Skip to contentSkip to conversation

ATAPI CDRW which doesn't work

DISCUSSION [email protected] 12 participants 23 messages Feb 3, 2001 – Feb 12, 2001

lore
Share & tools
lore
#0 lore raw

Hi,

I've never could make this CDRW ATAPI to work, if someone could provide me any clue about the baby. I just said that people on the kernel mailing list may care of its but. It looks like the baby didn't even noticed. ;-)

kernel is 2.4.1, but never worked even before this release. Never maintained speed.

Thanks in advance for any reply,

Patrick Mourlhon

----mount atapi cd writer outpu

Line:/mnt/home/pmo# mount /dev/hdb /cdrom
/dev/hdb: Input/output error
mount: block device /dev/hdb is write-protected, mounting read-only
/dev/hdb: Input/output error

mount: you must specify the filesystem type
Line:/mnt/home/pmo#

----/var/log/messages from start to the end of the previous mount command

Feb  3 22:08:25 Line kernel: hdb: irq timeout: status=0xd0 { Busy }
Feb  3 22:08:25 Line kernel: hdb: DMA disabled
Feb  3 22:08:55 Line kernel: hdb: ATAPI reset timed-out, status=0x90
Feb  3 22:08:55 Line kernel: hda: DMA disabled
Feb  3 22:08:55 Line kernel: ide0: reset: success
Feb  3 22:09:06 Line kernel: hdb: irq timeout: status=0x90 { Busy }
Feb  3 22:09:36 Line kernel: hdb: ATAPI reset timed-out, status=0x90
Feb  3 22:09:36 Line kernel: ide0: reset: success
Feb  3 22:09:47 Line kernel: hdb: irq timeout: status=0x90 { Busy }
Feb  3 22:09:47 Line kernel: end_request: I/O error, dev 03:40 (hdb), sector 2
Feb  3 22:09:48 Line kernel: hdb: status timeout: status=0x90 { Busy }
Feb  3 22:09:48 Line kernel: hdb: drive not ready for command
Feb  3 22:10:11 Line kernel: hdb: ATAPI reset complete
Feb  3 22:10:21 Line kernel: hdb: irq timeout: status=0xd0 { Busy }
Feb  3 22:10:51 Line kernel: hdb: ATAPI reset timed-out, status=0x90
Feb  3 22:10:51 Line kernel: ide0: reset: success
Feb  3 22:11:02 Line kernel: hdb: irq timeout: status=0x90 { Busy }
Feb  3 22:11:32 Line kernel: hdb: ATAPI reset timed-out, status=0x90
Feb  3 22:11:32 Line kernel: ide0: reset: success
Feb  3 22:11:42 Line kernel: hdb: irq timeout: status=0x90 { Busy }
Feb  3 22:11:42 Line kernel: end_request: I/O error, dev 03:40 (hdb), sector 2
Feb  3 22:11:43 Line kernel: hdb: status timeout: status=0x90 { Busy }
Feb  3 22:11:43 Line kernel: hdb: drive not ready for command
Feb  3 22:12:06 Line kernel: hdb: ATAPI reset complete
Feb  3 22:12:16 Line kernel: hdb: irq timeout: status=0xd0 { Busy }
Feb  3 22:12:46 Line kernel: hdb: ATAPI reset timed-out, status=0x90
Feb  3 22:12:46 Line kernel: ide0: reset: success
Feb  3 22:12:57 Line kernel: hdb: irq timeout: status=0x90 { Busy }
Feb  3 22:13:27 Line kernel: hdb: ATAPI reset timed-out, status=0x90
Feb  3 22:13:27 Line kernel: ide0: reset: success
Feb  3 22:13:37 Line kernel: hdb: irq timeout: status=0x90 { Busy }
Feb  3 22:13:37 Line kernel: end_request: I/O error, dev 03:40 (hdb), sector 0
Feb  3 22:13:37 Line kernel: FAT bread failed
Feb  3 22:13:38 Line kernel: hdb: status timeout: status=0x90 { Busy }
Feb  3 22:13:38 Line kernel: hdb: drive not ready for command
Feb  3 22:14:02 Line kernel: hdb: ATAPI reset complete
Feb  3 22:14:12 Line kernel: hdb: irq timeout: status=0xd0 { Busy }
Feb  3 22:14:42 Line kernel: hdb: ATAPI reset timed-out, status=0x90
Feb  3 22:14:42 Line kernel: ide0: reset: success
Feb  3 22:14:53 Line kernel: hdb: irq timeout: status=0x90 { Busy }
Feb  3 22:15:23 Line kernel: hdb: ATAPI reset timed-out, status=0x90
Feb  3 22:15:23 Line kernel: ide0: reset: success
Feb  3 22:15:33 Line kernel: hdb: irq timeout: status=0x90 { Busy }
Feb  3 22:15:33 Line kernel: end_request: I/O error, dev 03:40 (hdb), sector 0
Feb  3 22:15:33 Line kernel: FAT bread failed
Feb  3 22:15:35 Line kernel: hdb: status timeout: status=0x90 { Busy }
Feb  3 22:15:35 Line kernel: hdb: drive not ready for command
Feb  3 22:16:09 Line kernel: hdb: ATAPI reset timed-out, status=0x90
Feb  3 22:16:09 Line kernel: ide0: reset: success
Feb  3 22:16:12 Line kernel: hdb: packet command error: status=0x51 { DriveReady SeekComplete Error }
Feb  3 22:16:12 Line kernel: hdb: packet command error: error=0xb0
Feb  3 22:16:13 Line kernel: ATAPI device hdb:
Feb  3 22:16:13 Line kernel:   Error: Aborted command -- (Sense key=0x0b)
Feb  3 22:16:13 Line kernel:   (reserved error code) -- (asc=0x00, ascq=0x00)
Feb  3 22:16:13 Line kernel:   The failed "Prevent/Allow Medium Removal" packet command was:
Feb  3 22:16:13 Line kernel:   "1e 00 00 00 00 00 00 00 00 00 00 00 "

