Skip to contentSkip to conversation

via-cuda (CUDA_COMBINED_FORMAT_IIC)

PATCH Iain Sandoe 1 participant 1 message Aug 30, 2000

lore
Share & tools
lore
#0 lore raw
Quoted 5 lines · David A. Gatwood
Quoted 2 lines · Iain Sandoe

I really would be very grateful if anyone has any more sources of info on the command packets contents for it (CUDA)...

Like what sort of info, and what sort of command?

OK. I want to read the contents of an I2c chip. I checked the data sheet for the chip - it can do it.

I look in cuda.h - we have a command called CUDA_GET_SET_IIC - which is used by the dmasound driver to set values in the chip. The name implies I can read values using it... but.. with the (several) permutations I tried (guesswork) - no joy.

So then someone tells me that what I need is COMBINED_FORMAT_IIC - so I've implemented it - which involves a re-jig of the CUDA state machine... this is the patch.

I was very happy to see data streaming out of the i2c bus... and then very disappointed that several devices (including the one I want) return nothing but 0xff...

now the COMBINED_FORMAT_IIC command is of the form:

[0x01, 0x25] aa ?? aa|1

Looking at the i2c spec. ?? is probably the sub address (or the second byte for a 10 bit address)... but when I try other than 00 in this - often the
CUDA becomes confused... So I wonder whether there are different command
lengths I can try and, ....... many permutations (and re-boots) later I conclude that:

00 is the only reliable working value for ??
COMBINED_FORMAT_IIC commands must be 5 bytes long (0x01, 0x25, aa, ??, aa|1) or they do not work (or lock up the CUDA)...

**of course** I'm guessing and there could just be one bit I need to set somewhere to make it work... but I've run out of time for trying random permutations....

=====
In general...

The command works properly - when there is no i2c device on the bus it returns an error. BUT something is wrong with the command for four devices on the bus in my g3-beige - they only return an endless stream of 0xff.

A long response (sorry) - but the answer is:
(a) Either some hint on how to use the GET_SET_IIC command for the purpose or
(b) some hint on what extra needs to be done with COMBINED_FORMAT_IIC for the job.

TIA,
Iain.

** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/