Bug in 2.4.x??
Hi
Well, it may not be a bug, but it sure is bugging me - i have been on this for more than a week. Well, here goes;
Why is it that my DMA performance under the kernel 2.4.x is worse than the one under 2.2? I have attached the stats below the mail- information and test results under both kernels.
I use the following option under rc.local to set dma ; �������� /sbin/hdparm -c1 -d1 -m16 -X66 /dev/hda
I use resierfs, Iam disappointed that 2.4 results are about 1/3rd and need to know what to do.
I use a i810 mobo and seagate 8.4 gb hdd
I have tried recompiling the kernel - iam informed a broken .config could have caused this, but no change.
I have tried random settings with hdparm to tune /dev/hda.
Thanks for your time.
Ashwin
(Iam not on the list yet, so please cc me personally)
-------------------------
TEST RESULTS
___________________________
a) Kernel 2.2.17 (mandrake)
(i) hdpartm -i:/dev/hda:
�Model=ST38420A, FwRev=3.07, SerialNo=7AZ0PTZT
�Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% } �RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=0 �BuffType=unknown, BuffSize=512kB, MaxMultSect=16, MultSect=16 �CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=16841664 �IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120} �PIO modes: pio0 pio1 pio2 pio3 pio4
�DMA modes: mdma0 mdma1 mdma2 udma0 udma1 *udma2
(ii) hdpartm -t:/dev/hda:
�Timing buffered disk reads: �64 MB in �4.38 seconds = 14.61 MB/sec
b) Kernel 2.4.1 (linux )
(i) hdparm -i/dev/hda:
�Model=ST38420A, FwRev=3.07, SerialNo=7AZ0PTZT
�Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% } �RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=0 �BuffType=unknown, BuffSize=512kB, MaxMultSect=16, MultSect=16 �CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=16841664 �IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120} �PIO modes: pio0 pio1 pio2 pio3 pio4
�DMA modes: mdma0 mdma1 mdma2 udma0 udma1 *udma2
(ii) hdparm -t
/dev/hda:
�Timing buffered disk reads: �64 MB in 11.61 seconds = �5.51 MB/sec
Hello
the same behavior I have :
[root@localhost eugene]# uname -a
Linux localhost.localdomain 2.4.1 #1 Пнд Фев 12 23:19:20 /etc/localtime 2001 i686 unknown [root@localhost eugene]# hdparm -i /dev/hdb
/dev/hdb:
Model=ST38410A, FwRev=3.32, SerialNo=7EG23EXT
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4 BuffType=unknown, BuffSize=512kB, MaxMultSect=32, MultSect=32 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=16841664 IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3 udma4
[root@localhost eugene]# hdparm /dev/hdb
/dev/hdb:
multcount = 32 (on) I/O support = 1 (32-bit) unmaskirq = 0 (off) using_dma = 1 (on) keepsettings = 0 (off) nowerr = 0 (off) readonly = 0 (off) readahead = 8 (on)
geometry = 1048/255/63, sectors = 16841664, start = 0
[root@localhost eugene]# hdparm -t /dev/hdb
/dev/hdb:
Timing buffered disk reads: 64 MB in 8.00 seconds = 8.00 MB/sec
On Wed, 14 Feb 2001 09:38:18 +0530
Ashwin D <[email protected]> (by way of Ashwin D <[email protected]>) wrote:
ADAYCBWOAD> Hi
ADAYCBWOAD>
ADAYCBWOAD> Well, it may not be a bug, but it sure is bugging me - i have been on this ADAYCBWOAD> for more than a week. Well, here goes;
ADAYCBWOAD>
ADAYCBWOAD> Why is it that my DMA performance under the kernel 2.4.x is worse than the ADAYCBWOAD> one under 2.2? I have attached the stats below the mail- information and test ADAYCBWOAD> results under both kernels.
ADAYCBWOAD>
ADAYCBWOAD> I use the following option under rc.local to set dma ; ADAYCBWOAD> ════════ /sbin/hdparm -c1 -d1 -m16 -X66 /dev/hda
ADAYCBWOAD>
ADAYCBWOAD> I use resierfs, Iam disappointed that 2.4 results are about 1/3rd and need to ADAYCBWOAD> know what to do.
ADAYCBWOAD>
ADAYCBWOAD> I use a i810 mobo and seagate 8.4 gb hdd
ADAYCBWOAD>
ADAYCBWOAD> I have tried recompiling the kernel - iam informed a broken .config could ADAYCBWOAD> have caused this, but no change.
ADAYCBWOAD> I have tried random settings with hdparm to tune /dev/hda. ADAYCBWOAD>
ADAYCBWOAD> Thanks for your time.
ADAYCBWOAD> Ashwin
ADAYCBWOAD> (Iam not on the list yet, so please cc me personally) ADAYCBWOAD>
ADAYCBWOAD> -------------------------
ADAYCBWOAD> TEST RESULTS
ADAYCBWOAD> ___________________________
ADAYCBWOAD>
ADAYCBWOAD> a) Kernel 2.2.17 (mandrake)
ADAYCBWOAD>
ADAYCBWOAD> (i) hdpartm -i:
ADAYCBWOAD> /dev/hda:
ADAYCBWOAD>
ADAYCBWOAD> ═Model=ST38420A, FwRev=3.07, SerialNo=7AZ0PTZT
ADAYCBWOAD> ═Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
ADAYCBWOAD> ═RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=0
ADAYCBWOAD> ═BuffType=unknown, BuffSize=512kB, MaxMultSect=16, MultSect=16
ADAYCBWOAD> ═CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=16841664
ADAYCBWOAD> ═IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
ADAYCBWOAD> ═PIO modes: pio0 pio1 pio2 pio3 pio4
ADAYCBWOAD> ═DMA modes: mdma0 mdma1 mdma2 udma0 udma1 *udma2ADAYCBWOAD>
ADAYCBWOAD> (ii) hdpartm -t:
ADAYCBWOAD> /dev/hda:
ADAYCBWOAD> ═Timing buffered disk reads: ═64 MB in ═4.38 seconds = 14.61 MB/sec ADAYCBWOAD>
ADAYCBWOAD>
ADAYCBWOAD> b) Kernel 2.4.1 (linux )
ADAYCBWOAD>
ADAYCBWOAD> (i) hdparm -i
ADAYCBWOAD> /dev/hda:
ADAYCBWOAD>
ADAYCBWOAD> ═Model=ST38420A, FwRev=3.07, SerialNo=7AZ0PTZT
ADAYCBWOAD> ═Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
ADAYCBWOAD> ═RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=0
ADAYCBWOAD> ═BuffType=unknown, BuffSize=512kB, MaxMultSect=16, MultSect=16
ADAYCBWOAD> ═CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=16841664
ADAYCBWOAD> ═IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
ADAYCBWOAD> ═PIO modes: pio0 pio1 pio2 pio3 pio4
ADAYCBWOAD> ═DMA modes: mdma0 mdma1 mdma2 udma0 udma1 *udma2ADAYCBWOAD>
ADAYCBWOAD> (ii) hdparm -t
ADAYCBWOAD>
ADAYCBWOAD> /dev/hda:
ADAYCBWOAD> ═Timing buffered disk reads: ═64 MB in 11.61 seconds = ═5.51 MB/sec ADAYCBWOAD> -
ADAYCBWOAD> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in ADAYCBWOAD> the body of a message to [email protected] ADAYCBWOAD> More majordomo info at http://vger.kernel.org/majordomo-info.html
ADAYCBWOAD> Please read the FAQ at http://www.tux.org/lkml/
--