2.4.{1,2pre1} oops in via82cxxx_audio (?)
I'm not positive that's what's causing the oops but it seems to happen only when I load the sound driver and when esd starts to send a noise to the device. The oops and config are attached below. Let me know if it's funny looking - I typed it in by hand after it killed the machine but it's easily reproducable. Also, while it doesn't seem to be deterministic it happens over 90% of the time
Signature · 3 lines
Matthew Harrell If at first you don't succeed, Bit Twiddlers, Inc. try management. [email protected]
ksymoops 0.7c on i686 2.4.2-pre1. Options used
-v /usr/src/linux/vmlinux (specified)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.2-pre1/ (default)
-m /boot/System.map-2.4.2-pre1 (specified)
Unable to handle kernel NULL pointer reference at virtual address 00000004 d883a0a0 *pde = 00000000 Oops: 0002 CPU: 0 EIP: 0010:<d883a0a0>]
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010206
eax: 40000100 ebx: cff5aa38 ecx: 0000000a edx: 00000000
esi: 00000000 edi: 0000000a ebp: c02b1fa0 esp: c02b1f40
ds: 0018 es: 0018 ss:0018
Process swapper (pid: 0, stackpage=c02b1000)
Stack: 00001111 cff5a800 d883a15f cff5aa38 cca5da80 04000001 c010a2bf 0000000a
cff5a800 c02b1fa0 00000280 c02e7b80 0000000a c02b1f98 c010a43e 0000000a
c02b1fa0 cca5da80 00006f62 c02b0000 c031b820 cca5da80 0008e000 c0108f80
Call Trace: [<d883a15f>] [<c010a2bf>] [<c010a43e>] [<c0108f80>]
[<c01f480a>] [<c01f4620>] [<c0107130>] [<c01071c2>]
[<c0105000>] [<c0100191>]
Code: 89 44 f2 04 ff 43 04 8b 53 2c 89 d0 ff 43 1c 03 43 20 89 43Quoted 1 line
Quoted 1 line
EIP;
d883a0a0<__kstrtab_mod_firmware_load+4fbf/????> <=====
Trace; d883a15f <__kstrtab_mod_firmware_load+507e/????> Trace; c010a2bf <handle_IRQ_event+2f/60> Trace; c010a43e <do_IRQ+6e/b0>
Trace; c0108f80 <ret_from_intr+0/20>
Trace; c01f480a <acpi_idle+1ea/2b0>
Trace; c01f4620 <acpi_idle+0/2b0>
Trace; c0107130 <default_idle+0/30>
Trace; c01071c2 <cpu_idle+42/60>
Trace; c0105000 <empty_bad_page+0/1000>
Trace; c0100191 <L6+0/2>
Code; d883a0a0 <__kstrtab_mod_firmware_load+4fbf/????> 00000000 <_EIP>:
Code; d883a0a0 <__kstrtab_mod_firmware_load+4fbf/????> <=====
0: 89 44 f2 04 mov %eax,0x4(%edx,%esi,8) <=====
Code; d883a0a4 <__kstrtab_mod_firmware_load+4fc3/????>
4: ff 43 04 incl 0x4(%ebx)
Code; d883a0a7 <__kstrtab_mod_firmware_load+4fc6/????>
7: 8b 53 2c mov 0x2c(%ebx),%edx
Code; d883a0aa <__kstrtab_mod_firmware_load+4fc9/????>
a: 89 d0 mov %edx,%eax
Code; d883a0ac <__kstrtab_mod_firmware_load+4fcb/????>
c: ff 43 1c incl 0x1c(%ebx)
Code; d883a0af <__kstrtab_mod_firmware_load+4fce/????>
f: 03 43 20 add 0x20(%ebx),%eax
Code; d883a0b2 <__kstrtab_mod_firmware_load+4fd1/????>
12: 89 43 00 mov %eax,0x0(%ebx)
#
# Automatically generated make config: don't edit
#CONFIG_X86=yCONFIG_ISA=y
# CONFIG_SBUS is not setCONFIG_UID16=y
#
# Code maturity level options
#CONFIG_EXPERIMENTAL=y
#
# Loadable module support
#CONFIG_MODULES=yCONFIG_MODVERSIONS=yCONFIG_KMOD=y
#
# Processor type and features
#
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not setCONFIG_MK7=y
