Skip to contentSkip to conversation

How to set hdparms for ide-scsi devices on devfs?

DISCUSSION Eduard Hasenleithner 5 participants 7 messages Feb 28, 2001 – Mar 2, 2001

lore
Share & tools
lore
#0 lore raw

Sorry, if this issue was already discussed in lkml. I didn't find a reference to this at www.geocrawler.com

My Problem:
I want to set the unmaskirq and dma -flag for my ide cd-recorder. The Problem is, that devfs creates no ide device, but only the /dev/scsi/../{cd,general} devices are created. And hdparm don't accepts this devices for setting the ide-parameters.

My current workaround is to create a /dev/hd? device "by hand" at system startup. This is not very beautiful. Furthermore, if the device numbers in devfs are deactivated, this won't work anymore.

I can live with my current solution. But i would be very happy if someone can present a clean solution.

I posted this message intentionally not on the devfs mailing list as i think this problem is related to accessing the same device through different /dev entries. Under devfs, the /dev/ide/... device node gets allocated after the corresponding ide-xx.o has been loaded. But this is not possible with ide-scsi claiming the device :(

Thanks in advance

Signature · 3 lines
Eduard Hasenleithner
student of
Salzburg University of Applied Sciences and Technologies
#1 lore raw

procfs

echo unmaskirq:1 /proc/ide/hdx/settings

Andre Hedrick
Linux ATA Development
ASL Kernel Development
-----------------------------------------------------------------------------

ASL, Inc.                                     Toll free: 1-877-ASL-3535
1757 Houret Court                             Fax: 1-408-941-2071
Milpitas, CA 95035                            Web: www.aslab.com
#2 lore raw
In reply to Eduard Hasenleithner
Quoted 5 lines · Andre Hedrick

procfs

echo unmaskirq:1 /proc/ide/hdx/settings

Thank you, thats perfect. Is setting the parameters a relatively new feature? I searched for a possibiliy like this and found no references.

PS: Is there still a possibility for setting the IDE-sleep timeout
for a ide-scsi harddisk? (I know, this doesnt make sense)

Signature · 3 lines
Eduard Hasenleithner
student of
Salzburg University of Applied Sciences and Technologies
#3 lore raw
In reply to Eduard Hasenleithner
Quoted 2 lines

PS: Is there still a possibility for setting the IDE-sleep timeout
for a ide-scsi harddisk? (I know, this doesnt make sense)

I didn't know you could use ide-scsi emulation for hard drives.

Signature · 1 line
 Lab tests show that use of micro$oft causes cancer in lab animals
#4 lore raw

There are mystert ATAPI harddrives in the world!

Quoted 13 lines · Wakko Warner
Quoted 2 lines

PS: Is there still a possibility for setting the IDE-sleep timeout
for a ide-scsi harddisk? (I know, this doesnt make sense)

I didn't know you could use ide-scsi emulation for hard drives.

Signature · 6 lines
 Lab tests show that use of micro$oft causes cancer in lab animals
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Andre Hedrick
Linux ATA Development
ASL Kernel Development
-----------------------------------------------------------------------------

ASL, Inc.                                     Toll free: 1-877-ASL-3535
1757 Houret Court                             Fax: 1-408-941-2071
Milpitas, CA 95035                            Web: www.aslab.com
#5 lore raw
In reply to Eduard Hasenleithner
Quoted 2 lines · Wakko Warner
Quoted 2 lines

PS: Is there still a possibility for setting the IDE-sleep timeout
for a ide-scsi harddisk? (I know, this doesnt make sense)

Yeah, why would you ? ide-scsi is mainly to support cd-rw
drives, AFAIK

Quoted 11 lines

I didn't know you could use ide-scsi emulation for hard drives.

--
Lab tests show that use of micro$oft causes cancer in lab animals
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

#6 lore raw
In reply to Eduard Hasenleithner
Quoted 7 lines · Jeremy Jackson
Quoted 2 lines · Wakko Warner
Quoted 2 lines

PS: Is there still a possibility for setting the IDE-sleep timeout
for a ide-scsi harddisk? (I know, this doesnt make sense)

Yeah, why would you ? ide-scsi is mainly to support cd-rw
drives, AFAIK

It's a general SCSI-over-ATAPI interface, and as such regular ATA hard drives cannot be run with ide-scsi.

Signature · 1 line
Jens Axboe