
 		struct rte_port_source_params source;
@@ -264,7 +264,7 @@ pipeline_port_in_create(const char *pipeline_name,
 		break;
 	}
 
-#ifdef RTE_LIBRTE_KNI
+#ifdef RTE_LIB_KNI
 	case PORT_IN_KNI:
 	{
 		struct kni *kni;
@@ -404,7 +404,7 @@ pipeline_port_out_create(const char *pipeline_name,
 		struct rte_port_ring_writer_params ring;
 		struct rte_port_sched_writer_params sched;
 		struct rte_port_fd_writer_params fd;
-#ifdef RTE_LIBRTE_KNI
+#ifdef RTE_LIB_KNI
 		struct rte_port_kni_writer_params kni;
 #endif
 		struct rte_port_sink_params sink;
@@ -415,7 +415,7 @@ pipeline_port_out_create(const char *pipeline_name,
 		struct rte_port_ethdev_writer_nodrop_params ethdev;
 		struct rte_port_ring_writer_nodrop_params ring;
 		struct rte_port_fd_writer_nodrop_params fd;
-#ifdef RTE_LIBRTE_KNI
+#ifdef RTE_LIB_KNI
 		struct rte_port_kni_writer_nodrop_params kni;
 #endif
 		struct rte_port_sym_crypto_writer_nodrop_params sym_crypto;
@@ -537,7 +537,7 @@ pipeline_port_out_create(const char *pipeline_name,
 		break;
 	}
 
-#ifdef RTE_LIBRTE_KNI
+#ifdef RTE_LIB_KNI
 	case PORT_OUT_KNI:
 	{
 		struct kni *kni;
examples/kni/meson.build +1 -1
index fd6ae4442a..58639b1392 100644
@@ -7,7 +7,7 @@
 # DPDK instance, use 'make'
 
 # this app can be built if-and-only-if KNI library is buildable
-build = dpdk_conf.has('RTE_LIBRTE_KNI')
+build = dpdk_conf.has('RTE_LIB_KNI')
 deps += ['kni', 'bus_pci']
 sources = files(
 	'main.c'
examples/l2fwd-crypto/main.c +2 -2
index 820470db50..8ea2677e56 100644
@@ -43,7 +43,7 @@
 #include <rte_prefetch.h>
 #include <rte_random.h>
 #include <rte_hexdump.h>
-#ifdef RTE_LIBRTE_PMD_CRYPTO_SCHEDULER
+#ifdef RTE_CRYPTO_SCHEDULER
 #include <rte_cryptodev_scheduler.h>
 #endif
 
@@ -2273,7 +2273,7 @@ initialize_cryptodevs(struct l2fwd_crypto_options *options, unsigned nb_ports,
 		 * (one for the header, one for the private data)
 		 */
 		if (!strcmp(dev_info.driver_name, "crypto_scheduler")) {
-#ifdef RTE_LIBRTE_PMD_CRYPTO_SCHEDULER
+#ifdef RTE_CRYPTO_SCHEDULER
 			uint32_t nb_slaves =
 				rte_cryptodev_scheduler_slaves_get(cdev_id,
 								NULL);
examples/l2fwd-crypto/meson.build +1 -1
index 9002d62a6c..1813f015b2 100644
@@ -7,7 +7,7 @@
 # DPDK instance, use 'make'
 
 deps += 'cryptodev'
-if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER')
+if dpdk_conf.has('RTE_CRYPTO_SCHEDULER')
 	deps += 'crypto_scheduler'
 endif
 allow_experimental_apis = true
examples/l3fwd-power/meson.build +1 -1
index 4cd694710d..eb8aef306a 100644
@@ -6,7 +6,7 @@
 # To build this example as a standalone application with an already-installed
 # DPDK instance, use 'make'
 
-if not dpdk_conf.has('RTE_LIBRTE_POWER')
+if not dpdk_conf.has('RTE_LIB_POWER')
         build = false
         subdir_done()
 endif
examples/ntb/meson.build +1 -1
index bac6e5cd23..b0201f68b1 100644
@@ -15,6 +15,6 @@ cflags += ['-D_FILE_OFFSET_BITS=64']
 sources = files(
 	'ntb_fwd.c'
 )
-if dpdk_conf.has('RTE_LIBRTE_PMD_NTB_RAWDEV')
+if dpdk_conf.has('RTE_RAW_NTB')
 	deps += 'raw_ntb'
 endif
examples/vhost_crypto/meson.build +1 -1
index 2485f3bd10..b2c125e2fa 100644
@@ -6,7 +6,7 @@
 # To build this example as a standalone application with an already-installed
 # DPDK instance, use 'make'
 
-build = dpdk_conf.has('RTE_LIBRTE_VHOST')
+build = dpdk_conf.has('RTE_LIB_VHOST')
 allow_experimental_apis = true
 deps += ['vhost', 'cryptodev']
 sources = files(
examples/vm_power_manager/channel_monitor.c +4 -4
index 1d00a6cf6c..228f06803d 100644
@@ -28,7 +28,7 @@
 #include <rte_atomic.h>
 #include <rte_cycles.h>
 #include <rte_ethdev.h>
-#ifdef RTE_LIBRTE_I40E_PMD
+#ifdef RTE_NET_I40E
 #include <rte_pmd_i40e.h>
 #endif
 #include <rte_power.h>
@@ -439,7 +439,7 @@ get_pfid(struct policy *pol)
 	for (i = 0; i < pol->pkt.nb_mac_to_monitor; i++) {
 
 		RTE_ETH_FOREACH_DEV(x) {
-#ifdef RTE_LIBRTE_I40E_PMD
+#ifdef RTE_NET_I40E
 			ret = rte_pmd_i40e_query_vfid_by_mac(x,
 				(struct rte_ether_addr *)&(pol->pkt.vfid[i]));
 #else
@@ -538,13 +538,13 @@ get_pkt_diff(struct policy *pol)
 		vsi_pkt_count_prev_total = 0;
 	double rdtsc_curr, rdtsc_diff, diff;
 	int x;
-#ifdef RTE_LIBRTE_I40E_PMD
+#ifdef RTE_NET_I40E
 	struct rte_eth_stats vf_stats;
 #endif
 
 	for (x = 0; x < pol->pkt.nb_mac_to_monitor; x++) {
 
-#ifdef RTE_LIBRTE_I40E_PMD
+#ifdef RTE_NET_I40E
 		/*Read vsi stats*/
 		if (rte_pmd_i40e_get_vf_stats(x, pol->pfid[x], &vf_stats) == 0)
 			vsi_pkt_count = vf_stats.ipackets;
examples/vm_power_manager/guest_cli/meson.build +1 -1
index 8c725420d7..cd95266018 100644
@@ -6,7 +6,7 @@
 # To build this example as a standalone application with an already-installed
 # DPDK instance, use 'make'
 
-if not dpdk_conf.has('RTE_LIBRTE_POWER')
+if not dpdk_conf.has('RTE_LIB_POWER')
         build = false
         subdir_done()
 endif
examples/vm_power_manager/main.c +6 -6
index 44d2508b10..17b38406fc 100644
@@ -31,13 +31,13 @@
 #include "vm_power_cli.h"
 #include "oob_monitor.h"
 #include "parse.h"
-#ifdef RTE_LIBRTE_IXGBE_PMD
+#ifdef RTE_NET_IXGBE
 #include <rte_pmd_ixgbe.h>
 #endif
-#ifdef RTE_LIBRTE_I40E_PMD
+#ifdef RTE_NET_I40E
 #include <rte_pmd_i40e.h>
 #endif
-#ifdef RTE_LIBRTE_BNXT_PMD
+#ifdef RTE_NET_BNXT
 #include <rte_pmd_bnxt.h>
 #endif
 
@@ -397,16 +397,16 @@ main(int argc, char **argv)
 				eth.addr_bytes[5] = w + 0xf0;
 
 				ret = -ENOTSUP;
-#ifdef RTE_LIBRTE_IXGBE_PMD
+#ifdef RTE_NET_IXGBE
 				ret = rte_pmd_ixgbe_set_vf_mac_addr(portid,
 							w, &eth);
 #endif
-#ifdef RTE_LIBRTE_I40E_PMD
+#ifdef RTE_NET_I40E
 				if (ret == -ENOTSUP)
 					ret = rte_pmd_i40e_set_vf_mac_addr(
 							portid, w, &eth);
 #endif
-#ifdef RTE_LIBRTE_BNXT_PMD
+#ifdef RTE_NET_BNXT
 				if (ret == -ENOTSUP)
 					ret = rte_pmd_bnxt_set_vf_mac_addr(
 							portid, w, &eth);
examples/vm_power_manager/meson.build +4 -4
index 2dd132015f..1f813fbe87 100644
@@ -6,22 +6,22 @@
 # To build this example as a standalone application with an already-installed
 # DPDK instance, use 'make'
 
-if not dpdk_conf.has('RTE_LIBRTE_POWER')
+if not dpdk_conf.has('RTE_LIB_POWER')
 	build = false
 	subdir_done()
 endif
 
 deps += ['power']
 
-if dpdk_conf.has('RTE_LIBRTE_BNXT_PMD')
+if dpdk_conf.has('RTE_NET_BNXT')
 	deps += ['net_bnxt']
 endif
 
-if dpdk_conf.has('RTE_LIBRTE_I40E_PMD')
+if dpdk_conf.has('RTE_NET_I40E')
 	deps += ['net_i40e']
 endif
 
-if dpdk_conf.has('RTE_LIBRTE_IXGBE_PMD')
+if dpdk_conf.has('RTE_NET_IXGBE')
 	deps += ['net_ixgbe']
 endif
 
lib/librte_eal/linux/eal.c +2 -2
index 9cf0e2ec01..9b579b8200 100644
@@ -1085,7 +1085,7 @@ rte_eal_init(int argc, char **argv)
 				 */
 				iova_mode = RTE_IOVA_VA;
 				RTE_LOG(DEBUG, EAL, "Physical addresses are unavailable, selecting IOVA as VA mode.\n");
-#if defined(RTE_LIBRTE_KNI) && LINUX_VERSION_CODE >= KERNEL_VERSION(4, 10, 0)
+#if defined(RTE_LIB_KNI) && LINUX_VERSION_CODE >= KERNEL_VERSION(4, 10, 0)
 			} else if (rte_eal_check_module("rte_kni") == 1) {
 				iova_mode = RTE_IOVA_PA;
 				RTE_LOG(DEBUG, EAL, "KNI is loaded, selecting IOVA as PA mode for better KNI performance.\n");
@@ -1102,7 +1102,7 @@ rte_eal_init(int argc, char **argv)
 				RTE_LOG(DEBUG, EAL, "IOMMU is not available, selecting IOVA as PA mode.\n");
 			}
 		}
-#if defined(RTE_LIBRTE_KNI) && LINUX_VERSION_CODE < KERNEL_VERSION(4, 10, 0)
+#if defined(RTE_LIB_KNI) && LINUX_VERSION_CODE < KERNEL_VERSION(4, 10, 0)
 		/* Workaround for KNI which requires physical address to work
 		 * in kernels < 4.10
 		 */
lib/librte_metrics/rte_metrics_telemetry.c +2 -2
index 289ebae0bd..b97152aeb0 100644
@@ -6,7 +6,7 @@
 
 #include <rte_ethdev.h>
 #include <rte_string_fns.h>
-#ifdef RTE_LIBRTE_TELEMETRY
+#ifdef RTE_LIB_TELEMETRY
 #include <rte_telemetry_legacy.h>
 #endif
 
@@ -529,7 +529,7 @@ RTE_LOG_REGISTER(metrics_log_level, lib.metrics, ERR);
 
 RTE_INIT(metrics_ctor)
 {
-#ifdef RTE_LIBRTE_TELEMETRY
+#ifdef RTE_LIB_TELEMETRY
 	rte_telemetry_legacy_register("ports_all_stat_values", DATA_NOT_REQ,
 			handle_ports_all_stats_values);
 	rte_telemetry_legacy_register("global_stat_values", DATA_NOT_REQ,
lib/librte_metrics/rte_metrics_telemetry.h +1 -1
index 6c2391c563..3435a55425 100644
@@ -2,7 +2,7 @@
  * Copyright(c) 2020 Intel Corporation
  */
 
-#ifdef RTE_LIBRTE_TELEMETRY
+#ifdef RTE_LIB_TELEMETRY
 #include <jansson.h>
 #else
 #define json_t void *
lib/librte_port/meson.build +1 -1
index 9bbae28b75..609624c290 100644
@@ -33,7 +33,7 @@ if dpdk_conf.has('RTE_PORT_PCAP')
 	ext_deps += pcap_dep # dependency provided in config/meson.build
 endif
 
-if dpdk_conf.has('RTE_LIBRTE_KNI')
+if dpdk_conf.has('RTE_LIB_KNI')
 	sources += files('rte_port_kni.c')
 	headers += files('rte_port_kni.h')
 	deps += 'kni'
lib/meson.build +1 -1
index 38678a7fb5..1d40cb13a9 100644
@@ -72,7 +72,7 @@ foreach l:libraries
 	ext_deps = []
 	deps = []
 	# eal is standard dependency once built
-	if dpdk_conf.has('RTE_LIBRTE_EAL')
+	if dpdk_conf.has('RTE_LIB_EAL')
 		deps += ['eal']
 	endif
 
Signature · 1 line
2.25.1
#24 lore raw

RFC PATCH v2 8/8 build: remove compatibility build defines

In reply to Bruce Richardson

As announced in the deprecation note, remove all compatibility build defines from previous make/meson versions and use only the standardized ones - RTE_LIB_<name> for libraries, and RTE_<CLASS>_<NAME> for drivers.

---
 config/meson.build                    |   2 +-
 config/rte_compatibility_defines.h    | 129 --------------------------
 config/rte_config.h                   |   1 -
 drivers/baseband/meson.build          |   2 -
 drivers/bus/meson.build               |   1 -
 drivers/common/meson.build            |   1 -
 drivers/compress/meson.build          |   1 -
 drivers/compress/octeontx/meson.build |   1 -
 drivers/crypto/meson.build            |   1 -
 drivers/crypto/null/meson.build       |   1 -
 drivers/crypto/octeontx/meson.build   |   1 -
 drivers/crypto/octeontx2/meson.build  |   1 -
 drivers/crypto/scheduler/meson.build  |   1 -
 drivers/crypto/virtio/meson.build     |   1 -
 drivers/event/meson.build             |   1 -
 drivers/mempool/meson.build           |   1 -
 drivers/meson.build                   |  23 -----
 drivers/net/meson.build               |   1 -
 drivers/raw/meson.build               |   1 -
 drivers/regex/meson.build             |   1 -
 drivers/regex/mlx5/meson.build        |   1 -
 drivers/vdpa/meson.build              |   1 -
 drivers/vdpa/mlx5/meson.build         |   1 -
 lib/meson.build                       |   3 +-
 24 files changed, 2 insertions(+), 176 deletions(-)
 delete mode 100644 config/rte_compatibility_defines.h
config/meson.build +1 -1
index 3a36d9dd4c..860dfd2e67 100644
@@ -254,7 +254,7 @@ dpdk_conf.set('RTE_COMPILE_TIME_CPUFLAGS', ','.join(compile_time_cpuflags))
 # set the install path for the drivers
 dpdk_conf.set_quoted('RTE_EAL_PMD_PATH', eal_pmd_path)
 
-install_headers(['rte_config.h', 'rte_compatibility_defines.h'],
+install_headers(['rte_config.h'],
 		subdir: get_option('include_subdir_arch'))
 
 # enable VFIO only if it is linux OS
config/rte_compatibility_defines.h deleted +0 -129

129 lines not on this page · raw message

config/rte_config.h +0 -1
index cacc1837cf..0bae630fd9 100644
@@ -13,7 +13,6 @@
 #define _RTE_CONFIG_H_
 
 #include <rte_build_config.h>
-#include <rte_compatibility_defines.h>
 
 /* legacy defines */
 #ifdef RTE_EXEC_ENV_LINUX
drivers/baseband/meson.build +0 -2
index 7e1b64ffdd..4102769827 100644
@@ -6,5 +6,3 @@ if is_windows
 endif
 
 drivers = ['null', 'turbo_sw', 'fpga_lte_fec', 'fpga_5gnr_fec']
-
-config_flag_fmt = 'RTE_LIBRTE_PMD_BBDEV_@0@'
drivers/bus/meson.build +0 -1
index bd73efd187..2e7727af08 100644
@@ -3,4 +3,3 @@
 
 drivers = ['dpaa', 'fslmc', 'ifpga', 'pci', 'vdev', 'vmbus']
 std_deps = ['eal']
-config_flag_fmt = 'RTE_LIBRTE_@0@_BUS'
drivers/common/meson.build +0 -1
index d78882f05e..ba6325adf3 100644
@@ -7,4 +7,3 @@ endif
 
 std_deps = ['eal']
 drivers = ['cpt', 'dpaax', 'iavf', 'mvep', 'octeontx', 'octeontx2', 'sfc_efx']
-config_flag_fmt = 'RTE_LIBRTE_@0@_COMMON'
drivers/compress/meson.build +0 -1
index 33f5e33dde..cd96def086 100644
@@ -8,4 +8,3 @@ endif
 drivers = ['isal', 'octeontx', 'zlib']
 
 std_deps = ['compressdev'] # compressdev pulls in all other needed deps
-config_flag_fmt = 'RTE_LIBRTE_PMD_@0@'
drivers/compress/octeontx/meson.build +0 -1
index 2d71b4da21..e1b7bed422 100644
@@ -1,7 +1,6 @@
 # SPDX-License-Identifier: BSD-3-Clause
 # Copyright(c) 2018 Cavium, Inc
 
-fmt_name = 'octeontx_compress'
 sources = files('otx_zip.c', 'otx_zip_pmd.c')
 includes += include_directories('include')
 deps += ['mempool_octeontx', 'bus_pci']
drivers/crypto/meson.build +0 -1
index fa5c7ef3a5..8a82be9b05 100644
@@ -25,4 +25,3 @@ drivers = ['aesni_gcm',
 	   'zuc']
 
 std_deps = ['cryptodev'] # cryptodev pulls in all other needed deps
-config_flag_fmt = 'RTE_LIBRTE_PMD_@0@'
drivers/crypto/null/meson.build +0 -1
index 421414916c..1f7d644de1 100644
@@ -2,5 +2,4 @@
 # Copyright(c) 2017 Intel Corporation
 
 deps += 'bus_vdev'
-fmt_name = 'null_crypto'
 sources = files('null_crypto_pmd.c', 'null_crypto_pmd_ops.c')
drivers/crypto/octeontx/meson.build +0 -1
index d6939720d8..ef3c003945 100644
@@ -7,7 +7,6 @@ endif
 
 deps += ['bus_pci']
 deps += ['common_cpt']
-fmt_name = 'octeontx_crypto'
 
 sources = files('otx_cryptodev.c',
 		'otx_cryptodev_capabilities.c',
drivers/crypto/octeontx2/meson.build +0 -1
index bf502e247d..87296f2a2a 100644
@@ -11,7 +11,6 @@ deps += ['common_cpt']
 deps += ['common_octeontx2']
 deps += ['ethdev']
 deps += ['security']
-fmt_name = 'octeontx2_crypto'
 
 sources = files('otx2_cryptodev.c',
 		'otx2_cryptodev_capabilities.c',
drivers/crypto/scheduler/meson.build +0 -1
index 2209c50232..b67d9306e0 100644
@@ -2,7 +2,6 @@
 # Copyright(c) 2018 Luca Boccassi <[email protected]>
 
 deps += ['bus_vdev', 'reorder']
-fmt_name = 'crypto_scheduler'
 sources = files(
 	'rte_cryptodev_scheduler.c',
 	'scheduler_failover.c',
drivers/crypto/virtio/meson.build +0 -1
index 6cea782deb..20e9e9551e 100644
@@ -3,6 +3,5 @@
 
 includes += include_directories('../../../lib/librte_vhost')
 deps += 'bus_pci'
-fmt_name = 'virtio_crypto'
 sources = files('virtio_cryptodev.c', 'virtio_pci.c',
 		'virtio_rxtx.c', 'virtqueue.c')
drivers/event/meson.build +0 -1
index a7dac99de2..a2b6cedaa8 100644
@@ -11,4 +11,3 @@ if not (toolchain == 'gcc' and cc.version().version_compare('<4.8.6') and
 	drivers += 'octeontx'
 endif
 std_deps = ['eventdev', 'kvargs']
-config_flag_fmt = 'RTE_LIBRTE_PMD_@0@_EVENTDEV'
drivers/mempool/meson.build +0 -1
index 036647149e..16b9693505 100644
@@ -7,4 +7,3 @@ endif
 
 drivers = ['bucket', 'dpaa', 'dpaa2', 'octeontx', 'octeontx2', 'ring', 'stack']
 std_deps = ['mempool']
-config_flag_fmt = 'RTE_LIBRTE_@0@_MEMPOOL'
drivers/meson.build +0 -23
index a5a6fed06e..ad3fecb86f 100644
@@ -32,7 +32,6 @@ endif
 foreach subpath:subdirs
 	drivers = []
 	std_deps = []
-	config_flag_fmt = '' # format string used to set the value in dpdk_conf
 
 	# subpath can be either "class" or "class/driver"
 	if subpath.contains('/')
@@ -58,7 +57,6 @@ foreach subpath:subdirs
 		build = true # set to false to disable, e.g. missing deps
 		reason = '<unknown reason>' # set if build == false to explain
 		name = drv
-		fmt_name = ''
 		sources = []
 		objs = []
 		cflags = default_cflags
@@ -113,27 +111,6 @@ foreach subpath:subdirs
 			lib_name = '_'.join(['rte', class, name])
 			dpdk_conf.set(lib_name.to_upper(), 1)
 
-			if fmt_name == ''
-				fmt_name = name
-			endif
-
-			dpdk_conf.set(config_flag_fmt.format(fmt_name.to_upper()),1) #old-style macro
-			# for driver compatibility, since we changed the
-			# default to match that of make. Remove in future release
-			# after following deprecation process
-			if config_flag_fmt.contains('_PMD_@0@') and (class == 'crypto'
-					or class == 'compress'
-					or class == 'event')
-				alt_flag_fmt = '_@0@_PMD'.join(
-						config_flag_fmt.split('_PMD_@0@'))
-				if config_flag_fmt.contains('EVENTDEV')
-					alt_flag_fmt = '_@0@_EVENTDEV_PMD'.join(
-						config_flag_fmt.split('_PMD_@0@_EVENTDEV'))
-				endif
-				dpdk_conf.set(alt_flag_fmt.format(
-						fmt_name.to_upper()), 1)
-			endif
-
 			dpdk_extra_ldflags += pkgconfig_extra_libs
 
 			# generate pmdinfo sources by building a temporary
drivers/net/meson.build +0 -1
index 4e4c2c976a..0612dc9c59 100644
@@ -58,4 +58,3 @@ drivers = ['af_packet',
 std_deps = ['ethdev', 'kvargs'] # 'ethdev' also pulls in mbuf, net, eal etc
 std_deps += ['bus_pci']         # very many PMDs depend on PCI, so make std
 std_deps += ['bus_vdev']        # same with vdev bus
-config_flag_fmt = 'RTE_LIBRTE_@0@_PMD'
drivers/raw/meson.build +0 -1
index d8d6cf5824..8c3a036dfd 100644
@@ -11,4 +11,3 @@ drivers = ['dpaa2_cmdif', 'dpaa2_qdma',
 	'octeontx2_ep',
 	'skeleton']
 std_deps = ['rawdev']
-config_flag_fmt = 'RTE_LIBRTE_PMD_@0@_RAWDEV'
drivers/regex/meson.build +0 -1
index f171e9fdf0..8ce5bafe9e 100644
@@ -3,4 +3,3 @@
 
 drivers = ['mlx5']
 std_deps = ['ethdev', 'kvargs'] # 'ethdev' also pulls in mbuf, net, eal etc
-config_flag_fmt = 'RTE_LIBRTE_@0@_PMD'
drivers/regex/mlx5/meson.build +0 -1
index d7cb2c5721..87e9611812 100644
@@ -7,7 +7,6 @@ if not is_linux
 	subdir_done()
 endif
 
-fmt_name = 'mlx5_regex'
 deps += ['common_mlx5', 'eal', 'regexdev']
 sources = files(
 	'mlx5_regex.c',
drivers/vdpa/meson.build +0 -1
index b346e43086..4929be4c03 100644
@@ -9,4 +9,3 @@ drivers = ['ifc',
 	   'mlx5',]
 std_deps = ['bus_pci', 'kvargs']
 std_deps += ['vhost']
-config_flag_fmt = 'RTE_LIBRTE_@0@_PMD'
drivers/vdpa/mlx5/meson.build +0 -1
index 254a8ec14b..a83ca86b3f 100644
@@ -7,7 +7,6 @@ if not is_linux
 	subdir_done()
 endif
 
-fmt_name = 'mlx5_vdpa'
 deps += ['hash', 'common_mlx5', 'vhost', 'pci', 'eal', 'sched']
 sources = files(
 	'mlx5_vdpa.c',
lib/meson.build +1 -2
index 1d40cb13a9..faeb22695c 100644
@@ -97,8 +97,7 @@ foreach l:libraries
 		set_variable(name.underscorify() + '_disable_reason', reason)
 	else
 		enabled_libs += name
-		dpdk_conf.set('RTE_LIBRTE_' + name.to_upper(), 1) #old macro
-		dpdk_conf.set('RTE_LIB_' + name.to_upper(), 1) # new macro
+		dpdk_conf.set('RTE_LIB_' + name.to_upper(), 1)
 		install_headers(headers)
 
 		libname = 'rte_' + name
Signature · 1 line
2.25.1
#25 lore raw

v3 cover Rework build macros

In reply to Bruce Richardson

Following on from discussion in RFC v1 and v2 of this set, this version reworks the automated macros defined by meson to indicate if a particular library or driver is enabled in the build. However, while it does so, it also maintains compatibility with previous releases to ease the transition for any apps using the older macros, which already has to contend with a change in DPDK build-system and to switch over to picking up the library names from pkg-config.

