Program map for USB devices
Hi,
I've got several USB devices which are all accessed as SCSI disc through the usb-storage driver. Since the device node they are attached to depends on plugin order, I need to know how to find out which hardware is attached to which /dev/sd*, so that I can write a program map.
Any hints?
Thanx...
Dirk
Signature · 6 lines
Dirk Heinrichs | Tel: +49 (0)151 1513 6954 Configuration Manager | Fax: +49 (0)211 47068 111 Cap Gemini Ernst & Young| Mail: [email protected] Hambornerstraße 55 | Web: http://www.cgey.com D-40472 Düsseldorf | ICQ#: 110037733 GPG Public Key C2E467BB | Keyserver: www.keyserver.net
_______________________________________________
autofs mailing list
[email protected]
http://linux.kernel.org/mailman/listinfo/autofs
Quoted 4 lines · Dirk Heinrichs
I've got several USB devices which are all accessed as SCSI disc through the usb-storage driver. Since the device node they are attached to depends on plugin order, I need to know how to find out which hardware is attached to which
/dev/sd*, so that I can write a program map.
Your program map could look at /proc/scsi/* to determine what's what.
Derrell
Quoted 9 lines · [email protected] wrote:
Quoted 1 line · Dirk Heinrichs
I've got several USB devices which are all accessed as SCSI disc through the usb-storage driver. Since the device node they are attached to depends on plugin order, I need to know how to find out which hardware is attached to which
/dev/sd*, so that I can write a program map.Your program map could look at
/proc/scsi/*to determine what's what.Derrell
First of all look at mount for mount point of procfs(type proc). For 2.6 kernels, as i think, you also could look into new sysfs for needed info.
Good luck. Ruslan.