Skip to contentSkip to conversation

aic7xxx plans

DISCUSSION J . A . Magallon 6 participants 10 messages Feb 14, 2001 – Feb 15, 2001

lore
Share & tools
lore
#0 lore raw

Hi.

I have read in the Doug Ledford www page that the drivers for the aic7xxx card are going to a more or less unmantained state, 'cause he has not the time. And also recommends to use the Justin Gibbs's ones from FreeBSD. They are now at version 6.1.1, no more beta.

Are there any plans of switching the drivers ? I have tried to patch 2.4.1-acX, but there are rejected hunks and had no time to patch manually and make a diff.

Signature · 4 lines
J.A. Magallon                                                      $> cd pub
mailto:[email protected]                                          $> more beer

Linux werewolf 2.4.1-ac10 #1 SMP Sun Feb 11 23:36:46 CET 2001 i686
#1 lore raw
Quoted 3 lines

Are there any plans of switching the drivers ? I have tried to patch 2.4.1-acX, but there are rejected hunks and had no time to patch manually and make a diff.

I dont plan to switch them yet a while, and never for 2.2. For 2.5 its a total nobrainer that we move to Justins driver or move to Justins driver post crudfixing that may be needed to make it clean and Linuxish

#2 lore raw
Quoted 3 lines

I dont plan to switch them yet a while, and never for 2.2. For 2.5 its a total nobrainer that we move to Justins driver or move to Justins driver post crudfixing that may be needed to make it clean and Linuxish

Can you be more specific about your complaints?

--
Justin

#3 lore raw
Quoted 5 lines
Quoted 3 lines

I dont plan to switch them yet a while, and never for 2.2. For 2.5 its a total nobrainer that we move to Justins driver or move to Justins driver post crudfixing that may be needed to make it clean and Linuxish

Can you be more specific about your complaints?

Im not complaining ?

#4 lore raw
In reply to J . A . Magallon
Quoted 7 lines · Alan Cox
Quoted 3 lines

Are there any plans of switching the drivers ? I have tried to patch 2.4.1-acX, but there are rejected hunks and had no time to patch manually and make a diff.

I dont plan to switch them yet a while, and never for 2.2. For 2.5 its a total nobrainer that we move to Justins driver or move to Justins driver post crudfixing that may be needed to make it clean and Linuxish

I forget the location, where can I get this patch? I'm running 2.4.1 on an alpha which has nothing but problems with the aha-2940uw card I have installed.

Signature · 1 line
 Lab tests show that use of micro$oft causes cancer in lab animals
#5 lore raw

See http://www.freebsd.org/~gibbs/linux.

Quoted 14 lines
Quoted 7 lines · Alan Cox
Quoted 3 lines

Are there any plans of switching the drivers ? I have tried to patch 2.4.1-acX, but there are rejected hunks and had no time to patch manually and make a diff.

I dont plan to switch them yet a while, and never for 2.2. For 2.5 its a total nobrainer that we move to Justins driver or move to Justins driver post crudfixing that may be needed to make it clean and Linuxish

I forget the location, where can I get this patch? I'm running 2.4.1 on an alpha which has nothing but problems with the aha-2940uw card I have installed.

#6 lore raw

Re: aic7xxx (and sym53c8xx) plans

In reply to Wakko Warner

According to Matthew Jacob:

Quoted 1 line

See http://www.freebsd.org/~gibbs/linux.

Here at VA we're already using Jason's driver -- it works on the Intel STL2 motherboard, while Doug's driver doesn't (or didn't, a month ago).

While we're discussing SCSI drivers, I'd also like to put in a good word for the Sym-2 Symbios/NCR drivers from Gerard Roudier:

    ftp://ftp.tux.org/roudier/drivers/portable/sym-2.1.x/

Joe-Bob says: "Check it out."

Signature · 2 lines
Chip Salzenberg            - a.k.a. -            <[email protected]>
   "Give me immortality, or give me death!"  // Firesign Theatre
#7 lore raw

Re: aic7xxx (and sym53c8xx) plans

Quoted 5 lines · Chip Salzenberg

According to Matthew Jacob:

Quoted 1 line

See http://www.freebsd.org/~gibbs/linux.

Here at VA we're already using Jason's driver -- it works on the Intel STL2 motherboard, while Doug's driver doesn't (or didn't, a month ago).

"Justin" not "Jason"

Quoted 7 lines

While we're discussing SCSI drivers, I'd also like to put in a good word for the Sym-2 Symbios/NCR drivers from Gerard Roudier:

    ftp://ftp.tux.org/roudier/drivers/portable/sym-2.1.x/

Joe-Bob says: "Check it out."

Yes indeed. And he also support FreeBSD too. Very excellent.

Maybe the two of *them* can convince Linus to take the !$*!)$*!)$*~$)* patch to scsi_syms.c that exports the add/del timer functions....

#8 lore raw

Re: aic7xxx (and sym53c8xx) plans

Quoted 2 lines

Maybe the two of *them* can convince Linus to take the !$*!)$*!)$*~$)* patch to scsi_syms.c that exports the add/del timer functions....

Umm Eric Youngdale is Mr SCSI

#9 lore raw
In reply to Wakko Warner
Quoted 3 lines

I forget the location, where can I get this patch? I'm running 2.4.1 on an alpha which has nothing but problems with the aha-2940uw card I have installed.

You would do. The AIC7xxx driver in 2.4 < 2.4.1ac10 or so is not 64bit clean Give 2.4.1ac12 a spin or try Justins driver (dont have the URL handy)