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not setCONFIG_X86_WP_WORKS_OK=yCONFIG_X86_INVLPG=yCONFIG_X86_CMPXCHG=yCONFIG_X86_BSWAP=yCONFIG_X86_POPAD_OK=yCONFIG_X86_L1_CACHE_SHIFT=6CONFIG_X86_TSC=yCONFIG_X86_GOOD_APIC=yCONFIG_X86_USE_3DNOW=yCONFIG_X86_PGE=yCONFIG_X86_USE_PPRO_CHECKSUM=y
# CONFIG_TOSHIBA is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not setCONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not setCONFIG_MTRR=y
# CONFIG_SMP is not setCONFIG_X86_UP_IOAPIC=yCONFIG_X86_IO_APIC=yCONFIG_X86_LOCAL_APIC=y
#
# General setup
#CONFIG_NET=y
# CONFIG_VISWS is not setCONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not setCONFIG_PCI_GOANY=yCONFIG_PCI_BIOS=yCONFIG_PCI_DIRECT=yCONFIG_PCI_NAMES=y
# CONFIG_EISA is not set
# CONFIG_MCA is not setCONFIG_HOTPLUG=y
#
# PCMCIA/CardBus support
#
# CONFIG_PCMCIA is not setCONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not setCONFIG_SYSCTL=yCONFIG_KCORE_ELF=y
# CONFIG_KCORE_AOUT is not setCONFIG_BINFMT_AOUT=mCONFIG_BINFMT_ELF=yCONFIG_BINFMT_MISC=mCONFIG_PM=yCONFIG_ACPI=yCONFIG_APM=y
# CONFIG_APM_IGNORE_USER_SUSPEND is not setCONFIG_APM_DO_ENABLE=yCONFIG_APM_CPU_IDLE=yCONFIG_APM_DISPLAY_BLANK=y
# CONFIG_APM_RTC_IS_GMT is not set
# CONFIG_APM_ALLOW_INTS is not set
# CONFIG_APM_REAL_MODE_POWER_OFF is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#CONFIG_PARPORT=mCONFIG_PARPORT_PC=mCONFIG_PARPORT_PC_FIFO=y
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_AMIGA is not set
# CONFIG_PARPORT_MFC3 is not set
# CONFIG_PARPORT_ATARI is not set
# CONFIG_PARPORT_SUNBPP is not set
# CONFIG_PARPORT_OTHER is not setCONFIG_PARPORT_1284=y
#
# Crypto options
#CONFIG_CRYPTO=yCONFIG_CIPHERS=m
# CONFIG_CIPHER_AES is not set
# CONFIG_CIPHER_RIJNDAEL is not set
#
# AES Finalist Ciphers (128 bit blocksize)
#
# CONFIG_CIPHER_TWOFISH is not set
# CONFIG_CIPHER_MARS is not set
# CONFIG_CIPHER_RC6 is not setCONFIG_CIPHER_SERPENT=m
#
# Other Ciphers submitted as AES Candidates:
#
# CONFIG_CIPHER_DFC is not set
#
# Other ciphers (64 bit blocksize)
#CONFIG_CIPHER_BLOWFISH=mCONFIG_CIPHER_IDEA=m
# CONFIG_CIPHER_RC5 is not set
# CONFIG_CIPHER_DES_EDE3 is not set
# CONFIG_CIPHER_DES is not set
# CONFIG_DIGEST is not set
#
# Plug and Play configuration
#CONFIG_PNP=yCONFIG_ISAPNP=y
#
# Block devices
#CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not setCONFIG_BLK_CPQ_DA=y
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not setCONFIG_LOOP_DEP=mCONFIG_BLK_DEV_LOOP=mCONFIG_BLK_DEV_LOOP_GEN=yCONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
# CONFIG_BLK_DEV_MD is not set
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID5 is not set
# CONFIG_BLK_DEV_LVM is not set
#
# Networking options
#CONFIG_PACKET=mCONFIG_PACKET_MMAP=yCONFIG_NETLINK=yCONFIG_RTNETLINK=yCONFIG_NETLINK_DEV=mCONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not setCONFIG_FILTER=yCONFIG_UNIX=yCONFIG_INET=yCONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not setCONFIG_NET_IPIP=m
