Skip to contentSkip to conversation

status note: 2.4.0-test6 paulus on 7200

DISCUSSION Andreas Tobler 2 participants 2 messages Aug 7, 2000 – Aug 27, 2000

lore
Share & tools
lore
#0 lore raw

hi all,

a short status note, the 7200 boots again with the latest linux-pmac-devel. It took a long time, but finally it works again. Thanks to all who helped. One thing I have, although. My 7200 doesn't use the internal SCSI bus nor the external. I use a 2940UW to boot from. But this device gets only recognized when I apply the attached patch. From Geert.
So, I don't know who to contact to comment this patch. (Well, I actually know who, but I get few to no responses)

Thanks
Andreas

#1 lore raw
Quoted 7 lines · Andreas Tobler

a short status note, the 7200 boots again with the latest linux-pmac-devel. It took a long time, but finally it works again. Thanks to all who helped. One thing I have, although. My 7200 doesn't use the internal SCSI bus nor the external. I use a 2940UW to boot from. But this device gets only recognized when I apply the attached patch. From Geert.
So, I don't know who to contact to comment this patch. (Well, I actually know who, but I get few to no responses)

This doesn't work for me with 2.4.0-test7 (todays BK). I now get failed to allocate resource {0,1} for device Adaptec-7881U and then aic7xxx fails to active the device due to a pci resource conflict.

--
Tom Rini (TR1265)
http://gate.crashing.org/~trini/

** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/