fix compile problem in belkin_sa.c

diff -Naur -X /home/greg/linux/dontdiff linux-2.4.0-test11-pre3/drivers/usb/serial/belkin_sa.c linux-2.4.0-test11-pre3-greg/drivers/usb/serial/belkin_sa.c
@@ -85,13 +85,35 @@
 static int  belkin_sa_ioctl		(struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg);
 static void belkin_sa_break_ctl		(struct usb_serial_port *port, int break_state );
 
+
+static __devinitdata struct usb_device_id id_table_combined [] = {
+	{ idVendor: BELKIN_SA_VID,	idProduct: BELKIN_SA_PID },
+	{ idVendor: BELKIN_OLD_VID,	idProduct: BELKIN_OLD_PID },
+	{ idVendor: PERACOM_VID,	idProduct: PERACOM_PID },
+	{ }							/* Terminating entry */
+};
+
+static __devinitdata struct usb_device_id belkin_sa_table [] = {
+	{ idVendor: BELKIN_SA_VID,	idProduct: BELKIN_SA_PID },
+	{ }							/* Terminating entry */
+};
+
+static __devinitdata struct usb_device_id belkin_old_table [] = {
+	{ idVendor: BELKIN_OLD_VID,	idProduct: BELKIN_OLD_PID },
+	{ }							/* Terminating entry */
+};
+
+static __devinitdata struct usb_device_id peracom_table [] = {
+	{ idVendor: PERACOM_VID,	idProduct: PERACOM_PID },
+	{ }							/* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE (usb, id_table_combined);
+
 /* All of the device info needed for the Belkin serial converter */
-static __u16	belkin_sa_vendor_id	= BELKIN_SA_VID;
-static __u16	belkin_sa_product_id	= BELKIN_SA_PID;
 struct usb_serial_device_type belkin_sa_device = {
 	name:			"Belkin F5U103 USB Serial Adapter",
-	idVendor:		&belkin_sa_vendor_id,		/* the Belkin vendor ID */
-	idProduct:		&belkin_sa_product_id,		/* the Belkin F5U103 product id */
+	id_table:		belkin_sa_table,		/* the Belkin F5U103 device */
 	needs_interrupt_in:	MUST_HAVE,			/* this device must have an interrupt in endpoint */
 	needs_bulk_in:		MUST_HAVE,			/* this device must have a bulk in endpoint */
 	needs_bulk_out:		MUST_HAVE,			/* this device must have a bulk out endpoint */

@@ -111,12 +133,9 @@
 
 
 /* This driver also supports the "old" school Belkin single port adaptor */
-static __u16	belkin_old_vendor_id	= BELKIN_OLD_VID;
-static __u16	belkin_old_product_id	= BELKIN_OLD_PID;
 struct usb_serial_device_type belkin_old_device = {
 	name:			"Belkin USB Serial Adapter",
-	idVendor:		&belkin_old_vendor_id,		/* the Belkin vendor ID */
-	idProduct:		&belkin_old_product_id,		/* the Belkin product id */
+	id_table:		belkin_old_table,		/* the old Belkin device */
 	needs_interrupt_in:	MUST_HAVE,			/* this device must have an interrupt in endpoint */
 	needs_bulk_in:		MUST_HAVE,			/* this device must have a bulk in endpoint */
 	needs_bulk_out:		MUST_HAVE,			/* this device must have a bulk out endpoint */

@@ -135,12 +154,9 @@
 };
 
 /* this driver also works for the Peracom single port adapter */
-static __u16	peracom_vendor_id	= PERACOM_VID;
-static __u16	peracom_product_id	= PERACOM_PID;
 struct usb_serial_device_type peracom_device = {
 	name:			"Peracom single port USB Serial Adapter",
-	idVendor:		&peracom_vendor_id,		/* the Peracom vendor ID */
-	idProduct:		&peracom_product_id,		/* the Peracom product id */
+	id_table:		peracom_table,			/* the Peracom device */
 	needs_interrupt_in:	MUST_HAVE,			/* this device must have an interrupt in endpoint */
 	needs_bulk_in:		MUST_HAVE,			/* this device must have a bulk in endpoint */
 	needs_bulk_out:		MUST_HAVE,			/* this device must have a bulk out endpoint */

@@ -284,7 +300,6 @@
 	struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
 	struct belkin_sa_private *priv = (struct belkin_sa_private *)port->private;
 	struct usb_serial *serial;
-	struct tty_struct *tty;
 	unsigned char *data = urb->transfer_buffer;
 
 	/* the urb might have been killed. */

@@ -360,7 +375,7 @@
 	unsigned int cflag = port->tty->termios->c_cflag;
 	unsigned int old_iflag = old_termios->c_iflag;
 	unsigned int old_cflag = old_termios->c_cflag;
-	__u16 urb_value; /* Will hold the new flags */
+	__u16 urb_value = 0; /* Will hold the new flags */
 	
 	/* Set the baud rate */
 	if( (cflag&CBAUD) != (old_cflag&CBAUD) ) {