Skip to contentSkip to conversation

Oops while assigning PCI resources

DISCUSSION Russell King 1 participant 2 messages Dec 7, 2000

lore
Share & tools
lore
#0 lore raw

Hi,

Kernel is 2.4.0-test12-pre7

I'm seeing an oops while assigning PCI resources on an ARM board. This board as a PCI to PCI bridge on board without any devices on the second bus.

Trace is:

Trace; c0013ac0 <pbus_assign_resources+0/e4> Trace; c0013ba4 <pci_assign_unassigned_resources+0/98> Trace; c0009f34 <pcibios_init+0/68>
Trace; c0012db4 <pci_init+0/44>
Trace; c00089ec <do_basic_setup+0/54>

The place which is causing the oops is in drivers/pci/setup-bus.c:

        for (ln=bus->children.next; ln != &bus->children; ln=ln->next) {
                struct pci_bus *b = pci_bus_b(ln);

                vvvvvvvvvvvvvvvvvvvvv
                b->resource[0]->start = ranges->io_start = ranges->io_end;
                ^^^^^^^^^^^^^^^^^^^^^
                b->resource[1]->start = ranges->mem_start = ranges->mem_end;

                pbus_assign_resources(b, ranges);

The reason is because b->resource is NULL. Looking at drivers/pci/pci.c, when we hit a non-cardbus bridge, we never set b->resource[*] to point to anything. We call "pci_add_new_bus" from pci_scan_bridge, but neither pci_add_new_bus nor pci_scan_bridge sets up the resources.

Unfortunately, the PCI bus code (in drivers/pci/setup-bus.c) seems to assume that someone somewhere has allocated these resources.
_____

  |_____| ------------------------------------------------- ---+---+-
  |   |         Russell King        [email protected]      --- ---
  | | | | http://www.arm.linux.org.uk/personal/aboutme.html   /  /  |
  | +-+-+                                                     --- -+-
  /   |               THE developer of ARM Linux              |+| /|\
 /  | | |                                                     ---  |
    +-+-+ -------------------------------------------------  /\\\  |

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/

#1 lore raw
Quoted 3 lines · Russell King

I'm seeing an oops while assigning PCI resources on an ARM board. This board as a PCI to PCI bridge on board without any devices on the second bus.

I've solved this one, sorry for the noise.
_____

  |_____| ------------------------------------------------- ---+---+-
  |   |         Russell King        [email protected]      --- ---
  | | | | http://www.arm.linux.org.uk/personal/aboutme.html   /  /  |
  | +-+-+                                                     --- -+-
  /   |               THE developer of ARM Linux              |+| /|\
 /  | | |                                                     ---  |
    +-+-+ -------------------------------------------------  /\\\  |

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/