# CONFIG_NET_IPGRE is not setCONFIG_IP_MROUTE=y
# CONFIG_IP_PIMSM_V1 is not set
# CONFIG_IP_PIMSM_V2 is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not setCONFIG_SYN_COOKIES=y
#
# IP: Netfilter Configuration
#CONFIG_IP_NF_CONNTRACK=mCONFIG_IP_NF_FTP=mCONFIG_IP_NF_QUEUE=mCONFIG_IP_NF_IPTABLES=mCONFIG_IP_NF_MATCH_LIMIT=mCONFIG_IP_NF_MATCH_MAC=mCONFIG_IP_NF_MATCH_MARK=mCONFIG_IP_NF_MATCH_MULTIPORT=mCONFIG_IP_NF_MATCH_TOS=mCONFIG_IP_NF_MATCH_STATE=mCONFIG_IP_NF_MATCH_UNCLEAN=mCONFIG_IP_NF_MATCH_OWNER=mCONFIG_IP_NF_FILTER=mCONFIG_IP_NF_TARGET_REJECT=mCONFIG_IP_NF_TARGET_MIRROR=mCONFIG_IP_NF_NAT=mCONFIG_IP_NF_NAT_NEEDED=yCONFIG_IP_NF_TARGET_MASQUERADE=mCONFIG_IP_NF_TARGET_REDIRECT=mCONFIG_IP_NF_NAT_FTP=mCONFIG_IP_NF_MANGLE=mCONFIG_IP_NF_TARGET_TOS=mCONFIG_IP_NF_TARGET_MARK=mCONFIG_IP_NF_TARGET_LOG=mCONFIG_IP_NF_COMPAT_IPCHAINS=mCONFIG_IP_NF_NAT_NEEDED=y
# CONFIG_IP_NF_COMPAT_IPFWADM is not set
# CONFIG_IPV6 is not setCONFIG_KHTTPD=m
# CONFIG_ATM is not set
#
#
#
# CONFIG_IPX is not setCONFIG_ATALK=m
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_LLC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
# CONFIG_PHONE_IXJ is not set
#
# ATA/IDE/MFM/RLL support
#CONFIG_IDE=y
#
# IDE, ATA and ATAPI Block devices
#CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives #
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_HD is not set CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_IDEDISK_VENDOR is not set
# CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set
# CONFIG_BLK_DEV_IDEDISK_IBM is not set
# CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set
# CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set
# CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set
# CONFIG_BLK_DEV_IDEDISK_WD is not set
# CONFIG_BLK_DEV_COMMERIAL is not set
# CONFIG_BLK_DEV_TIVO is not set
# CONFIG_BLK_DEV_IDECS is not set CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
#
# IDE chipset support/bugfixes
#
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
# CONFIG_BLK_DEV_ISAPNP is not set
# CONFIG_BLK_DEV_RZ1000 is not setCONFIG_BLK_DEV_IDEPCI=yCONFIG_IDEPCI_SHARE_IRQ=yCONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_OFFBOARD is not setCONFIG_IDEDMA_PCI_AUTO=yCONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_PCI_WIP is not set
# CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_AEC62XX_TUNING is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_WDC_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD7409 is not set
# CONFIG_AMD7409_OVERRIDE is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_HPT34X_AUTODMA is not setCONFIG_BLK_DEV_HPT366=yCONFIG_BLK_DEV_PIIX=yCONFIG_PIIX_TUNING=y
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_PDC202XX is not set
# CONFIG_PDC202XX_BURST is not set
# CONFIG_BLK_DEV_OSB4 is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_CHIPSETS is not setCONFIG_IDEDMA_AUTO=y
# CONFIG_IDEDMA_IVB is not set
# CONFIG_DMA_NONPCI is not setCONFIG_BLK_DEV_IDE_MODES=y
#
# SCSI support
#CONFIG_SCSI=y
#
# SCSI support type (disk, tape, CD-ROM)
#CONFIG_BLK_DEV_SD=yCONFIG_SD_EXTRA_DEVS=40CONFIG_CHR_DEV_ST=m