Advantages of this rework:
* Much cleaner having standard macros
* No need for defining the format of macros for each class
* Shorter macros (for the most part)

Disadvantages:
* Potentially requires application changes
* Inconsistency between the auto-defined macros and the other feature-set ones.

v3: rebased to latest
dropped RFC from title
dropped 21.02 cleanup patch so whole patchset targets 20.11

Bruce Richardson (7):
app: fix missing dependencies examples/l2fwd-crypto: fix missing dependency
build: add defines for compatibility with make build
qat: build from common folder
build: remove library name from version map filename
build: standardize component names and defines
build: replace use of old build macros

 app/proc-info/main.c                          |   4 +-
 app/test-bbdev/meson.build                    |   8 +-
 app/test-bbdev/test_bbdev_perf.c              |   8 +-
 app/test-crypto-perf/cperf_ops.c              |   6 +-
 app/test-crypto-perf/cperf_options.h          |   6 +-
 app/test-crypto-perf/cperf_options_parsing.c  |  16 +-
 .../cperf_test_pmd_cyclecount.c               |   2 +-
 app/test-crypto-perf/cperf_test_throughput.c  |   2 +-
 app/test-crypto-perf/main.c                   |   6 +-
 app/test-crypto-perf/meson.build              |   3 +
 app/test-pipeline/main.c                      |   2 +-
 app/test-pmd/bpf_cmd.h                        |   4 +-
 app/test-pmd/cmdline.c                        | 190 +++++++++---------
 app/test-pmd/config.c                         |  18 +-
 app/test-pmd/meson.build                      |  34 +++-
 app/test-pmd/parameters.c                     |  30 +--
 app/test-pmd/testpmd.c                        |  38 ++--
 app/test-pmd/testpmd.h                        |   4 +-
 app/test/meson.build                          |  29 +--
 app/test/process.h                            |  16 +-
 app/test/test.c                               |  20 +-
 app/test/test_cryptodev.c                     |  26 +--
 app/test/test_cryptodev_hash_test_vectors.h   |   2 +-
 app/test/test_eal_flags.c                     |   4 +-
 app/test/test_func_reentrancy.c               |  24 +--
 app/test/test_kni.c                           |   2 +-
 app/test/test_mp_secondary.c                  |  12 +-
 app/test/test_power.c                         |   2 +-
 app/test/test_power_cpufreq.c                 |   2 +-
 app/test/test_power_kvm_vm.c                  |   2 +-
 app/test/test_table.c                         |   2 +-
 app/test/test_table.h                         |   2 +-
 app/test/test_table_combined.h                |   2 +-
 app/test/test_table_tables.h                  |   2 +-
 config/arm/meson.build                        |   6 +-
 config/meson.build                            |   3 +-
 config/rte_compatibility_defines.h            | 129 ++++++++++++
 config/rte_config.h                           |   1 +
 doc/guides/rel_notes/deprecation.rst          |   8 +
 ..._fpga_5gnr_fec_version.map => version.map} |   0
 ...v_fpga_lte_fec_version.map => version.map} |   0
 drivers/baseband/meson.build                  |   1 -
 ...pmd_bbdev_null_version.map => version.map} |   0
 ...bbdev_turbo_sw_version.map => version.map} |   0
 .../{rte_bus_dpaa_version.map => version.map} |   0
 drivers/bus/fslmc/portal/dpaa2_hw_dpio.c      |   6 +-
 ...{rte_bus_fslmc_version.map => version.map} |   0
 ...{rte_bus_ifpga_version.map => version.map} |   0
 drivers/bus/meson.build                       |   1 -
 .../{rte_bus_pci_version.map => version.map}  |   0
 .../{rte_bus_vdev_version.map => version.map} |   0
 ...{rte_bus_vmbus_version.map => version.map} |   0
 ...rte_common_cpt_version.map => version.map} |   0
 ...e_common_dpaax_version.map => version.map} |   0
 ...te_common_iavf_version.map => version.map} |   0
 drivers/common/meson.build                    |   3 +-
 drivers/common/mlx5/meson.build               |   1 -
 ...te_common_mlx5_version.map => version.map} |   0
 ...te_common_mvep_version.map => version.map} |   0
 ...ommon_octeontx_version.map => version.map} |   0
 ...mmon_octeontx2_version.map => version.map} |   0
 drivers/common/qat/meson.build                |  68 ++++++-
 .../qat/version.map}                          |   0
 ...common_sfc_efx_version.map => version.map} |   0
 .../version.map}                              |   0
 drivers/compress/meson.build                  |   5 +-
 drivers/compress/octeontx/meson.build         |   2 +-
 .../version.map}                              |   0
 drivers/compress/qat/meson.build              |  17 --
 drivers/compress/qat/qat_comp.h               |   2 +-
 drivers/compress/qat/qat_comp_pmd.h           |   2 +-
 .../{rte_pmd_zlib_version.map => version.map} |   0
 ..._pmd_aesni_gcm_version.map => version.map} |   0
 .../crypto/aesni_mb/aesni_mb_pmd_private.h    |   2 +-
 ...e_pmd_aesni_mb_version.map => version.map} |   0
 ...{rte_pmd_armv8_version.map => version.map} |   0
 ...te_pmd_caam_jr_version.map => version.map} |   0
 .../{rte_pmd_ccp_version.map => version.map}  |   0
 drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c   |  22 +-
 drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h     |   8 +-
 ..._pmd_dpaa2_sec_version.map => version.map} |   0
 drivers/crypto/dpaa_sec/dpaa_sec.c            |  24 +--
 drivers/crypto/dpaa_sec/dpaa_sec.h            |   8 +-
 ...e_pmd_dpaa_sec_version.map => version.map} |   0
 ...rte_pmd_kasumi_version.map => version.map} |   0
 drivers/crypto/meson.build                    |   4 +-
 ...{rte_pmd_mvsam_version.map => version.map} |   0
 ...rte_pmd_nitrox_version.map => version.map} |   0
 drivers/crypto/null/meson.build               |   2 +-
 ...md_null_crypto_version.map => version.map} |   0
 drivers/crypto/octeontx/meson.build           |   2 +-
 ...cteontx_crypto_version.map => version.map} |   0
 drivers/crypto/octeontx2/meson.build          |   2 +-
 ...teontx2_crypto_version.map => version.map} |   0
 ...te_pmd_openssl_version.map => version.map} |   0
 drivers/crypto/qat/meson.build                |  23 ---
 drivers/crypto/qat/qat_sym.c                  |   2 +-
 drivers/crypto/qat/qat_sym.h                  |   8 +-
 drivers/crypto/qat/qat_sym_capabilities.h     |   2 +-
 drivers/crypto/qat/qat_sym_pmd.c              |  12 +-
 drivers/crypto/qat/qat_sym_pmd.h              |   2 +-
 drivers/crypto/qat/qat_sym_session.c          |   4 +-
 drivers/crypto/qat/qat_sym_session.h          |   4 +-
 drivers/crypto/scheduler/meson.build          |   2 +-
 ...ypto_scheduler_version.map => version.map} |   0
 ...rte_pmd_snow3g_version.map => version.map} |   0
 drivers/crypto/virtio/meson.build             |   2 +-
 ..._virtio_crypto_version.map => version.map} |   0
 .../{rte_pmd_zuc_version.map => version.map}  |   0
 drivers/event/dpaa/meson.build                |   2 +-
 ...pmd_dpaa_event_version.map => version.map} |   0
 drivers/event/dpaa2/meson.build               |   2 +-
 ...md_dpaa2_event_version.map => version.map} |   0
 ..._pmd_dsw_event_version.map => version.map} |   0
 drivers/event/meson.build                     |   3 +-
 drivers/event/octeontx/meson.build            |   2 +-
 ...octeontx_event_version.map => version.map} |   0
 drivers/event/octeontx2/meson.build           |   2 +-
 ...cteontx2_event_version.map => version.map} |   0
 ...pmd_opdl_event_version.map => version.map} |   0
 ...skeleton_event_version.map => version.map} |   0
 ...e_pmd_sw_event_version.map => version.map} |   0
 ...mempool_bucket_version.map => version.map} |   0
 ...e_mempool_dpaa_version.map => version.map} |   0
 ..._mempool_dpaa2_version.map => version.map} |   0
 drivers/mempool/meson.build                   |   1 -
 ...mpool_octeontx_version.map => version.map} |   0
 ...pool_octeontx2_version.map => version.map} |   0
 ...e_mempool_ring_version.map => version.map} |   0
 ..._mempool_stack_version.map => version.map} |   0
 drivers/meson.build                           |  29 ++-
 ..._pmd_af_packet_version.map => version.map} |   0
 ...rte_pmd_af_xdp_version.map => version.map} |   0
 .../{rte_pmd_ark_version.map => version.map}  |   0
 ...e_pmd_atlantic_version.map => version.map} |   0
 .../{rte_pmd_avp_version.map => version.map}  |   0
 ...{rte_pmd_axgbe_version.map => version.map} |   0
 ...{rte_pmd_bnx2x_version.map => version.map} |   0
 .../{rte_pmd_bnxt_version.map => version.map} |   0
 .../{rte_pmd_bond_version.map => version.map} |   0
 ...{rte_pmd_cxgbe_version.map => version.map} |   0
 .../{rte_pmd_dpaa_version.map => version.map} |   0
 ...{rte_pmd_dpaa2_version.map => version.map} |   0
 ...{rte_pmd_e1000_version.map => version.map} |   0
 .../{rte_pmd_ena_version.map => version.map}  |   0
 ...{rte_pmd_enetc_version.map => version.map} |   0
 .../{rte_pmd_enic_version.map => version.map} |   0
 ...e_pmd_failsafe_version.map => version.map} |   0
 ...{rte_pmd_fm10k_version.map => version.map} |   0
 ...{rte_pmd_hinic_version.map => version.map} |   0
 .../{rte_pmd_hns3_version.map => version.map} |   0
 .../{rte_pmd_i40e_version.map => version.map} |   0
 .../{rte_pmd_iavf_version.map => version.map} |   0
 .../{rte_pmd_ice_version.map => version.map}  |   0
 .../{rte_pmd_igc_version.map => version.map}  |   0
 ...{rte_pmd_ionic_version.map => version.map} |   0
 ...rte_pmd_ipn3ke_version.map => version.map} |   0
 drivers/net/ixgbe/ixgbe_ethdev.c              |   6 +-
 drivers/net/ixgbe/ixgbe_ethdev.h              |   4 +-
 drivers/net/ixgbe/ixgbe_flow.c                |   6 +-
 drivers/net/ixgbe/ixgbe_rxtx.c                |  26 +--
 drivers/net/ixgbe/ixgbe_rxtx.h                |   6 +-
 drivers/net/ixgbe/ixgbe_rxtx_vec_sse.c        |   6 +-
 ...{rte_pmd_ixgbe_version.map => version.map} |   0
 drivers/net/kni/meson.build                   |   2 +-
 .../{rte_pmd_kni_version.map => version.map}  |   0
 ...e_pmd_liquidio_version.map => version.map} |   0
 ...{rte_pmd_memif_version.map => version.map} |   0
 drivers/net/meson.build                       |   1 -
 drivers/net/mlx4/meson.build                  |   2 +-
 .../{rte_pmd_mlx4_version.map => version.map} |   0
 .../{rte_pmd_mlx5_version.map => version.map} |   0
 ...rte_pmd_mvneta_version.map => version.map} |   0
 ...{rte_pmd_mvpp2_version.map => version.map} |   0
 drivers/net/netvsc/meson.build                |   2 +-
 ...rte_pmd_netvsc_version.map => version.map} |   0
 .../{rte_pmd_nfb_version.map => version.map}  |   0
 .../{rte_pmd_nfp_version.map => version.map}  |   0
 .../{rte_pmd_null_version.map => version.map} |   0
 ...e_pmd_octeontx_version.map => version.map} |   0
 ..._pmd_octeontx2_version.map => version.map} |   0
 .../{rte_pmd_pcap_version.map => version.map} |   0
 .../{rte_pmd_pfe_version.map => version.map}  |   0
 .../{rte_pmd_qede_version.map => version.map} |   0
 .../{rte_pmd_ring_version.map => version.map} |   0
 .../{rte_pmd_sfc_version.map => version.map}  |   0
 ...te_pmd_softnic_version.map => version.map} |   0
 ...e_pmd_szedata2_version.map => version.map} |   0
 .../{rte_pmd_tap_version.map => version.map}  |   0
 ...e_pmd_thunderx_version.map => version.map} |   0
 ...md_vdev_netvsc_version.map => version.map} |   0
 drivers/net/vhost/meson.build                 |   2 +-
 ...{rte_pmd_vhost_version.map => version.map} |   0
 ...rte_pmd_virtio_version.map => version.map} |   0
 ...te_pmd_vmxnet3_version.map => version.map} |   0
 drivers/raw/dpaa2_cmdif/meson.build           |   2 +-
 ...ev_dpaa2_cmdif_version.map => version.map} |   0
 drivers/raw/dpaa2_qdma/meson.build            |   2 +-
 ...dev_dpaa2_qdma_version.map => version.map} |   0
 drivers/raw/ifpga/base/opae_osdep.h           |   2 +-
 drivers/raw/ifpga/meson.build                 |   2 +-
 ...e_rawdev_ifpga_version.map => version.map} |   0
 ...te_rawdev_ioat_version.map => version.map} |   0
 drivers/raw/meson.build                       |   1 -
 ...rte_rawdev_ntb_version.map => version.map} |   0
 ..._octeontx2_dma_version.map => version.map} |   0
 ...v_octeontx2_ep_version.map => version.map} |   0
 ...awdev_skeleton_version.map => version.map} |   0
 drivers/regex/meson.build                     |   1 -
 ...pmd_mlx5_regex_version.map => version.map} |   0
 ...cteontx2_regex_version.map => version.map} |   0
 drivers/vdpa/ifc/meson.build                  |   2 +-
 .../{rte_pmd_ifc_version.map => version.map}  |   0
 drivers/vdpa/meson.build                      |   1 -
 ..._pmd_mlx5_vdpa_version.map => version.map} |   0
 examples/bond/meson.build                     |   2 +-
 examples/distributor/meson.build              |   2 +-
 examples/ethtool/lib/rte_ethtool.c            |   4 +-
 examples/ethtool/meson.build                  |   4 +-
 examples/ioat/meson.build                     |   4 +-
 examples/ip_pipeline/kni.c                    |   4 +-
 examples/ip_pipeline/kni.h                    |   4 +-
 examples/ip_pipeline/pipeline.c               |  14 +-
 examples/kni/meson.build                      |   2 +-
 examples/l2fwd-crypto/main.c                  |   4 +-
 examples/l2fwd-crypto/meson.build             |   3 +
 examples/l3fwd-power/meson.build              |   2 +-
 examples/ntb/meson.build                      |   4 +-
 examples/vhost_crypto/meson.build             |   2 +-
 examples/vm_power_manager/channel_monitor.c   |   8 +-
 .../vm_power_manager/guest_cli/meson.build    |   2 +-
 examples/vm_power_manager/main.c              |  12 +-
 examples/vm_power_manager/meson.build         |  14 +-
 .../{rte_acl_version.map => version.map}      |   0
 .../{rte_bbdev_version.map => version.map}    |   0
 ...e_bitratestats_version.map => version.map} |   0
 .../{rte_bpf_version.map => version.map}      |   0
 .../{rte_cfgfile_version.map => version.map}  |   0
 .../{rte_cmdline_version.map => version.map}  |   0
 ...te_compressdev_version.map => version.map} |   0
 ...{rte_cryptodev_version.map => version.map} |   0
 ...te_distributor_version.map => version.map} |   0
 lib/librte_eal/linux/eal.c                    |   4 +-
 .../{rte_eal_version.map => version.map}      |   0
 .../{rte_efd_version.map => version.map}      |   0
 lib/librte_ethdev/meson.build                 |   1 -
 .../{rte_ethdev_version.map => version.map}   |   0
 .../{rte_eventdev_version.map => version.map} |   0
 .../{rte_fib_version.map => version.map}      |   0
 ..._flow_classify_version.map => version.map} |   0
 lib/librte_graph/meson.build                  |   2 -
 .../{rte_graph_version.map => version.map}    |   0
 .../{rte_gro_version.map => version.map}      |   0
 .../{rte_gso_version.map => version.map}      |   0
 .../{rte_hash_version.map => version.map}     |   0
 .../{rte_ip_frag_version.map => version.map}  |   0
 .../{rte_ipsec_version.map => version.map}    |   0
 .../{rte_jobstats_version.map => version.map} |   0
 .../{rte_kni_version.map => version.map}      |   0
 .../{rte_kvargs_version.map => version.map}   |   0
 ...e_latencystats_version.map => version.map} |   0
 .../{rte_lpm_version.map => version.map}      |   0
 .../{rte_mbuf_version.map => version.map}     |   0
 .../{rte_member_version.map => version.map}   |   0
 .../{rte_mempool_version.map => version.map}  |   0
 .../{rte_meter_version.map => version.map}    |   0
 lib/librte_metrics/rte_metrics_telemetry.c    |   4 +-
 lib/librte_metrics/rte_metrics_telemetry.h    |   2 +-
 .../{rte_metrics_version.map => version.map}  |   0
 .../{rte_net_version.map => version.map}      |   0
 .../{rte_node_version.map => version.map}     |   0
 .../{rte_pci_version.map => version.map}      |   0
 .../{rte_pdump_version.map => version.map}    |   0
 .../{rte_pipeline_version.map => version.map} |   0
 lib/librte_port/meson.build                   |   2 +-
 .../{rte_port_version.map => version.map}     |   0
 .../{rte_power_version.map => version.map}    |   0
 .../{rte_rawdev_version.map => version.map}   |   0
 .../{rte_rcu_version.map => version.map}      |   0
 .../{rte_regexdev_version.map => version.map} |   0
 .../{rte_reorder_version.map => version.map}  |   0
 .../{rte_rib_version.map => version.map}      |   0
 .../{rte_ring_version.map => version.map}     |   0
 .../{rte_sched_version.map => version.map}    |   0
 .../{rte_security_version.map => version.map} |   0
 .../{rte_stack_version.map => version.map}    |   0
 .../{rte_table_version.map => version.map}    |   0
 ...{rte_telemetry_version.map => version.map} |   0
 .../{rte_timer_version.map => version.map}    |   0
 .../{rte_vhost_version.map => version.map}    |   0
 lib/meson.build                               |   9 +-
 291 files changed, 660 insertions(+), 492 deletions(-)
 create mode 100644 config/rte_compatibility_defines.h
 rename drivers/baseband/fpga_5gnr_fec/{rte_pmd_bbdev_fpga_5gnr_fec_version.map => version.map} (100%)
 rename drivers/baseband/fpga_lte_fec/{rte_pmd_bbdev_fpga_lte_fec_version.map => version.map} (100%)
 rename drivers/baseband/null/{rte_pmd_bbdev_null_version.map => version.map} (100%)
 rename drivers/baseband/turbo_sw/{rte_pmd_bbdev_turbo_sw_version.map => version.map} (100%)
 rename drivers/bus/dpaa/{rte_bus_dpaa_version.map => version.map} (100%)
 rename drivers/bus/fslmc/{rte_bus_fslmc_version.map => version.map} (100%)
 rename drivers/bus/ifpga/{rte_bus_ifpga_version.map => version.map} (100%)
 rename drivers/bus/pci/{rte_bus_pci_version.map => version.map} (100%)
 rename drivers/bus/vdev/{rte_bus_vdev_version.map => version.map} (100%)
 rename drivers/bus/vmbus/{rte_bus_vmbus_version.map => version.map} (100%)
 rename drivers/common/cpt/{rte_common_cpt_version.map => version.map} (100%)
 rename drivers/common/dpaax/{rte_common_dpaax_version.map => version.map} (100%)
 rename drivers/common/iavf/{rte_common_iavf_version.map => version.map} (100%)
 rename drivers/common/mlx5/{rte_common_mlx5_version.map => version.map} (100%)
 rename drivers/common/mvep/{rte_common_mvep_version.map => version.map} (100%)
 rename drivers/common/octeontx/{rte_common_octeontx_version.map => version.map} (100%)
 rename drivers/common/octeontx2/{rte_common_octeontx2_version.map => version.map} (100%)
 rename drivers/{compress/isal/rte_pmd_isal_version.map => common/qat/version.map} (100%)
 rename drivers/common/sfc_efx/{rte_common_sfc_efx_version.map => version.map} (100%)
 rename drivers/compress/{octeontx/rte_pmd_octeontx_compress_version.map => isal/version.map} (100%)
 rename drivers/compress/{qat/rte_pmd_qat_version.map => octeontx/version.map} (100%)
 delete mode 100644 drivers/compress/qat/meson.build
 rename drivers/compress/zlib/{rte_pmd_zlib_version.map => version.map} (100%)
 rename drivers/crypto/aesni_gcm/{rte_pmd_aesni_gcm_version.map => version.map} (100%)
 rename drivers/crypto/aesni_mb/{rte_pmd_aesni_mb_version.map => version.map} (100%)
 rename drivers/crypto/armv8/{rte_pmd_armv8_version.map => version.map} (100%)
 rename drivers/crypto/caam_jr/{rte_pmd_caam_jr_version.map => version.map} (100%)
 rename drivers/crypto/ccp/{rte_pmd_ccp_version.map => version.map} (100%)
 rename drivers/crypto/dpaa2_sec/{rte_pmd_dpaa2_sec_version.map => version.map} (100%)
 rename drivers/crypto/dpaa_sec/{rte_pmd_dpaa_sec_version.map => version.map} (100%)
 rename drivers/crypto/kasumi/{rte_pmd_kasumi_version.map => version.map} (100%)
 rename drivers/crypto/mvsam/{rte_pmd_mvsam_version.map => version.map} (100%)
 rename drivers/crypto/nitrox/{rte_pmd_nitrox_version.map => version.map} (100%)
 rename drivers/crypto/null/{rte_pmd_null_crypto_version.map => version.map} (100%)
 rename drivers/crypto/octeontx/{rte_pmd_octeontx_crypto_version.map => version.map} (100%)
 rename drivers/crypto/octeontx2/{rte_pmd_octeontx2_crypto_version.map => version.map} (100%)
 rename drivers/crypto/openssl/{rte_pmd_openssl_version.map => version.map} (100%)
 delete mode 100644 drivers/crypto/qat/meson.build
 rename drivers/crypto/scheduler/{rte_pmd_crypto_scheduler_version.map => version.map} (100%)
 rename drivers/crypto/snow3g/{rte_pmd_snow3g_version.map => version.map} (100%)
 rename drivers/crypto/virtio/{rte_pmd_virtio_crypto_version.map => version.map} (100%)
 rename drivers/crypto/zuc/{rte_pmd_zuc_version.map => version.map} (100%)
 rename drivers/event/dpaa/{rte_pmd_dpaa_event_version.map => version.map} (100%)
 rename drivers/event/dpaa2/{rte_pmd_dpaa2_event_version.map => version.map} (100%)
 rename drivers/event/dsw/{rte_pmd_dsw_event_version.map => version.map} (100%)
 rename drivers/event/octeontx/{rte_pmd_octeontx_event_version.map => version.map} (100%)
 rename drivers/event/octeontx2/{rte_pmd_octeontx2_event_version.map => version.map} (100%)
 rename drivers/event/opdl/{rte_pmd_opdl_event_version.map => version.map} (100%)
 rename drivers/event/skeleton/{rte_pmd_skeleton_event_version.map => version.map} (100%)
 rename drivers/event/sw/{rte_pmd_sw_event_version.map => version.map} (100%)
 rename drivers/mempool/bucket/{rte_mempool_bucket_version.map => version.map} (100%)
 rename drivers/mempool/dpaa/{rte_mempool_dpaa_version.map => version.map} (100%)
 rename drivers/mempool/dpaa2/{rte_mempool_dpaa2_version.map => version.map} (100%)
 rename drivers/mempool/octeontx/{rte_mempool_octeontx_version.map => version.map} (100%)
 rename drivers/mempool/octeontx2/{rte_mempool_octeontx2_version.map => version.map} (100%)
 rename drivers/mempool/ring/{rte_mempool_ring_version.map => version.map} (100%)
 rename drivers/mempool/stack/{rte_mempool_stack_version.map => version.map} (100%)
 rename drivers/net/af_packet/{rte_pmd_af_packet_version.map => version.map} (100%)
 rename drivers/net/af_xdp/{rte_pmd_af_xdp_version.map => version.map} (100%)
 rename drivers/net/ark/{rte_pmd_ark_version.map => version.map} (100%)
 rename drivers/net/atlantic/{rte_pmd_atlantic_version.map => version.map} (100%)
 rename drivers/net/avp/{rte_pmd_avp_version.map => version.map} (100%)
 rename drivers/net/axgbe/{rte_pmd_axgbe_version.map => version.map} (100%)
 rename drivers/net/bnx2x/{rte_pmd_bnx2x_version.map => version.map} (100%)
 rename drivers/net/bnxt/{rte_pmd_bnxt_version.map => version.map} (100%)
 rename drivers/net/bonding/{rte_pmd_bond_version.map => version.map} (100%)
 rename drivers/net/cxgbe/{rte_pmd_cxgbe_version.map => version.map} (100%)
 rename drivers/net/dpaa/{rte_pmd_dpaa_version.map => version.map} (100%)
 rename drivers/net/dpaa2/{rte_pmd_dpaa2_version.map => version.map} (100%)
 rename drivers/net/e1000/{rte_pmd_e1000_version.map => version.map} (100%)
 rename drivers/net/ena/{rte_pmd_ena_version.map => version.map} (100%)
 rename drivers/net/enetc/{rte_pmd_enetc_version.map => version.map} (100%)
 rename drivers/net/enic/{rte_pmd_enic_version.map => version.map} (100%)
 rename drivers/net/failsafe/{rte_pmd_failsafe_version.map => version.map} (100%)
 rename drivers/net/fm10k/{rte_pmd_fm10k_version.map => version.map} (100%)
 rename drivers/net/hinic/{rte_pmd_hinic_version.map => version.map} (100%)
 rename drivers/net/hns3/{rte_pmd_hns3_version.map => version.map} (100%)
 rename drivers/net/i40e/{rte_pmd_i40e_version.map => version.map} (100%)
 rename drivers/net/iavf/{rte_pmd_iavf_version.map => version.map} (100%)
 rename drivers/net/ice/{rte_pmd_ice_version.map => version.map} (100%)
 rename drivers/net/igc/{rte_pmd_igc_version.map => version.map} (100%)
 rename drivers/net/ionic/{rte_pmd_ionic_version.map => version.map} (100%)
 rename drivers/net/ipn3ke/{rte_pmd_ipn3ke_version.map => version.map} (100%)
 rename drivers/net/ixgbe/{rte_pmd_ixgbe_version.map => version.map} (100%)
 rename drivers/net/kni/{rte_pmd_kni_version.map => version.map} (100%)
 rename drivers/net/liquidio/{rte_pmd_liquidio_version.map => version.map} (100%)
 rename drivers/net/memif/{rte_pmd_memif_version.map => version.map} (100%)
 rename drivers/net/mlx4/{rte_pmd_mlx4_version.map => version.map} (100%)
 rename drivers/net/mlx5/{rte_pmd_mlx5_version.map => version.map} (100%)
 rename drivers/net/mvneta/{rte_pmd_mvneta_version.map => version.map} (100%)
 rename drivers/net/mvpp2/{rte_pmd_mvpp2_version.map => version.map} (100%)
 rename drivers/net/netvsc/{rte_pmd_netvsc_version.map => version.map} (100%)
 rename drivers/net/nfb/{rte_pmd_nfb_version.map => version.map} (100%)
 rename drivers/net/nfp/{rte_pmd_nfp_version.map => version.map} (100%)
 rename drivers/net/null/{rte_pmd_null_version.map => version.map} (100%)
 rename drivers/net/octeontx/{rte_pmd_octeontx_version.map => version.map} (100%)
 rename drivers/net/octeontx2/{rte_pmd_octeontx2_version.map => version.map} (100%)
 rename drivers/net/pcap/{rte_pmd_pcap_version.map => version.map} (100%)
 rename drivers/net/pfe/{rte_pmd_pfe_version.map => version.map} (100%)
 rename drivers/net/qede/{rte_pmd_qede_version.map => version.map} (100%)
 rename drivers/net/ring/{rte_pmd_ring_version.map => version.map} (100%)
 rename drivers/net/sfc/{rte_pmd_sfc_version.map => version.map} (100%)
 rename drivers/net/softnic/{rte_pmd_softnic_version.map => version.map} (100%)
 rename drivers/net/szedata2/{rte_pmd_szedata2_version.map => version.map} (100%)
 rename drivers/net/tap/{rte_pmd_tap_version.map => version.map} (100%)
 rename drivers/net/thunderx/{rte_pmd_thunderx_version.map => version.map} (100%)
 rename drivers/net/vdev_netvsc/{rte_pmd_vdev_netvsc_version.map => version.map} (100%)
 rename drivers/net/vhost/{rte_pmd_vhost_version.map => version.map} (100%)
 rename drivers/net/virtio/{rte_pmd_virtio_version.map => version.map} (100%)
 rename drivers/net/vmxnet3/{rte_pmd_vmxnet3_version.map => version.map} (100%)
 rename drivers/raw/dpaa2_cmdif/{rte_rawdev_dpaa2_cmdif_version.map => version.map} (100%)
 rename drivers/raw/dpaa2_qdma/{rte_rawdev_dpaa2_qdma_version.map => version.map} (100%)
 rename drivers/raw/ifpga/{rte_rawdev_ifpga_version.map => version.map} (100%)
 rename drivers/raw/ioat/{rte_rawdev_ioat_version.map => version.map} (100%)
 rename drivers/raw/ntb/{rte_rawdev_ntb_version.map => version.map} (100%)
 rename drivers/raw/octeontx2_dma/{rte_rawdev_octeontx2_dma_version.map => version.map} (100%)
 rename drivers/raw/octeontx2_ep/{rte_rawdev_octeontx2_ep_version.map => version.map} (100%)
 rename drivers/raw/skeleton/{rte_rawdev_skeleton_version.map => version.map} (100%)
 rename drivers/regex/mlx5/{rte_pmd_mlx5_regex_version.map => version.map} (100%)
 rename drivers/regex/octeontx2/{rte_pmd_octeontx2_regex_version.map => version.map} (100%)
 rename drivers/vdpa/ifc/{rte_pmd_ifc_version.map => version.map} (100%)
 rename drivers/vdpa/mlx5/{rte_pmd_mlx5_vdpa_version.map => version.map} (100%)
 rename lib/librte_acl/{rte_acl_version.map => version.map} (100%)
 rename lib/librte_bbdev/{rte_bbdev_version.map => version.map} (100%)
 rename lib/librte_bitratestats/{rte_bitratestats_version.map => version.map} (100%)
 rename lib/librte_bpf/{rte_bpf_version.map => version.map} (100%)
 rename lib/librte_cfgfile/{rte_cfgfile_version.map => version.map} (100%)
 rename lib/librte_cmdline/{rte_cmdline_version.map => version.map} (100%)
 rename lib/librte_compressdev/{rte_compressdev_version.map => version.map} (100%)
 rename lib/librte_cryptodev/{rte_cryptodev_version.map => version.map} (100%)
 rename lib/librte_distributor/{rte_distributor_version.map => version.map} (100%)
 rename lib/librte_eal/{rte_eal_version.map => version.map} (100%)
 rename lib/librte_efd/{rte_efd_version.map => version.map} (100%)
 rename lib/librte_ethdev/{rte_ethdev_version.map => version.map} (100%)
 rename lib/librte_eventdev/{rte_eventdev_version.map => version.map} (100%)
 rename lib/librte_fib/{rte_fib_version.map => version.map} (100%)
 rename lib/librte_flow_classify/{rte_flow_classify_version.map => version.map} (100%)
 rename lib/librte_graph/{rte_graph_version.map => version.map} (100%)
 rename lib/librte_gro/{rte_gro_version.map => version.map} (100%)
 rename lib/librte_gso/{rte_gso_version.map => version.map} (100%)
 rename lib/librte_hash/{rte_hash_version.map => version.map} (100%)
 rename lib/librte_ip_frag/{rte_ip_frag_version.map => version.map} (100%)
 rename lib/librte_ipsec/{rte_ipsec_version.map => version.map} (100%)
 rename lib/librte_jobstats/{rte_jobstats_version.map => version.map} (100%)
 rename lib/librte_kni/{rte_kni_version.map => version.map} (100%)
 rename lib/librte_kvargs/{rte_kvargs_version.map => version.map} (100%)
 rename lib/librte_latencystats/{rte_latencystats_version.map => version.map} (100%)
 rename lib/librte_lpm/{rte_lpm_version.map => version.map} (100%)
 rename lib/librte_mbuf/{rte_mbuf_version.map => version.map} (100%)
 rename lib/librte_member/{rte_member_version.map => version.map} (100%)
 rename lib/librte_mempool/{rte_mempool_version.map => version.map} (100%)
 rename lib/librte_meter/{rte_meter_version.map => version.map} (100%)
 rename lib/librte_metrics/{rte_metrics_version.map => version.map} (100%)
 rename lib/librte_net/{rte_net_version.map => version.map} (100%)
 rename lib/librte_node/{rte_node_version.map => version.map} (100%)
 rename lib/librte_pci/{rte_pci_version.map => version.map} (100%)
 rename lib/librte_pdump/{rte_pdump_version.map => version.map} (100%)
 rename lib/librte_pipeline/{rte_pipeline_version.map => version.map} (100%)
 rename lib/librte_port/{rte_port_version.map => version.map} (100%)
 rename lib/librte_power/{rte_power_version.map => version.map} (100%)
 rename lib/librte_rawdev/{rte_rawdev_version.map => version.map} (100%)
 rename lib/librte_rcu/{rte_rcu_version.map => version.map} (100%)
 rename lib/librte_regexdev/{rte_regexdev_version.map => version.map} (100%)
 rename lib/librte_reorder/{rte_reorder_version.map => version.map} (100%)
 rename lib/librte_rib/{rte_rib_version.map => version.map} (100%)
 rename lib/librte_ring/{rte_ring_version.map => version.map} (100%)
 rename lib/librte_sched/{rte_sched_version.map => version.map} (100%)
 rename lib/librte_security/{rte_security_version.map => version.map} (100%)
 rename lib/librte_stack/{rte_stack_version.map => version.map} (100%)
 rename lib/librte_table/{rte_table_version.map => version.map} (100%)
 rename lib/librte_telemetry/{rte_telemetry_version.map => version.map} (100%)
 rename lib/librte_timer/{rte_timer_version.map => version.map} (100%)
 rename lib/librte_vhost/{rte_vhost_version.map => version.map} (100%)
Signature · 1 line
2.25.1
#26 lore raw

