Request: increase in PCI bus limit
Quoted 5 lines · In article <[email protected]> you wrote:
I guess the cleanest solution would be to allow variable setting of the maximum number of PCI busses in the config file, similar to the
CONFIG_UNIX98_PTY_COUNTsetting, so that "exotic" users with 32+ PCI busses can boost the standard value according to their needs, without having to increase kernel size for the normal users.
May even decrease the kernel for systems < 4 busses.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/
[Bernd Eckenfels]
Quoted 1 line
May even decrease the kernel for systems < 4 busses.
Be careful, though. Users may set this thinking "I have a generic system with only one PCI bus" without realizing that AGP, cardbus and some motherboard devices are all counted. Pad the CONFIG option by about 4 busses and we'll be OK..
Peter
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/
Quoted 7 lines · Peter Samuelson
[Bernd Eckenfels]
Quoted 1 line
May even decrease the kernel for systems < 4 busses.
Be careful, though. Users may set this thinking "I have a generic system with only one PCI bus" without realizing that AGP, cardbus and some motherboard devices are all counted. Pad the CONFIG option by about 4 busses and we'll be OK..
If someone says 1 bus, give them one bus.
Just make the description say:
Add 1 for every PCI
Add 1 for every AGP
Add 1 for every CardBus
Also account for anything else funny in the system.
Then panic on boot if they're wrong (sort of like processor type).
It's somewhat annoying that by choosing SMP NR_CPUS goes to 32 when I know I only have (and ever will have) 2 in this machine. Don't make busses have the same assumptions that just waste memory.
-George Greer
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/
Quoted 10 lines · George
If someone says 1 bus, give them one bus.
Just make the description say:
Add 1 for every PCI
Add 1 for every AGP
Add 1 for every CardBus
Also account for anything else funny in the system.Then panic on boot if they're wrong (sort of like processor type).
Where do cards with PCI-PCI bridges, like multiport PCI ethernet cards, fit into this? I can easily add 3 or 4 extra busses into a box just by grabbing a couple extra Intel dual-port Ethernet cards.
Scott
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/
depends on the network card. The adaptecs have one. the Obsidion X16 and X24 have them. Many dual channel SCSI cards use them, and even some nicer motherboards have them onboard. I would like to recommend autodetection at boot, but I'm assuming that someone has looked into it and determined it impractical?
Nick
Quoted 19 lines · Scott Laird
Quoted 10 lines · George
If someone says 1 bus, give them one bus.
Just make the description say:
Add 1 for every PCI
Add 1 for every AGP
Add 1 for every CardBus
Also account for anything else funny in the system.Then panic on boot if they're wrong (sort of like processor type).
Where do cards with PCI-PCI bridges, like multiport PCI ethernet cards, fit into this? I can easily add 3 or 4 extra busses into a box just by grabbing a couple extra Intel dual-port Ethernet cards.
Quoted 7 lines
Scott
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/
Quoted 3 lines · Scott Laird
Where do cards with PCI-PCI bridges, like multiport PCI ethernet cards, fit into this? I can easily add 3 or 4 extra busses into a box just by grabbing a couple extra Intel dual-port Ethernet cards.
I loaded a PC with quad-tulip cards once and the result was not pretty. IRQs all over the place, and /proc/pci shat all over itself too
-Dan
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/
Quoted 8 lines · Scott Laird
Quoted 3 lines · George
Also account for anything else funny in the system.
Then panic on boot if they're wrong (sort of like processor type).
Where do cards with PCI-PCI bridges, like multiport PCI ethernet cards, fit into this? I can easily add 3 or 4 extra busses into a box just by grabbing a couple extra Intel dual-port Ethernet cards.
Notice the 'also account for anything funny' line. Multiport ethernet cards IMO fall under this category.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/
Quoted 3 lines · George
It's somewhat annoying that by choosing SMP
NR_CPUSgoes to 32 when I know I only have (and ever will have) 2 in this machine. Don't make busses have the same assumptions that just waste memory.
It's just sad that bumping to NR_CPUS to 128 won't work that easily ;-)
Ralf (fixing that so he gets some machine time again ...)