# CONFIG_CHR_DEV_OSST is not setCONFIG_BLK_DEV_SR=mCONFIG_BLK_DEV_SR_VENDOR=yCONFIG_SR_EXTRA_DEVS=2CONFIG_CHR_DEV_SG=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs #
# CONFIG_SCSI_DEBUG_QUEUES is not set
# CONFIG_SCSI_MULTI_LUN is not set CONFIG_SCSI_CONSTANTS=yCONFIG_SCSI_LOGGING=y
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not setCONFIG_SCSI_AHA152X=m
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AHA1740 is not setCONFIG_SCSI_AIC7XXX=yCONFIG_AIC7XXX_TCQ_ON_BY_DEFAULT=yCONFIG_AIC7XXX_CMDS_PER_DEVICE=8
# CONFIG_AIC7XXX_PROC_STATS is not setCONFIG_AIC7XXX_RESET_DELAY=5
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_DMA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_NCR53C7xx is not setCONFIG_SCSI_NCR53C8XX=m
# CONFIG_SCSI_SYM53C8XX is not setCONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32CONFIG_SCSI_NCR53C8XX_SYNC=20
# CONFIG_SCSI_NCR53C8XX_PROFILE is not set
# CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set
# CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_SIM710 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_DEBUG is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
# CONFIG_I2O_PCI is not set
# CONFIG_I2O_BLOCK is not set
# CONFIG_I2O_LAN is not set
# CONFIG_I2O_SCSI is not set
# CONFIG_I2O_PROC is not set
#
# Network device support
#CONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# Appletalk devices
#
# CONFIG_APPLETALK is not setCONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_ETHERTAP is not set
# CONFIG_NET_SB1000 is not set
#
# Ethernet (10 or 100Mbit)
#CONFIG_NET_ETHERNET=yCONFIG_NET_VENDOR_3COM=y
# CONFIG_EL1 is not set
# CONFIG_EL2 is not set
# CONFIG_ELPLUS is not set
# CONFIG_EL16 is not set
# CONFIG_EL3 is not set
# CONFIG_3C515 is not set
# CONFIG_ELMC is not set
# CONFIG_ELMC_II is not setCONFIG_VORTEX=m
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not setCONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_CS89x0 is not setCONFIG_TULIP=m
# CONFIG_DE4X5 is not set
# CONFIG_DGRS is not set
# CONFIG_DM9102 is not setCONFIG_EEPRO100=mCONFIG_EEPRO100_PM=y
# CONFIG_LNE390 is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_NE3210 is not set
# CONFIG_ES3210 is not setCONFIG_8139TOO=mCONFIG_RTL8129=m
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not setCONFIG_TLAN=m
# CONFIG_VIA_RHINE is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SK98LIN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not setCONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not setCONFIG_PPP_ASYNC=m
# CONFIG_PPP_SYNC_TTY is not setCONFIG_PPP_DEFLATE=mCONFIG_PPP_BSDCOMP=m
# CONFIG_PPPOE is not set
# CONFIG_SLIP is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# IrDA (infrared) support
#CONFIG_IRDA=m
#
# IrDA protocols
#
# CONFIG_IRLAN is not set
# CONFIG_IRNET is not setCONFIG_IRCOMM=m
# CONFIG_IRDA_ULTRA is not setCONFIG_IRDA_OPTIONS=y
#
# IrDA options
#
# CONFIG_IRDA_CACHE_LAST_LSAP is not set
# CONFIG_IRDA_FAST_RR is not set
# CONFIG_IRDA_DEBUG is not set
#
# Infrared-port device drivers
#
#
# SIR device drivers
#CONFIG_IRTTY_SIR=mCONFIG_IRPORT_SIR=m