PATCH v3 1/7 app: fix missing dependencies

A number of lib and driver dependencies for various apps were missed on build because the proper macro names for their use were mismatched between meson and make build systems. Before adding in equivalent compatibility macros we need to ensure to add the proper dependencies to ensure a valid build.

Fixes 16ade738fd0d ("app/testpmd: build with meson")
Fixes b5dc795a8a55 ("test: build app with meson as dpdk-test")
Fixes 996ef1176111 ("app: add all remaining apps to meson build")
---
 app/test-crypto-perf/meson.build |  3 +++
 app/test-pmd/meson.build         | 12 ++++++++++++
 2 files changed, 15 insertions(+)
app/test-crypto-perf/meson.build +3 -0
index f394b75ba..4bd71510d 100644
@@ -12,3 +12,6 @@ sources = files('cperf_ops.c',
 		'cperf_test_verify.c',
 		'main.c')
 deps += ['cryptodev', 'net', 'security']
+if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER')
+	deps += 'pmd_crypto_scheduler'
+endif
app/test-pmd/meson.build +12 -0
index f52ab148f..0d9e45049 100644
@@ -31,6 +31,18 @@ endif
 if dpdk_conf.has('RTE_LIBRTE_PDUMP')
 	deps += 'pdump'
 endif
+if dpdk_conf.has('RTE_LIBRTE_BITRATESTATS')
+	deps += 'bitratestats'
+endif
+if dpdk_conf.has('RTE_LIBRTE_LATENCYSTATS')
+	deps += 'latencystats'
+endif
+if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER')
+	deps += 'pmd_crypto_scheduler'
+endif
+if dpdk_conf.has('RTE_LIBRTE_BOND_PMD')
+	deps += 'pmd_bond'
+endif
 if dpdk_conf.has('RTE_LIBRTE_BNXT_PMD')
 	deps += 'pmd_bnxt'
 endif
Signature · 1 line
2.25.1
Acked-by on v3 1/7
#27 lore raw

Re: [dpdk-dev] [PATCH v3 1/7] app: fix missing dependencies

Quoted 11 lines · Bruce Richardson

A number of lib and driver dependencies for various apps were missed on build because the proper macro names for their use were mismatched between meson and make build systems. Before adding in equivalent compatibility macros we need to ensure to add the proper dependencies to ensure a valid build.

Fixes 16ade738fd0d ("app/testpmd: build with meson")
Fixes b5dc795a8a55 ("test: build app with meson as dpdk-test")
Fixes 996ef1176111 ("app: add all remaining apps to meson build")
Quoted 5 lines
---
 app/test-crypto-perf/meson.build |  3 +++
 app/test-pmd/meson.build         | 12 ++++++++++++
 2 files changed, 15 insertions(+)
Signature · 2 lines
Kind regards,
Luca Boccassi
#28 lore raw

PATCH v3 2/7 examples/l2fwd-crypto: fix missing dependency

In reply to Bruce Richardson

When the crypto-scheduler support is enabled, we were missing the dependency on it as part of the meson build.

Fixes 89f0711f9ddf ("examples: build some samples with meson")
---
 examples/l2fwd-crypto/meson.build | 3 +++
 1 file changed, 3 insertions(+)
examples/l2fwd-crypto/meson.build +3 -0
index 6c852ad19..39e1604fa 100644
@@ -7,6 +7,9 @@
 # DPDK instance, use 'make'
 
 deps += 'cryptodev'
+if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER')
+	deps += 'pmd_crypto_scheduler'
+endif
 allow_experimental_apis = true
 sources = files(
 	'main.c'
Signature · 1 line
2.25.1
Acked-by on v3 2/7
#29 lore raw

Re: [dpdk-dev] [PATCH v3 2/7] examples/l2fwd-crypto: fix missing dependency

Quoted 10 lines · Bruce Richardson

When the crypto-scheduler support is enabled, we were missing the dependency on it as part of the meson build.

Fixes 89f0711f9ddf ("examples: build some samples with meson")
---
 examples/l2fwd-crypto/meson.build | 3 +++
 1 file changed, 3 insertions(+)
Signature · 2 lines
Kind regards,
Luca Boccassi
#30 lore raw

PATCH v3 3/7 build: add defines for compatibility with make build

In reply to Bruce Richardson

The defines used to indicate what crypto, compression and eventdev drivers were being built were different to those used in the make build, with meson defining them with "_PMD" at the end, while make defined them with "_PMD" in the middle and the specific driver name at the end. This might cause compatibility issues for applications which used the older defines, which switching to build against new DPDK releases.

As well as changing the default to match that of make, meson also special-cases the crypto/compression/event drivers to have both defines provided. This ensures compatibility for these macros with both meson and make from older versions.

For a selection of other libraries and drivers, there were other incompatibilities between the meson and make-defined macros which were not previously highlighted in a deprecation notice, so we add per-macro compatibility defines for these to ease the transition from make to meson.

Fixes 5b9656b157d3 ("lib: build with meson")
Fixes 9314afb68a53 ("drivers: add infrastructure for meson build")
Fixes dcadbbde8e61 ("crypto/null: build with meson")
Fixes 3c32e89f68e1 ("compress/isal: add skeleton ISA-L compression PMD")
Fixes eca504f318db ("drivers/event: build skeleton and SW drivers with meson")
---
 app/test/meson.build               |   1 +
 config/meson.build                 |   3 +-
 config/rte_compatibility_defines.h | 129 +++++++++++++++++++++++++++++
 config/rte_config.h                |   1 +
 drivers/compress/meson.build       |   2 +-
 drivers/crypto/meson.build         |   2 +-
 drivers/event/meson.build          |   2 +-
 drivers/meson.build                |  15 ++++
 8 files changed, 151 insertions(+), 4 deletions(-)
 create mode 100644 config/rte_compatibility_defines.h
app/test/meson.build +1 -0
index dedf29dd7..fc90a1909 100644
@@ -415,6 +415,7 @@ endif
 
 if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER')
 	driver_test_names += 'cryptodev_scheduler_autotest'
+	test_deps += 'pmd_crypto_scheduler'
 endif
 
 foreach d:test_deps
config/meson.build +2 -1
index d0e593226..89bffc85a 100644
@@ -253,7 +253,8 @@ dpdk_conf.set('RTE_COMPILE_TIME_CPUFLAGS', ','.join(compile_time_cpuflags))
 # set the install path for the drivers
 dpdk_conf.set_quoted('RTE_EAL_PMD_PATH', eal_pmd_path)
 
-install_headers('rte_config.h', subdir: get_option('include_subdir_arch'))
+install_headers(['rte_config.h', 'rte_compatibility_defines.h'],
+		subdir: get_option('include_subdir_arch'))
 
 # enable VFIO only if it is linux OS
 dpdk_conf.set('RTE_EAL_VFIO', is_linux)
config/rte_compatibility_defines.h new file +129 -0

129 lines not on this page · raw message

config/rte_config.h +1 -0
index 03d90d78b..1bebab335 100644
@@ -13,6 +13,7 @@
 #define _RTE_CONFIG_H_
 
 #include <rte_build_config.h>
+#include <rte_compatibility_defines.h>
 
 /* legacy defines */
 #ifdef RTE_EXEC_ENV_LINUX
drivers/compress/meson.build +1 -1
index ee883c3f9..bea1720a0 100644
@@ -8,5 +8,5 @@ endif
 drivers = ['isal', 'octeontx', 'qat', 'zlib']
 
 std_deps = ['compressdev'] # compressdev pulls in all other needed deps
-config_flag_fmt = 'RTE_LIBRTE_@0@_PMD'
+config_flag_fmt = 'RTE_LIBRTE_PMD_@0@'
 driver_name_fmt = 'rte_pmd_@0@'
drivers/crypto/meson.build +1 -1
index a2423507a..25b99c19c 100644
@@ -26,5 +26,5 @@ drivers = ['aesni_gcm',
 	   'zuc']
 
 std_deps = ['cryptodev'] # cryptodev pulls in all other needed deps
-config_flag_fmt = 'RTE_LIBRTE_@0@_PMD'
+config_flag_fmt = 'RTE_LIBRTE_PMD_@0@'
 driver_name_fmt = 'rte_pmd_@0@'
drivers/event/meson.build +1 -1
index ebe76a75c..f2a343147 100644
@@ -11,5 +11,5 @@ if not (toolchain == 'gcc' and cc.version().version_compare('<4.8.6') and
 	drivers += 'octeontx'
 endif
 std_deps = ['eventdev', 'kvargs']
-config_flag_fmt = 'RTE_LIBRTE_@0@_EVENTDEV_PMD'
+config_flag_fmt = 'RTE_LIBRTE_PMD_@0@_EVENTDEV'
 driver_name_fmt = 'rte_pmd_@0@_event'
drivers/meson.build +15 -0
index 5f9526557..b5ac483d3 100644
@@ -117,6 +117,21 @@ foreach subpath:subdirs
 				fmt_name = name
 			endif
 			dpdk_conf.set(config_flag_fmt.format(fmt_name.to_upper()),1)
+			# for driver compatibility, since we changed the
+			# default to match that of make. Remove in future release
+			# after following deprecation process
+			if config_flag_fmt.contains('_PMD_@0@') and (class == 'crypto'
+					or class == 'compress'
+					or class == 'event')
+				alt_flag_fmt = '_@0@_PMD'.join(
+						config_flag_fmt.split('_PMD_@0@'))
+				if config_flag_fmt.contains('EVENTDEV')
+					alt_flag_fmt = '_@0@_EVENTDEV_PMD'.join(
+						config_flag_fmt.split('_PMD_@0@_EVENTDEV'))
+				endif
+				dpdk_conf.set(alt_flag_fmt.format(
+						fmt_name.to_upper()), 1)
+			endif
 			lib_name = driver_name_fmt.format(fmt_name)
 
 			dpdk_extra_ldflags += pkgconfig_extra_libs
Signature · 1 line
2.25.1
Acked-by on v3 3/7
#31 lore raw

Re: [dpdk-dev] [PATCH v3 3/7] build: add defines for compatibility with make build

Quoted 43 lines · Bruce Richardson

The defines used to indicate what crypto, compression and eventdev drivers were being built were different to those used in the make build, with meson defining them with "_PMD" at the end, while make defined them with "_PMD" in the middle and the specific driver name at the end. This might cause compatibility issues for applications which used the older defines, which switching to build against new DPDK releases.

As well as changing the default to match that of make, meson also special-cases the crypto/compression/event drivers to have both defines provided. This ensures compatibility for these macros with both meson and make from older versions.

For a selection of other libraries and drivers, there were other incompatibilities between the meson and make-defined macros which were not previously highlighted in a deprecation notice, so we add per-macro compatibility defines for these to ease the transition from make to meson.

Fixes 5b9656b157d3 ("lib: build with meson")
Fixes 9314afb68a53 ("drivers: add infrastructure for meson build")
Fixes dcadbbde8e61 ("crypto/null: build with meson")
Fixes 3c32e89f68e1 ("compress/isal: add skeleton ISA-L compression PMD")
Fixes eca504f318db ("drivers/event: build skeleton and SW drivers with meson")
---
 app/test/meson.build               |   1 +
 config/meson.build                 |   3 +-
 config/rte_compatibility_defines.h | 129 +++++++++++++++++++++++++++++
 config/rte_config.h                |   1 +
 drivers/compress/meson.build       |   2 +-
 drivers/crypto/meson.build         |   2 +-
 drivers/event/meson.build          |   2 +-
 drivers/meson.build                |  15 ++++
 8 files changed, 151 insertions(+), 4 deletions(-)
 create mode 100644 config/rte_compatibility_defines.h
app/test/meson.build +0 -0
index dedf29dd7..fc90a1909 100644

app/test/meson.build endif · line 421

Quoted 7 lines
app/test/meson.build +1 -0
@@ -415,6 +415,7 @@ endif
 
 if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER')
 	driver_test_names += 'cryptodev_scheduler_autotest'
+	test_deps += 'pmd_crypto_scheduler'
 endif
 
 foreach d:test_deps

This change looks out of place in this patch? Was it supposed to be part of one of the previous commits maybe?

Other than that,

Signature · 2 lines
Kind regards,
Luca Boccassi
#32 lore raw

Re: [dpdk-dev] [PATCH v3 3/7] build: add defines for compatibility with make build

Quoted 50 lines · Luca Boccassi
Quoted 49 lines · Bruce Richardson

The defines used to indicate what crypto, compression and eventdev drivers were being built were different to those used in the make build, with meson defining them with "_PMD" at the end, while make defined them with "_PMD" in the middle and the specific driver name at the end. This might cause compatibility issues for applications which used the older defines, which switching to build against new DPDK releases.

As well as changing the default to match that of make, meson also special-cases the crypto/compression/event drivers to have both defines provided. This ensures compatibility for these macros with both meson and make from older versions.

For a selection of other libraries and drivers, there were other incompatibilities between the meson and make-defined macros which were not previously highlighted in a deprecation notice, so we add per-macro compatibility defines for these to ease the transition from make to meson.

Fixes 5b9656b157d3 ("lib: build with meson")
Fixes 9314afb68a53 ("drivers: add infrastructure for meson build")
Fixes dcadbbde8e61 ("crypto/null: build with meson")
Fixes 3c32e89f68e1 ("compress/isal: add skeleton ISA-L compression PMD")
Fixes eca504f318db ("drivers/event: build skeleton and SW drivers with meson")
---
 app/test/meson.build               |   1 +
 config/meson.build                 |   3 +-
 config/rte_compatibility_defines.h | 129 +++++++++++++++++++++++++++++
 config/rte_config.h                |   1 +
 drivers/compress/meson.build       |   2 +-
 drivers/crypto/meson.build         |   2 +-
 drivers/event/meson.build          |   2 +-
 drivers/meson.build                |  15 ++++
 8 files changed, 151 insertions(+), 4 deletions(-)
 create mode 100644 config/rte_compatibility_defines.h
app/test/meson.build +1 -0
index dedf29dd7..fc90a1909 100644
@@ -415,6 +415,7 @@ endif
 
 if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER')
 	driver_test_names += 'cryptodev_scheduler_autotest'
+	test_deps += 'pmd_crypto_scheduler'
 endif
 
Quoted 9 lines

app/test/meson.build endif · line 421

Quoted 1 line
app/test/meson.build +0 -0
 foreach d:test_deps

This change looks out of place in this patch? Was it supposed to be part of one of the previous commits maybe?

Other than that,

Yes, it looks like it probably should be. I'll investigate and do a v5 (since I had v4 already done before I saw this comment!)

/Bruce

#33 lore raw

PATCH v3 4/7 qat: build from common folder

In reply to Bruce Richardson

Since the drivers in the common directory can be processed out of order, in this case following the "bus" directory, we can simplify somewhat the build of the QAT driver to be done entirely from the "common/qat" folder rather than having it's build distributed across 3 folders.

This also opens up the possibility of building the QAT driver with crypto only and the compression part disabled. It further allows more sensible naming of the resulting shared library in case of standardizing library names based on device class; i.e. common_qat is more descriptive for a combined crypto/compression driver than either of the other two prefixes individually.

