blk-8 oopses at boot (was: blk-7 fails to boot)
Hi Jens.
I've tried your blk-8 patch and it oopses during boot. I only hand copied the stack trace, and ran it through ksymoops:
Call Trace: [<c01310e0>] [<c0131f55>] [<c014c88e>] [<c014c3dc>]
[<c01b9cea>] [<c014c4ea>] [<c014c456>]
[<c01ba3a4>] [<c018c7ab>] [<c0105000>] [<c018c8ae>] [<c01070e7>][<c0108ce3>]
Warning (Oops_read): Code line not seen, dumping what data is available
Trace; c01310e0 <__wait_on_buffer+90/c0> Trace; c0131f55 <bread+45/70>
Trace; c014c88e <msdos_partition+8e/3f0> Trace; c014c3dc <check_partition+8c/d0> Trace; c01b9cea <sd_init_onedisk+75a/770> Trace; c014c4ea <grok_partitions+8a/d0> Trace; c014c456 <register_disk+26/30>
Trace; c01ba3a4 <sd_finish+134/1c0>
Trace; c018c7ab <scsi_register_device_module+eb/110> Trace; c0105000 <empty_bad_page+0/1000> Trace; c018c8ae <scsi_register_module+4e/60> Trace; c01070e7 <init+7/150>
Trace; c0108ce3 <kernel_thread+23/30>
I'm going to try taking MSDOS out of my .config to try to work around this. I'll keep you posted as to my progress.
David Mansfield
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/
Quoted 25 lines · David Mansfield
Hi Jens.
I've tried your blk-8 patch and it oopses during boot. I only hand copied the stack trace, and ran it through ksymoops:
Call Trace: [<c01310e0>] [<c0131f55>] [<c014c88e>] [<c014c3dc>] [<c01b9cea>] [<c014c4ea>] [<c014c456>] [<c01ba3a4>] [<c018c7ab>] [<c0105000>] [<c018c8ae>] [<c01070e7>][<
c0108ce3>]
Warning (Oops_read): Code line not seen, dumping what data is availableTrace;
c01310e0<__wait_on_buffer+90/c0> Trace;c0131f55<bread+45/70>
Trace;c014c88e<msdos_partition+8e/3f0> Trace;c014c3dc<check_partition+8c/d0> Trace;c01b9cea<sd_init_onedisk+75a/770> Trace;c014c4ea<grok_partitions+8a/d0> Trace;c014c456<register_disk+26/30>
Trace;c01ba3a4<sd_finish+134/1c0>
Trace;c018c7ab<scsi_register_device_module+eb/110> Trace;c0105000<empty_bad_page+0/1000> Trace;c018c8ae<scsi_register_module+4e/60> Trace;c01070e7<init+7/150>
Trace;c0108ce3<kernel_thread+23/30>
Quoted 2 lines
I'm going to try taking MSDOS out of my .config to try to work around this. I'll keep you posted as to my progress.
Thanks, I think this is a generic msdos problem though. If it still oopses without blk-8, could you send the complete oops please?
Signature · 6 lines
* Jens Axboe <[email protected]> * SuSE Labs - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] Please read the FAQ at http://www.tux.org/lkml/