#
# FIR device drivers
#
# CONFIG_NSC_FIR is not set
# CONFIG_WINBOND_FIR is not set
# CONFIG_TOSHIBA_FIR is not setCONFIG_SMC_IRCC_FIR=m
#
# Dongle support
#
# CONFIG_DONGLE is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Input core support
#CONFIG_INPUT=yCONFIG_INPUT_KEYBDEV=yCONFIG_INPUT_MOUSEDEV=yCONFIG_INPUT_MOUSEDEV_SCREEN_X=1024CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768CONFIG_INPUT_JOYDEV=mCONFIG_INPUT_EVDEV=m
#
# Character devices
#CONFIG_VT=yCONFIG_VT_CONSOLE=yCONFIG_SERIAL=yCONFIG_SERIAL_CONSOLE=yCONFIG_SERIAL_EXTENDED=y
# CONFIG_SERIAL_MANY_PORTS is not setCONFIG_SERIAL_SHARE_IRQ=y
# CONFIG_SERIAL_DETECT_IRQ is not set
# CONFIG_SERIAL_MULTIPORT is not set
# CONFIG_HUB6 is not set
# CONFIG_SERIAL_NONSTANDARD is not setCONFIG_UNIX98_PTYS=yCONFIG_UNIX98_PTY_COUNT=256CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
#
# I2C support
#CONFIG_I2C=m
# CONFIG_I2C_ALGOBIT is not set
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_CHARDEV is not set
#
# Mice
#
# CONFIG_BUSMOUSE is not setCONFIG_MOUSE=yCONFIG_PSMOUSE=y
# CONFIG_82C710_MOUSE is not set
# CONFIG_PC110_PAD is not set
#
# Joysticks
#
# CONFIG_JOYSTICK is not set
#
# Input core support is needed for joysticks
#
# CONFIG_QIC02_TAPE is not set
#
# Watchdog Cards
#CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not setCONFIG_SOFT_WATCHDOG=m
# CONFIG_WDT is not set
# CONFIG_WDTPCI is not set
# CONFIG_PCWATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_MIXCOMWD is not set
# CONFIG_I810_TCO is not set
# CONFIG_INTEL_RNG is not setCONFIG_NVRAM=mCONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not setCONFIG_AGP=m
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_I810 is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_ALI is not setCONFIG_DRM=yCONFIG_DRM_TDFX=m
# CONFIG_DRM_GAMMA is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_MGA is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# File systems
#
# CONFIG_QUOTA is not setCONFIG_AUTOFS_FS=mCONFIG_AUTOFS4_FS=mCONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_ADFS_FS is not set
# CONFIG_ADFS_FS_RW is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BFS_FS is not setCONFIG_FAT_FS=mCONFIG_MSDOS_FS=m
# CONFIG_UMSDOS_FS is not setCONFIG_VFAT_FS=m
# CONFIG_EFS_FS is not set
# CONFIG_JFFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_RAMFS is not setCONFIG_ISO9660_FS=mCONFIG_JOLIET=y
# CONFIG_MINIX_FS is not setCONFIG_NTFS_FS=mCONFIG_NTFS_RW=y
# CONFIG_HPFS_FS is not setCONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVFS_MOUNT is not set
# CONFIG_DEVFS_DEBUG is not setCONFIG_DEVPTS_FS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX4FS_RW is not set
# CONFIG_ROMFS_FS is not setCONFIG_EXT2_FS=y
# CONFIG_SYSV_FS is not set
# CONFIG_SYSV_FS_WRITE is not setCONFIG_UDF_FS=mCONFIG_UDF_RW=yCONFIG_UFS_FS=mCONFIG_UFS_FS_WRITE=y
#
# Network File Systems
#
# CONFIG_CODA_FS is not setCONFIG_NFS_FS=mCONFIG_NFS_V3=y
# CONFIG_ROOT_NFS is not setCONFIG_NFSD=yCONFIG_NFSD_V3=yCONFIG_SUNRPC=yCONFIG_LOCKD=yCONFIG_LOCKD_V4=yCONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_NCP_FS is not set
# CONFIG_NCPFS_PACKET_SIGNING is not set
# CONFIG_NCPFS_IOCTL_LOCKING is not set
# CONFIG_NCPFS_STRONG is not set
# CONFIG_NCPFS_NFS_NS is not set
# CONFIG_NCPFS_OS2_NS is not set
# CONFIG_NCPFS_SMALLDOS is not set
# CONFIG_NCPFS_NLS is not set
# CONFIG_NCPFS_EXTRAS is not set
#
# Partition Types
#CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not setCONFIG_MSDOS_PARTITION=yCONFIG_BSD_DISKLABEL=y
