2001-02-14 release of hotplug scripts
I've just packaged up the latest hotplug scripts into a release, and they can be found at:
http://download.sourceforge.net/linux-hotplug/hotplug-2001_02_14.tar.gz http://download.sourceforge.net/linux-hotplug/hotplug-2001_02_14-1.noarch.rpm http://download.sourceforge.net/linux-hotplug/hotplug-2001_02_14-1.src.rpm
depending on which format you prefer.
Changes in this version from the last release are:
- rpm makes the subsystem scripts executable
- some logging fixes
- insistence on having a writable /tmp so bash works properly
- added support for pcimodules
- Fixes some problems seen with Redhat 7 systems when the partial USB setup in /etc/rc.sysinit was not disabled. The failure mode was that all USB modules got loaded, rather than only modules for the devices that were connected.
- In conjunction with the "usbmodules" and "pcimodules" patches to "usbutils-0.7" and "pciutils-2.1.8", devices that are connected at boot time will also be configured. If you don't have those utilities, you'll need to plug USB and CardBus devices in after the system is booted, otherwise they can't be properly configured.
- other small fixes.
If you haven't patched your version of usbutils and pciutils, you can get the patch at:
http://marc.theaimsgroup.com/?l=linux-hotplug-devel&m=98141435915986&w=2
Hopefully updated versions of these two packages will be released with these changes in them soon.
thanks,
greg k-h
Signature · 1 line
greg@(kroah|wirex).com