Skip to contentSkip to conversation

2.4.1 lvm reiserfs adaptec 2940uw noritake alpha

DISCUSSION Wakko Warner 2 participants 2 messages Feb 2, 2001

lore
Share & tools
lore
#0 lore raw

I have 3 2gb disks in an lvm group (vg is disks)
I have an lv of 1.6gb (misc) with reiserfs mounted /lvm/misc I cp /dev/zero /lvm/misc

If these 3 drives are on the internal qlogic isp controller, I have no problems.

If these 3 drives are on the adaptec aha-2940UW, I get an oops (reply for oops as I have to do it again and capture it) and the system locks (in interrupt handler, not syncing) when the copy completes. I did a timed cp the first time and it took 3.5 minutes and crashed as soon as I got the prompt. I'm assuming when the bufferes were flushed to the drives.

When I reboot and copy the file, it works. I don't have any problems copying files with these drives on either controller.

I have the adaptec card on the primary pci bus if that makes a difference

Signature · 5 lines
 Lab tests show that use of micro$oft causes cancer in lab animals
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/
#1 lore raw
Quoted 6 lines

If these 3 drives are on the adaptec aha-2940UW, I get an oops (reply for oops as I have to do it again and capture it) and the system locks (in interrupt handler, not syncing) when the copy completes. I did a timed cp the first time and it took 3.5 minutes and crashed as soon as I got the prompt. I'm assuming when the bufferes were flushed to the drives.

I would appreciate your feedback on the new aic7xxx driver found here:

http://people.FreeBSD.org/~gibbs/linux/

--
Justin
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/