Skip to contentSkip to conversation

Etherworks3 driver now obsolete?

DISCUSSION Darren Tucker 4 participants 4 messages Feb 1, 2001 – Feb 3, 2001

lore
Share & tools
lore
#0 lore raw

Hi all.

I decided to try a shiny new 2.4.0 kernel but I couldn't configure the driver for my etherworks3 ISA ethernet card (AMD K6III PC hardware).

A bit of grepping showed that it only appears if CONFIG_OBSOLETE is defined but nothing in the configuration tools seems to set it (at least for i386).

CONFIG_OBSOLETE is checked for by Config.in for a couple of drivers (net and char), but the only place it seems to be defined is for the ARM architecture.

Is this deliberate? Are some of the older drivers to be phased out? Should there be a "bool 'Prompt for obsolete code/drivers' CONFIG_OBSOLETE" in the config.in for other architectures, too?

Thanks.

		-Daz.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/

#1 lore raw
Quoted 6 lines

CONFIG_OBSOLETE is checked for by Config.in for a couple of drivers (net and char), but the only place it seems to be defined is for the ARM architecture.

Is this deliberate? Are some of the older drivers to be phased out? Should there be a "bool 'Prompt for obsolete code/drivers' CONFIG_OBSOLETE" in the config.in for other architectures, too?

You could do but its really there to take out drivers that need fixing and nobody has yet decided to look at

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/

#2 lore raw
In reply to Darren Tucker
Quoted 5 lines · Darren Tucker

I decided to try a shiny new 2.4.0 kernel but I couldn't configure the driver for my etherworks3 ISA ethernet card (AMD K6III PC hardware).

A bit of grepping showed that it only appears if CONFIG_OBSOLETE is defined but nothing in the configuration tools seems to set it (at least for i386).

If you are willing to be a target^H^H^Htester, then I can probably whip up a patch to fix it.

Quoted 6 lines

CONFIG_OBSOLETE is checked for by Config.in for a couple of drivers (net and char), but the only place it seems to be defined is for the ARM architecture.

Is this deliberate? Are some of the older drivers to be phased out? Should there be a "bool 'Prompt for obsolete code/drivers' CONFIG_OBSOLETE" in the config.in for other architectures, too?

CONFIG_OBSOLETE really means "this driver is broken, don't EVER show it in the kernel config."

Jeff

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/

#3 lore raw
In reply to Darren Tucker
Quoted 9 lines · Jeff Garzik
Quoted 5 lines · Darren Tucker

I decided to try a shiny new 2.4.0 kernel but I couldn't configure the driver for my etherworks3 ISA ethernet card (AMD K6III PC hardware).

A bit of grepping showed that it only appears if CONFIG_OBSOLETE is defined but nothing in the configuration tools seems to set it (at least for i386).

If you are willing to be a target^H^H^Htester, then I can probably whip up a patch to fix it.

i have two ewrk3 cards here. if you want stuff tested that can certainly be arranged, as i'd like to use them. (i used them with 2.2, they worked very well)

unfortunately can't test both cards in one machine until i install linux on a box with more than one isa slot. maybe a project for tomorrow :-)

j.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/