----cat /proc/interrupts

CPU0

  0:     147746          XT-PIC  timer
  1:          2          XT-PIC  keyboard
  2:          0          XT-PIC  cascade
  4:          0          XT-PIC  serial
 10:          0          XT-PIC  usb-uhci
 12:       3622          XT-PIC  PCnet/PCI II 79C970A
 14:      11727          XT-PIC  ide0
 15:        127          XT-PIC  ide1
NMI:          0
LOC:          0
ERR:          0

----cat /proc/ioports

0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(set)
0376-0376 : ide1
0378-037a : parport0
037b-037f : parport0
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(set)
0cf8-0cff : PCI conf1
5000-50ff : VIA Technologies, Inc. VT82C586B ACPI d000-dfff : PCI Bus #01
d000-d0ff : ATI Technologies Inc Rage XL AGP
e000-e00f : VIA Technologies, Inc. Bus Master IDE
e000-e007 : ide0
e008-e00f : ide1
e400-e41f : VIA Technologies, Inc. UHCI USB
e400-e41f : usb-uhci
e800-e8ff : Tseng Labs Inc ET6000
ec00-ec1f : Advanced Micro Devices [AMD] 79c970 [PCnet LANCE]
ec00-ec1f : PCnet/PCI II 79C970A

----/proc/ide/ide0/hdb

Line:/proc/ide/ide0/hdb# cat media
cdrom
Line:/proc/ide/ide0/hdb# cat model
R/RW 4x4x24
Line:/proc/ide/ide0/hdb# cat driver
ide-cdrom version 4.59
Line:/proc/ide/ide0/hdb# cat settings
name        value    min      max      mode
----        -----    ---      ---      ----
breada_readahead        4               0               127             rw
current_speed           34              0               69              rw
dsc_overlap             1               0               1               rw
file_readahead          0               0               2097151         rw
ide_scsi                0               0               1               rw
init_speed              12              0               69              rw
io_32bit                0               0               3               rw
keepsettings            0               0               1               rw
max_kb_per_request      128             1               127             rw
nice1                   1               0               1               rw
number                  1               0               3               rw
pio_mode                write-only      0               255             w
slow                    0               0               1               rw
unmaskirq               0               0               1               rw
using_dma               0               0               1               rw
Line:/proc/ide/ide0/hdb# cat identify
85c0 0000 0000 0000 0000 0000 0000 0000
0000 0000 3456 4f30 3934 3544 4530 3530
3232 2020 0000 0000 0000 1000 0000 2031
2e30 3400 0000 522f 5257 2034 7834 7832
3420 2020 2020 2020 2020 2020 2020 2020
2020 2020 2020 2020 2020 2020 2020 0000
0000 0b00 0000 0200 0200 0002 0000 0000
0000 0000 0000 0000 0000 0000 0007 0407
0003 0078 0078 0078 0078 0000 0000 0000
0000 0004 0009 0000 0000 0000 0000 0000
...

