Matrox Marvell G400
How well is this card supported for it's capture capabilities and dual head?
Signature · 5 lines
Lab tests show that use of micro$oft causes cancer in lab animals - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] Please read the FAQ at http://www.tux.org/lkml/
Quoted 1 line · Wakko Warner
How well is this card supported for it's capture capabilities and dual head?
Capture and dual head are almost totally unsupported without using a proprietary, binary only driver chunk which will soundly place your system as 'unsupported' as far as this list is concerned due to the difficulty of debugging a system when sourceless software bangs the hardware.
If this situation is not ideals for you, I suggest you address the issue with Matrox.
That said, it is a dandy general 2d/3d card.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/
Quoted 10 lines · Gregory Maxwell
Quoted 1 line · Wakko Warner
How well is this card supported for it's capture capabilities and dual head?
Capture and dual head are almost totally unsupported without using a proprietary, binary only driver chunk which will soundly place your system as 'unsupported' as far as this list is concerned due to the difficulty of debugging a system when sourceless software bangs the hardware.
If this situation is not ideals for you, I suggest you address the issue with Matrox.
So, which gfx cards are "GPL friendly" ?
Xav
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/
Quoted 1 line · Wakko Warner
How well is this card supported for it's capture capabilities and dual head?
The capture features are undocumented and unsupported (to my knowledge). As far as I have heard, the Rainbow Runner card is not supported in Linux and Matrox has no plans of doing it.
As for the dual monitor...
You need XFree86 4.0.1 or later. Matrox has drivers for 4.0.1. The last time I checked, they did not have anything that compiles under 4.0.2. Dual monitor mode works with xinerama as long as you are at the same resolution and color depth. (I have it working on my machine here. The Matrox driver docs tell how to make it work. It is not hard.)
I have noticed some visual problems on the second screen under 4.0.2. (Ugly, but usable.) Not certain when that will get fixed. Due to Matrox using a proprietary library (HALlib), there is not alot of effort being put into making it work right. (Kind of working in the dark at this point...)
This is more of a question for the xpert list on xfree86.org.
[email protected] | Note to AOL users: for a quick shortcut to reply
Alan Olsen | to my mail, just hit the ctrl, alt and del keys.
"In the future, everything will have its 15 minutes of blame."
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/
Quoted 1 line · Alan Olsen
The capture features are undocumented and unsupported (to my knowledge).
(your knowledge is incorrect.)
Quoted 2 lines
As far as I have heard, the Rainbow Runner card is not supported in Linux and Matrox has no plans of doing it.
Unsupported by whom? Matrox? That would assume they support it under Windows (they barely do -- or used to.) However, you are correct in that Matrox has no intentions of creating Linux drivers for the video capture capabilities of the card. And they are not extremely forthcoming with information -- it would appear both MacroVision and DVDCCA have nukes wired into their offices :-)
Quoted 1 line
This is more of a question for the xpert list on xfree86.org.
Or the marvel list or the livid list...
--Ricky
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/