Voodoo 3 bug on 2.3.99pre3
hello all...
ok i dont know weather i am writing to the right people but here goes.
I have a voodoo 3 2000 PCI card on my UMAX s900 SMP and i was trying to get
the SMP and the Voodoo to work with linux I decided to start with the graphics card i got a 2.3.99pre3 kernel via ftp from kernel.org and compiled it with voodoo support but NO ati card support (since i dont have ati -- well i do but i dont use it and it failed to compile when i had ATI checked anyway) thus i it compiled booted but the whoole console display was completely messed up sorta reversed with weird colors etc basically a complete mess.
So i was just wondering if anyone had any ideas on getting it to work or am
i wasting my time.....
thanks =)
PS talk about a weird/unsupported setup eh....
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
Quoted 1 line · sabotage
I have a voodoo 3 2000 PCI card on my UMAX s900 SMP and i was trying to get
You can try the _experimental_ kernel & XFree86 3.9.16 rpm from Kostas:
ftp://idd-01.imbc.gr/pub/voodoo3
NOTE: XFree86 4.0 REQUIRES a very different /etc/X11/XF86Config file from XFree86 3.x. I have some different XF86Config files at:
http://www.cise.ufl.edu/~phandel/linux/sample/
Also, you *may* need to change the BusID number based on what slot your Voodoo3 is in (BusID "PCI:0:15:0" for me) if commenting it out doesn't work.
3.9.16 runs well, although not as fast as 4.0. I've put a comparison of the Rage128-x86, TNT2, and Voodoo3 XF86 3.9.16 & 4.0 on my web page:
http://www.cise.ufl.edu/~phandel/linux/txt/r128_tnt2_v3.txt
I believe these were all done at 1024x768 16bpp.
Thanks,
Peter
[btw- you can also copy the tdfxfb.c from 2.3.x to a 2.2.14 tree and apply Kostas' tdfxfb patch, which is what I'm running]
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/