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/

#1 lore raw
Quoted 6 lines · On Sat, Feb 03, 2001 at 11:05:44PM +0100, [email protected] wrote:

Hi,

I've never could make this CDRW ATAPI to work, if someone could provide me any clue about the baby. I just said that people on the kernel mailing list may care of its but. It looks like the baby didn't even noticed. ;-)

Compile in options 'SCSI generic', 'SCSI cdrom and 'SCSI emulation support' then add 'hdb=scsi' to kernel parameters.

Now you can use it as SCSI cdrom, and cd-writers recognize it too. Eg. for cdrecord you should probably put 'dev=0,0,0' to command line (I assume you have no other SCSI controller).

Signature · 6 lines
marko

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/
#2 lore raw
Quoted 3 lines · Marko Kreen

On Sat, Feb 03, 2001 at 11:05:44PM +0100, [email protected] wrote:
Compile in options 'SCSI generic', 'SCSI cdrom and 'SCSI emulation support' then add 'hdb=scsi' to kernel parameters.

is there someone working on direct support for Atapi-cdrw this time? i would like to use a clean solution and am ready to help testing such stuff (if existing) with my yamaha atapi-cdrw connected to an asus a7v

regards

roh

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/

#3 lore raw

AW: ATAPI CDRW which doesn't work -> devfs problems

Hi
I was trying to burn cds under linux-2.4.1 with devFS enabled. But x-cd-roast (and also cdrecord) do not find any scsi drives. I guess they have been renamed or something like that, I cannot find them in /dev, nor anywhere in /dev/scsi ...
Oh, and could anybody tell me, how I stop RH7 creating /dev/lp* every time I boot ? I don't use devices attached to lp* ....

thanks & greetings,
Friedrich

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/

#4 lore raw

AW: ATAPI CDRW which doesn't work -> devfs problems part2

-----Ursprüngliche Nachricht-----
Von: [email protected] [mailto:[email protected]]Im Auftrag von Friedrich Lindenberg
Gesendet: Sonntag, 4. Februar 2001 11:36
An: [email protected]
Betreff: AW: ATAPI CDRW which doesn't work -> devfs problems

Hi
I was trying to burn cds under linux-2.4.1 with devFS enabled. But x-cd-roast (and also cdrecord) do not find any scsi drives.

    I AM USING hdd=ide-scsi && hdc=ide-scsi !!!

I guess they have been
renamed or something like that, I cannot find them in /dev, nor anywhere in /dev/scsi ...
Oh, and could anybody tell me, how I stop RH7 creating /dev/lp* every time I boot ? I don't use devices attached to lp* ....

thanks & greetings,
Friedrich

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/

#5 lore raw
In reply to Marko Kreen
Quoted 6 lines · Joachim 'roh' Steiger
Quoted 2 lines · Marko Kreen

Compile in options 'SCSI generic', 'SCSI cdrom and 'SCSI emulation support' then add 'hdb=scsi' to kernel parameters.

is there someone working on direct support for Atapi-cdrw this time? i would like to use a clean solution and am ready to help testing such stuff (if existing) with my yamaha atapi-cdrw connected to an asus a7v

I guess the kernel does not care, the problem is the user-space utilities want to spek SCSI. You could contact the developers of cdwriter or cdrecord I guess.

Signature · 6 lines
marko

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/
#6 lore raw
In reply to [email protected]
Quoted 10 lines
Quoted 3 lines

I've got those kind of message now :

Feb  4 07:18:35 Line kernel: scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0, lun 0 Read (10) 00 00 00 00 2e 00 00 01 00 

If this is a correct ISO9660 cd you should not see those messages. It is either hardware problem (eg IDE cable is badly conencted or CDRW is broken/dusty) or this CD is simply scratched. Does it work with another CD?

Also try to put it on separate IDE channel than your main HD.