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not setCONFIG_SMB_NLS=yCONFIG_NLS=y
#
# Native Language Support
#CONFIG_NLS_DEFAULT="iso8859-1"CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_950 is not setCONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_UTF8 is not set
#
# Console drivers
#CONFIG_VGA_CONSOLE=yCONFIG_VIDEO_SELECT=y
# CONFIG_MDA_CONSOLE is not set
#
# Frame-buffer support
#CONFIG_FB=yCONFIG_DUMMY_CONSOLE=y
# CONFIG_FB_RIVA is not set
# CONFIG_FB_CLGEN is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not setCONFIG_FB_VESA=y
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_HGA is not setCONFIG_VIDEO_SELECT=y
# CONFIG_FB_MATROX is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FBCON_ADVANCED is not setCONFIG_FBCON_CFB8=yCONFIG_FBCON_CFB16=yCONFIG_FBCON_CFB24=yCONFIG_FBCON_CFB32=y
# CONFIG_FBCON_FONTWIDTH8_ONLY is not set
# CONFIG_FBCON_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Sound
#CONFIG_SOUND=m
# CONFIG_SOUND_CMPCI is not set
# CONFIG_SOUND_EMU10K1 is not set
# CONFIG_SOUND_FUSION is not set
# CONFIG_SOUND_CS4281 is not set
# CONFIG_SOUND_ES1370 is not set
# CONFIG_SOUND_ES1371 is not set
# CONFIG_SOUND_ESSSOLO1 is not setCONFIG_SOUND_MAESTRO=m
# CONFIG_SOUND_SONICVIBES is not set
# CONFIG_SOUND_TRIDENT is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not setCONFIG_SOUND_VIA82CXXX=mCONFIG_SOUND_OSS=m
# CONFIG_SOUND_TRACEINIT is not set
# CONFIG_SOUND_DMAP is not set
# CONFIG_SOUND_AD1816 is not set
# CONFIG_SOUND_SGALAXY is not set
# CONFIG_SOUND_ADLIB is not set
# CONFIG_SOUND_ACI_MIXER is not setCONFIG_SOUND_CS4232=m
# CONFIG_SOUND_SSCAPE is not set
# CONFIG_SOUND_GUS is not set
# CONFIG_SOUND_ICH is not set
# CONFIG_SOUND_VMIDI is not set
# CONFIG_SOUND_TRIX is not set
# CONFIG_SOUND_MSS is not set
# CONFIG_SOUND_MPU401 is not set
# CONFIG_SOUND_NM256 is not set
# CONFIG_SOUND_MAD16 is not set
# CONFIG_SOUND_PAS is not set
# CONFIG_PAS_JOYSTICK is not set
# CONFIG_SOUND_PSS is not setCONFIG_SOUND_SB=m
# CONFIG_SOUND_AWE32_SYNTH is not set
# CONFIG_SOUND_WAVEFRONT is not set
# CONFIG_SOUND_MAUI is not setCONFIG_SOUND_YM3812=m
# CONFIG_SOUND_OPL3SA1 is not set
# CONFIG_SOUND_OPL3SA2 is not set
# CONFIG_SOUND_YMFPCI is not set
# CONFIG_SOUND_UART6850 is not set
# CONFIG_SOUND_AEDSP16 is not set
# CONFIG_SOUND_TVMIXER is not set
#
# USB support
#CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
#
# USB Controllers
#CONFIG_USB_UHCI=y
# CONFIG_USB_OHCI is not set
#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH is not setCONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# USB Human Interface Devices (HID)
#CONFIG_USB_HID=y
