Skip to contentSkip to conversation

VIA silent disk corruption - bad news

DISCUSSION Peter Horton 3 participants 4 messages Feb 5, 2001 – Feb 6, 2001

lore
Share & tools
lore
#0 lore raw

The patch doesn't work for me. Maybe I need to disable some more of those North bridge features :-(

Oh bum. Back to testing with "normal" ...

P.

----- CORRUPTING SETUP -----

00:00.0 Host bridge: VIA Technologies, Inc.: Unknown device 0305 (rev 02)
Subsystem: Asustek Computer, Inc.: Unknown device 8033
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR+
Latency: 0 set
Region 0: Memory at e4000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW- Rate=421
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=
Capabilities: [c0] Power Management version 2
Flags: PMEClk- AuxPwr- DSI- D1- D2- PME-
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 06 11 05 03 06 00 10 a2 02 00 00 06 00 00 00 00
10: 08 00 00 e4 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 33 80
30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 17 a4 6b b4 4f 81 08 08 80 00 04 08 08 08 08 08
60: 03 ff 00 a0 52 e5 e5 00 44 7c 86 0f 08 3f 00 00
70: de 80 cc 0c 0e a1 d2 00 01 b4 11 02 00 00 00 00
80: 0f 40 00 00 c0 00 00 00 02 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 02 c0 20 00 07 02 00 1f 00 00 00 00 6e 02 04 00
b0: 59 ec 80 b5 32 33 28 00 00 00 00 00 00 00 00 00
c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 0e 22 00 00 00 00 00 91 06

----- DIFF FOR NON-CORRUPTING SETUP -----

@@ -5,7 +5,7 @@
Latency: 0 set
Region 0: Memory at e4000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 2.0
- Status: RQ=31 SBA+ 64bit- FW- Rate=421
+ Status: RQ=31 SBA+ 64bit- FW- Rate=21
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=
Capabilities: [c0] Power Management version 2
Flags: PMEClk- AuxPwr- DSI- D1- D2- PME-
@@ -15,12 +15,12 @@
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 33 80
30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-50: 17 a4 6b b4 4f 81 08 08 80 00 04 08 08 08 08 08
-60: 03 ff 00 a0 52 e5 e5 00 44 7c 86 0f 08 3f 00 00
-70: de 80 cc 0c 0e a1 d2 00 01 b4 11 02 00 00 00 00
+50: 17 a4 6b b4 06 81 08 08 80 00 04 08 08 08 08 08
+60: 03 ff 00 a0 50 e4 e4 00 40 78 86 0f 08 3f 00 00
+70: d8 80 cc 0c 0e a1 d2 00 01 b4 01 02 00 00 00 00
80: 0f 40 00 00 c0 00 00 00 02 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-a0: 02 c0 20 00 07 02 00 1f 00 00 00 00 6e 02 04 00
+a0: 02 c0 20 00 03 02 00 1f 00 00 00 00 6e 02 00 00
b0: 59 ec 80 b5 32 33 28 00 00 00 00 00 00 00 00 00
c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/

#1 lore raw
Quoted 5 lines · Peter Horton

The patch doesn't work for me. Maybe I need to disable some more of those North bridge features :-(

Oh bum. Back to testing with "normal" ...

FWIW, here's the output of my lspci for A7V with working 1003 BIOS and still no corruption (after 2 hours stresstest).

00:00.0 Host bridge: VIA Technologies, Inc.: Unknown device 0305 (rev 02)
Subsystem: Asustek Computer, Inc.: Unknown device 8033
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR+
Latency: 0
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M]
Capabilities: [a0] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW+ Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 06 11 05 03 06 00 10 a2 02 00 00 06 00 00 00 00
10: 08 00 00 e0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 33 80
30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00

I'll leave the comparing work to you. If you need more info, just holler.

-Udo.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/

#2 lore raw
Quoted 27 lines · Udo A. Steinberg
Quoted 5 lines · Peter Horton

The patch doesn't work for me. Maybe I need to disable some more of those North bridge features :-(

Oh bum. Back to testing with "normal" ...