Cable looks ok, removed and reinstalled, used it before with a second hard disk. CDRW may be broken. don't know, but at least nothing appear broken all around the device. CD was read with an other CDROM reader.
Never seen CDRW working reliably till now. But never used it through Windows, don't have it since 4 years. I might at least check if it could work on Windows.

Whatever thanks a lot for your time, was greatly appreciated,

patrick
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/

#7 lore raw
In reply to [email protected]
Quoted 4 lines · On Sat, Feb 03 2001, [email protected] wrote:
Feb  3 22:08:25 Line kernel: hdb: irq timeout: status=0xd0 { Busy }
Feb  3 22:08:25 Line kernel: hdb: DMA disabled
Feb  3 22:08:55 Line kernel: hdb: ATAPI reset timed-out, status=0x90
Feb  3 22:08:55 Line kernel: hda: DMA disabled

Try disabling DMA on the drive before accessing it.

Signature · 6 lines
Jens Axboe

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/
#8 lore raw

Slowing down CDROM drives (was: Re: ATAPI CDRW which doesn't work)

In reply to [email protected]
Quoted 7 lines · Jens Axboe
Quoted 4 lines · On Sat, Feb 03 2001, [email protected] wrote:
Feb  3 22:08:25 Line kernel: hdb: irq timeout: status=0xd0 { Busy }
Feb  3 22:08:25 Line kernel: hdb: DMA disabled
Feb  3 22:08:55 Line kernel: hdb: ATAPI reset timed-out, status=0x90
Feb  3 22:08:55 Line kernel: hda: DMA disabled

Try disabling DMA on the drive before accessing it.

Well, this has nothing to do with the above, but is there any utility or /proc entry that lets me say to my CD drive that it should not work at full speed?

Basically, some drives make way too much noise when they're operating at full speed. When I'd like to listen to some MP3s from a burned CD-R, what I'm currently doing is copying the files that I want to /tmp and listening from there, but this is obviously a dirty solution. :-(

Thanks in advance for any hints, Roger...

Signature · 7 lines
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
  Rogerio Brito - [email protected] - http://www.ime.usp.br/~rbrito/
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/
#9 lore raw

Re: Slowing down CDROM drives (was: Re: ATAPI CDRW which doesn't work)

In reply to [email protected]
Quoted 3 lines · Rogerio Brito

Well, this has nothing to do with the above, but is there any utility or /proc entry that lets me say to my CD drive that it should not work at full speed?

/proc/ide/hdX/settings ? The (current,init)_speed settings there?

Give it a try at least ;-)

Regards

Ingo Oeser

Signature · 6 lines
10.+11.03.2001 - 3. Chemnitzer LinuxTag <http://www.tu-chemnitz.de/linux/tag>
         <<<<<<<<<<<<       come and join the fun       >>>>>>>>>>>>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/
#10 lore raw

Re: Slowing down CDROM drives (was: Re: ATAPI CDRW which doesn't work)

Quoted 8 lines · Ingo Oeser
Quoted 3 lines · Rogerio Brito

Well, this has nothing to do with the above, but is there any utility or /proc entry that lets me say to my CD drive that it should not work at full speed?

/proc/ide/hdX/settings ? The (current,init)_speed settings there?

Give it a try at least ;-)

That is the ATA transfer rate between the device and the host only.

Andre Hedrick
Linux ATA Development
ASL Kernel Development
-----------------------------------------------------------------------------

ASL, Inc.                                     Toll free: 1-877-ASL-3535
1757 Houret Court                             Fax: 1-408-941-2071
Milpitas, CA 95035                            Web: www.aslab.com

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/

#11 lore raw

Re: Slowing down CDROM drives (was: Re: ATAPI CDRW which doesn't work)

In reply to [email protected]
Quoted 9 lines · Rogerio Brito

Well, this has nothing to do with the above, but is there any utility or /proc entry that lets me say to my CD drive that it should not work at full speed?

Basically, some drives make way too much noise when they're operating at full speed. When I'd like to listen to some MP3s from a burned CD-R, what I'm currently doing is copying the files that I want to /tmp and listening from there, but this is obviously a dirty solution. :-(

	ioctl(cd_fd, CDROM_SELECT_SPEED, speed);
Signature · 6 lines
Jens Axboe

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/
#12 lore raw

Re: Slowing down CDROM drives (was: Re: ATAPI CDRW which doesn't work)

In reply to [email protected]
Quoted 5 lines · Rogerio Brito
Quoted 3 lines

Well, this has nothing to do with the above, but is there any utility or /proc entry that lets me say to my CD drive that it should not work at full speed?