---
 drivers/common/meson.build                    |  2 +-
 drivers/common/qat/meson.build                | 69 ++++++++++++++++---
 .../qat/rte_common_qat_version.map}           |  0
 drivers/compress/meson.build                  |  2 +-
 drivers/compress/qat/meson.build              | 17 -----
 drivers/crypto/meson.build                    |  1 -
 drivers/crypto/qat/meson.build                | 23 -------
 drivers/meson.build                           |  1 +
 8 files changed, 63 insertions(+), 52 deletions(-)
 rename drivers/{compress/qat/rte_pmd_qat_version.map => common/qat/rte_common_qat_version.map} (100%)
 delete mode 100644 drivers/compress/qat/meson.build
 delete mode 100644 drivers/crypto/qat/meson.build
drivers/common/meson.build +1 -1
index 7ac1ca73a..abb4f1529 100644
@@ -6,6 +6,6 @@ if is_windows
 endif
 
 std_deps = ['eal']
-drivers = ['cpt', 'dpaax', 'iavf', 'mvep', 'octeontx', 'octeontx2', 'qat', 'sfc_efx']
+drivers = ['cpt', 'dpaax', 'iavf', 'mvep', 'octeontx', 'octeontx2', 'sfc_efx']
 config_flag_fmt = 'RTE_LIBRTE_@0@_COMMON'
 driver_name_fmt = 'rte_common_@0@'
drivers/common/qat/meson.build +60 -9

75 lines not on this page · raw message

drivers/common/qat/rte_common_qat_version.map renamed from drivers/compress/qat/rte_pmd_qat_version.map +0 -0
similarity index 100%
rename from drivers/compress/qat/rte_pmd_qat_version.map
rename to drivers/common/qat/rte_common_qat_version.map
drivers/compress/meson.build +1 -1
index bea1720a0..3a4723c0c 100644
@@ -5,7 +5,7 @@ if is_windows
 	subdir_done()
 endif
 
-drivers = ['isal', 'octeontx', 'qat', 'zlib']
+drivers = ['isal', 'octeontx', 'zlib']
 
 std_deps = ['compressdev'] # compressdev pulls in all other needed deps
 config_flag_fmt = 'RTE_LIBRTE_PMD_@0@'
drivers/compress/qat/meson.build deleted +0 -17
deleted file mode 100644
index a00246980..000000000
@@ -1,17 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2017-2018 Intel Corporation
-
-
-# Add our sources files to the list
-qat_sources += files('qat_comp_pmd.c',
-		     'qat_comp.c')
-qat_includes += include_directories('.')
-qat_deps += 'compressdev'
-qat_ext_deps += dep
-
-# build the whole driver
-sources += qat_sources
-cflags += qat_cflags
-deps += qat_deps
-ext_deps += qat_ext_deps
-includes += qat_includes
drivers/crypto/meson.build +0 -1
index 25b99c19c..bd7a940e6 100644
@@ -19,7 +19,6 @@ drivers = ['aesni_gcm',
 	   'octeontx',
 	   'octeontx2',
 	   'openssl',
-	   'qat',
 	   'scheduler',
 	   'snow3g',
 	   'virtio',
drivers/crypto/qat/meson.build deleted +0 -23
deleted file mode 100644
index a225f374a..000000000
@@ -1,23 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2017-2018 Intel Corporation
-
-# this does not build the QAT driver, instead that is done in the compression
-# driver which comes later. Here we just add our sources files to the list
-build = false
-reason = '' # sentinal value to suppress printout
-dep = dependency('libcrypto', required: false)
-qat_includes += include_directories('.')
-qat_deps += 'cryptodev'
-qat_deps += 'net'
-qat_deps += 'security'
-if dep.found()
-	# Add our sources files to the list
-	qat_sources += files('qat_sym_pmd.c',
-			     'qat_sym.c',
-			     'qat_sym_session.c',
-			     'qat_asym_pmd.c',
-			     'qat_asym.c')
-	qat_ext_deps += dep
-	qat_cflags += '-DBUILD_QAT_SYM'
-	qat_cflags += '-DBUILD_QAT_ASYM'
-endif
drivers/meson.build +1 -0
index b5ac483d3..b95b00583 100644
@@ -6,6 +6,7 @@ subdirs = [
 	'common',
 	'bus',
 	'common/mlx5', # depends on bus.
+	'common/qat', # depends on bus.
 	'mempool', # depends on common and bus.
 	'net',     # depends on common, bus, mempool
 	'raw',     # depends on common, bus and net.
Signature · 1 line
2.25.1
Acked-by on v3 4/7
#34 lore raw

Re: [dpdk-dev] [PATCH v3 4/7] qat: build from common folder

Quoted 13 lines · Bruce Richardson

Since the drivers in the common directory can be processed out of order, in this case following the "bus" directory, we can simplify somewhat the build of the QAT driver to be done entirely from the "common/qat" folder rather than having it's build distributed across 3 folders.

This also opens up the possibility of building the QAT driver with crypto only and the compression part disabled. It further allows more sensible naming of the resulting shared library in case of standardizing library names based on device class; i.e. common_qat is more descriptive for a combined crypto/compression driver than either of the other two prefixes individually.

Quoted 13 lines
---
 drivers/common/meson.build                    |  2 +-
 drivers/common/qat/meson.build                | 69 ++++++++++++++++---
 .../qat/rte_common_qat_version.map}           |  0
 drivers/compress/meson.build                  |  2 +-
 drivers/compress/qat/meson.build              | 17 -----
 drivers/crypto/meson.build                    |  1 -
 drivers/crypto/qat/meson.build                | 23 -------
 drivers/meson.build                           |  1 +
 8 files changed, 63 insertions(+), 52 deletions(-)
 rename drivers/{compress/qat/rte_pmd_qat_version.map => common/qat/rte_common_qat_version.map} (100%)
 delete mode 100644 drivers/compress/qat/meson.build
 delete mode 100644 drivers/crypto/qat/meson.build
Signature · 2 lines
Kind regards,
Luca Boccassi
#35 lore raw

PATCH v3 5/7 build: remove library name from version map filename

In reply to Bruce Richardson

Since each version map file is contained in the subdirectory of the library it refers to, there is no need to include the library name in the filename. This makes things simpler in case of library renaming.