FWIW, here's the output of my lspci for A7V with working 1003 BIOS and still no corruption (after 2 hours stresstest).

00:00.0 Host bridge: VIA Technologies, Inc.: Unknown device 0305 (rev 02)
Subsystem: Asustek Computer, Inc.: Unknown device 8033
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR+
Latency: 0
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M]
Capabilities: [a0] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW+ Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 06 11 05 03 06 00 10 a2 02 00 00 06 00 00 00 00
10: 08 00 00 e0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 33 80
30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00

Quoted 3 lines

I'll leave the comparing work to you. If you need more info, just holler.

-Udo.

I have found a way to create the file-system problem! Just build the kernel and, from another terminal execute sync. The build will fail with multiple errors caused by corrupted files. The files are not actually corrupted, though. Just restart the build and it will complete.

So there is something that sync triggers that results in apparent file system corruption. Once files are re-read, they are fine. This does not explain the permanent file-system corruption that sometimes occurs --that may occur during the umount.

I don't use IDE. I use BusLogic SCSI, 250 Mb RAM, Pentium-III(2), SMP. Linux 2.4.1 (no postfix).

PCI stuff.....

Device Vendor Type
0 Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge

       I/O memory : 0xe6000000->0xe7fffff7
   1   Intel Corporation              440BX/ZX - 82443BX/ZX AGP bridge   
       I/O memory : 0x40010100->0x470101ff
       I/O memory : 0x22a0d0e0->0x1fffdfef
       I/O memory : 0xe5c0e5d0->0xe5cfe5df
       I/O memory : 0xe5f0e600->0xe5ffe60f
   4   Intel Corporation              82371AB PIIX4 ISA                  
   9   S3 Inc.                        86c968 [Vision 968 VRAM] rev 0     
       IRQ 15 Pin 1
       I/O memory : 0x14000000->0x15ffffff
  10   Advanced Micro Devices [AMD]   79c970 [PCnet LANCE]               
       IRQ 12 Pin 1
       I/O  ports : 0xd000->0xd01e
       I/O memory : 0xe1800000->0xe180001f
  11   3Com Corporation               3c905B 100BaseTX [Cyclone]         
       IRQ 10 Pin 1
       I/O  ports : 0xb800->0xb87e
       I/O memory : 0xe1000000->0xe100007f
  12   BusLogic                       BT-946C (BA80C30), [MultiMaster 10]
       IRQ 11 Pin 1
       I/O  ports : 0xb400->0xb402
       I/O memory : 0xe0800000->0xe0800fff

Cheers,
Dick Johnson

Penguin : Linux version 2.4.1 on an i686 machine (799.53 BogoMips).

"Memory is like gasoline. You use it up when you are running. Of course you get it all back when you reboot..."; Actual explanation obtained from the Micro$oft help desk.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/

#3 lore raw
In reply to Peter Horton
Quoted 3 lines · Udo A. Steinberg

FWIW, here's the output of my lspci for A7V with working 1003 BIOS and still no corruption (after 2 hours stresstest).

Bugger, forgot the end bit. Here's it again:

00:00.0 Host bridge: VIA Technologies, Inc.: Unknown device 0305 (rev 02)
Subsystem: Asustek Computer, Inc.: Unknown device 8033
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR+
Latency: 0
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M]
Capabilities: [a0] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW+ Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 06 11 05 03 06 00 10 a2 02 00 00 06 00 00 00 00
10: 08 00 00 e0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 33 80
30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 17 a4 eb b4 06 81 10 10 88 00 04 08 0c 10 10 10
60: 0f ff 0f b0 e6 e6 e5 00 40 78 86 0f 08 7f 00 00
70: de c0 cc 0c 0e a1 d2 00 01 b4 11 02 00 00 00 01
80: 0f 40 00 00 80 00 00 00 03 00 4c 01 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 02 c0 20 00 17 02 00 1f 00 00 00 00 6a 02 14 00
b0: 5a ec 80 a5 32 33 28 00 00 00 00 00 00 00 00 00
c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 0e 22 00 00 00 00 00 91 06

-Udo.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/