I missed the original post, but there is a mount flag "-o speed=" for precisely this purpose.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/

#13 lore raw

Re: Slowing down CDROM drives (was: Re: ATAPI CDRW which doesn't work)

In reply to [email protected]
Quoted 2 lines · Guest section DW

I missed the original post, but there is a mount flag "-o speed=" for precisely this purpose.

Hah, this I did not know. Checking the util-linux source, it might be a really good idea to not about if setting the speed fails. This will happen quite often on cd-r/w or dvd drives.

Signature · 6 lines
Jens Axboe

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/
#14 lore raw

Re: Slowing down CDROM drives (was: Re: ATAPI CDRW which doesn't work)

In reply to [email protected]
Quoted 1 line · Jens Axboe
	ioctl(cd_fd, CDROM_SELECT_SPEED, speed);

I'd like to thank everybody that replied either on the list and privately. I didn't know that I could just use the /proc entries to change the IDE driver speed with a simple:

echo current_speed:4 > /proc/ide/hdc/settings

(Thanks Mark for this).

I'd also like to thank Andries about the tip on the mount option. I didn't find anything in the util-linux (mount) manpage before I asked (I'm using Debian potato's util-linux 2.10q-1).

The option that I chose was to cook a little proggie to call the ioctl to set the speed. This is the most flexible solution (as it doesn't involve messing with fstab or being root to pass the mount option to mount). Thanks, Jens!

Thank you all very, very much for the amazing (and fast) help!

[]s, Roger...

Signature · 7 lines
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
  Rogerio Brito - [email protected] - http://www.ime.usp.br/~rbrito/
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/
#15 lore raw

Re: Slowing down CDROM drives (was: Re: ATAPI CDRW which doesn't work)

Quoted 8 lines · Rogerio Brito
Quoted 1 line · Jens Axboe
	ioctl(cd_fd, CDROM_SELECT_SPEED, speed);

I'd like to thank everybody that replied either on the list and privately. I didn't know that I could just use the /proc entries to change the IDE driver speed with a simple:

echo current_speed:4 > /proc/ide/hdc/settings

You can not it has nothing to do with the speed of the device but the transfer rate between the host and the device.

Andre Hedrick
Linux ATA Development
ASL Kernel Development
-----------------------------------------------------------------------------

ASL, Inc.                                     Toll free: 1-877-ASL-3535
1757 Houret Court                             Fax: 1-408-941-2071
Milpitas, CA 95035                            Web: www.aslab.com

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/

#16 lore raw

Re: Slowing down CDROM drives (was: Re: ATAPI CDRW which doesn't work)

In reply to [email protected]

Hi!

Quoted 11 lines
Quoted 9 lines

Well, this has nothing to do with the above, but is there any utility or /proc entry that lets me say to my CD drive that it should not work at full speed?

Basically, some drives make way too much noise when they're operating at full speed. When I'd like to listen to some MP3s from a burned CD-R, what I'm currently doing is copying the files that I want to /tmp and listening from there, but this is obviously a dirty solution. :-(

	ioctl(cd_fd, CDROM_SELECT_SPEED, speed);

Does this actually work? I helped my friend with partly broken cdrom (worked only at low speeds) and it did not have much effect. It did not make my cdrom quiet, either, AFAI can remember.
Pavel

Signature · 6 lines
I'm [email protected]. "In my country we have almost anarchy and I don't care."
Panos Katsaloulis describing me w.r.t. patents at [email protected]
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/
#17 lore raw

Re: Slowing down CDROM drives (was: Re: ATAPI CDRW which doesn't work)

In reply to [email protected]
Quoted 5 lines · Pavel Machek
Quoted 1 line
	ioctl(cd_fd, CDROM_SELECT_SPEED, speed);

Does this actually work? I helped my friend with partly broken cdrom (worked only at low speeds) and it did not have much effect. It did not make my cdrom quiet, either, AFAI can remember.

It's no news that vendors only implement what they want to. New cd-r/w and dvd drives are not required to implement this command, so it may not work there either.

