Changes to ide-cd for 2.4.1 are broken?
Specifically, this part:
@@ -2324,11 +2309,17 @@
sense.ascq == 0x04)
return CDS_DISC_OK;+
+ /*
+ * If not using Mt Fuji extended media tray reports,
+ * just return TRAY_OPEN since ATAPI doesn't provide
+ * any other way to detect this...
+ */
if (sense.sense_key == NOT_READY) {- /* ATAPI doesn't have anything that can help
- us decide whether the drive is really
- emtpy or the tray is just open. irk. */
- return CDS_TRAY_OPEN;
+ if (sense.asc == 0x3a && (!sense.ascq||sense.ascq == 1))
+ return CDS_NO_DISC;
+ else
+ return CDS_TRAY_OPEN;
}My tray is open as I type, and it is misreported as CDS_NO_DISC. In 2.4.0 it worked fine.
# strace cdd
execve("/trusted/bin/cdd", ["cdd"], [/* 35 vars */]) = 0
open("/dev/cdrom", O_RDONLY|O_NONBLOCK) = 5
ioctl(5, CDROM_DRIVE_STATUS, 0) = 1
write(1, "No disc in drive\n", 17No disc in drive
) = 17
_exit(0) = ?Quoted 1 line
From
linux/include/linux/cdrom.h:
#define CDS_NO_INFO 0 /* if not implemented */
#define CDS_NO_DISC 1
#define CDS_TRAY_OPEN 2
#define CDS_DRIVE_NOT_READY 3
#define CDS_DISC_OK 4
(The usual plug: download my beautifully minimalistic but featureful hand coded assembly cd player from
http://john.snoop.dk/programs/linux/asm-toys).
Some miscellaneous hardware details from dmesg:
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ALI15X3: IDE controller on PCI bus 00 dev 78
PCI: Hardcoded IRQ 14 for device 00:0f.0
ALI15X3: chipset revision 32
ALI15X3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:piohda: SAMSUNG VG36483A (6.48GB), ATA DISK drive
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hdc: IBM-DTLA-305020, ATA DISK drive
hdd: TOSHIBA DVD-ROM SD-M1102, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 12685680 sectors (6495 MB) w/494KiB Cache, CHS=789/255/63, (U)DMA
hdc: 40188960 sectors (20577 MB) w/380KiB Cache, CHS=39870/16/63, (U)DMA
hdd: ATAPI 24X DVD-ROM drive, 256kB Cache
Uniform CD-ROM driver Revision: 3.12
Signature · 1 line
http://www.penguinpowered.com/~vii
Quoted 23 lines · John Fremlin
Specifically, this part:
(quoted diff) +10
-4@@ -2324,11 +2309,17 @@ sense.ascq == 0x04) return CDS_DISC_OK; + + /* + * If not using Mt Fuji extended media tray reports, + * just return TRAY_OPEN since ATAPI doesn't provide + * any other way to detect this... + */ if (sense.sense_key == NOT_READY) { - /* ATAPI doesn't have anything that can help - us decide whether the drive is really - emtpy or the tray is just open. irk. */ - return CDS_TRAY_OPEN; + if (sense.asc == 0x3a && (!sense.ascq||sense.ascq == 1)) + return CDS_NO_DISC; + else + return CDS_TRAY_OPEN; }
Quoted 2 lines
My tray is open as I type, and it is misreported as
CDS_NO_DISC. In 2.4.0 it worked fine.
Your drive is broken, the only other valid combination is 0x3a/0x02 which means no media and tray open. You could try and dump the asc and ascq to see what your drive reports for the different states.
Signature · 1 line
Jens Axboe