---
 .../{rte_pmd_bbdev_fpga_5gnr_fec_version.map => version.map}  | 0
 .../{rte_pmd_bbdev_fpga_lte_fec_version.map => version.map}   | 0
 .../null/{rte_pmd_bbdev_null_version.map => version.map}      | 0
 .../{rte_pmd_bbdev_turbo_sw_version.map => version.map}       | 0
 drivers/bus/dpaa/{rte_bus_dpaa_version.map => version.map}    | 0
 drivers/bus/fslmc/{rte_bus_fslmc_version.map => version.map}  | 0
 drivers/bus/ifpga/{rte_bus_ifpga_version.map => version.map}  | 0
 drivers/bus/pci/{rte_bus_pci_version.map => version.map}      | 0
 drivers/bus/vdev/{rte_bus_vdev_version.map => version.map}    | 0
 drivers/bus/vmbus/{rte_bus_vmbus_version.map => version.map}  | 0
 .../common/cpt/{rte_common_cpt_version.map => version.map}    | 0
 .../dpaax/{rte_common_dpaax_version.map => version.map}       | 0
 .../common/iavf/{rte_common_iavf_version.map => version.map}  | 0
 .../common/mlx5/{rte_common_mlx5_version.map => version.map}  | 0
 .../common/mvep/{rte_common_mvep_version.map => version.map}  | 0
 .../octeontx/{rte_common_octeontx_version.map => version.map} | 0
 .../{rte_common_octeontx2_version.map => version.map}         | 0
 .../common/qat/{rte_common_qat_version.map => version.map}    | 0
 .../sfc_efx/{rte_common_sfc_efx_version.map => version.map}   | 0
 .../compress/isal/{rte_pmd_isal_version.map => version.map}   | 0
 .../{rte_pmd_octeontx_compress_version.map => version.map}    | 0
 .../compress/zlib/{rte_pmd_zlib_version.map => version.map}   | 0
 .../aesni_gcm/{rte_pmd_aesni_gcm_version.map => version.map}  | 0
 .../aesni_mb/{rte_pmd_aesni_mb_version.map => version.map}    | 0
 .../crypto/armv8/{rte_pmd_armv8_version.map => version.map}   | 0
 .../caam_jr/{rte_pmd_caam_jr_version.map => version.map}      | 0
 drivers/crypto/ccp/{rte_pmd_ccp_version.map => version.map}   | 0
 .../dpaa2_sec/{rte_pmd_dpaa2_sec_version.map => version.map}  | 0
 .../dpaa_sec/{rte_pmd_dpaa_sec_version.map => version.map}    | 0
 .../crypto/kasumi/{rte_pmd_kasumi_version.map => version.map} | 0
 .../crypto/mvsam/{rte_pmd_mvsam_version.map => version.map}   | 0
 .../crypto/nitrox/{rte_pmd_nitrox_version.map => version.map} | 0
 .../null/{rte_pmd_null_crypto_version.map => version.map}     | 0
 .../{rte_pmd_octeontx_crypto_version.map => version.map}      | 0
 .../{rte_pmd_octeontx2_crypto_version.map => version.map}     | 0
 .../openssl/{rte_pmd_openssl_version.map => version.map}      | 0
 .../{rte_pmd_crypto_scheduler_version.map => version.map}     | 0
 .../crypto/snow3g/{rte_pmd_snow3g_version.map => version.map} | 0
 .../virtio/{rte_pmd_virtio_crypto_version.map => version.map} | 0
 drivers/crypto/zuc/{rte_pmd_zuc_version.map => version.map}   | 0
 .../dpaa/{rte_pmd_dpaa_event_version.map => version.map}      | 0
 .../dpaa2/{rte_pmd_dpaa2_event_version.map => version.map}    | 0
 .../event/dsw/{rte_pmd_dsw_event_version.map => version.map}  | 0
 .../{rte_pmd_octeontx_event_version.map => version.map}       | 0
 .../{rte_pmd_octeontx2_event_version.map => version.map}      | 0
 .../opdl/{rte_pmd_opdl_event_version.map => version.map}      | 0
 .../{rte_pmd_skeleton_event_version.map => version.map}       | 0
 .../event/sw/{rte_pmd_sw_event_version.map => version.map}    | 0
 .../bucket/{rte_mempool_bucket_version.map => version.map}    | 0
 .../dpaa/{rte_mempool_dpaa_version.map => version.map}        | 0
 .../dpaa2/{rte_mempool_dpaa2_version.map => version.map}      | 0
 .../{rte_mempool_octeontx_version.map => version.map}         | 0
 .../{rte_mempool_octeontx2_version.map => version.map}        | 0
 .../ring/{rte_mempool_ring_version.map => version.map}        | 0
 .../stack/{rte_mempool_stack_version.map => version.map}      | 0
 drivers/meson.build                                           | 4 ++--
 .../af_packet/{rte_pmd_af_packet_version.map => version.map}  | 0
 .../net/af_xdp/{rte_pmd_af_xdp_version.map => version.map}    | 0
 drivers/net/ark/{rte_pmd_ark_version.map => version.map}      | 0
 .../atlantic/{rte_pmd_atlantic_version.map => version.map}    | 0
 drivers/net/avp/{rte_pmd_avp_version.map => version.map}      | 0
 drivers/net/axgbe/{rte_pmd_axgbe_version.map => version.map}  | 0
 drivers/net/bnx2x/{rte_pmd_bnx2x_version.map => version.map}  | 0
 drivers/net/bnxt/{rte_pmd_bnxt_version.map => version.map}    | 0
 drivers/net/bonding/{rte_pmd_bond_version.map => version.map} | 0
 drivers/net/cxgbe/{rte_pmd_cxgbe_version.map => version.map}  | 0
 drivers/net/dpaa/{rte_pmd_dpaa_version.map => version.map}    | 0
 drivers/net/dpaa2/{rte_pmd_dpaa2_version.map => version.map}  | 0
 drivers/net/e1000/{rte_pmd_e1000_version.map => version.map}  | 0
 drivers/net/ena/{rte_pmd_ena_version.map => version.map}      | 0
 drivers/net/enetc/{rte_pmd_enetc_version.map => version.map}  | 0
 drivers/net/enic/{rte_pmd_enic_version.map => version.map}    | 0
 .../failsafe/{rte_pmd_failsafe_version.map => version.map}    | 0
 drivers/net/fm10k/{rte_pmd_fm10k_version.map => version.map}  | 0
 drivers/net/hinic/{rte_pmd_hinic_version.map => version.map}  | 0
 drivers/net/hns3/{rte_pmd_hns3_version.map => version.map}    | 0
 drivers/net/i40e/{rte_pmd_i40e_version.map => version.map}    | 0
 drivers/net/iavf/{rte_pmd_iavf_version.map => version.map}    | 0
 drivers/net/ice/{rte_pmd_ice_version.map => version.map}      | 0
 drivers/net/igc/{rte_pmd_igc_version.map => version.map}      | 0
 drivers/net/ionic/{rte_pmd_ionic_version.map => version.map}  | 0
 .../net/ipn3ke/{rte_pmd_ipn3ke_version.map => version.map}    | 0
 drivers/net/ixgbe/{rte_pmd_ixgbe_version.map => version.map}  | 0
 drivers/net/kni/{rte_pmd_kni_version.map => version.map}      | 0
 .../liquidio/{rte_pmd_liquidio_version.map => version.map}    | 0
 drivers/net/memif/{rte_pmd_memif_version.map => version.map}  | 0
 drivers/net/mlx4/{rte_pmd_mlx4_version.map => version.map}    | 0
 drivers/net/mlx5/{rte_pmd_mlx5_version.map => version.map}    | 0
 .../net/mvneta/{rte_pmd_mvneta_version.map => version.map}    | 0
 drivers/net/mvpp2/{rte_pmd_mvpp2_version.map => version.map}  | 0
 .../net/netvsc/{rte_pmd_netvsc_version.map => version.map}    | 0
 drivers/net/nfb/{rte_pmd_nfb_version.map => version.map}      | 0
 drivers/net/nfp/{rte_pmd_nfp_version.map => version.map}      | 0
 drivers/net/null/{rte_pmd_null_version.map => version.map}    | 0
 .../octeontx/{rte_pmd_octeontx_version.map => version.map}    | 0
 .../octeontx2/{rte_pmd_octeontx2_version.map => version.map}  | 0
 drivers/net/pcap/{rte_pmd_pcap_version.map => version.map}    | 0
 drivers/net/pfe/{rte_pmd_pfe_version.map => version.map}      | 0
 drivers/net/qede/{rte_pmd_qede_version.map => version.map}    | 0
 drivers/net/ring/{rte_pmd_ring_version.map => version.map}    | 0
 drivers/net/sfc/{rte_pmd_sfc_version.map => version.map}      | 0
 .../net/softnic/{rte_pmd_softnic_version.map => version.map}  | 0
 .../szedata2/{rte_pmd_szedata2_version.map => version.map}    | 0
 drivers/net/tap/{rte_pmd_tap_version.map => version.map}      | 0
 .../thunderx/{rte_pmd_thunderx_version.map => version.map}    | 0
 .../{rte_pmd_vdev_netvsc_version.map => version.map}          | 0
 drivers/net/vhost/{rte_pmd_vhost_version.map => version.map}  | 0
 .../net/virtio/{rte_pmd_virtio_version.map => version.map}    | 0
 .../net/vmxnet3/{rte_pmd_vmxnet3_version.map => version.map}  | 0
 .../{rte_rawdev_dpaa2_cmdif_version.map => version.map}       | 0
 .../{rte_rawdev_dpaa2_qdma_version.map => version.map}        | 0
 .../raw/ifpga/{rte_rawdev_ifpga_version.map => version.map}   | 0
 drivers/raw/ioat/{rte_rawdev_ioat_version.map => version.map} | 0
 drivers/raw/ntb/{rte_rawdev_ntb_version.map => version.map}   | 0
 .../{rte_rawdev_octeontx2_dma_version.map => version.map}     | 0
 .../{rte_rawdev_octeontx2_ep_version.map => version.map}      | 0
 .../skeleton/{rte_rawdev_skeleton_version.map => version.map} | 0
 .../mlx5/{rte_pmd_mlx5_regex_version.map => version.map}      | 0
 .../{rte_pmd_octeontx2_regex_version.map => version.map}      | 0
 drivers/vdpa/ifc/{rte_pmd_ifc_version.map => version.map}     | 0
 .../vdpa/mlx5/{rte_pmd_mlx5_vdpa_version.map => version.map}  | 0
 lib/librte_acl/{rte_acl_version.map => version.map}           | 0
 lib/librte_bbdev/{rte_bbdev_version.map => version.map}       | 0
 .../{rte_bitratestats_version.map => version.map}             | 0
 lib/librte_bpf/{rte_bpf_version.map => version.map}           | 0
 lib/librte_cfgfile/{rte_cfgfile_version.map => version.map}   | 0
 lib/librte_cmdline/{rte_cmdline_version.map => version.map}   | 0
 .../{rte_compressdev_version.map => version.map}              | 0
 .../{rte_cryptodev_version.map => version.map}                | 0
 .../{rte_distributor_version.map => version.map}              | 0
 lib/librte_eal/{rte_eal_version.map => version.map}           | 0
 lib/librte_efd/{rte_efd_version.map => version.map}           | 0
 lib/librte_ethdev/{rte_ethdev_version.map => version.map}     | 0
 lib/librte_eventdev/{rte_eventdev_version.map => version.map} | 0
 lib/librte_fib/{rte_fib_version.map => version.map}           | 0
 .../{rte_flow_classify_version.map => version.map}            | 0
 lib/librte_graph/{rte_graph_version.map => version.map}       | 0
 lib/librte_gro/{rte_gro_version.map => version.map}           | 0
 lib/librte_gso/{rte_gso_version.map => version.map}           | 0
 lib/librte_hash/{rte_hash_version.map => version.map}         | 0
 lib/librte_ip_frag/{rte_ip_frag_version.map => version.map}   | 0
 lib/librte_ipsec/{rte_ipsec_version.map => version.map}       | 0
 lib/librte_jobstats/{rte_jobstats_version.map => version.map} | 0
 lib/librte_kni/{rte_kni_version.map => version.map}           | 0
 lib/librte_kvargs/{rte_kvargs_version.map => version.map}     | 0
 .../{rte_latencystats_version.map => version.map}             | 0
 lib/librte_lpm/{rte_lpm_version.map => version.map}           | 0
 lib/librte_mbuf/{rte_mbuf_version.map => version.map}         | 0
 lib/librte_member/{rte_member_version.map => version.map}     | 0
 lib/librte_mempool/{rte_mempool_version.map => version.map}   | 0
 lib/librte_meter/{rte_meter_version.map => version.map}       | 0
 lib/librte_metrics/{rte_metrics_version.map => version.map}   | 0
 lib/librte_net/{rte_net_version.map => version.map}           | 0
 lib/librte_node/{rte_node_version.map => version.map}         | 0
 lib/librte_pci/{rte_pci_version.map => version.map}           | 0
 lib/librte_pdump/{rte_pdump_version.map => version.map}       | 0
 lib/librte_pipeline/{rte_pipeline_version.map => version.map} | 0
 lib/librte_port/{rte_port_version.map => version.map}         | 0
 lib/librte_power/{rte_power_version.map => version.map}       | 0
 lib/librte_rawdev/{rte_rawdev_version.map => version.map}     | 0
 lib/librte_rcu/{rte_rcu_version.map => version.map}           | 0
 lib/librte_regexdev/{rte_regexdev_version.map => version.map} | 0
 lib/librte_reorder/{rte_reorder_version.map => version.map}   | 0
 lib/librte_rib/{rte_rib_version.map => version.map}           | 0
 lib/librte_ring/{rte_ring_version.map => version.map}         | 0
 lib/librte_sched/{rte_sched_version.map => version.map}       | 0
 lib/librte_security/{rte_security_version.map => version.map} | 0
 lib/librte_stack/{rte_stack_version.map => version.map}       | 0
 lib/librte_table/{rte_table_version.map => version.map}       | 0
 .../{rte_telemetry_version.map => version.map}                | 0
 lib/librte_timer/{rte_timer_version.map => version.map}       | 0
 lib/librte_vhost/{rte_vhost_version.map => version.map}       | 0
 lib/meson.build                                               | 4 ++--
 173 files changed, 4 insertions(+), 4 deletions(-)
 rename drivers/baseband/fpga_5gnr_fec/{rte_pmd_bbdev_fpga_5gnr_fec_version.map => version.map} (100%)
 rename drivers/baseband/fpga_lte_fec/{rte_pmd_bbdev_fpga_lte_fec_version.map => version.map} (100%)
 rename drivers/baseband/null/{rte_pmd_bbdev_null_version.map => version.map} (100%)
 rename drivers/baseband/turbo_sw/{rte_pmd_bbdev_turbo_sw_version.map => version.map} (100%)
 rename drivers/bus/dpaa/{rte_bus_dpaa_version.map => version.map} (100%)
 rename drivers/bus/fslmc/{rte_bus_fslmc_version.map => version.map} (100%)
 rename drivers/bus/ifpga/{rte_bus_ifpga_version.map => version.map} (100%)
 rename drivers/bus/pci/{rte_bus_pci_version.map => version.map} (100%)
 rename drivers/bus/vdev/{rte_bus_vdev_version.map => version.map} (100%)
 rename drivers/bus/vmbus/{rte_bus_vmbus_version.map => version.map} (100%)
 rename drivers/common/cpt/{rte_common_cpt_version.map => version.map} (100%)
 rename drivers/common/dpaax/{rte_common_dpaax_version.map => version.map} (100%)
 rename drivers/common/iavf/{rte_common_iavf_version.map => version.map} (100%)
 rename drivers/common/mlx5/{rte_common_mlx5_version.map => version.map} (100%)
 rename drivers/common/mvep/{rte_common_mvep_version.map => version.map} (100%)
 rename drivers/common/octeontx/{rte_common_octeontx_version.map => version.map} (100%)
 rename drivers/common/octeontx2/{rte_common_octeontx2_version.map => version.map} (100%)
 rename drivers/common/qat/{rte_common_qat_version.map => version.map} (100%)
 rename drivers/common/sfc_efx/{rte_common_sfc_efx_version.map => version.map} (100%)
 rename drivers/compress/isal/{rte_pmd_isal_version.map => version.map} (100%)
 rename drivers/compress/octeontx/{rte_pmd_octeontx_compress_version.map => version.map} (100%)
 rename drivers/compress/zlib/{rte_pmd_zlib_version.map => version.map} (100%)
 rename drivers/crypto/aesni_gcm/{rte_pmd_aesni_gcm_version.map => version.map} (100%)
 rename drivers/crypto/aesni_mb/{rte_pmd_aesni_mb_version.map => version.map} (100%)
 rename drivers/crypto/armv8/{rte_pmd_armv8_version.map => version.map} (100%)
 rename drivers/crypto/caam_jr/{rte_pmd_caam_jr_version.map => version.map} (100%)
 rename drivers/crypto/ccp/{rte_pmd_ccp_version.map => version.map} (100%)
 rename drivers/crypto/dpaa2_sec/{rte_pmd_dpaa2_sec_version.map => version.map} (100%)
 rename drivers/crypto/dpaa_sec/{rte_pmd_dpaa_sec_version.map => version.map} (100%)
 rename drivers/crypto/kasumi/{rte_pmd_kasumi_version.map => version.map} (100%)
 rename drivers/crypto/mvsam/{rte_pmd_mvsam_version.map => version.map} (100%)
 rename drivers/crypto/nitrox/{rte_pmd_nitrox_version.map => version.map} (100%)
 rename drivers/crypto/null/{rte_pmd_null_crypto_version.map => version.map} (100%)
 rename drivers/crypto/octeontx/{rte_pmd_octeontx_crypto_version.map => version.map} (100%)
 rename drivers/crypto/octeontx2/{rte_pmd_octeontx2_crypto_version.map => version.map} (100%)
 rename drivers/crypto/openssl/{rte_pmd_openssl_version.map => version.map} (100%)
 rename drivers/crypto/scheduler/{rte_pmd_crypto_scheduler_version.map => version.map} (100%)
 rename drivers/crypto/snow3g/{rte_pmd_snow3g_version.map => version.map} (100%)
 rename drivers/crypto/virtio/{rte_pmd_virtio_crypto_version.map => version.map} (100%)
 rename drivers/crypto/zuc/{rte_pmd_zuc_version.map => version.map} (100%)
 rename drivers/event/dpaa/{rte_pmd_dpaa_event_version.map => version.map} (100%)
 rename drivers/event/dpaa2/{rte_pmd_dpaa2_event_version.map => version.map} (100%)
 rename drivers/event/dsw/{rte_pmd_dsw_event_version.map => version.map} (100%)
 rename drivers/event/octeontx/{rte_pmd_octeontx_event_version.map => version.map} (100%)
 rename drivers/event/octeontx2/{rte_pmd_octeontx2_event_version.map => version.map} (100%)
 rename drivers/event/opdl/{rte_pmd_opdl_event_version.map => version.map} (100%)
 rename drivers/event/skeleton/{rte_pmd_skeleton_event_version.map => version.map} (100%)
 rename drivers/event/sw/{rte_pmd_sw_event_version.map => version.map} (100%)
 rename drivers/mempool/bucket/{rte_mempool_bucket_version.map => version.map} (100%)
 rename drivers/mempool/dpaa/{rte_mempool_dpaa_version.map => version.map} (100%)
 rename drivers/mempool/dpaa2/{rte_mempool_dpaa2_version.map => version.map} (100%)
 rename drivers/mempool/octeontx/{rte_mempool_octeontx_version.map => version.map} (100%)
 rename drivers/mempool/octeontx2/{rte_mempool_octeontx2_version.map => version.map} (100%)
 rename drivers/mempool/ring/{rte_mempool_ring_version.map => version.map} (100%)
 rename drivers/mempool/stack/{rte_mempool_stack_version.map => version.map} (100%)
 rename drivers/net/af_packet/{rte_pmd_af_packet_version.map => version.map} (100%)
 rename drivers/net/af_xdp/{rte_pmd_af_xdp_version.map => version.map} (100%)
 rename drivers/net/ark/{rte_pmd_ark_version.map => version.map} (100%)
 rename drivers/net/atlantic/{rte_pmd_atlantic_version.map => version.map} (100%)
 rename drivers/net/avp/{rte_pmd_avp_version.map => version.map} (100%)
 rename drivers/net/axgbe/{rte_pmd_axgbe_version.map => version.map} (100%)
 rename drivers/net/bnx2x/{rte_pmd_bnx2x_version.map => version.map} (100%)
 rename drivers/net/bnxt/{rte_pmd_bnxt_version.map => version.map} (100%)
 rename drivers/net/bonding/{rte_pmd_bond_version.map => version.map} (100%)
 rename drivers/net/cxgbe/{rte_pmd_cxgbe_version.map => version.map} (100%)
 rename drivers/net/dpaa/{rte_pmd_dpaa_version.map => version.map} (100%)
 rename drivers/net/dpaa2/{rte_pmd_dpaa2_version.map => version.map} (100%)
 rename drivers/net/e1000/{rte_pmd_e1000_version.map => version.map} (100%)
 rename drivers/net/ena/{rte_pmd_ena_version.map => version.map} (100%)
 rename drivers/net/enetc/{rte_pmd_enetc_version.map => version.map} (100%)
 rename drivers/net/enic/{rte_pmd_enic_version.map => version.map} (100%)
 rename drivers/net/failsafe/{rte_pmd_failsafe_version.map => version.map} (100%)
 rename drivers/net/fm10k/{rte_pmd_fm10k_version.map => version.map} (100%)
 rename drivers/net/hinic/{rte_pmd_hinic_version.map => version.map} (100%)
 rename drivers/net/hns3/{rte_pmd_hns3_version.map => version.map} (100%)
 rename drivers/net/i40e/{rte_pmd_i40e_version.map => version.map} (100%)
 rename drivers/net/iavf/{rte_pmd_iavf_version.map => version.map} (100%)
 rename drivers/net/ice/{rte_pmd_ice_version.map => version.map} (100%)
 rename drivers/net/igc/{rte_pmd_igc_version.map => version.map} (100%)
 rename drivers/net/ionic/{rte_pmd_ionic_version.map => version.map} (100%)
 rename drivers/net/ipn3ke/{rte_pmd_ipn3ke_version.map => version.map} (100%)
 rename drivers/net/ixgbe/{rte_pmd_ixgbe_version.map => version.map} (100%)
 rename drivers/net/kni/{rte_pmd_kni_version.map => version.map} (100%)
 rename drivers/net/liquidio/{rte_pmd_liquidio_version.map => version.map} (100%)
 rename drivers/net/memif/{rte_pmd_memif_version.map => version.map} (100%)
 rename drivers/net/mlx4/{rte_pmd_mlx4_version.map => version.map} (100%)
 rename drivers/net/mlx5/{rte_pmd_mlx5_version.map => version.map} (100%)
 rename drivers/net/mvneta/{rte_pmd_mvneta_version.map => version.map} (100%)
 rename drivers/net/mvpp2/{rte_pmd_mvpp2_version.map => version.map} (100%)
 rename drivers/net/netvsc/{rte_pmd_netvsc_version.map => version.map} (100%)
 rename drivers/net/nfb/{rte_pmd_nfb_version.map => version.map} (100%)
 rename drivers/net/nfp/{rte_pmd_nfp_version.map => version.map} (100%)
 rename drivers/net/null/{rte_pmd_null_version.map => version.map} (100%)
 rename drivers/net/octeontx/{rte_pmd_octeontx_version.map => version.map} (100%)
 rename drivers/net/octeontx2/{rte_pmd_octeontx2_version.map => version.map} (100%)
 rename drivers/net/pcap/{rte_pmd_pcap_version.map => version.map} (100%)
 rename drivers/net/pfe/{rte_pmd_pfe_version.map => version.map} (100%)
 rename drivers/net/qede/{rte_pmd_qede_version.map => version.map} (100%)
 rename drivers/net/ring/{rte_pmd_ring_version.map => version.map} (100%)
 rename drivers/net/sfc/{rte_pmd_sfc_version.map => version.map} (100%)
 rename drivers/net/softnic/{rte_pmd_softnic_version.map => version.map} (100%)
 rename drivers/net/szedata2/{rte_pmd_szedata2_version.map => version.map} (100%)
 rename drivers/net/tap/{rte_pmd_tap_version.map => version.map} (100%)
 rename drivers/net/thunderx/{rte_pmd_thunderx_version.map => version.map} (100%)
 rename drivers/net/vdev_netvsc/{rte_pmd_vdev_netvsc_version.map => version.map} (100%)
 rename drivers/net/vhost/{rte_pmd_vhost_version.map => version.map} (100%)
 rename drivers/net/virtio/{rte_pmd_virtio_version.map => version.map} (100%)
 rename drivers/net/vmxnet3/{rte_pmd_vmxnet3_version.map => version.map} (100%)
 rename drivers/raw/dpaa2_cmdif/{rte_rawdev_dpaa2_cmdif_version.map => version.map} (100%)
 rename drivers/raw/dpaa2_qdma/{rte_rawdev_dpaa2_qdma_version.map => version.map} (100%)
 rename drivers/raw/ifpga/{rte_rawdev_ifpga_version.map => version.map} (100%)
 rename drivers/raw/ioat/{rte_rawdev_ioat_version.map => version.map} (100%)
 rename drivers/raw/ntb/{rte_rawdev_ntb_version.map => version.map} (100%)
 rename drivers/raw/octeontx2_dma/{rte_rawdev_octeontx2_dma_version.map => version.map} (100%)
 rename drivers/raw/octeontx2_ep/{rte_rawdev_octeontx2_ep_version.map => version.map} (100%)
 rename drivers/raw/skeleton/{rte_rawdev_skeleton_version.map => version.map} (100%)
 rename drivers/regex/mlx5/{rte_pmd_mlx5_regex_version.map => version.map} (100%)
 rename drivers/regex/octeontx2/{rte_pmd_octeontx2_regex_version.map => version.map} (100%)
 rename drivers/vdpa/ifc/{rte_pmd_ifc_version.map => version.map} (100%)
 rename drivers/vdpa/mlx5/{rte_pmd_mlx5_vdpa_version.map => version.map} (100%)
 rename lib/librte_acl/{rte_acl_version.map => version.map} (100%)
 rename lib/librte_bbdev/{rte_bbdev_version.map => version.map} (100%)
 rename lib/librte_bitratestats/{rte_bitratestats_version.map => version.map} (100%)
 rename lib/librte_bpf/{rte_bpf_version.map => version.map} (100%)
 rename lib/librte_cfgfile/{rte_cfgfile_version.map => version.map} (100%)
 rename lib/librte_cmdline/{rte_cmdline_version.map => version.map} (100%)
 rename lib/librte_compressdev/{rte_compressdev_version.map => version.map} (100%)
 rename lib/librte_cryptodev/{rte_cryptodev_version.map => version.map} (100%)
 rename lib/librte_distributor/{rte_distributor_version.map => version.map} (100%)
 rename lib/librte_eal/{rte_eal_version.map => version.map} (100%)
 rename lib/librte_efd/{rte_efd_version.map => version.map} (100%)
 rename lib/librte_ethdev/{rte_ethdev_version.map => version.map} (100%)
 rename lib/librte_eventdev/{rte_eventdev_version.map => version.map} (100%)
 rename lib/librte_fib/{rte_fib_version.map => version.map} (100%)
 rename lib/librte_flow_classify/{rte_flow_classify_version.map => version.map} (100%)
 rename lib/librte_graph/{rte_graph_version.map => version.map} (100%)
 rename lib/librte_gro/{rte_gro_version.map => version.map} (100%)
 rename lib/librte_gso/{rte_gso_version.map => version.map} (100%)
 rename lib/librte_hash/{rte_hash_version.map => version.map} (100%)
 rename lib/librte_ip_frag/{rte_ip_frag_version.map => version.map} (100%)
 rename lib/librte_ipsec/{rte_ipsec_version.map => version.map} (100%)
 rename lib/librte_jobstats/{rte_jobstats_version.map => version.map} (100%)
 rename lib/librte_kni/{rte_kni_version.map => version.map} (100%)
 rename lib/librte_kvargs/{rte_kvargs_version.map => version.map} (100%)
 rename lib/librte_latencystats/{rte_latencystats_version.map => version.map} (100%)
 rename lib/librte_lpm/{rte_lpm_version.map => version.map} (100%)
 rename lib/librte_mbuf/{rte_mbuf_version.map => version.map} (100%)
 rename lib/librte_member/{rte_member_version.map => version.map} (100%)
 rename lib/librte_mempool/{rte_mempool_version.map => version.map} (100%)
 rename lib/librte_meter/{rte_meter_version.map => version.map} (100%)
 rename lib/librte_metrics/{rte_metrics_version.map => version.map} (100%)
 rename lib/librte_net/{rte_net_version.map => version.map} (100%)
 rename lib/librte_node/{rte_node_version.map => version.map} (100%)
 rename lib/librte_pci/{rte_pci_version.map => version.map} (100%)
 rename lib/librte_pdump/{rte_pdump_version.map => version.map} (100%)
 rename lib/librte_pipeline/{rte_pipeline_version.map => version.map} (100%)
 rename lib/librte_port/{rte_port_version.map => version.map} (100%)
 rename lib/librte_power/{rte_power_version.map => version.map} (100%)
 rename lib/librte_rawdev/{rte_rawdev_version.map => version.map} (100%)
 rename lib/librte_rcu/{rte_rcu_version.map => version.map} (100%)
 rename lib/librte_regexdev/{rte_regexdev_version.map => version.map} (100%)
 rename lib/librte_reorder/{rte_reorder_version.map => version.map} (100%)
 rename lib/librte_rib/{rte_rib_version.map => version.map} (100%)
 rename lib/librte_ring/{rte_ring_version.map => version.map} (100%)
 rename lib/librte_sched/{rte_sched_version.map => version.map} (100%)
 rename lib/librte_security/{rte_security_version.map => version.map} (100%)
 rename lib/librte_stack/{rte_stack_version.map => version.map} (100%)
 rename lib/librte_table/{rte_table_version.map => version.map} (100%)
 rename lib/librte_telemetry/{rte_telemetry_version.map => version.map} (100%)
 rename lib/librte_timer/{rte_timer_version.map => version.map} (100%)
 rename lib/librte_vhost/{rte_vhost_version.map => version.map} (100%)
drivers/baseband/fpga_5gnr_fec/version.map renamed from drivers/baseband/fpga_5gnr_fec/rte_pmd_bbdev_fpga_5gnr_fec_version.map +0 -0
similarity index 100%
rename from drivers/baseband/fpga_5gnr_fec/rte_pmd_bbdev_fpga_5gnr_fec_version.map
rename to drivers/baseband/fpga_5gnr_fec/version.map
drivers/baseband/fpga_lte_fec/version.map renamed from drivers/baseband/fpga_lte_fec/rte_pmd_bbdev_fpga_lte_fec_version.map +0 -0
similarity index 100%
rename from drivers/baseband/fpga_lte_fec/rte_pmd_bbdev_fpga_lte_fec_version.map
rename to drivers/baseband/fpga_lte_fec/version.map
drivers/baseband/null/version.map renamed from drivers/baseband/null/rte_pmd_bbdev_null_version.map +0 -0
similarity index 100%
rename from drivers/baseband/null/rte_pmd_bbdev_null_version.map
rename to drivers/baseband/null/version.map
drivers/baseband/turbo_sw/version.map renamed from drivers/baseband/turbo_sw/rte_pmd_bbdev_turbo_sw_version.map +0 -0
similarity index 100%
rename from drivers/baseband/turbo_sw/rte_pmd_bbdev_turbo_sw_version.map
rename to drivers/baseband/turbo_sw/version.map
drivers/bus/dpaa/version.map renamed from drivers/bus/dpaa/rte_bus_dpaa_version.map +0 -0
similarity index 100%
rename from drivers/bus/dpaa/rte_bus_dpaa_version.map
rename to drivers/bus/dpaa/version.map
drivers/bus/fslmc/version.map renamed from drivers/bus/fslmc/rte_bus_fslmc_version.map +0 -0
similarity index 100%
rename from drivers/bus/fslmc/rte_bus_fslmc_version.map
rename to drivers/bus/fslmc/version.map
drivers/bus/ifpga/version.map renamed from drivers/bus/ifpga/rte_bus_ifpga_version.map +0 -0
similarity index 100%
rename from drivers/bus/ifpga/rte_bus_ifpga_version.map
rename to drivers/bus/ifpga/version.map
drivers/bus/pci/version.map renamed from drivers/bus/pci/rte_bus_pci_version.map +0 -0
similarity index 100%
rename from drivers/bus/pci/rte_bus_pci_version.map
rename to drivers/bus/pci/version.map
drivers/bus/vdev/version.map renamed from drivers/bus/vdev/rte_bus_vdev_version.map +0 -0
similarity index 100%
rename from drivers/bus/vdev/rte_bus_vdev_version.map
rename to drivers/bus/vdev/version.map
drivers/bus/vmbus/version.map renamed from drivers/bus/vmbus/rte_bus_vmbus_version.map +0 -0
similarity index 100%
rename from drivers/bus/vmbus/rte_bus_vmbus_version.map
rename to drivers/bus/vmbus/version.map
drivers/common/cpt/version.map renamed from drivers/common/cpt/rte_common_cpt_version.map +0 -0
similarity index 100%
rename from drivers/common/cpt/rte_common_cpt_version.map
rename to drivers/common/cpt/version.map
drivers/common/dpaax/version.map renamed from drivers/common/dpaax/rte_common_dpaax_version.map +0 -0
similarity index 100%
rename from drivers/common/dpaax/rte_common_dpaax_version.map
rename to drivers/common/dpaax/version.map
drivers/common/iavf/version.map renamed from drivers/common/iavf/rte_common_iavf_version.map +0 -0
similarity index 100%
rename from drivers/common/iavf/rte_common_iavf_version.map
rename to drivers/common/iavf/version.map
drivers/common/mlx5/version.map renamed from drivers/common/mlx5/rte_common_mlx5_version.map +0 -0
similarity index 100%
rename from drivers/common/mlx5/rte_common_mlx5_version.map
rename to drivers/common/mlx5/version.map
drivers/common/mvep/version.map renamed from drivers/common/mvep/rte_common_mvep_version.map +0 -0
similarity index 100%
rename from drivers/common/mvep/rte_common_mvep_version.map
rename to drivers/common/mvep/version.map
drivers/common/octeontx/version.map renamed from drivers/common/octeontx/rte_common_octeontx_version.map +0 -0
similarity index 100%
rename from drivers/common/octeontx/rte_common_octeontx_version.map
rename to drivers/common/octeontx/version.map
drivers/common/octeontx2/version.map renamed from drivers/common/octeontx2/rte_common_octeontx2_version.map +0 -0
similarity index 100%
rename from drivers/common/octeontx2/rte_common_octeontx2_version.map
rename to drivers/common/octeontx2/version.map
drivers/common/qat/version.map renamed from drivers/common/qat/rte_common_qat_version.map +0 -0
similarity index 100%
rename from drivers/common/qat/rte_common_qat_version.map
rename to drivers/common/qat/version.map
drivers/common/sfc_efx/version.map renamed from drivers/common/sfc_efx/rte_common_sfc_efx_version.map +0 -0
similarity index 100%
rename from drivers/common/sfc_efx/rte_common_sfc_efx_version.map
rename to drivers/common/sfc_efx/version.map
drivers/compress/isal/version.map renamed from drivers/compress/isal/rte_pmd_isal_version.map +0 -0
similarity index 100%
rename from drivers/compress/isal/rte_pmd_isal_version.map
rename to drivers/compress/isal/version.map
drivers/compress/octeontx/version.map renamed from drivers/compress/octeontx/rte_pmd_octeontx_compress_version.map +0 -0
similarity index 100%
rename from drivers/compress/octeontx/rte_pmd_octeontx_compress_version.map
rename to drivers/compress/octeontx/version.map
drivers/compress/zlib/version.map renamed from drivers/compress/zlib/rte_pmd_zlib_version.map +0 -0
similarity index 100%
rename from drivers/compress/zlib/rte_pmd_zlib_version.map
rename to drivers/compress/zlib/version.map
drivers/crypto/aesni_gcm/version.map renamed from drivers/crypto/aesni_gcm/rte_pmd_aesni_gcm_version.map +0 -0
similarity index 100%
rename from drivers/crypto/aesni_gcm/rte_pmd_aesni_gcm_version.map
rename to drivers/crypto/aesni_gcm/version.map
drivers/crypto/aesni_mb/version.map renamed from drivers/crypto/aesni_mb/rte_pmd_aesni_mb_version.map +0 -0
similarity index 100%
rename from drivers/crypto/aesni_mb/rte_pmd_aesni_mb_version.map
rename to drivers/crypto/aesni_mb/version.map
drivers/crypto/armv8/version.map renamed from drivers/crypto/armv8/rte_pmd_armv8_version.map +0 -0
similarity index 100%
rename from drivers/crypto/armv8/rte_pmd_armv8_version.map
rename to drivers/crypto/armv8/version.map
drivers/crypto/caam_jr/version.map renamed from drivers/crypto/caam_jr/rte_pmd_caam_jr_version.map +0 -0
similarity index 100%
rename from drivers/crypto/caam_jr/rte_pmd_caam_jr_version.map
rename to drivers/crypto/caam_jr/version.map
drivers/crypto/ccp/version.map renamed from drivers/crypto/ccp/rte_pmd_ccp_version.map +0 -0
similarity index 100%
rename from drivers/crypto/ccp/rte_pmd_ccp_version.map
rename to drivers/crypto/ccp/version.map
drivers/crypto/dpaa2_sec/version.map renamed from drivers/crypto/dpaa2_sec/rte_pmd_dpaa2_sec_version.map +0 -0
similarity index 100%
rename from drivers/crypto/dpaa2_sec/rte_pmd_dpaa2_sec_version.map
rename to drivers/crypto/dpaa2_sec/version.map
drivers/crypto/dpaa_sec/version.map renamed from drivers/crypto/dpaa_sec/rte_pmd_dpaa_sec_version.map +0 -0
similarity index 100%
rename from drivers/crypto/dpaa_sec/rte_pmd_dpaa_sec_version.map
rename to drivers/crypto/dpaa_sec/version.map
drivers/crypto/kasumi/version.map renamed from drivers/crypto/kasumi/rte_pmd_kasumi_version.map +0 -0
similarity index 100%
rename from drivers/crypto/kasumi/rte_pmd_kasumi_version.map
rename to drivers/crypto/kasumi/version.map
drivers/crypto/mvsam/version.map renamed from drivers/crypto/mvsam/rte_pmd_mvsam_version.map +0 -0
similarity index 100%
rename from drivers/crypto/mvsam/rte_pmd_mvsam_version.map
rename to drivers/crypto/mvsam/version.map
drivers/crypto/nitrox/version.map renamed from drivers/crypto/nitrox/rte_pmd_nitrox_version.map +0 -0
similarity index 100%
rename from drivers/crypto/nitrox/rte_pmd_nitrox_version.map
rename to drivers/crypto/nitrox/version.map
drivers/crypto/null/version.map renamed from drivers/crypto/null/rte_pmd_null_crypto_version.map +0 -0
similarity index 100%
rename from drivers/crypto/null/rte_pmd_null_crypto_version.map
rename to drivers/crypto/null/version.map
drivers/crypto/octeontx/version.map renamed from drivers/crypto/octeontx/rte_pmd_octeontx_crypto_version.map +0 -0
similarity index 100%
rename from drivers/crypto/octeontx/rte_pmd_octeontx_crypto_version.map
rename to drivers/crypto/octeontx/version.map
drivers/crypto/octeontx2/version.map renamed from drivers/crypto/octeontx2/rte_pmd_octeontx2_crypto_version.map +0 -0
similarity index 100%
rename from drivers/crypto/octeontx2/rte_pmd_octeontx2_crypto_version.map
rename to drivers/crypto/octeontx2/version.map
drivers/crypto/openssl/version.map renamed from drivers/crypto/openssl/rte_pmd_openssl_version.map +0 -0
similarity index 100%
rename from drivers/crypto/openssl/rte_pmd_openssl_version.map
rename to drivers/crypto/openssl/version.map
drivers/crypto/scheduler/version.map renamed from drivers/crypto/scheduler/rte_pmd_crypto_scheduler_version.map +0 -0
similarity index 100%
rename from drivers/crypto/scheduler/rte_pmd_crypto_scheduler_version.map
rename to drivers/crypto/scheduler/version.map
drivers/crypto/snow3g/version.map renamed from drivers/crypto/snow3g/rte_pmd_snow3g_version.map +0 -0
similarity index 100%
rename from drivers/crypto/snow3g/rte_pmd_snow3g_version.map
rename to drivers/crypto/snow3g/version.map
drivers/crypto/virtio/version.map renamed from drivers/crypto/virtio/rte_pmd_virtio_crypto_version.map +0 -0
similarity index 100%
rename from drivers/crypto/virtio/rte_pmd_virtio_crypto_version.map
rename to drivers/crypto/virtio/version.map
drivers/crypto/zuc/version.map renamed from drivers/crypto/zuc/rte_pmd_zuc_version.map +0 -0
similarity index 100%
rename from drivers/crypto/zuc/rte_pmd_zuc_version.map
rename to drivers/crypto/zuc/version.map
drivers/event/dpaa/version.map renamed from drivers/event/dpaa/rte_pmd_dpaa_event_version.map +0 -0
similarity index 100%
rename from drivers/event/dpaa/rte_pmd_dpaa_event_version.map
rename to drivers/event/dpaa/version.map
drivers/event/dpaa2/version.map renamed from drivers/event/dpaa2/rte_pmd_dpaa2_event_version.map +0 -0
similarity index 100%
rename from drivers/event/dpaa2/rte_pmd_dpaa2_event_version.map
rename to drivers/event/dpaa2/version.map
drivers/event/dsw/version.map renamed from drivers/event/dsw/rte_pmd_dsw_event_version.map +0 -0
similarity index 100%
rename from drivers/event/dsw/rte_pmd_dsw_event_version.map
rename to drivers/event/dsw/version.map
drivers/event/octeontx/version.map renamed from drivers/event/octeontx/rte_pmd_octeontx_event_version.map +0 -0
similarity index 100%
rename from drivers/event/octeontx/rte_pmd_octeontx_event_version.map
rename to drivers/event/octeontx/version.map
drivers/event/octeontx2/version.map renamed from drivers/event/octeontx2/rte_pmd_octeontx2_event_version.map +0 -0
similarity index 100%
rename from drivers/event/octeontx2/rte_pmd_octeontx2_event_version.map
rename to drivers/event/octeontx2/version.map
drivers/event/opdl/version.map renamed from drivers/event/opdl/rte_pmd_opdl_event_version.map +0 -0
similarity index 100%
rename from drivers/event/opdl/rte_pmd_opdl_event_version.map
rename to drivers/event/opdl/version.map
drivers/event/skeleton/version.map renamed from drivers/event/skeleton/rte_pmd_skeleton_event_version.map +0 -0
similarity index 100%
rename from drivers/event/skeleton/rte_pmd_skeleton_event_version.map
rename to drivers/event/skeleton/version.map
drivers/event/sw/version.map renamed from drivers/event/sw/rte_pmd_sw_event_version.map +0 -0
similarity index 100%
rename from drivers/event/sw/rte_pmd_sw_event_version.map
rename to drivers/event/sw/version.map
drivers/mempool/bucket/version.map renamed from drivers/mempool/bucket/rte_mempool_bucket_version.map +0 -0
similarity index 100%
rename from drivers/mempool/bucket/rte_mempool_bucket_version.map
rename to drivers/mempool/bucket/version.map
drivers/mempool/dpaa/version.map renamed from drivers/mempool/dpaa/rte_mempool_dpaa_version.map +0 -0
similarity index 100%
rename from drivers/mempool/dpaa/rte_mempool_dpaa_version.map
rename to drivers/mempool/dpaa/version.map
drivers/mempool/dpaa2/version.map renamed from drivers/mempool/dpaa2/rte_mempool_dpaa2_version.map +0 -0
similarity index 100%
rename from drivers/mempool/dpaa2/rte_mempool_dpaa2_version.map
rename to drivers/mempool/dpaa2/version.map
drivers/mempool/octeontx/version.map renamed from drivers/mempool/octeontx/rte_mempool_octeontx_version.map +0 -0
similarity index 100%
rename from drivers/mempool/octeontx/rte_mempool_octeontx_version.map
rename to drivers/mempool/octeontx/version.map
drivers/mempool/octeontx2/version.map renamed from drivers/mempool/octeontx2/rte_mempool_octeontx2_version.map +0 -0
similarity index 100%
rename from drivers/mempool/octeontx2/rte_mempool_octeontx2_version.map
rename to drivers/mempool/octeontx2/version.map
drivers/mempool/ring/version.map renamed from drivers/mempool/ring/rte_mempool_ring_version.map +0 -0
similarity index 100%
rename from drivers/mempool/ring/rte_mempool_ring_version.map
rename to drivers/mempool/ring/version.map
drivers/mempool/stack/version.map renamed from drivers/mempool/stack/rte_mempool_stack_version.map +0 -0
similarity index 100%
rename from drivers/mempool/stack/rte_mempool_stack_version.map
rename to drivers/mempool/stack/version.map
drivers/meson.build +2 -2
index b95b00583..3d4bbff13 100644
@@ -166,9 +166,9 @@ foreach subpath:subdirs
 				install: true)
 