Signature · 6 lines
Jens Axboe

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/
#18 lore raw

Re: Slowing down CDROM drives (was: Re: ATAPI CDRW which doesn't work)

Quoted 10 lines · Jens Axboe
Quoted 5 lines · Pavel Machek
Quoted 1 line
	ioctl(cd_fd, CDROM_SELECT_SPEED, speed);

Does this actually work? I helped my friend with partly broken cdrom (worked only at low speeds) and it did not have much effect. It did not make my cdrom quiet, either, AFAI can remember.

It's no news that vendors only implement what they want to. New cd-r/w and dvd drives are not required to implement this command, so it may not work there either.

Take a look at the code for cdparanoia or one of the other MP3 ripping programms. Slowing down the drive is a standard feature for that type of program. (Reduces errors when pulling audio tracks off the disc.)

[email protected] | Note to AOL users: for a quick shortcut to reply
Alan Olsen | to my mail, just hit the ctrl, alt and del keys.
"In the future, everything will have its 15 minutes of blame."

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/

#19 lore raw

Re: Slowing down CDROM drives (was: Re: ATAPI CDRW which doesn't work)

In reply to Jens Axboe
Quoted 7 lines · Alan Olsen
Quoted 3 lines

It's no news that vendors only implement what they want to. New cd-r/w and dvd drives are not required to implement this command, so it may not work there either.

Take a look at the code for cdparanoia or one of the other MP3 ripping programms. Slowing down the drive is a standard feature for that type of program. (Reduces errors when pulling audio tracks off the disc.)

One would think that you have taken a look at the cdparanoia source before posting something like this. Guess what it does to control speed? Reread my message, you totally missed the point.

Signature · 6 lines
Jens Axboe

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/
#20 lore raw

Re: Slowing down CDROM drives (was: Re: ATAPI CDRW which doesn't work)

Sorry. it was late when I answered that. (Either that or no ocffe, not certain which.)

Quoted 5 lines · Jens Axboe
Quoted 4 lines · Alan Olsen
Quoted 3 lines

It's no news that vendors only implement what they want to. New cd-r/w and dvd drives are not required to implement this command, so it may not work there either.

Quoted 12 lines
Quoted 3 lines

Take a look at the code for cdparanoia or one of the other MP3 ripping programms. Slowing down the drive is a standard feature for that type of program. (Reduces errors when pulling audio tracks off the disc.)

One would think that you have taken a look at the cdparanoia source before posting something like this. Guess what it does to control speed? Reread my message, you totally missed the point.

Signature · 1 line
Jens Axboe

[email protected] | Note to AOL users: for a quick shortcut to reply
Alan Olsen | to my mail, just hit the ctrl, alt and del keys.
"In the future, everything will have its 15 minutes of blame."

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/

#21 lore raw

Re: Slowing down CDROM drives (was: Re: ATAPI CDRW which doesn't work)

In reply to [email protected]
Quoted 7 lines · Pavel Machek

Hi!

Quoted 1 line
	ioctl(cd_fd, CDROM_SELECT_SPEED, speed);

Does this actually work? I helped my friend with partly broken cdrom (worked only at low speeds) and it did not have much effect. It did not make my cdrom quiet, either, AFAI can remember.

Well, I wrote a little program that just makes this call that Jens told me about and it worked perfectly with my hardware -- using my CD-ROM drive at speed 1, 2 or 4, it works quietly and I can listen to MP3s at volumes that I couldn't earlier.

OTOH, it seems that a paradox is happening: this very same drive has some problems (not always reproducible) reading some CD-RW discs when it operates at very slow speeds. In this case, the best that I can do is to let the drive accelerate as much as it wants and then it works ok.

BTW, Jens, what is the way to set the drive back to its maximum speed, without limits? Where could I read more about the subject (that is, this and other ioctl's) without annoying you? I'm a moderately competent C programmer (only moderately), but I know *nothing* about the kernel.

[]s, Roger...

Signature · 7 lines
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
  Rogerio Brito - [email protected] - http://www.ime.usp.br/~rbrito/
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/
#22 lore raw

Re: Slowing down CDROM drives

Quoted 1 line · Rogerio Brito
Quoted 1 line
Quoted 1 line
	ioctl(cd_fd, CDROM_SELECT_SPEED, speed);

Yes: pass 0 as the speed, in the ioctl() above.

Ion

Signature · 6 lines
  It is better to keep your mouth shut and be thought a fool,
            than to open it and remove all doubt.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/