# CONFIG_USB_WACOM is not set
#
# USB Imaging devices
#
# CONFIG_USB_DC2XX is not set
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_SCANNER is not set
# CONFIG_USB_MICROTEK is not set
#
# USB Multimedia devices
#
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_DSBR is not set
# CONFIG_USB_DABUSB is not set
#
# USB Network adaptors
#
# CONFIG_USB_PLUSB is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_NET1080 is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#CONFIG_USB_SERIAL=m
# CONFIG_USB_SERIAL_DEBUG is not setCONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not setCONFIG_USB_SERIAL_VISOR=m
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_OMNINET is not set
#
# USB misc drivers
#
# CONFIG_USB_RIO500 is not set
#
# Kernel hacking
#CONFIG_MAGIC_SYSRQ=y
: I'm not positive that's what's causing the oops but it seems to happen only : when I load the sound driver and when esd starts to send a noise to the device. : The oops and config are attached below. Let me know if it's funny looking - : I typed it in by hand after it killed the machine but it's easily reproducable. : Also, while it doesn't seem to be deterministic it happens over 90% of the time
Just realized that some of those symbols were defined in the via82cxxx_audio module and I needed to load it to get them recognized. As long as I don't play any sounds the module will load fine so here is the new and improved ksymoops output
Signature · 3 lines
Matthew Harrell Behind every great computer sits Bit Twiddlers, Inc. a skinny little geek. [email protected]
ksymoops 0.7c on i686 2.4.2-pre1. Options used
-v /usr/src/linux/vmlinux (specified)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.2-pre1/ (default)
-m /boot/System.map-2.4.2-pre1 (specified)
Unable to handle kernel NULL pointer reference at virtual address 00000004 d883a0a0 *pde = 00000000 Oops: 0002 CPU: 0 EIP: 0010:<d883a0a0>]
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010206
eax: 40000100 ebx: cff5aa38 ecx: 0000000a edx: 00000000
esi: 00000000 edi: 0000000a ebp: c02b1fa0 esp: c02b1f40
ds: 0018 es: 0018 ss:0018
Process swapper (pid: 0, stackpage=c02b1000)
Stack: 00001111 cff5a800 d883a15f cff5aa38 cca5da80 04000001 c010a2bf 0000000a
cff5a800 c02b1fa0 00000280 c02e7b80 0000000a c02b1f98 c010a43e 0000000a
c02b1fa0 cca5da80 00006f62 c02b0000 c031b820 cca5da80 0008e000 c0108f80
Call Trace: [<d883a15f>] [<c010a2bf>] [<c010a43e>] [<c0108f80>]
[<c01f480a>] [<c01f4620>] [<c0107130>] [<c01071c2>]
[<c0105000>] [<c0100191>]
Code: 89 44 f2 04 ff 43 04 8b 53 2c 89 d0 ff 43 1c 03 43 20 89 43Quoted 1 line
Quoted 1 line
EIP;
d883a0a0<[via82cxxx_audio]via_intr_channel+90/120> <=====
Trace; d883a15f <[via82cxxx_audio]via_interrupt+2f/70> Trace; c010a2bf <handle_IRQ_event+2f/60>
Trace; c010a43e <do_IRQ+6e/b0>
Trace; c0108f80 <ret_from_intr+0/20>
Trace; c01f480a <acpi_idle+1ea/2b0>
Trace; c01f4620 <acpi_idle+0/2b0>
Trace; c0107130 <default_idle+0/30>
Trace; c01071c2 <cpu_idle+42/60>
Trace; c0105000 <empty_bad_page+0/1000>
Trace; c0100191 <L6+0/2>
Code; d883a0a0 <[via82cxxx_audio]via_intr_channel+90/120> 00000000 <_EIP>:
Code; d883a0a0 <[via82cxxx_audio]via_intr_channel+90/120> <=====
0: 89 44 f2 04 mov %eax,0x4(%edx,%esi,8) <=====
Code; d883a0a4 <[via82cxxx_audio]via_intr_channel+94/120>
4: ff 43 04 incl 0x4(%ebx)
Code; d883a0a7 <[via82cxxx_audio]via_intr_channel+97/120>
7: 8b 53 2c mov 0x2c(%ebx),%edx
Code; d883a0aa <[via82cxxx_audio]via_intr_channel+9a/120>
a: 89 d0 mov %edx,%eax
Code; d883a0ac <[via82cxxx_audio]via_intr_channel+9c/120>
c: ff 43 1c incl 0x1c(%ebx)
Code; d883a0af <[via82cxxx_audio]via_intr_channel+9f/120>
f: 03 43 20 add 0x20(%ebx),%eax
Code; d883a0b2 <[via82cxxx_audio]via_intr_channel+a2/120>
12: 89 43 00 mov %eax,0x0(%ebx)
Quoted 21 lines
Quoted 20 lines
Just realized that some of those symbols were defined in the
via82cxxx_audiomodule and I needed to load it to get them recognized. As long as I don't play any sounds the module will load fine so here is the new and improved ksymoops outputQuoted 1 line
Quoted 1 line
EIP;
d883a0a0<[via82cxxx_audio]via_intr_channel+90/120> <=====Trace;
d883a15f<[via82cxxx_audio]via_interrupt+2f/70> Trace;c010a2bf<handle_IRQ_event+2f/60>
Trace;c010a43e<do_IRQ+6e/b0>
Trace;c0108f80<ret_from_intr+0/20>
Trace;c01f480a<acpi_idle+1ea/2b0>
Trace;c01f4620<acpi_idle+0/2b0>
Trace;c0107130<default_idle+0/30>
Trace;c01071c2<cpu_idle+42/60>
Trace;c0105000<empty_bad_page+0/1000>
Trace;c0100191<L6+0/2>
Code;d883a0a0<[via82cxxx_audio]via_intr_channel+90/120> 00000000 <_EIP>:
Code;d883a0a0<[via82cxxx_audio]via_intr_channel+90/120> <=====
0: 89 44 f2 04 mov %eax,0x4(%edx,%esi,8) <=====
Ouch. After applying the attached patch, do any of the assertions trigger? (You should get a message 'Assertion failed! ...' right before the oops)
Jeff
Signature · 3 lines
Jeff Garzik | "You see, in this world there's two kinds of Building 1024 | people, my friend: Those with loaded guns MandrakeSoft | and those who dig. You dig." --Blondie
Index: drivers/sound/via82cxxx_audio.c
===================================================================
RCS file: /cvsroot/gkernel/linux_2_4/drivers/sound/via82cxxx_audio.c,v retrieving revision 1.1.1.11.2.1
sound/via82cxxx_audio.c +5 -0
@@ -1649,6 +1649,9 @@u8 status;int n; +assert (chan !=NULL ); +assert (chan->sgtable !=NULL ); +/* check pertinent bits of status register for action bits */ status =inb (chan->iobase) & (VIA_SGD_FLAG |VIA_SGD_EOL |VIA_SGD_STOPPED );if (!status)
@@ -1728,6 +1731,8 @@ {struct via_info *card = dev_id;u32 status32; + +assert (card !=NULL );/* to minimize interrupt sharing costs, we use the SGD status * shadow register to check the status of all inputs and
: Ouch. After applying the attached patch, do any of the assertions : trigger? (You should get a message 'Assertion failed! ...' right before : the oops)
: + assert (chan->sgtable != NULL);
Yep, I get this one "chan->sgtable != NULL". I have no idea what this means but I got it one out of the two times I tried.
Signature · 7 lines
Matthew Harrell Every morning is the dawn of a Bit Twiddlers, Inc. new error. [email protected] - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] Please read the FAQ at http://www.tux.org/lkml/