Skip to contentSkip to conversation

About starup

U-Boot-Users Mike Lee 2 participants 2 messages Feb 14, 2005

lore
Share & tools
lore

Mike Lee

author
#0 lore raw

Dear All
When i start the non- compressed kernel, it will print "Linux
version 2.4.18-rmk4", and when i bootup the compressed kernel , "uncompressed linux ......" is displayed. Both situation will reboot the machine and come back to the bootloader. Do anybody know what is the problem? Do i set anything wrong?

best regard
Mike,Lee

#1 lore raw
Quoted 6 lines · In message <[email protected]> you wrote:

When i start the non- compressed kernel, it will print "Linux
version 2.4.18-rmk4", and when i bootup the compressed kernel , "uncompressed linux ......" is displayed. Both situation will reboot the machine and come back to the bootloader. Do anybody know what is the problem? Do i set anything wrong?

Yes, you did: the mail address you're sending this message to. If you see a "Linux version" starup message that means that the Linux kernel is already running and crashing. That means, you should probably ask on the Linux mailing list instead.

[I assume you did read the FAQ, like this one:
http://www.denx.de/twiki/bin/view/DULG/LinuxKernelIgnoresMyBootargs ]

Best regards,

Wolfgang Denk

Signature · 3 lines
See us @ Embedded World, Nuremberg, Feb 22 - 24,  Hall 10.0 Booth 310
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
I have often regretted my speech, never my silence.