 			# now build the shared driver
-			version_map = '@0@/@1@/@2@_version.map'.format(
+			version_map = '@0@/@1@/version.map'.format(
 					meson.current_source_dir(),
-					drv_path, lib_name)
+					drv_path)
 			implib = 'lib' + lib_name + '.dll.a'
 
 			def_file = custom_target(lib_name + '_def',
drivers/net/af_packet/version.map renamed from drivers/net/af_packet/rte_pmd_af_packet_version.map +0 -0
similarity index 100%
rename from drivers/net/af_packet/rte_pmd_af_packet_version.map
rename to drivers/net/af_packet/version.map
drivers/net/af_xdp/version.map renamed from drivers/net/af_xdp/rte_pmd_af_xdp_version.map +0 -0
similarity index 100%
rename from drivers/net/af_xdp/rte_pmd_af_xdp_version.map
rename to drivers/net/af_xdp/version.map
drivers/net/ark/version.map renamed from drivers/net/ark/rte_pmd_ark_version.map +0 -0
similarity index 100%
rename from drivers/net/ark/rte_pmd_ark_version.map
rename to drivers/net/ark/version.map
drivers/net/atlantic/version.map renamed from drivers/net/atlantic/rte_pmd_atlantic_version.map +0 -0
similarity index 100%
rename from drivers/net/atlantic/rte_pmd_atlantic_version.map
rename to drivers/net/atlantic/version.map
drivers/net/avp/version.map renamed from drivers/net/avp/rte_pmd_avp_version.map +0 -0
similarity index 100%
rename from drivers/net/avp/rte_pmd_avp_version.map
rename to drivers/net/avp/version.map
drivers/net/axgbe/version.map renamed from drivers/net/axgbe/rte_pmd_axgbe_version.map +0 -0
similarity index 100%
rename from drivers/net/axgbe/rte_pmd_axgbe_version.map
rename to drivers/net/axgbe/version.map
drivers/net/bnx2x/version.map renamed from drivers/net/bnx2x/rte_pmd_bnx2x_version.map +0 -0
similarity index 100%
rename from drivers/net/bnx2x/rte_pmd_bnx2x_version.map
rename to drivers/net/bnx2x/version.map
drivers/net/bnxt/version.map renamed from drivers/net/bnxt/rte_pmd_bnxt_version.map +0 -0
similarity index 100%
rename from drivers/net/bnxt/rte_pmd_bnxt_version.map
rename to drivers/net/bnxt/version.map
drivers/net/bonding/version.map renamed from drivers/net/bonding/rte_pmd_bond_version.map +0 -0
similarity index 100%
rename from drivers/net/bonding/rte_pmd_bond_version.map
rename to drivers/net/bonding/version.map
drivers/net/cxgbe/version.map renamed from drivers/net/cxgbe/rte_pmd_cxgbe_version.map +0 -0
similarity index 100%
rename from drivers/net/cxgbe/rte_pmd_cxgbe_version.map
rename to drivers/net/cxgbe/version.map
drivers/net/dpaa/version.map renamed from drivers/net/dpaa/rte_pmd_dpaa_version.map +0 -0
similarity index 100%
rename from drivers/net/dpaa/rte_pmd_dpaa_version.map
rename to drivers/net/dpaa/version.map
drivers/net/dpaa2/version.map renamed from drivers/net/dpaa2/rte_pmd_dpaa2_version.map +0 -0
similarity index 100%
rename from drivers/net/dpaa2/rte_pmd_dpaa2_version.map
rename to drivers/net/dpaa2/version.map
drivers/net/e1000/version.map renamed from drivers/net/e1000/rte_pmd_e1000_version.map +0 -0
similarity index 100%
rename from drivers/net/e1000/rte_pmd_e1000_version.map
rename to drivers/net/e1000/version.map
drivers/net/ena/version.map renamed from drivers/net/ena/rte_pmd_ena_version.map +0 -0
similarity index 100%
rename from drivers/net/ena/rte_pmd_ena_version.map
rename to drivers/net/ena/version.map
drivers/net/enetc/version.map renamed from drivers/net/enetc/rte_pmd_enetc_version.map +0 -0
similarity index 100%
rename from drivers/net/enetc/rte_pmd_enetc_version.map
rename to drivers/net/enetc/version.map
drivers/net/enic/version.map renamed from drivers/net/enic/rte_pmd_enic_version.map +0 -0
similarity index 100%
rename from drivers/net/enic/rte_pmd_enic_version.map
rename to drivers/net/enic/version.map
drivers/net/failsafe/version.map renamed from drivers/net/failsafe/rte_pmd_failsafe_version.map +0 -0
similarity index 100%
rename from drivers/net/failsafe/rte_pmd_failsafe_version.map
rename to drivers/net/failsafe/version.map
drivers/net/fm10k/version.map renamed from drivers/net/fm10k/rte_pmd_fm10k_version.map +0 -0
similarity index 100%
rename from drivers/net/fm10k/rte_pmd_fm10k_version.map
rename to drivers/net/fm10k/version.map
drivers/net/hinic/version.map renamed from drivers/net/hinic/rte_pmd_hinic_version.map +0 -0
similarity index 100%
rename from drivers/net/hinic/rte_pmd_hinic_version.map
rename to drivers/net/hinic/version.map
drivers/net/hns3/version.map renamed from drivers/net/hns3/rte_pmd_hns3_version.map +0 -0
similarity index 100%
rename from drivers/net/hns3/rte_pmd_hns3_version.map
rename to drivers/net/hns3/version.map
drivers/net/i40e/version.map renamed from drivers/net/i40e/rte_pmd_i40e_version.map +0 -0
similarity index 100%
rename from drivers/net/i40e/rte_pmd_i40e_version.map
rename to drivers/net/i40e/version.map
drivers/net/iavf/version.map renamed from drivers/net/iavf/rte_pmd_iavf_version.map +0 -0
similarity index 100%
rename from drivers/net/iavf/rte_pmd_iavf_version.map
rename to drivers/net/iavf/version.map
drivers/net/ice/version.map renamed from drivers/net/ice/rte_pmd_ice_version.map +0 -0
similarity index 100%
rename from drivers/net/ice/rte_pmd_ice_version.map
rename to drivers/net/ice/version.map
drivers/net/igc/version.map renamed from drivers/net/igc/rte_pmd_igc_version.map +0 -0
similarity index 100%
rename from drivers/net/igc/rte_pmd_igc_version.map
rename to drivers/net/igc/version.map
drivers/net/ionic/version.map renamed from drivers/net/ionic/rte_pmd_ionic_version.map +0 -0
similarity index 100%
rename from drivers/net/ionic/rte_pmd_ionic_version.map
rename to drivers/net/ionic/version.map
drivers/net/ipn3ke/version.map renamed from drivers/net/ipn3ke/rte_pmd_ipn3ke_version.map +0 -0
similarity index 100%
rename from drivers/net/ipn3ke/rte_pmd_ipn3ke_version.map
rename to drivers/net/ipn3ke/version.map
drivers/net/ixgbe/version.map renamed from drivers/net/ixgbe/rte_pmd_ixgbe_version.map +0 -0
similarity index 100%
rename from drivers/net/ixgbe/rte_pmd_ixgbe_version.map
rename to drivers/net/ixgbe/version.map
drivers/net/kni/version.map renamed from drivers/net/kni/rte_pmd_kni_version.map +0 -0
similarity index 100%
rename from drivers/net/kni/rte_pmd_kni_version.map
rename to drivers/net/kni/version.map
drivers/net/liquidio/version.map renamed from drivers/net/liquidio/rte_pmd_liquidio_version.map +0 -0
similarity index 100%
rename from drivers/net/liquidio/rte_pmd_liquidio_version.map
rename to drivers/net/liquidio/version.map
drivers/net/memif/version.map renamed from drivers/net/memif/rte_pmd_memif_version.map +0 -0
similarity index 100%
rename from drivers/net/memif/rte_pmd_memif_version.map
rename to drivers/net/memif/version.map
drivers/net/mlx4/version.map renamed from drivers/net/mlx4/rte_pmd_mlx4_version.map +0 -0
similarity index 100%
rename from drivers/net/mlx4/rte_pmd_mlx4_version.map
rename to drivers/net/mlx4/version.map
drivers/net/mlx5/version.map renamed from drivers/net/mlx5/rte_pmd_mlx5_version.map +0 -0
similarity index 100%
rename from drivers/net/mlx5/rte_pmd_mlx5_version.map
rename to drivers/net/mlx5/version.map
drivers/net/mvneta/version.map renamed from drivers/net/mvneta/rte_pmd_mvneta_version.map +0 -0
similarity index 100%
rename from drivers/net/mvneta/rte_pmd_mvneta_version.map
rename to drivers/net/mvneta/version.map
drivers/net/mvpp2/version.map renamed from drivers/net/mvpp2/rte_pmd_mvpp2_version.map +0 -0
similarity index 100%
rename from drivers/net/mvpp2/rte_pmd_mvpp2_version.map
rename to drivers/net/mvpp2/version.map
drivers/net/netvsc/version.map renamed from drivers/net/netvsc/rte_pmd_netvsc_version.map +0 -0
similarity index 100%
rename from drivers/net/netvsc/rte_pmd_netvsc_version.map
rename to drivers/net/netvsc/version.map
drivers/net/nfb/version.map renamed from drivers/net/nfb/rte_pmd_nfb_version.map +0 -0
similarity index 100%
rename from drivers/net/nfb/rte_pmd_nfb_version.map
rename to drivers/net/nfb/version.map
drivers/net/nfp/version.map renamed from drivers/net/nfp/rte_pmd_nfp_version.map +0 -0
similarity index 100%
rename from drivers/net/nfp/rte_pmd_nfp_version.map
rename to drivers/net/nfp/version.map
drivers/net/null/version.map renamed from drivers/net/null/rte_pmd_null_version.map +0 -0
similarity index 100%
rename from drivers/net/null/rte_pmd_null_version.map
rename to drivers/net/null/version.map
drivers/net/octeontx/version.map renamed from drivers/net/octeontx/rte_pmd_octeontx_version.map +0 -0
similarity index 100%
rename from drivers/net/octeontx/rte_pmd_octeontx_version.map
rename to drivers/net/octeontx/version.map
drivers/net/octeontx2/version.map renamed from drivers/net/octeontx2/rte_pmd_octeontx2_version.map +0 -0
similarity index 100%
rename from drivers/net/octeontx2/rte_pmd_octeontx2_version.map
rename to drivers/net/octeontx2/version.map
drivers/net/pcap/version.map renamed from drivers/net/pcap/rte_pmd_pcap_version.map +0 -0
similarity index 100%
rename from drivers/net/pcap/rte_pmd_pcap_version.map
rename to drivers/net/pcap/version.map
drivers/net/pfe/version.map renamed from drivers/net/pfe/rte_pmd_pfe_version.map +0 -0
similarity index 100%
rename from drivers/net/pfe/rte_pmd_pfe_version.map
rename to drivers/net/pfe/version.map
drivers/net/qede/version.map renamed from drivers/net/qede/rte_pmd_qede_version.map +0 -0
similarity index 100%
rename from drivers/net/qede/rte_pmd_qede_version.map
rename to drivers/net/qede/version.map
drivers/net/ring/version.map renamed from drivers/net/ring/rte_pmd_ring_version.map +0 -0
similarity index 100%
rename from drivers/net/ring/rte_pmd_ring_version.map
rename to drivers/net/ring/version.map
drivers/net/sfc/version.map renamed from drivers/net/sfc/rte_pmd_sfc_version.map +0 -0
similarity index 100%
rename from drivers/net/sfc/rte_pmd_sfc_version.map
rename to drivers/net/sfc/version.map
drivers/net/softnic/version.map renamed from drivers/net/softnic/rte_pmd_softnic_version.map +0 -0
similarity index 100%
rename from drivers/net/softnic/rte_pmd_softnic_version.map
rename to drivers/net/softnic/version.map
drivers/net/szedata2/version.map renamed from drivers/net/szedata2/rte_pmd_szedata2_version.map +0 -0
similarity index 100%
rename from drivers/net/szedata2/rte_pmd_szedata2_version.map
rename to drivers/net/szedata2/version.map
drivers/net/tap/version.map renamed from drivers/net/tap/rte_pmd_tap_version.map +0 -0
similarity index 100%
rename from drivers/net/tap/rte_pmd_tap_version.map
rename to drivers/net/tap/version.map
drivers/net/thunderx/version.map renamed from drivers/net/thunderx/rte_pmd_thunderx_version.map +0 -0
similarity index 100%
rename from drivers/net/thunderx/rte_pmd_thunderx_version.map
rename to drivers/net/thunderx/version.map
drivers/net/vdev_netvsc/version.map renamed from drivers/net/vdev_netvsc/rte_pmd_vdev_netvsc_version.map +0 -0
similarity index 100%
rename from drivers/net/vdev_netvsc/rte_pmd_vdev_netvsc_version.map
rename to drivers/net/vdev_netvsc/version.map
drivers/net/vhost/version.map renamed from drivers/net/vhost/rte_pmd_vhost_version.map +0 -0
similarity index 100%
rename from drivers/net/vhost/rte_pmd_vhost_version.map
rename to drivers/net/vhost/version.map
drivers/net/virtio/version.map renamed from drivers/net/virtio/rte_pmd_virtio_version.map +0 -0
similarity index 100%
rename from drivers/net/virtio/rte_pmd_virtio_version.map
rename to drivers/net/virtio/version.map
drivers/net/vmxnet3/version.map renamed from drivers/net/vmxnet3/rte_pmd_vmxnet3_version.map +0 -0
similarity index 100%
rename from drivers/net/vmxnet3/rte_pmd_vmxnet3_version.map
rename to drivers/net/vmxnet3/version.map
drivers/raw/dpaa2_cmdif/version.map renamed from drivers/raw/dpaa2_cmdif/rte_rawdev_dpaa2_cmdif_version.map +0 -0
similarity index 100%
rename from drivers/raw/dpaa2_cmdif/rte_rawdev_dpaa2_cmdif_version.map
rename to drivers/raw/dpaa2_cmdif/version.map
drivers/raw/dpaa2_qdma/version.map renamed from drivers/raw/dpaa2_qdma/rte_rawdev_dpaa2_qdma_version.map +0 -0
similarity index 100%
rename from drivers/raw/dpaa2_qdma/rte_rawdev_dpaa2_qdma_version.map
rename to drivers/raw/dpaa2_qdma/version.map
drivers/raw/ifpga/version.map renamed from drivers/raw/ifpga/rte_rawdev_ifpga_version.map +0 -0
similarity index 100%
rename from drivers/raw/ifpga/rte_rawdev_ifpga_version.map
rename to drivers/raw/ifpga/version.map
drivers/raw/ioat/version.map renamed from drivers/raw/ioat/rte_rawdev_ioat_version.map +0 -0
similarity index 100%
rename from drivers/raw/ioat/rte_rawdev_ioat_version.map
rename to drivers/raw/ioat/version.map
drivers/raw/ntb/version.map renamed from drivers/raw/ntb/rte_rawdev_ntb_version.map +0 -0
similarity index 100%
rename from drivers/raw/ntb/rte_rawdev_ntb_version.map
rename to drivers/raw/ntb/version.map
drivers/raw/octeontx2_dma/version.map renamed from drivers/raw/octeontx2_dma/rte_rawdev_octeontx2_dma_version.map +0 -0
similarity index 100%
rename from drivers/raw/octeontx2_dma/rte_rawdev_octeontx2_dma_version.map
rename to drivers/raw/octeontx2_dma/version.map
drivers/raw/octeontx2_ep/version.map renamed from drivers/raw/octeontx2_ep/rte_rawdev_octeontx2_ep_version.map +0 -0
similarity index 100%
rename from drivers/raw/octeontx2_ep/rte_rawdev_octeontx2_ep_version.map
rename to drivers/raw/octeontx2_ep/version.map
drivers/raw/skeleton/version.map renamed from drivers/raw/skeleton/rte_rawdev_skeleton_version.map +0 -0
similarity index 100%
rename from drivers/raw/skeleton/rte_rawdev_skeleton_version.map
rename to drivers/raw/skeleton/version.map
drivers/regex/mlx5/version.map renamed from drivers/regex/mlx5/rte_pmd_mlx5_regex_version.map +0 -0
similarity index 100%
rename from drivers/regex/mlx5/rte_pmd_mlx5_regex_version.map
rename to drivers/regex/mlx5/version.map
drivers/regex/octeontx2/version.map renamed from drivers/regex/octeontx2/rte_pmd_octeontx2_regex_version.map +0 -0
similarity index 100%
rename from drivers/regex/octeontx2/rte_pmd_octeontx2_regex_version.map
rename to drivers/regex/octeontx2/version.map
drivers/vdpa/ifc/version.map renamed from drivers/vdpa/ifc/rte_pmd_ifc_version.map +0 -0
similarity index 100%
rename from drivers/vdpa/ifc/rte_pmd_ifc_version.map
rename to drivers/vdpa/ifc/version.map
drivers/vdpa/mlx5/version.map renamed from drivers/vdpa/mlx5/rte_pmd_mlx5_vdpa_version.map +0 -0
similarity index 100%
rename from drivers/vdpa/mlx5/rte_pmd_mlx5_vdpa_version.map
rename to drivers/vdpa/mlx5/version.map
lib/librte_acl/version.map renamed from lib/librte_acl/rte_acl_version.map +0 -0
similarity index 100%
rename from lib/librte_acl/rte_acl_version.map
rename to lib/librte_acl/version.map
lib/librte_bbdev/version.map renamed from lib/librte_bbdev/rte_bbdev_version.map +0 -0
similarity index 100%
rename from lib/librte_bbdev/rte_bbdev_version.map
rename to lib/librte_bbdev/version.map
lib/librte_bitratestats/version.map renamed from lib/librte_bitratestats/rte_bitratestats_version.map +0 -0
similarity index 100%
rename from lib/librte_bitratestats/rte_bitratestats_version.map
rename to lib/librte_bitratestats/version.map
lib/librte_bpf/version.map renamed from lib/librte_bpf/rte_bpf_version.map +0 -0
similarity index 100%
rename from lib/librte_bpf/rte_bpf_version.map
rename to lib/librte_bpf/version.map
lib/librte_cfgfile/version.map renamed from lib/librte_cfgfile/rte_cfgfile_version.map +0 -0
similarity index 100%
rename from lib/librte_cfgfile/rte_cfgfile_version.map
rename to lib/librte_cfgfile/version.map
lib/librte_cmdline/version.map renamed from lib/librte_cmdline/rte_cmdline_version.map +0 -0
similarity index 100%
rename from lib/librte_cmdline/rte_cmdline_version.map
rename to lib/librte_cmdline/version.map
lib/librte_compressdev/version.map renamed from lib/librte_compressdev/rte_compressdev_version.map +0 -0
similarity index 100%
rename from lib/librte_compressdev/rte_compressdev_version.map
rename to lib/librte_compressdev/version.map
lib/librte_cryptodev/version.map renamed from lib/librte_cryptodev/rte_cryptodev_version.map +0 -0
similarity index 100%
rename from lib/librte_cryptodev/rte_cryptodev_version.map
rename to lib/librte_cryptodev/version.map
lib/librte_distributor/version.map renamed from lib/librte_distributor/rte_distributor_version.map +0 -0
similarity index 100%
rename from lib/librte_distributor/rte_distributor_version.map
rename to lib/librte_distributor/version.map
lib/librte_eal/version.map renamed from lib/librte_eal/rte_eal_version.map +0 -0
similarity index 100%
rename from lib/librte_eal/rte_eal_version.map
rename to lib/librte_eal/version.map
lib/librte_efd/version.map renamed from lib/librte_efd/rte_efd_version.map +0 -0
similarity index 100%
rename from lib/librte_efd/rte_efd_version.map
rename to lib/librte_efd/version.map
lib/librte_ethdev/version.map renamed from lib/librte_ethdev/rte_ethdev_version.map +0 -0
similarity index 100%
rename from lib/librte_ethdev/rte_ethdev_version.map
rename to lib/librte_ethdev/version.map
lib/librte_eventdev/version.map renamed from lib/librte_eventdev/rte_eventdev_version.map +0 -0
similarity index 100%
rename from lib/librte_eventdev/rte_eventdev_version.map
rename to lib/librte_eventdev/version.map
lib/librte_fib/version.map renamed from lib/librte_fib/rte_fib_version.map +0 -0
similarity index 100%
rename from lib/librte_fib/rte_fib_version.map
rename to lib/librte_fib/version.map
lib/librte_flow_classify/version.map renamed from lib/librte_flow_classify/rte_flow_classify_version.map +0 -0
similarity index 100%
rename from lib/librte_flow_classify/rte_flow_classify_version.map
rename to lib/librte_flow_classify/version.map
lib/librte_graph/version.map renamed from lib/librte_graph/rte_graph_version.map +0 -0
similarity index 100%
rename from lib/librte_graph/rte_graph_version.map
rename to lib/librte_graph/version.map
lib/librte_gro/version.map renamed from lib/librte_gro/rte_gro_version.map +0 -0
similarity index 100%
rename from lib/librte_gro/rte_gro_version.map
rename to lib/librte_gro/version.map
lib/librte_gso/version.map renamed from lib/librte_gso/rte_gso_version.map +0 -0
similarity index 100%
rename from lib/librte_gso/rte_gso_version.map
rename to lib/librte_gso/version.map
lib/librte_hash/version.map renamed from lib/librte_hash/rte_hash_version.map +0 -0
similarity index 100%
rename from lib/librte_hash/rte_hash_version.map
rename to lib/librte_hash/version.map
lib/librte_ip_frag/version.map renamed from lib/librte_ip_frag/rte_ip_frag_version.map +0 -0
similarity index 100%
rename from lib/librte_ip_frag/rte_ip_frag_version.map
rename to lib/librte_ip_frag/version.map
lib/librte_ipsec/version.map renamed from lib/librte_ipsec/rte_ipsec_version.map +0 -0
similarity index 100%
rename from lib/librte_ipsec/rte_ipsec_version.map
rename to lib/librte_ipsec/version.map
lib/librte_jobstats/version.map renamed from lib/librte_jobstats/rte_jobstats_version.map +0 -0
similarity index 100%
rename from lib/librte_jobstats/rte_jobstats_version.map
rename to lib/librte_jobstats/version.map
lib/librte_kni/version.map renamed from lib/librte_kni/rte_kni_version.map +0 -0
similarity index 100%
rename from lib/librte_kni/rte_kni_version.map
rename to lib/librte_kni/version.map
lib/librte_kvargs/version.map renamed from lib/librte_kvargs/rte_kvargs_version.map +0 -0
similarity index 100%
rename from lib/librte_kvargs/rte_kvargs_version.map
rename to lib/librte_kvargs/version.map
lib/librte_latencystats/version.map renamed from lib/librte_latencystats/rte_latencystats_version.map +0 -0
similarity index 100%
rename from lib/librte_latencystats/rte_latencystats_version.map
rename to lib/librte_latencystats/version.map
lib/librte_lpm/version.map renamed from lib/librte_lpm/rte_lpm_version.map +0 -0
similarity index 100%
rename from lib/librte_lpm/rte_lpm_version.map
rename to lib/librte_lpm/version.map
lib/librte_mbuf/version.map renamed from lib/librte_mbuf/rte_mbuf_version.map +0 -0
similarity index 100%
rename from lib/librte_mbuf/rte_mbuf_version.map
rename to lib/librte_mbuf/version.map
lib/librte_member/version.map renamed from lib/librte_member/rte_member_version.map +0 -0
similarity index 100%
rename from lib/librte_member/rte_member_version.map
rename to lib/librte_member/version.map
lib/librte_mempool/version.map renamed from lib/librte_mempool/rte_mempool_version.map +0 -0
similarity index 100%
rename from lib/librte_mempool/rte_mempool_version.map
rename to lib/librte_mempool/version.map
lib/librte_meter/version.map renamed from lib/librte_meter/rte_meter_version.map +0 -0
similarity index 100%
rename from lib/librte_meter/rte_meter_version.map
rename to lib/librte_meter/version.map
lib/librte_metrics/version.map renamed from lib/librte_metrics/rte_metrics_version.map +0 -0
similarity index 100%
rename from lib/librte_metrics/rte_metrics_version.map
rename to lib/librte_metrics/version.map
lib/librte_net/version.map renamed from lib/librte_net/rte_net_version.map +0 -0
similarity index 100%
rename from lib/librte_net/rte_net_version.map
rename to lib/librte_net/version.map
lib/librte_node/version.map renamed from lib/librte_node/rte_node_version.map +0 -0
similarity index 100%
rename from lib/librte_node/rte_node_version.map
rename to lib/librte_node/version.map
lib/librte_pci/version.map renamed from lib/librte_pci/rte_pci_version.map +0 -0
similarity index 100%
rename from lib/librte_pci/rte_pci_version.map
rename to lib/librte_pci/version.map
lib/librte_pdump/version.map renamed from lib/librte_pdump/rte_pdump_version.map +0 -0
similarity index 100%
rename from lib/librte_pdump/rte_pdump_version.map
rename to lib/librte_pdump/version.map
lib/librte_pipeline/version.map renamed from lib/librte_pipeline/rte_pipeline_version.map +0 -0
similarity index 100%
rename from lib/librte_pipeline/rte_pipeline_version.map
rename to lib/librte_pipeline/version.map
lib/librte_port/version.map renamed from lib/librte_port/rte_port_version.map +0 -0
similarity index 100%
rename from lib/librte_port/rte_port_version.map
rename to lib/librte_port/version.map
lib/librte_power/version.map renamed from lib/librte_power/rte_power_version.map +0 -0
similarity index 100%
rename from lib/librte_power/rte_power_version.map
rename to lib/librte_power/version.map
lib/librte_rawdev/version.map renamed from lib/librte_rawdev/rte_rawdev_version.map +0 -0
similarity index 100%
rename from lib/librte_rawdev/rte_rawdev_version.map
rename to lib/librte_rawdev/version.map
lib/librte_rcu/version.map renamed from lib/librte_rcu/rte_rcu_version.map +0 -0
similarity index 100%
rename from lib/librte_rcu/rte_rcu_version.map
rename to lib/librte_rcu/version.map
lib/librte_regexdev/version.map renamed from lib/librte_regexdev/rte_regexdev_version.map +0 -0
similarity index 100%
rename from lib/librte_regexdev/rte_regexdev_version.map
rename to lib/librte_regexdev/version.map
lib/librte_reorder/version.map renamed from lib/librte_reorder/rte_reorder_version.map +0 -0
similarity index 100%
rename from lib/librte_reorder/rte_reorder_version.map
rename to lib/librte_reorder/version.map
lib/librte_rib/version.map renamed from lib/librte_rib/rte_rib_version.map +0 -0
similarity index 100%
rename from lib/librte_rib/rte_rib_version.map
rename to lib/librte_rib/version.map
lib/librte_ring/version.map renamed from lib/librte_ring/rte_ring_version.map +0 -0
similarity index 100%
rename from lib/librte_ring/rte_ring_version.map
rename to lib/librte_ring/version.map
lib/librte_sched/version.map renamed from lib/librte_sched/rte_sched_version.map +0 -0
similarity index 100%
rename from lib/librte_sched/rte_sched_version.map
rename to lib/librte_sched/version.map
lib/librte_security/version.map renamed from lib/librte_security/rte_security_version.map +0 -0
similarity index 100%
rename from lib/librte_security/rte_security_version.map
rename to lib/librte_security/version.map
lib/librte_stack/version.map renamed from lib/librte_stack/rte_stack_version.map +0 -0
similarity index 100%
rename from lib/librte_stack/rte_stack_version.map
rename to lib/librte_stack/version.map
lib/librte_table/version.map renamed from lib/librte_table/rte_table_version.map +0 -0
similarity index 100%
rename from lib/librte_table/rte_table_version.map
rename to lib/librte_table/version.map
lib/librte_telemetry/version.map renamed from lib/librte_telemetry/rte_telemetry_version.map +0 -0
similarity index 100%
rename from lib/librte_telemetry/rte_telemetry_version.map
rename to lib/librte_telemetry/version.map
lib/librte_timer/version.map renamed from lib/librte_timer/rte_timer_version.map +0 -0
similarity index 100%
rename from lib/librte_timer/rte_timer_version.map
rename to lib/librte_timer/version.map
lib/librte_vhost/version.map renamed from lib/librte_vhost/rte_vhost_version.map +0 -0
similarity index 100%
rename from lib/librte_vhost/rte_vhost_version.map
rename to lib/librte_vhost/version.map
lib/meson.build +2 -2
index e5597f174..8761457c9 100644
@@ -139,8 +139,8 @@ foreach l:libraries
 				# RTE_BUILD_SHARED_LIB defined
 				cflags += '-DRTE_BUILD_SHARED_LIB'
 			endif
-			version_map = '@0@/@1@/rte_@2@_version.map'.format(
-					meson.current_source_dir(), dir_name, name)
+			version_map = '@0@/@1@/version.map'.format(
+					meson.current_source_dir(), dir_name)
 			implib = dir_name + '.dll.a'
 
 			def_file = custom_target(libname + '_def',
Signature · 1 line
2.25.1
Acked-by on v3 5/7
#36 lore raw

Re: [dpdk-dev] [PATCH v3 5/7] build: remove library name from version map filename

Quoted 6 lines · Bruce Richardson

Since each version map file is contained in the subdirectory of the library it refers to, there is no need to include the library name in the filename. This makes things simpler in case of library renaming.

