Skip to contentSkip to conversation

r128 driver still borked in XF4.0.1-9pre10

DISCUSSION Jonathan Lane 1 participant 1 message Dec 7, 2000

lore
Share & tools
lore
#0 lore raw
Quoted 4 lines

It's possible that the black screen was caused by a font path issue that, I think, was recently fixed in XFree CVS. The PCI problems are of a different nature.

Nope, it was a PCI problem -- moved the card to slot 1 (bus 0) and it works fine now... however, my second ethernet card, which now resides in slot 5 (bus 1 card 2) now doesn't function properly... (it *seems* to work, but ceases to function after a short while saying "no interrupts being serviced" or something similar).

Quoted 7 lines
Quoted 6 lines

PS. If it helps, it appears that the kernel is incorrectly assigning the
IRQ for my video board to IRQ 1.. Looking at /proc/interrupts, I don't see that there have been any interrupts serviced for IRQ 1, so I'm assuming either it is intentionally hidden from the kernel, or is unused and may actually be used by a PCI card.. anyone care to comment on this?

Quoted 6 lines

No, IRQ 1 may well be correct. I don't think the video driver uses it's interrupts in Linux.

You more probably have a machine with 2 host bridges (and no PCI<->PCI bridge), so you can either try with Michel Lanners patches for 2.2, or try a recent 2.4.

Tried both 2.4.0test11 and 2.2.17 & 2.2.18pre21 w/ Michel Lanners patches; none of them solved the problem. I will check the 2.4 bitkeeper kernel, though.

Quoted 1 line

Do you have 2 "bandit" chips in the device-tree ?

colour:~> cat /proc/pci
PCI devices found:
Bus 0, device 11, function 0:
Host bridge: Apple Bandit (rev 3).
Medium devsel. Fast back-to-back capable. Master Capable. Latency=32.
Bus 0, device 13, function 0:

    VGA compatible controller: ATI Unknown device (rev 0).
      Vendor id=1002. Device id=5245.
      Medium devsel.  Fast back-to-back capable.  IRQ 23.  Master Capable.  Latency=32.  Min Gnt=8.
      Prefetchable 32 bit memory at 0x84000000 [0x84000008].
      I/O at 0x400 [0x401].
      Non-prefetchable 32 bit memory at 0x80904000 [0x80904000].
  Bus  0, device  14, function  0:
    USB Controller: OPTi Unknown device (rev 16).
      Vendor id=1045. Device id=c861.
      Medium devsel.  Fast back-to-back capable.  IRQ 24.  Master Capable.  Latency=32.
      Non-prefetchable 32 bit memory at 0x80900000 [0x80900000].
  Bus  0, device  15, function  0:
    PCI bridge: DEC DC21052 (rev 1).
      Medium devsel.  Fast back-to-back capable.  Master Capable.  Latency=32.  Min Gnt=4.
  Bus  0, device  16, function  0:
    Hot Swap Controller: Apple Grand Central (rev 2).
      Medium devsel.  Master Capable.  Latency=32.
      Non-prefetchable 32 bit memory at 0xf3000000 [0xf3000000].
  Bus  1, device   2, function  0:
    Ethernet controller: 3Com Unknown device (rev 48).
      Vendor id=10b7. Device id=9200.
      Medium devsel.  IRQ 1.  Master Capable.  Latency=32.  Min Gnt=10.Max Lat=10.
      I/O at 0x1000 [0x1001].
      Non-prefetchable 32 bit memory at 0x80800000 [0x80800000].

Regards,
Jonathan

** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/