PowerBook 2000 + Mouse + 2.4.0-test7
Hi All,
quick question, with a 2.4.0-test7 that was fresh as of last Friday.
On my PowerBook 2000, the kernel machine checks when it init's the serial ports
and once I redid my config file to remove that support, kernel boots but X no longer recognizes the trackpad. (Yet on a 2.2.x series with the ibook kernels it does) Is this a known problem?
--
Tom Gall - PowerPC Linux Team "Where's the ka-boom? There was
Linux Technology Center supposed to be an earth
(w) [email protected] shattering ka-boom!"
(w) 507-253-4558 -- Marvin Martian
(h) [email protected]
http://oss.software.ibm.com/developerworks/opensource/linux
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
Quoted 5 lines
Hi All,
quick question, with a 2.4.0-test7 that was fresh as of last Friday.
I don't know for Linus test-7, but I can speak for the current state of bk 2.4-test8
Quoted 3 lines
On my PowerBook 2000, the kernel machine checks when it init's the serial ports
You probably have the "legacy" (dumb) serial ports compiled in. The Macintosh serial ports are a separate option. The ISA bus doesn't exist, an nobody answer to legacy IO addresses on a mac, thus causing the machine check.
Quoted 4 lines
and once I redid my config file to remove that support, kernel boots but X no longer recognizes the trackpad. (Yet on a 2.2.x series with the ibook kernels it
does) Is this a known problem?
Get the bk tree. In the "Macintosh Drivers" option, you can either enable the ADB HID that comes with the input devices, or the old mac_keyb.c driver. If you are using the mac_keyb.c driver, then you can also select the old adbmouse.c driver in "Char devices/Mice). This should allow your current 2.2.x setup to work.
If you want to switch to the new input layer, then enable the ABD HID. You'll have to create the appropriate /dev entries for, at least, /dev/ input/mice, and change /dev/usbmouse and /dev/mouse to point to it. You can safely remove /dev/adbmouse. Note that the old adbmouse driver was BusMouse protocol while the new input layer provides you with PS/2 datas, like USB mice.
Ben (who is happily running 2.4 on the Pismo powerbook (2000)).
Ben.
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/