---

Signature · 2 lines
Kind regards,
Luca Boccassi
#37 lore raw

PATCH v3 6/7 build: standardize component names and defines

In reply to Bruce Richardson

As discussed on the dpdk-dev mailing list[1], we can make some easy improvements in standardizing the naming of the various components in DPDK, and their associated feature-enabled macros.

Following this patch, each library will have the name in format, 'librte_<name>.so', and the macro indicating that library is enabled in the build will have the form 'RTE_LIB_<NAME>'.

Similarly, for libraries, the equivalent name formats and macros are:
'librte_<class>_<name>.so' and 'RTE_<CLASS>_<NAME>', where class is the device type taken from the relevant driver subdirectory name, i.e. 'net', 'crypto' etc.

To avoid too many changes at once for end applications, the old macro names will still be provided in the build in this release, but will be removed subsequently.

[1] http://inbox.dpdk.org/dev/[email protected]/t/#u

---
 app/test-bbdev/meson.build            |  4 ++--
 app/test-crypto-perf/meson.build      |  2 +-
 app/test-pmd/meson.build              | 12 ++++++------
 app/test/meson.build                  |  8 ++++----
 doc/guides/rel_notes/deprecation.rst  |  8 ++++++++
 drivers/baseband/meson.build          |  1 -
 drivers/bus/meson.build               |  1 -
 drivers/common/meson.build            |  1 -
 drivers/common/mlx5/meson.build       |  1 -
 drivers/common/qat/meson.build        |  1 -
 drivers/compress/meson.build          |  1 -
 drivers/compress/octeontx/meson.build |  2 +-
 drivers/crypto/meson.build            |  1 -
 drivers/crypto/null/meson.build       |  2 +-
 drivers/crypto/octeontx/meson.build   |  2 +-
 drivers/crypto/octeontx2/meson.build  |  2 +-
 drivers/crypto/scheduler/meson.build  |  2 +-
 drivers/crypto/virtio/meson.build     |  2 +-
 drivers/event/dpaa/meson.build        |  2 +-
 drivers/event/dpaa2/meson.build       |  2 +-
 drivers/event/meson.build             |  1 -
 drivers/event/octeontx/meson.build    |  2 +-
 drivers/event/octeontx2/meson.build   |  2 +-
 drivers/mempool/meson.build           |  1 -
 drivers/meson.build                   |  9 ++++-----
 drivers/net/meson.build               |  1 -
 drivers/net/mlx4/meson.build          |  2 +-
 drivers/raw/ifpga/meson.build         |  2 +-
 drivers/raw/meson.build               |  1 -
 drivers/regex/meson.build             |  1 -
 drivers/vdpa/meson.build              |  1 -
 examples/bond/meson.build             |  2 +-
 examples/ethtool/meson.build          |  2 +-
 examples/ioat/meson.build             |  2 +-
 examples/l2fwd-crypto/meson.build     |  2 +-
 examples/ntb/meson.build              |  2 +-
 examples/vm_power_manager/meson.build |  6 +++---
 lib/librte_ethdev/meson.build         |  1 -
 lib/librte_graph/meson.build          |  2 --
 lib/meson.build                       |  3 ++-
 40 files changed, 47 insertions(+), 55 deletions(-)
app/test-bbdev/meson.build +2 -2
index 18ab6a8c6..178306b08 100644
@@ -7,8 +7,8 @@ sources = files('main.c',
 		'test_bbdev_vector.c')
 deps += ['bbdev', 'bus_vdev']
 if dpdk_conf.has('RTE_LIBRTE_PMD_BBDEV_FPGA_LTE_FEC')
-	deps += ['pmd_bbdev_fpga_lte_fec']
+	deps += ['baseband_fpga_lte_fec']
 endif
 if dpdk_conf.has('RTE_LIBRTE_PMD_BBDEV_FPGA_5GNR_FEC')
-	deps += ['pmd_bbdev_fpga_5gnr_fec']
+	deps += ['baseband_fpga_5gnr_fec']
 endif
app/test-crypto-perf/meson.build +1 -1
index 4bd71510d..e6ddda6f0 100644
@@ -13,5 +13,5 @@ sources = files('cperf_ops.c',
 		'main.c')
 deps += ['cryptodev', 'net', 'security']
 if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER')
-	deps += 'pmd_crypto_scheduler'
+	deps += 'crypto_scheduler'
 endif
app/test-pmd/meson.build +6 -6
index 0d9e45049..2e8b9f8a9 100644
@@ -38,22 +38,22 @@ if dpdk_conf.has('RTE_LIBRTE_LATENCYSTATS')
 	deps += 'latencystats'
 endif
 if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER')
-	deps += 'pmd_crypto_scheduler'
+	deps += 'crypto_scheduler'
 endif
 if dpdk_conf.has('RTE_LIBRTE_BOND_PMD')
-	deps += 'pmd_bond'
+	deps += 'net_bond'
 endif
 if dpdk_conf.has('RTE_LIBRTE_BNXT_PMD')
-	deps += 'pmd_bnxt'
+	deps += 'net_bnxt'
 endif
 if dpdk_conf.has('RTE_LIBRTE_I40E_PMD')
-	deps += 'pmd_i40e'
+	deps += 'net_i40e'
 endif
 if dpdk_conf.has('RTE_LIBRTE_IXGBE_PMD')
-	deps += 'pmd_ixgbe'
+	deps += 'net_ixgbe'
 endif
 if dpdk_conf.has('RTE_LIBRTE_DPAA_PMD')
-	deps += ['bus_dpaa', 'mempool_dpaa', 'pmd_dpaa']
+	deps += ['bus_dpaa', 'mempool_dpaa', 'net_dpaa']
 endif
 if dpdk_conf.has('RTE_LIBRTE_BPF')
 	sources += files('bpf_cmd.c')
app/test/meson.build +4 -4
index fc90a1909..c5ce1d2c0 100644
@@ -345,7 +345,7 @@ if dpdk_conf.has('RTE_LIBRTE_STACK_MEMPOOL')
 	test_deps += 'mempool_stack'
 endif
 if dpdk_conf.has('RTE_LIBRTE_SKELETON_EVENTDEV_PMD')
-	test_deps += 'pmd_skeleton_event'
+	test_deps += 'event_skeleton'
 endif
 if dpdk_conf.has('RTE_LIBRTE_TELEMETRY')
 	test_sources += ['test_telemetry_json.c', 'test_telemetry_data.c']
@@ -355,7 +355,7 @@ endif
 # The following linkages of drivers are required because
 # they are used via a driver-specific API.
 if dpdk_conf.has('RTE_LIBRTE_BOND_PMD')
-	test_deps += 'pmd_bond'
+	test_deps += 'net_bond'
 	test_sources += ['test_link_bonding.c', 'test_link_bonding_rssconf.c']
 	driver_test_names += ['link_bonding_autotest', 'link_bonding_rssconf_autotest']
 	if dpdk_conf.has('RTE_LIBRTE_RING_PMD')
@@ -364,7 +364,7 @@ if dpdk_conf.has('RTE_LIBRTE_BOND_PMD')
 	endif
 endif
 if dpdk_conf.has('RTE_LIBRTE_RING_PMD')
-	test_deps += 'pmd_ring'
+	test_deps += 'net_ring'
 	test_sources += 'test_pmd_ring_perf.c'
 	test_sources += 'test_pmd_ring.c'
 	test_sources += 'test_event_eth_tx_adapter.c'
@@ -415,7 +415,7 @@ endif
 
 if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER')
 	driver_test_names += 'cryptodev_scheduler_autotest'
-	test_deps += 'pmd_crypto_scheduler'
+	test_deps += 'crypto_scheduler'
 endif
 
 foreach d:test_deps
doc/guides/rel_notes/deprecation.rst +8 -0
index 584e72087..69e3ef91c 100644
@@ -11,6 +11,14 @@ here.
 Deprecation Notices
 -------------------
 
+* build: The macros defined to indicate which DPDK libraries and drivers
+  are included in the meson build are changing to a standardized format of
+  ``RTE_LIB_<NAME>`` and ``RTE_<CLASS>_<NAME>``, where ``NAME`` is the
+  upper-case component name, e.g. EAL, ETHDEV, IXGBE, and ``CLASS`` is the
+  upper-case name of the device class to which a driver belongs e.g.
+  ``NET``, ``CRYPTO``, ``VDPA``. The old macros are deprecated and will be
+  removed in a future release.
+
 * meson: The minimum supported version of meson for configuring and building
   DPDK will be increased to v0.47.1 (from 0.41) from DPDK 19.05 onwards. For
   those users with a version earlier than 0.47.1, an updated copy of meson
drivers/baseband/meson.build +0 -1
index 415b6724b..7e1b64ffd 100644
@@ -8,4 +8,3 @@ endif
 drivers = ['null', 'turbo_sw', 'fpga_lte_fec', 'fpga_5gnr_fec']
 
 config_flag_fmt = 'RTE_LIBRTE_PMD_BBDEV_@0@'
-driver_name_fmt = 'rte_pmd_bbdev_@0@'
drivers/bus/meson.build +0 -1
index 80de2d91d..bd73efd18 100644
@@ -4,4 +4,3 @@
 drivers = ['dpaa', 'fslmc', 'ifpga', 'pci', 'vdev', 'vmbus']
 std_deps = ['eal']
 config_flag_fmt = 'RTE_LIBRTE_@0@_BUS'
-driver_name_fmt = 'rte_bus_@0@'
drivers/common/meson.build +0 -1
index abb4f1529..d78882f05 100644
@@ -8,4 +8,3 @@ endif
 std_deps = ['eal']
 drivers = ['cpt', 'dpaax', 'iavf', 'mvep', 'octeontx', 'octeontx2', 'sfc_efx']
 config_flag_fmt = 'RTE_LIBRTE_@0@_COMMON'
-driver_name_fmt = 'rte_common_@0@'
drivers/common/mlx5/meson.build +0 -1
index 8e5608703..3dacc6f68 100644
@@ -8,7 +8,6 @@ if not is_linux
 endif
 
 config_flag_fmt = 'RTE_LIBRTE_@0@_COMMON'
-driver_name_fmt = 'rte_common_@0@'
 deps += ['hash', 'pci', 'bus_pci', 'net', 'eal', 'kvargs']
 sources += files(
 	'mlx5_devx_cmds.c',
drivers/common/qat/meson.build +0 -1
index 3409162d0..fdf8b84f8 100644
@@ -2,7 +2,6 @@
 # Copyright(c) 2017-2018 Intel Corporation
 
 config_flag_fmt = 'RTE_LIBRTE_@0@_COMMON'
-driver_name_fmt = 'rte_common_@0@'
 
 qat_crypto = true
 qat_crypto_path = 'crypto/qat'
drivers/compress/meson.build +0 -1
index 3a4723c0c..33f5e33dd 100644
@@ -9,4 +9,3 @@ drivers = ['isal', 'octeontx', 'zlib']
 
 std_deps = ['compressdev'] # compressdev pulls in all other needed deps
 config_flag_fmt = 'RTE_LIBRTE_PMD_@0@'
-driver_name_fmt = 'rte_pmd_@0@'
drivers/compress/octeontx/meson.build +1 -1
index 0dc98b762..2d71b4da2 100644
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: BSD-3-Clause
 # Copyright(c) 2018 Cavium, Inc
 
-name = 'octeontx_compress'
+fmt_name = 'octeontx_compress'
 sources = files('otx_zip.c', 'otx_zip_pmd.c')
 includes += include_directories('include')
 deps += ['mempool_octeontx', 'bus_pci']
drivers/crypto/meson.build +0 -1
index bd7a940e6..fa5c7ef3a 100644
@@ -26,4 +26,3 @@ drivers = ['aesni_gcm',
 
 std_deps = ['cryptodev'] # cryptodev pulls in all other needed deps
 config_flag_fmt = 'RTE_LIBRTE_PMD_@0@'
-driver_name_fmt = 'rte_pmd_@0@'
drivers/crypto/null/meson.build +1 -1
index 502336da2..421414916 100644
@@ -2,5 +2,5 @@
 # Copyright(c) 2017 Intel Corporation
 
 deps += 'bus_vdev'
-name = 'null_crypto'
+fmt_name = 'null_crypto'
 sources = files('null_crypto_pmd.c', 'null_crypto_pmd_ops.c')
drivers/crypto/octeontx/meson.build +1 -1
index cf031b006..d6939720d 100644
@@ -7,7 +7,7 @@ endif
 
 deps += ['bus_pci']
 deps += ['common_cpt']
-name = 'octeontx_crypto'
+fmt_name = 'octeontx_crypto'
 
 sources = files('otx_cryptodev.c',
 		'otx_cryptodev_capabilities.c',
drivers/crypto/octeontx2/meson.build +1 -1
index 148ec184a..bf502e247 100644
@@ -11,7 +11,7 @@ deps += ['common_cpt']
 deps += ['common_octeontx2']
 deps += ['ethdev']
 deps += ['security']
-name = 'octeontx2_crypto'
+fmt_name = 'octeontx2_crypto'
 
 sources = files('otx2_cryptodev.c',
 		'otx2_cryptodev_capabilities.c',
drivers/crypto/scheduler/meson.build +1 -1
index c5ba2d680..2209c5023 100644
@@ -2,7 +2,7 @@
 # Copyright(c) 2018 Luca Boccassi <[email protected]>
 
 deps += ['bus_vdev', 'reorder']
-name = 'crypto_scheduler'
+fmt_name = 'crypto_scheduler'
 sources = files(
 	'rte_cryptodev_scheduler.c',
 	'scheduler_failover.c',
drivers/crypto/virtio/meson.build +1 -1
index b15b3f9fa..6cea782de 100644
@@ -3,6 +3,6 @@
 
 includes += include_directories('../../../lib/librte_vhost')
 deps += 'bus_pci'
-name = 'virtio_crypto'
+fmt_name = 'virtio_crypto'
 sources = files('virtio_cryptodev.c', 'virtio_pci.c',
 		'virtio_rxtx.c', 'virtqueue.c')
drivers/event/dpaa/meson.build +1 -1
index 2f761f8e5..9abb75e3e 100644
@@ -5,7 +5,7 @@ if not is_linux
 	build = false
 	reason = 'only supported on linux'
 endif
-deps += ['pmd_dpaa', 'pmd_dpaa_sec']
+deps += ['net_dpaa', 'crypto_dpaa_sec']
 sources = files('dpaa_eventdev.c')
 
 includes += include_directories('../../crypto/dpaa_sec/')
drivers/event/dpaa2/meson.build +1 -1
index 71c8be3d6..4ead7bb3e 100644
@@ -5,7 +5,7 @@ if not is_linux
 	build = false
 	reason = 'only supported on linux'
 endif
-deps += ['bus_vdev', 'pmd_dpaa2', 'pmd_dpaa2_sec']
+deps += ['bus_vdev', 'net_dpaa2', 'crypto_dpaa2_sec']
 sources = files('dpaa2_hw_dpcon.c',
 		'dpaa2_eventdev.c',
 		'dpaa2_eventdev_selftest.c')
drivers/event/meson.build +0 -1
index f2a343147..a7dac99de 100644
@@ -12,4 +12,3 @@ if not (toolchain == 'gcc' and cc.version().version_compare('<4.8.6') and
 endif
 std_deps = ['eventdev', 'kvargs']
 config_flag_fmt = 'RTE_LIBRTE_PMD_@0@_EVENTDEV'
-driver_name_fmt = 'rte_pmd_@0@_event'
drivers/event/octeontx/meson.build +1 -1
index 2b74bb62d..41e367684 100644
@@ -10,4 +10,4 @@ sources = files('ssovf_worker.c',
 		'timvf_probe.c'
 )
 
-deps += ['common_octeontx', 'mempool_octeontx', 'bus_vdev', 'pmd_octeontx']
+deps += ['common_octeontx', 'mempool_octeontx', 'bus_vdev', 'net_octeontx']
drivers/event/octeontx2/meson.build +1 -1
index 0ade51cec..3e5eb37d2 100644
@@ -24,6 +24,6 @@ foreach flag: extra_flags
 	endif
 endforeach
 
-deps += ['bus_pci', 'common_octeontx2', 'mempool_octeontx2', 'pmd_octeontx2']
+deps += ['bus_pci', 'common_octeontx2', 'mempool_octeontx2', 'net_octeontx2']
 
 includes += include_directories('../../crypto/octeontx2')
drivers/mempool/meson.build +0 -1
index 7520e489f..a6ddd35b2 100644
@@ -4,4 +4,3 @@
 drivers = ['bucket', 'dpaa', 'dpaa2', 'octeontx', 'octeontx2', 'ring', 'stack']
 std_deps = ['mempool']
 config_flag_fmt = 'RTE_LIBRTE_@0@_MEMPOOL'
-driver_name_fmt = 'rte_mempool_@0@'
drivers/meson.build +4 -5
index 3d4bbff13..a5a6fed06 100644
@@ -33,9 +33,6 @@ foreach subpath:subdirs
 	drivers = []
 	std_deps = []
 	config_flag_fmt = '' # format string used to set the value in dpdk_conf
-	driver_name_fmt = '' # format string for driver name, used to name
-	                     # the library, the dependency and to find the
-	                     # version file for linking
 
 	# subpath can be either "class" or "class/driver"
 	if subpath.contains('/')
@@ -113,11 +110,14 @@ foreach subpath:subdirs
 			endif
 		else
 			enabled_drivers += name
+			lib_name = '_'.join(['rte', class, name])
+			dpdk_conf.set(lib_name.to_upper(), 1)
 
 			if fmt_name == ''
 				fmt_name = name
 			endif
-			dpdk_conf.set(config_flag_fmt.format(fmt_name.to_upper()),1)
+
+			dpdk_conf.set(config_flag_fmt.format(fmt_name.to_upper()),1) #old-style macro
 			# for driver compatibility, since we changed the
 			# default to match that of make. Remove in future release
 			# after following deprecation process
@@ -133,7 +133,6 @@ foreach subpath:subdirs
 				dpdk_conf.set(alt_flag_fmt.format(
 						fmt_name.to_upper()), 1)
 			endif
-			lib_name = driver_name_fmt.format(fmt_name)
 
 			dpdk_extra_ldflags += pkgconfig_extra_libs
 
drivers/net/meson.build +0 -1
index d56b24051..4e4c2c976 100644
@@ -59,4 +59,3 @@ std_deps = ['ethdev', 'kvargs'] # 'ethdev' also pulls in mbuf, net, eal etc
 std_deps += ['bus_pci']         # very many PMDs depend on PCI, so make std
 std_deps += ['bus_vdev']        # same with vdev bus
 config_flag_fmt = 'RTE_LIBRTE_@0@_PMD'
-driver_name_fmt = 'rte_pmd_@0@'
drivers/net/mlx4/meson.build +1 -1
index 5a25e11a7..404006515 100644
@@ -116,7 +116,7 @@ configure_file(output : 'mlx4_autoconf.h', configuration : config)
 # Build Glue Library
 if dlopen_ibverbs
 	dlopen_name = 'mlx4_glue'
-	dlopen_lib_name = driver_name_fmt.format(dlopen_name)
+	dlopen_lib_name = 'rte_net_' + dlopen_name
 	dlopen_so_version = LIB_GLUE_VERSION
 	dlopen_sources = files('mlx4_glue.c')
 	dlopen_install_dir = [ eal_pmd_path + '-glue' ]
drivers/raw/ifpga/meson.build +1 -1
index da454b194..027ff8056 100644
@@ -11,7 +11,7 @@ subdir('base')
 objs = [base_objs]
 
 deps += ['ethdev', 'rawdev', 'pci', 'bus_pci', 'kvargs',
-	'bus_vdev', 'bus_ifpga', 'net', 'pmd_i40e', 'pmd_ipn3ke']
+	'bus_vdev', 'bus_ifpga', 'net', 'net_i40e', 'net_ipn3ke']
 
 sources = files('ifpga_rawdev.c')
 
drivers/raw/meson.build +0 -1
index 2c1e65ec7..d8d6cf582 100644
@@ -12,4 +12,3 @@ drivers = ['dpaa2_cmdif', 'dpaa2_qdma',
 	'skeleton']
 std_deps = ['rawdev']
 config_flag_fmt = 'RTE_LIBRTE_PMD_@0@_RAWDEV'
-driver_name_fmt = 'rte_rawdev_@0@'
drivers/regex/meson.build +0 -1
index 79bb5d5df..880a1b4a3 100644
@@ -4,4 +4,3 @@
 drivers = ['mlx5', 'octeontx2']
 std_deps = ['ethdev', 'kvargs'] # 'ethdev' also pulls in mbuf, net, eal etc
 config_flag_fmt = 'RTE_LIBRTE_@0@_PMD'
-driver_name_fmt = 'rte_pmd_@0@'
drivers/vdpa/meson.build +0 -1
index 798eb3830..b346e4308 100644
@@ -10,4 +10,3 @@ drivers = ['ifc',
 std_deps = ['bus_pci', 'kvargs']
 std_deps += ['vhost']
 config_flag_fmt = 'RTE_LIBRTE_@0@_PMD'
-driver_name_fmt = 'rte_pmd_@0@'
examples/bond/meson.build +1 -1
index 82e355a49..69382ffcd 100644
@@ -6,7 +6,7 @@
 # To build this example as a standalone application with an already-installed
 # DPDK instance, use 'make'
 
-deps += 'pmd_bond'
+deps += 'net_bond'
 allow_experimental_apis = true
 sources = files(
 	'main.c'
examples/ethtool/meson.build +1 -1
index bc7a35514..fdfdd1971 100644
@@ -14,7 +14,7 @@ includes = include_directories('lib', 'ethtool-app')
 
 deps += 'bus_pci'
 if dpdk_conf.has('RTE_LIBRTE_IXGBE_PMD')
-	deps += 'pmd_ixgbe'
+	deps += 'net_ixgbe'
 endif
 
 allow_experimental_apis = true
examples/ioat/meson.build +1 -1
index f72cf70e7..f1a045a0a 100644
@@ -9,7 +9,7 @@
 allow_experimental_apis = true
 build = dpdk_conf.has('RTE_LIBRTE_PMD_IOAT_RAWDEV')
 
-deps += ['rawdev_ioat']
+deps += ['raw_ioat']
 
 sources = files(
 	'ioatfwd.c'
examples/l2fwd-crypto/meson.build +1 -1
index 39e1604fa..9002d62a6 100644
@@ -8,7 +8,7 @@
 
 deps += 'cryptodev'
 if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER')
-	deps += 'pmd_crypto_scheduler'
+	deps += 'crypto_scheduler'
 endif
 allow_experimental_apis = true
 sources = files(
examples/ntb/meson.build +1 -1
index 45a59350c..bac6e5cd2 100644
@@ -16,5 +16,5 @@ sources = files(
 	'ntb_fwd.c'
 )
 if dpdk_conf.has('RTE_LIBRTE_PMD_NTB_RAWDEV')
-	deps += 'rawdev_ntb'
+	deps += 'raw_ntb'
 endif
examples/vm_power_manager/meson.build +3 -3
index 54e2b584f..2dd132015 100644
@@ -14,15 +14,15 @@ endif
 deps += ['power']
 
 if dpdk_conf.has('RTE_LIBRTE_BNXT_PMD')
-	deps += ['pmd_bnxt']
+	deps += ['net_bnxt']
 endif
 
 if dpdk_conf.has('RTE_LIBRTE_I40E_PMD')
-	deps += ['pmd_i40e']
+	deps += ['net_i40e']
 endif
 
 if dpdk_conf.has('RTE_LIBRTE_IXGBE_PMD')
-	deps += ['pmd_ixgbe']
+	deps += ['net_ixgbe']
 endif
 
 allow_experimental_apis = true
lib/librte_ethdev/meson.build +0 -1
index 8fc24e8c8..e4b610246 100644
@@ -1,7 +1,6 @@
 # SPDX-License-Identifier: BSD-3-Clause
 # Copyright(c) 2017 Intel Corporation
 
-name = 'ethdev'
 sources = files('ethdev_private.c',
 	'ethdev_profile.c',
 	'ethdev_trace_points.c',
lib/librte_graph/meson.build +0 -2
index d5de1e250..d3ec78ca6 100644
@@ -1,8 +1,6 @@
 # SPDX-License-Identifier: BSD-3-Clause
 # Copyright(C) 2020 Marvell International Ltd.
 
