Okay, lost
Okay, I can't seem to get any of the pre-compiled linux kernels after the 2.2.14 one on oss.sgi.com to boot on my Indy.
I get this type of error:
Exception: <vector=Normal>
Status register: 0x10044803<CU0,CH,IM7,IM4,IPL=???,MODE=KERNEL,EXL,IE> Cause register: 0x8034<CE=0,IP8,EXC=TRAP>
Exception PC: 0x88240004, Exception RA: 0x8816d610 Processor Trap exception at address 0xffffffff
Local I/O interrupt register 1: 0x80 <VR/GIO2>
Saved user regs in hex (&gpda 0xa8740e48, &_regs 0xa8741048): arg: a8740000 28 8847ff80 a tmp: a8740000 8480 88002000 8480 881932a0 1 fffffffc 47dfa8 sve: a8740000 0 0 0 0 0 0 0 t8 a8740000 t9 0 at 0 v0 0 v1 0 k1 88002000 gp a8740000 fp 0 sp 0 ra 0
PANIC: unexpected exception
Or something similar.
Quoted 3 lines · A. Wrasman
Okay, I can't seem to get any of the pre-compiled linux kernels after the 2.2.14 one on oss.sgi.com to boot on my Indy. I get this type of error:
Exception: <vector=Normal>
I've no idea what kernels you're using. Try /pub/linux/mips/mips-linux/simple/kernels/vmlinux-000717-38400 if you want to try a post-2.2 kernel. It really should work.
Signature · 3 lines
Keith M Wesolowski [email protected] University of Nevada http://www.chem.unr.edu Chemistry Department Systems and Network Administrator
Quoted 9 lines · A. Wrasman
Okay, I can't seem to get any of the pre-compiled linux kernels after the 2.2.14 one on oss.sgi.com to boot on my Indy.
I get this type of error:
Exception: <vector=Normal>
Status register: 0x10044803<CU0,CH,IM7,IM4,IPL=???,MODE=KERNEL,EXL,IE> Cause register: 0x8034<CE=0,IP8,EXC=TRAP>
Exception PC:0x88240004, Exception RA:0x8816d610Processor Trap exception at address0xffffffff
Local I/O interrupt register 1:0x80<VR/GIO2>
Quoted 8 lines
Saved user regs in hex (&gpda 0xa8740e48, &_regs 0xa8741048): arg: a8740000 28 8847ff80 a tmp: a8740000 8480 88002000 8480 881932a0 1 fffffffc 47dfa8 sve: a8740000 0 0 0 0 0 0 0 t8 a8740000 t9 0 at 0 v0 0 v1 0 k1 88002000 gp a8740000 fp 0 sp 0 ra 0PANIC: unexpected exception
Now that looks like a kernel compiled by somebody who doesn't read documentation, see http://oss.sgi.com/mips/mips-howto.html. In short:
remove the -N linker flag from arch/mips/Makefile.
Ralf
Quoted 16 lines
Quoted 16 lines
Okay, I can't seem to get any of the pre-compiled linux kernels after the 2.2.14 one on oss.sgi.com to boot on my Indy.
I get this type of error:
Exception: <vector=Normal>
Status register: 0x10044803<CU0,CH,IM7,IM4,IPL=???,MODE=KERNEL,EXL,IE> Cause register: 0x8034<CE=0,IP8,EXC=TRAP>
Exception PC:0x88240004, Exception RA:0x8816d610Processor Trap exception at address0xffffffff
Local I/O interrupt register 1:0x80<VR/GIO2>Saved user regs in hex (&gpda 0xa8740e48, &_regs 0xa8741048): arg: a8740000 28 8847ff80 a tmp: a8740000 8480 88002000 8480 881932a0 1 fffffffc 47dfa8 sve: a8740000 0 0 0 0 0 0 0 t8 a8740000 t9 0 at 0 v0 0 v1 0 k1 88002000 gp a8740000 fp 0 sp 0 ra 0
Quoted 5 lines
Quoted 1 line
PANIC: unexpected exception
Now that looks like a kernel compiled by somebody who doesn't read documentation, see http://oss.sgi.com/mips/mips-howto.html. In short:
remove the -N linker flag fromarch/mips/Makefile.
I had the same problem on one of my machines. The -N linker flag was not the solution. Note that the kernels ran on other machines. I only got this for the 2.4, not 2.2.
Ulf
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 11 lines · Ralf Baechle
Quoted 1 line · A. Wrasman
Well removed the 2 extra cards from the box. Still no go.
Thanks.
I suspect that there is some magic configuration which crashes. Since hardware doesn't make the difference it might also be the PROM version. Basically I believe that under certain circumstances the kernel overwrites PROM data structures or vice versa or there is (yet another ...) ARC firmware bug which results in a crash.
I've got version 5.3 of the prom for IP22. Of course SGI is doing some update of the support section of their site this weekend so I can't even poke around to see what updates have come out, since I have't patched IRIX 6.2 in over 2 years on this box.
How can I go about troubleshooting the kernel at this point? The odd thing is a 2.2.14 (and an older 2.2.1) kernel all work fine.
Since most of the work is now being done on the 2.4 kernel it would be nice to get nearer to what the development is being done on.
Quoted 2 lines
Ralf