Skip to contentSkip to conversation

ServeRaid 4M with IBM netfinity and kernel 2.4.x

DISCUSSION St�phane Borel 3 participants 3 messages Feb 16, 2001

lore
Share & tools
lore
#0 lore raw

We have a problem here that make the filesystem crash during big files transfer (>1M). It only happens with kernel 2.4.x ; with 2.2.18, it is very stable and fast.

I have seen a thread some time ago concerning such problem but is there a solution against it now ?

I should add that the behaviour of serveraid under 2.4 is somehow strange : during fsck for instance, it seems to get stuck and won't go further if we don't strike a key on the keyboard.

Signature · 1 line
Stef
#1 lore raw
Quoted 3 lines

We have a problem here that make the filesystem crash during big files transfer (>1M). It only happens with kernel 2.4.x ; with 2.2.18, it is very stable and fast.

I don't believe IBM have provided an 'official' 2.4 patch set for the serveraid yet so there may be bugs lurking.

Quoted 3 lines

I should add that the behaviour of serveraid under 2.4 is somehow strange : during fsck for instance, it seems to get stuck and won't go further if we don't strike a key on the keyboard.

Yes this has also been seen. At the time you have to do this it appears that the Linux system is not waiting for the keyboard. It only happens on specific IBM netfinities too. Perhaps someone at IBM can trace it down a bit further since I certainly suspect we upset the firmware.

Alan

#2 lore raw
In reply to St�phane Borel
Quoted 3 lines · Stéphane Borel

I should add that the behaviour of serveraid under 2.4 is somehow strange : during fsck for instance, it seems to get stuck and won't go further if we don't strike a key on the keyboard.

It just a gues, but try disable write back cache. I had similar problems with intel crcu31 RAID controller.

Good luck.
--
Andrius
[email protected]