-name = 'graph'
-
 sources = files('node.c', 'graph.c', 'graph_ops.c', 'graph_debug.c', 'graph_stats.c', 'graph_populate.c')
 headers = files('rte_graph.h', 'rte_graph_worker.h')
 
lib/meson.build +2 -1
index 8761457c9..5f8177e1a 100644
@@ -98,7 +98,8 @@ foreach l:libraries
 		set_variable(name.underscorify() + '_disable_reason', reason)
 	else
 		enabled_libs += name
-		dpdk_conf.set('RTE_LIBRTE_' + name.to_upper(), 1)
+		dpdk_conf.set('RTE_LIBRTE_' + name.to_upper(), 1) #old macro
+		dpdk_conf.set('RTE_LIB_' + name.to_upper(), 1) # new macro
 		install_headers(headers)
 
 		libname = 'rte_' + name
Signature · 1 line
2.25.1
#38 lore raw

Re: [dpdk-dev] [PATCH v3 6/7] build: standardize component names and defines

Quoted 54 lines · Bruce Richardson

As discussed on the dpdk-dev mailing list[1], we can make some easy improvements in standardizing the naming of the various components in DPDK, and their associated feature-enabled macros.

Following this patch, each library will have the name in format, 'librte_<name>.so', and the macro indicating that library is enabled in the build will have the form 'RTE_LIB_<NAME>'.

Similarly, for libraries, the equivalent name formats and macros are:
'librte_<class>_<name>.so' and 'RTE_<CLASS>_<NAME>', where class is the device type taken from the relevant driver subdirectory name, i.e. 'net', 'crypto' etc.

To avoid too many changes at once for end applications, the old macro names will still be provided in the build in this release, but will be removed subsequently.

[1] http://inbox.dpdk.org/dev/[email protected]/t/#u

---
 app/test-bbdev/meson.build            |  4 ++--
 app/test-crypto-perf/meson.build      |  2 +-
 app/test-pmd/meson.build              | 12 ++++++------
 app/test/meson.build                  |  8 ++++----
 doc/guides/rel_notes/deprecation.rst  |  8 ++++++++
 drivers/baseband/meson.build          |  1 -
 drivers/bus/meson.build               |  1 -
 drivers/common/meson.build            |  1 -
 drivers/common/mlx5/meson.build       |  1 -
 drivers/common/qat/meson.build        |  1 -
 drivers/compress/meson.build          |  1 -
 drivers/compress/octeontx/meson.build |  2 +-
 drivers/crypto/meson.build            |  1 -
 drivers/crypto/null/meson.build       |  2 +-
 drivers/crypto/octeontx/meson.build   |  2 +-
 drivers/crypto/octeontx2/meson.build  |  2 +-
 drivers/crypto/scheduler/meson.build  |  2 +-
 drivers/crypto/virtio/meson.build     |  2 +-
 drivers/event/dpaa/meson.build        |  2 +-
 drivers/event/dpaa2/meson.build       |  2 +-
 drivers/event/meson.build             |  1 -
 drivers/event/octeontx/meson.build    |  2 +-
 drivers/event/octeontx2/meson.build   |  2 +-
 drivers/mempool/meson.build           |  1 -
 drivers/meson.build                   |  9 ++++-----
 drivers/net/meson.build               |  1 -
 drivers/net/mlx4/meson.build          |  2 +-
 drivers/raw/ifpga/meson.build         |  2 +-
 drivers/raw/meson.build               |  1 -
 drivers/regex/meson.build             |  1 -
 drivers/vdpa/meson.build              |  1 -
 examples/bond/meson.build             |  2 +-
 examples/ethtool/meson.build          |  2 +-
Quoted 8 lines
 examples/ioat/meson.build             |  2 +-
 examples/l2fwd-crypto/meson.build     |  2 +-
 examples/ntb/meson.build              |  2 +-
 examples/vm_power_manager/meson.build |  6 +++---
 lib/librte_ethdev/meson.build         |  1 -
 lib/librte_graph/meson.build          |  2 --
 lib/meson.build                       |  3 ++-
 40 files changed, 47 insertions(+), 55 deletions(-)

Does this change the share object file names too, or only the macros?

Signature · 2 lines
Kind regards,
Luca Boccassi
#39 lore raw

Re: [dpdk-dev] [PATCH v3 6/7] build: standardize component names and defines

Quoted 64 lines · Luca Boccassi
Quoted 54 lines · Bruce Richardson

As discussed on the dpdk-dev mailing list[1], we can make some easy improvements in standardizing the naming of the various components in DPDK, and their associated feature-enabled macros.

Following this patch, each library will have the name in format, 'librte_<name>.so', and the macro indicating that library is enabled in the build will have the form 'RTE_LIB_<NAME>'.

Similarly, for libraries, the equivalent name formats and macros are:
'librte_<class>_<name>.so' and 'RTE_<CLASS>_<NAME>', where class is the device type taken from the relevant driver subdirectory name, i.e. 'net', 'crypto' etc.

To avoid too many changes at once for end applications, the old macro names will still be provided in the build in this release, but will be removed subsequently.

[1] http://inbox.dpdk.org/dev/[email protected]/t/#u

---
 app/test-bbdev/meson.build            |  4 ++--
 app/test-crypto-perf/meson.build      |  2 +-
 app/test-pmd/meson.build              | 12 ++++++------
 app/test/meson.build                  |  8 ++++----
 doc/guides/rel_notes/deprecation.rst  |  8 ++++++++
 drivers/baseband/meson.build          |  1 -
 drivers/bus/meson.build               |  1 -
 drivers/common/meson.build            |  1 -
 drivers/common/mlx5/meson.build       |  1 -
 drivers/common/qat/meson.build        |  1 -
 drivers/compress/meson.build          |  1 -
 drivers/compress/octeontx/meson.build |  2 +-
 drivers/crypto/meson.build            |  1 -
 drivers/crypto/null/meson.build       |  2 +-
 drivers/crypto/octeontx/meson.build   |  2 +-
 drivers/crypto/octeontx2/meson.build  |  2 +-
 drivers/crypto/scheduler/meson.build  |  2 +-
 drivers/crypto/virtio/meson.build     |  2 +-
 drivers/event/dpaa/meson.build        |  2 +-
 drivers/event/dpaa2/meson.build       |  2 +-
 drivers/event/meson.build             |  1 -
 drivers/event/octeontx/meson.build    |  2 +-
 drivers/event/octeontx2/meson.build   |  2 +-
 drivers/mempool/meson.build           |  1 -
 drivers/meson.build                   |  9 ++++-----
 drivers/net/meson.build               |  1 -
 drivers/net/mlx4/meson.build          |  2 +-
 drivers/raw/ifpga/meson.build         |  2 +-
 drivers/raw/meson.build               |  1 -
 drivers/regex/meson.build             |  1 -
 drivers/vdpa/meson.build              |  1 -
 examples/bond/meson.build             |  2 +-
 examples/ethtool/meson.build          |  2 +-
Quoted 8 lines
 examples/ioat/meson.build             |  2 +-
 examples/l2fwd-crypto/meson.build     |  2 +-
 examples/ntb/meson.build              |  2 +-
 examples/vm_power_manager/meson.build |  6 +++---
 lib/librte_ethdev/meson.build         |  1 -
 lib/librte_graph/meson.build          |  2 --
 lib/meson.build                       |  3 ++-
 40 files changed, 47 insertions(+), 55 deletions(-)
Quoted 2 lines

Does this change the share object file names too, or only the macros?

It does indeed change the object name files, which is a little bit concerning. However, the consensus based on the RFC seemed to be that the benefit is likely worth the change. If we want, we can look to use symlinks to the old names on install, but I think that just delays the pain since I would expect few to actually change their build to the new names until the old ones and the symlinks completely go away.

/Bruce

#40 lore raw

Re: [dpdk-dev] [PATCH v3 6/7] build: standardize component names and defines

Quoted 68 lines · Bruce Richardson
Quoted 64 lines · Luca Boccassi
Quoted 54 lines · Bruce Richardson

As discussed on the dpdk-dev mailing list[1], we can make some easy improvements in standardizing the naming of the various components in DPDK, and their associated feature-enabled macros.

Following this patch, each library will have the name in format, 'librte_<name>.so', and the macro indicating that library is enabled in the build will have the form 'RTE_LIB_<NAME>'.

Similarly, for libraries, the equivalent name formats and macros are:
'librte_<class>_<name>.so' and 'RTE_<CLASS>_<NAME>', where class is the device type taken from the relevant driver subdirectory name, i.e. 'net', 'crypto' etc.

To avoid too many changes at once for end applications, the old macro names will still be provided in the build in this release, but will be removed subsequently.

[1] http://inbox.dpdk.org/dev/[email protected]/t/#u

---
 app/test-bbdev/meson.build            |  4 ++--
 app/test-crypto-perf/meson.build      |  2 +-
 app/test-pmd/meson.build              | 12 ++++++------
 app/test/meson.build                  |  8 ++++----
 doc/guides/rel_notes/deprecation.rst  |  8 ++++++++
 drivers/baseband/meson.build          |  1 -
 drivers/bus/meson.build               |  1 -
 drivers/common/meson.build            |  1 -
 drivers/common/mlx5/meson.build       |  1 -
 drivers/common/qat/meson.build        |  1 -
 drivers/compress/meson.build          |  1 -
 drivers/compress/octeontx/meson.build |  2 +-
 drivers/crypto/meson.build            |  1 -
 drivers/crypto/null/meson.build       |  2 +-
 drivers/crypto/octeontx/meson.build   |  2 +-
 drivers/crypto/octeontx2/meson.build  |  2 +-
 drivers/crypto/scheduler/meson.build  |  2 +-
 drivers/crypto/virtio/meson.build     |  2 +-
 drivers/event/dpaa/meson.build        |  2 +-
 drivers/event/dpaa2/meson.build       |  2 +-
 drivers/event/meson.build             |  1 -
 drivers/event/octeontx/meson.build    |  2 +-
 drivers/event/octeontx2/meson.build   |  2 +-
 drivers/mempool/meson.build           |  1 -
 drivers/meson.build                   |  9 ++++-----
 drivers/net/meson.build               |  1 -
 drivers/net/mlx4/meson.build          |  2 +-
 drivers/raw/ifpga/meson.build         |  2 +-
 drivers/raw/meson.build               |  1 -
 drivers/regex/meson.build             |  1 -
 drivers/vdpa/meson.build              |  1 -
 examples/bond/meson.build             |  2 +-
 examples/ethtool/meson.build          |  2 +-
Quoted 8 lines
 examples/ioat/meson.build             |  2 +-
 examples/l2fwd-crypto/meson.build     |  2 +-
 examples/ntb/meson.build              |  2 +-
 examples/vm_power_manager/meson.build |  6 +++---
 lib/librte_ethdev/meson.build         |  1 -
 lib/librte_graph/meson.build          |  2 --
 lib/meson.build                       |  3 ++-
 40 files changed, 47 insertions(+), 55 deletions(-)
Quoted 2 lines

Does this change the share object file names too, or only the macros?

Quoted 8 lines

It does indeed change the object name files, which is a little bit concerning. However, the consensus based on the RFC seemed to be that the benefit is likely worth the change. If we want, we can look to use symlinks to the old names on install, but I think that just delays the pain since I would expect few to actually change their build to the new names until the old ones and the symlinks completely go away.

/Bruce

It is a backward incompatible change, so we need to provide symlinks, right? On upgrade, programs linked to librte_old.so will fail to start. Or was this targeted at 20.11 thus piggy-backing on the ABI change which forces a re-link?

Signature · 2 lines
Kind regards,
Luca Boccassi
#41 lore raw

Re: [dpdk-dev] [PATCH v3 6/7] build: standardize component names and defines

Quoted 76 lines · Luca Boccassi
Quoted 75 lines · Bruce Richardson
Quoted 64 lines · Luca Boccassi
Quoted 54 lines · Bruce Richardson

As discussed on the dpdk-dev mailing list[1], we can make some easy improvements in standardizing the naming of the various components in DPDK, and their associated feature-enabled macros.

Following this patch, each library will have the name in format, 'librte_<name>.so', and the macro indicating that library is enabled in the build will have the form 'RTE_LIB_<NAME>'.

Similarly, for libraries, the equivalent name formats and macros are:
'librte_<class>_<name>.so' and 'RTE_<CLASS>_<NAME>', where class is the device type taken from the relevant driver subdirectory name, i.e. 'net', 'crypto' etc.

To avoid too many changes at once for end applications, the old macro names will still be provided in the build in this release, but will be removed subsequently.

[1] http://inbox.dpdk.org/dev/[email protected]/t/#u

---
 app/test-bbdev/meson.build            |  4 ++--
 app/test-crypto-perf/meson.build      |  2 +-
 app/test-pmd/meson.build              | 12 ++++++------
 app/test/meson.build                  |  8 ++++----
 doc/guides/rel_notes/deprecation.rst  |  8 ++++++++
 drivers/baseband/meson.build          |  1 -
 drivers/bus/meson.build               |  1 -
 drivers/common/meson.build            |  1 -
 drivers/common/mlx5/meson.build       |  1 -
 drivers/common/qat/meson.build        |  1 -
 drivers/compress/meson.build          |  1 -
 drivers/compress/octeontx/meson.build |  2 +-
 drivers/crypto/meson.build            |  1 -
 drivers/crypto/null/meson.build       |  2 +-
 drivers/crypto/octeontx/meson.build   |  2 +-
 drivers/crypto/octeontx2/meson.build  |  2 +-
 drivers/crypto/scheduler/meson.build  |  2 +-
 drivers/crypto/virtio/meson.build     |  2 +-
 drivers/event/dpaa/meson.build        |  2 +-
 drivers/event/dpaa2/meson.build       |  2 +-
 drivers/event/meson.build             |  1 -
 drivers/event/octeontx/meson.build    |  2 +-
 drivers/event/octeontx2/meson.build   |  2 +-
 drivers/mempool/meson.build           |  1 -
 drivers/meson.build                   |  9 ++++-----
 drivers/net/meson.build               |  1 -
 drivers/net/mlx4/meson.build          |  2 +-
 drivers/raw/ifpga/meson.build         |  2 +-
 drivers/raw/meson.build               |  1 -
 drivers/regex/meson.build             |  1 -
 drivers/vdpa/meson.build              |  1 -
 examples/bond/meson.build             |  2 +-
 examples/ethtool/meson.build          |  2 +-
Quoted 8 lines
 examples/ioat/meson.build             |  2 +-
 examples/l2fwd-crypto/meson.build     |  2 +-
 examples/ntb/meson.build              |  2 +-
 examples/vm_power_manager/meson.build |  6 +++---
 lib/librte_ethdev/meson.build         |  1 -
 lib/librte_graph/meson.build          |  2 --
 lib/meson.build                       |  3 ++-
 40 files changed, 47 insertions(+), 55 deletions(-)
Quoted 2 lines

Does this change the share object file names too, or only the macros?

It does indeed change the object name files, which is a little bit concerning. However, the consensus based on the RFC seemed to be that the benefit is likely worth the change. If we want, we can look to use symlinks to the old names on install, but I think that just delays the pain since I would expect few to actually change their build to the new names until the old ones and the symlinks completely go away.

Quoted 7 lines
Quoted 1 line

/Bruce

It is a backward incompatible change, so we need to provide symlinks, right? On upgrade, programs linked to librte_old.so will fail to start. Or was this targeted at 20.11 thus piggy-backing on the ABI change which forces a re-link?

More of the latter, and the fact that changing the build system involved a few library renames anyway for those using make. Since the ABI is changing this release, and all the libs have a new major version number there is no requirement for libs linked against an older version to work, and since pkg-config should now be used for linking the actual names should not be a concern.

That's the thinking anyway. :-)

/Bruce

Acked-by
#42 lore raw

Re: [dpdk-dev] [PATCH v3 6/7] build: standardize component names and defines

Quoted 91 lines · Bruce Richardson
Quoted 76 lines · Luca Boccassi
Quoted 75 lines · Bruce Richardson
Quoted 64 lines · Luca Boccassi
Quoted 54 lines · Bruce Richardson

As discussed on the dpdk-dev mailing list[1], we can make some easy improvements in standardizing the naming of the various components in DPDK, and their associated feature-enabled macros.

Following this patch, each library will have the name in format, 'librte_<name>.so', and the macro indicating that library is enabled in the build will have the form 'RTE_LIB_<NAME>'.

Similarly, for libraries, the equivalent name formats and macros are:
'librte_<class>_<name>.so' and 'RTE_<CLASS>_<NAME>', where class is the device type taken from the relevant driver subdirectory name, i.e. 'net', 'crypto' etc.

To avoid too many changes at once for end applications, the old macro names will still be provided in the build in this release, but will be removed subsequently.

[1] http://inbox.dpdk.org/dev/[email protected]/t/#u

---
 app/test-bbdev/meson.build            |  4 ++--
 app/test-crypto-perf/meson.build      |  2 +-
 app/test-pmd/meson.build              | 12 ++++++------
 app/test/meson.build                  |  8 ++++----
 doc/guides/rel_notes/deprecation.rst  |  8 ++++++++
 drivers/baseband/meson.build          |  1 -
 drivers/bus/meson.build               |  1 -
 drivers/common/meson.build            |  1 -
 drivers/common/mlx5/meson.build       |  1 -
 drivers/common/qat/meson.build        |  1 -
 drivers/compress/meson.build          |  1 -
 drivers/compress/octeontx/meson.build |  2 +-
 drivers/crypto/meson.build            |  1 -
 drivers/crypto/null/meson.build       |  2 +-
 drivers/crypto/octeontx/meson.build   |  2 +-
 drivers/crypto/octeontx2/meson.build  |  2 +-
 drivers/crypto/scheduler/meson.build  |  2 +-
 drivers/crypto/virtio/meson.build     |  2 +-
 drivers/event/dpaa/meson.build        |  2 +-
 drivers/event/dpaa2/meson.build       |  2 +-
 drivers/event/meson.build             |  1 -
 drivers/event/octeontx/meson.build    |  2 +-
 drivers/event/octeontx2/meson.build   |  2 +-
 drivers/mempool/meson.build           |  1 -
 drivers/meson.build                   |  9 ++++-----
 drivers/net/meson.build               |  1 -
 drivers/net/mlx4/meson.build          |  2 +-
 drivers/raw/ifpga/meson.build         |  2 +-
 drivers/raw/meson.build               |  1 -
 drivers/regex/meson.build             |  1 -
 drivers/vdpa/meson.build              |  1 -
 examples/bond/meson.build             |  2 +-
 examples/ethtool/meson.build          |  2 +-
Quoted 8 lines
 examples/ioat/meson.build             |  2 +-
 examples/l2fwd-crypto/meson.build     |  2 +-
 examples/ntb/meson.build              |  2 +-
 examples/vm_power_manager/meson.build |  6 +++---
 lib/librte_ethdev/meson.build         |  1 -
 lib/librte_graph/meson.build          |  2 --
 lib/meson.build                       |  3 ++-
 40 files changed, 47 insertions(+), 55 deletions(-)
Quoted 2 lines

Does this change the share object file names too, or only the macros?

It does indeed change the object name files, which is a little bit concerning. However, the consensus based on the RFC seemed to be that the benefit is likely worth the change. If we want, we can look to use symlinks to the old names on install, but I think that just delays the pain since I would expect few to actually change their build to the new names until the old ones and the symlinks completely go away.

Quoted 7 lines
Quoted 1 line

/Bruce

It is a backward incompatible change, so we need to provide symlinks, right? On upgrade, programs linked to librte_old.so will fail to start. Or was this targeted at 20.11 thus piggy-backing on the ABI change which forces a re-link?

More of the latter, and the fact that changing the build system involved a few library renames anyway for those using make. Since the ABI is changing this release, and all the libs have a new major version number there is no requirement for libs linked against an older version to work, and since pkg-config should now be used for linking the actual names should not be a concern.

Quoted 3 lines

That's the thinking anyway. :-)

/Bruce

Ok that makes sense, I wasn't sure if this series was targeted for 20.11 or for later. In that case,

Signature · 2 lines
Kind regards,
Luca Boccassi
#43 lore raw

Re: [dpdk-dev] [PATCH v3 6/7] build: standardize component names and defines

Quoted 92 lines · Luca Boccassi
Quoted 91 lines · Bruce Richardson
Quoted 76 lines · Luca Boccassi
Quoted 75 lines · Bruce Richardson
Quoted 64 lines · Luca Boccassi
Quoted 54 lines · Bruce Richardson

As discussed on the dpdk-dev mailing list[1], we can make some easy improvements in standardizing the naming of the various components in DPDK, and their associated feature-enabled macros.

Following this patch, each library will have the name in format, 'librte_<name>.so', and the macro indicating that library is enabled in the build will have the form 'RTE_LIB_<NAME>'.

Similarly, for libraries, the equivalent name formats and macros are:
'librte_<class>_<name>.so' and 'RTE_<CLASS>_<NAME>', where class is the device type taken from the relevant driver subdirectory name, i.e. 'net', 'crypto' etc.

To avoid too many changes at once for end applications, the old macro names will still be provided in the build in this release, but will be removed subsequently.

[1] http://inbox.dpdk.org/dev/[email protected]/t/#u

---
 app/test-bbdev/meson.build            |  4 ++--
 app/test-crypto-perf/meson.build      |  2 +-
 app/test-pmd/meson.build              | 12 ++++++------
 app/test/meson.build                  |  8 ++++----
 doc/guides/rel_notes/deprecation.rst  |  8 ++++++++
 drivers/baseband/meson.build          |  1 -
 drivers/bus/meson.build               |  1 -
 drivers/common/meson.build            |  1 -
 drivers/common/mlx5/meson.build       |  1 -
 drivers/common/qat/meson.build        |  1 -
 drivers/compress/meson.build          |  1 -
 drivers/compress/octeontx/meson.build |  2 +-
 drivers/crypto/meson.build            |  1 -
 drivers/crypto/null/meson.build       |  2 +-
 drivers/crypto/octeontx/meson.build   |  2 +-
 drivers/crypto/octeontx2/meson.build  |  2 +-
 drivers/crypto/scheduler/meson.build  |  2 +-
 drivers/crypto/virtio/meson.build     |  2 +-
 drivers/event/dpaa/meson.build        |  2 +-
 drivers/event/dpaa2/meson.build       |  2 +-
 drivers/event/meson.build             |  1 -
 drivers/event/octeontx/meson.build    |  2 +-
 drivers/event/octeontx2/meson.build   |  2 +-
 drivers/mempool/meson.build           |  1 -
 drivers/meson.build                   |  9 ++++-----
 drivers/net/meson.build               |  1 -
 drivers/net/mlx4/meson.build          |  2 +-
 drivers/raw/ifpga/meson.build         |  2 +-
 drivers/raw/meson.build               |  1 -
 drivers/regex/meson.build             |  1 -
 drivers/vdpa/meson.build              |  1 -
 examples/bond/meson.build             |  2 +-
 examples/ethtool/meson.build          |  2 +-
Quoted 8 lines
 examples/ioat/meson.build             |  2 +-
 examples/l2fwd-crypto/meson.build     |  2 +-
 examples/ntb/meson.build              |  2 +-
 examples/vm_power_manager/meson.build |  6 +++---
 lib/librte_ethdev/meson.build         |  1 -
 lib/librte_graph/meson.build          |  2 --
 lib/meson.build                       |  3 ++-
 40 files changed, 47 insertions(+), 55 deletions(-)
Quoted 2 lines

Does this change the share object file names too, or only the macros?

It does indeed change the object name files, which is a little bit concerning. However, the consensus based on the RFC seemed to be that the benefit is likely worth the change. If we want, we can look to use symlinks to the old names on install, but I think that just delays the pain since I would expect few to actually change their build to the new names until the old ones and the symlinks completely go away.

Quoted 7 lines
Quoted 1 line

/Bruce

It is a backward incompatible change, so we need to provide symlinks, right? On upgrade, programs linked to librte_old.so will fail to start. Or was this targeted at 20.11 thus piggy-backing on the ABI change which forces a re-link?

More of the latter, and the fact that changing the build system involved a few library renames anyway for those using make. Since the ABI is changing this release, and all the libs have a new major version number there is no requirement for libs linked against an older version to work, and since pkg-config should now be used for linking the actual names should not be a concern.

Quoted 9 lines
Quoted 3 lines

That's the thinking anyway. :-)

/Bruce

Ok that makes sense, I wasn't sure if this series was targeted for 20.11 or for later. In that case,

Yes, if it doesn't make 20.11 we'll have to re-evaluate and be stricter with the compatibility constraints. It might not be worth doing post-20.11.